Renovation and furniture work of Ground, First, Second and Third floor, ACS Home Secretary Chamber at First floor of Home Departement, Block No.-02, New Sachivalay, Gandhinagar. (Including Electrification)

SCHEDULE -B WITH RATE

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

1 Dismentaling tiled or stone floors laid in mortar including stacking of serviceable material and 3889.00 Smt 49.61 Rs. Forty Nine & Paise Sixty One Only

disposal of unserviceable material with all lead and lift.

2 Demolition & disposal of unserviceable materials with all lead and lift. (II) reinforcement cement 1.00 Cmt 1099.75 Rs. One Thousand Ninety Nine & Paise

concrete. Seventy Five Only

3 Demolition & disposal of unserviceable materials with all lead and lift. (II) Unreinforcement cement 9.00 Cmt 633.39 Rs. Six Hundred Thirty Three & Paise

concrete. Thirty Nine Only

4 Demolition of brick work and stone masonry including stacking of serviceable materials and 79.00 Cmt 572.20 Rs. Five Hundred Seventy Two & Paise

disposal of unserviceable materials with all lead and lift (ii) Cement mortar Twenty Only

5 Dismentaling doors, windows, vetilators etc. (wood or steel) shutters including chokthas, 242.00 No. 261.29 Rs. Two Hundred Sixty One & Paise

architraves, holdfast and other attachment etc.complete and stacking the material with all lead Twenty Nine Only

and lift. (ii) exceeding 3 smt in area.

6 Dismantaling sanitary fiting like wash basin , w.c. pan indian europeaan type, flushing tank etc 27.00 No. 421.71 Rs. Four Hundred Twenty One & Paise

including stacking the material with all laed and lift. Seventy One Only

7 Dismetaling c.i. pipes, g.s.w pipes and a.c. rain water pipes with fitting and clamp including 70.00 Rmt 77.73 Rs. Seventy Seven & Paise Seventy

stacking the materials with all lead and lift(for any diameter of pipe) Three Only

8 Dismantling alluminium partition asbestos Hard board in ceiling or partition walls, wooden trellis 4938.00 Smt 30.00 Rs. Thirty Only

work including frames, stacking of the serviceable materials and disposal of unserviceable

materials with all lead and lift

9 Credit Value for Door Shutter, Cupboard shutter and removed from site and clean site. As per 97.00 No. -400.00 Rs. Minus Four Hundred Only -38800.00

engineer in charge.

10 Credit Value for Window and removed from site and clean site. As per engineer in charge. 142.00 No. -300.00 Rs. Minus Three Hundred Only -42600.00

11 Credit value for old G.I. Pipe of any dia meter and removed from site and clean site. As per 70.00 Rmt -15.00 Rs. Minus Fifteen Only -1050.00

engineer in charge.

12 BRICK WORK using common burnt clay building bricks having crushing strength not less than 35 12.00 Cum. 4458.23 Rs. Four Thousand Four Hundred Fifty

Kg./Sq cm. In super structure above plinth level upto floor two level. Conventional bricks in cement Eight & Paise Twenty Three Only

moratar 1 : 6 ( 1 cement : 6 coarse sand) for GROUND FLOOR

13 BRICK WORK using common burnt clay building bricks having crushing strength not less than 35 31.00 Cum. 4499.93 Rs. Four Thousand Four Hundred

Kg./Sq cm. In super structure above plinth level upto floor two level. Conventional bricks in cement Ninety Nine & Paise Ninety Three Only

moratar 1 : 6 ( 1 cement : 6 coarse sand) for FIRST FLOOR

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

14 BRICK WORK using common burnt clay building bricks having crushing strength not less than 35 25.00 Cum. 4541.63 Rs. Four Thousand Five Hundred Forty

Kg./Sq. cm. In cement mortar 1 : 6 ( 1 cement : 6 coarse sand ( Conventional Bricks ) for Second One & Paise Sixty Three Only

15 BRICK WORK using common burnt clay building bricks having crushing strength not less than 35 25.00 Cum. 4583.33 Rs. Four Thousand Five Hundred Eighty

Kg./Sq. cm. In cement mortar 1 : 6 ( 1 cement : 6 coarse sand ( Conventional Bricks ) for Third Three & Paise Thirty Three Only

16 HALF BRICK masonary in common brunt clay building bricks having crusing strength not less than 144.00 Smt 679.00 Rs. Six Hundred Seventy Nine Only

35 kg./sq.cm.in cement mortar 1:4 (1 cement : 4 coarse sand ) conventional bricks for Ground

17 HALF BRICK masonary in common brunt clay building bricks having crusing strength not less than 201.00 Smt 685.24 Rs. Six Hundred Eighty Five & Paise

35 kg./sq.cm.in cement mortar 1:4 (1 cement : 4 coarse sand ) conventional bricks for First Floor. Twenty Four Only

18 HALF BRICK masonary in common brunt clay building bricks having crusing strength not less than 144.00 Smt 691.48 Rs. Six Hundred Ninety One & Paise

35 kg./sq.cm.in cement mortar 1:4 (1 cement : 4 coarse sand ) conventional bricks for Second Forty Eight Only

19 HALF BRICK masonary in common brunt clay building bricks having crusing strength not less than 144.00 Smt 697.72 Rs. Six Hundred Ninety Seven & Paise

35 kg./sq.cm.in cement mortar 1:4 (1 cement : 4 coarse sand ) conventional bricks for Third Floor. Seventy Two Only

20 Providing 10 mm thick cement PLASTER in single coat on ceilings for interior plastering and finished 1000.00 Smt 209.88 Rs. Two Hundred Nine & Paise Eighty

even & smooth in C.M. 1: 3 ( 1 cement : 3 sand ) including finishing with a floating coat of neat Eight Only

cement slurry at GROUND FLOOR.

21 Providing 10 mm thick cement PLASTER in single coat on ceilings for interior plastering and finished 1010.00 Smt 236.99 Rs. Two Hundred Thirty Six & Paise

even & smooth in C.M. 1: 3 ( 1 cement : 3 sand ) including finishing with a floating coat of neat Ninety Nine Only

cement slurry at FIRST FLOOR.

22 Providing 10 mm thick cement PLASTER in single coat on ceilings for interior plastering and finished 1000.00 Smt 264.10 Rs. Two Hundred Sixty Four & Paise Ten

even & smooth in C.M. 1: 3 ( 1 cement : 3 sand ) including finishing with a floating coat of neat Only

cement slurry at SECOND FLOOR.

23 Providing 10 mm thick cement PLASTER in single coat on ceilings for interior plastering and finished 1000.00 Smt 291.21 Rs. Two Hundred Ninety One & Paise

even & smooth in C.M. 1: 3 ( 1 cement : 3 sand ) including finishing with a floating coat of neat Twenty One Only

cement slurry at THIRD FLOOR.

24 Providing 15mm thick cement plaster in single coat on brick or concrete wall for interior plastering 1386.00 Smt 213.51 Rs. Two Hundred Thirteen & Paise Fifty

and finished even and smooth in cement mortar 1:4(1-cement;4-sand) including finishing with a One Only

floating coat of neat cement slurry at Ground Floor.

25 Provinding 15 mm thick cement PLASTER in single coat on brick or concrete wall for interior 1436.00 Smt 242.77 Rs. Two Hundred Forty Two & Paise

plastering and finished even and smooth in C.M. 1:4 ( 1 cement : 4 sand ) including finishing with Seventy Seven Only

floating coat of neat cement slurry at FIRST FLOOR.

26 Provinding 15 mm thick cement PLASTER in single coat on brick or concrete wall for interior 1288.00 Smt 272.03 Rs. Two Hundred Seventy Two & Paise

plastering and finished even and smooth in C.M. 1:4 ( 1 cement : 4 sand ) including finishing with Three Only

floating coat of neat cement slurry at SECOND FLOOR.

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

27 Provinding 15 mm thick cement PLASTER in single coat on brick or concrete wall for interior 1288.00 Smt 301.29 Rs. Three Hundred One & Paise Twenty

plastering and finished even and smooth in C.M. 1:4 ( 1 cement : 4 sand ) including finishing with Nine Only

floating coat of neat cement slurry at THIRD FLOOR.

28 Applying general insecticide pest control treatment to floors, cupboards etc including labour 3774.00 Smt 90.72 Rs. Ninety & Paise Seventy Two Only

material etc. complete. Using Heptachloride 20 EC. As Per 6113_pests Consentration Weight

percent is recommended one litre chemical emulsion dillute with 39 liter of water will give. Total

dillute concrentration will be 40 litre inclusive of one litre chemical emulsion appication 0.5 Litre

chemical / Sqm of surface is recommended as per I.S code

29 Providing and Fixing Granite Telephonic Black Colour 18 mm thick for jambs and sills of doors & 708.00 Smt 2428.00 Rs. Two Thousand Four Hundred

windows using neat cement slurry laid over 20 mm average base of cement mortar 1:1(1 cement:1 Twenty Eight Only

Coarse Sand) and jointed with grey cement slurry including racking(Tancha Work) rubbing and

polishing,scaffoldings,tools and tackles,scaffolding etc. complete(with base of neat cement) as per

direction of Engineer in charge including rounding the exposed edges as directed.

30 Counter basin Supply and fix 16 to 18 mm thick granite counters with 600mm wide facia fixed to 1.00 Smt 4699.16 Rs. Four Thousand Six Hundred Ninety

with kota stone support . Rate should include for washbasin cutout/ Hole Cutout/ cutting the slab Nine & Paise Sixteen Only

to required size and for supporting arrangements for the slab.

31 Provinding & laying 800x800mm / 1200x600mm vitrified 8mm thick tile flooring over 20 mm 79.00 Smt 1453.19 Rs. One Thousand Four Hundred Fifty

(average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing Three & Paise Ninteen Only

flooring by adhesive material including dismentaling of existing flooring and material jointed with

color cement slurry including finised with flush pointing & cleaning the surface etc. complete for

antiskid. size and shade of tiles shall be as per approved architecture drawing and as per direction

of engineer-in-charge. For all Floor with epoxy 3mm groove filling.

32 Provinding & laying Printed / Coloured GLAZED TILES 8mm thick in skirting, risers of steps and 324.00 Smt 1498.30 Rs. One Thousand Four Hundred Ninety

DADO on 10mm thick cement plaster 1: 3 ( 1 cement : 3 coarse sand ) & jointed with white cement Eight & Paise Thirty Only

slurry. size and shade of tiles shall be as per approved architecture drawing and as per direction of

engineer-in-charge for all floors .

33 Constructing of cooking platform ( sandwich type ) 68cm width and 80cm high resting on thick 8.00 Rmt 3758.34 Rs. Three Thousand Seven Hundred

sandwiched polish Granite Slab in C.M 1:3 with providing and fixing 25 mm thick rough kota stone Fifty Eight & Paise Thirty Four Only

at bottom and 25 mm thick Polish Granite stone ( single piece/ telephonic Black ) top and polished

granite stone (single piece/ telephonic Black ) 25mm thick on top with 15mm high machine cut

polished granite round moulded facia patty including polishing etc . complete as per drawing and

specification without stainless steel sink including necessary cutting for sink & making hole for gas

pipe and fixing P.V.C bend of 25mm dia.

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

34 Providing & Laying 800x800mm / 1200x600mm Double Charge vitrified 8 to 10 mm thick tile 4024.00 Sqm. 1580.10 Rs. One Thousand Five Hundred Eighty

flooring over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new & Paise Ten Only

surface orfixing on existing flooring by adhesive including dismentaling of existing flooring and

material jointed with color cement slurry including finised with flush pointing & cleaning the

surface etc. complete for all Floors. Material shall be used as per approved make list by GSPHCL

with epoxy 3mm groove filling.

35 Providing & Laying 800x800mm / 1200x600mm Double Charge vitrified 8 to 10 mm thick tile 724.00 Sqm. 1371.30 Rs. One Thousand Three Hundred

Skirting riser of Step and Dedo On 10mm Thick Cement plaster mortar 1:3 ( 1 cement: 3 coarse Seventy One & Paise Thirty Only

sand) & Jointed with Colour Cement Slury including finised with flush pointing & cleaning the

surface etc. complete for all Floors. Material shall be used as per approved make list by GSPHCL

with epoxy 3mm groove filling.

36 Providing & Fixing Wall Hung with PVC Flush Tank, Soft Seat Cover & intergal "P" or "S" Trap 12.00 No. 5470.90 Rs. Five Thousand Four Hundred

including Jointing the Trap with Pan and Soil pipe. Wall hung shall be fixed on S.S heavy duty rack Seventy & Paise Ninety Only

bolt having 16mm dia, 165mm length using Plastic sleeve Make by Using Drill Bitt Only. Rate are

inclusive of all matreials, Labour & Necessary Fittings etc. Complete as per Detailed Drawings,

Specifications and as per the Instruction of Engineer In charge. The Model & Make of Wall Hung &

Flush Tank Shall be as per the Approved Make List of GSPHCL.

37 Providing & Fixing Single Hole Wash Basin with C.I or M.S. brackete & M. I . fisher union, P.V.C 12.00 No. 3935.33 Rs. Three Thousand Nine Hundred

water pipe with Connection from Stop Cock to Pillar Tap, PVC Bottle Trap with Connection 32mm Thirty Five & Paise Thirty Three Only

dia. C.P. brassa waste coupling etc. Complete. Rate are inclusive of all matreials, Labour &

Necessary Fittings etc. Complete as per Detailed Drawings, Specifications and as per the Instruction

of Engineer In charge. The Model & Make of Wash Basin Shall be as per the Approved Make List of

38 Providing & Fixing Urinal with P.V.C water pipe, 32mm dia. C.P. brassa waste coupling with 12.00 No. 2132.80 Rs. Two Thousand One Hundred Thirty

Connection 32mm dia waste Pipe etc. Complete. Rate are inclusive of all matreials, Labour & Two & Paise Eighty Only

Necessary Fittings etc. Complete as per Detailed Drawings, Specifications and as per the Instruction

of Engineer In charge. The Model & Make of Urinal Shall be as per the Approved Make List of

39 Providing & Fixing Two way Bib Tap with Wall Flange. Rate are inclusive of all matreials, Labour & 12.00 No. 1309.39 Rs. One Thousand Three Hundred Nine

Necessary Fittings etc. Complet as per Detailed Drawings, Specifications and as per the Instruction & Paise Thirty Nine Only

of Engineer In charge. The Model & Make of Two way Bib Tap Shall be as per the Approved Make

List of G.S.P.H.C.L.

40 Providing & Fixing Health faucets (ABS body). Rate are inclusive of all materials, Labour & 12.00 No. 565.51 Rs. Five Hundred Sixty Five & Paise Fifty

Necessary Fittings etc. Complete as per Detailed Drawings, Specifications and as per the Instruction One Only

of Engineer In Charge. The Model & Make of Health Faucets shall be as per the Approved Make List

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

41 Providing & Fixing 15mm One way Bib Tap with Wall Flange. Rate are inclusive of all matreials, 12.00 No. 990.61 Rs. Nine Hundred Ninety & Paise Sixty

Labour & Necessary Fittings etc. Complet as per Detailed Drawings, Specifications and as per the One Only

Instruction of Engineer In charge. The Model & Make of 15mm One way Bib Tap Shall be as per the

Approved Make List of G.S.P.H.C.L.

42 Providing & Fixing Wall Mounted Sink Cock with Extended Swivel Spout & Wall Flange . Rate are 1.00 No. 1330.32 Rs. One Thousand Three Hundred

inclusive of all matreials, Labour & Necessary Fittings etc. Complete as per Detailed Drawings, Thirty & Paise Thirty Two Only

Specifications and as per the Instruction of Engineer In charge. The Model & Make of Sink Cock

Shall be as per the Approved Make List of GSPHCL.

43 Providing and Fixing Stainless Steel (304 Grade) 1mm thick Matt / Satin Finish Kitchen Sink of over 1.00 No. 3695.00 Rs. Three Thousand Six Hundred Ninety

all Minimum size 533mm x 457mm x 203mm deep having bowl Minimum size 470mm x 395mm x Five Only

203mm Finishing with cement mortar 1:3 (1-Cement : 3-Fine Sand) etc. Complete. Rate including

of 32mm dia. C.P. Brass Waste Coupling and 32mm dia. Rigid PVC Waste Pipe upto N.T. (S.S.

Kitchen Sink Shall be of Nirali, Navkar, Carysil or Krishna make Only) for ALL FLOORS.

44 Glass Mirror with LED light : 1.370x0.76:- 1.00 No. 18664.33 Rs. Eighteen Thousand Six Hundred

Providing and fixing LED illuminated glass mirror made from high quality mirror glass with Sixty Four & Paise Thirty Three Only

integrated LED lighting all around or as specified, complete with necessary backing support, edge

finishing, electrical connections, driver, fixing accessories and testing, properly installed to provide

a neat and elegant appearance. The rate is inclusive of all mirror glass, LED lights, driver, wiring,

fittings, labour, tools and tackles, handling, wastage, etc. complete as directed by the Engineer-in-

45 Provinding and fixing 600mm x 450mm bevelled edge MIRROR or superior glass mounted on 6mm 11.00 No. 850.90 Rs. Eight Hundred Fifty & Paise Ninety

thick A.C. sheet of plywood sheet fixed to wooden plugs with C.P. brass screws & washers. Only

46 Providing & Fixing Towel Ring. Rate are inclusive of all matreials, Labour & Necessary Fittings etc. 12.00 No. 909.08 Rs. Nine Hundred Nine & Paise Eight

Complet as per Detailed Drawings, Specifications and as per the Instruction of Engineer In charge. Only

The Model & Make of Towel Ring Shall be as per the Approved Make List of G.S.P.H.C.L.

47 Providing & Fixing Towel Rack. Rate are inclusive of all matreials, Labour & Necessary Fittings etc. 12.00 No. 3343.63 Rs. Three Thousand Three Hundred

Complete as per Detailed Drawings, Specifications and as per the Instruction of Engineer In charge. Forty Three & Paise Sixty Three Only

The Model & Make of Towel Rack Shall be as per the Approved Make List of GSPHCL.

48 Providing and fixing Concealed center point to wall, ceiling and floor CPVC pipes SDR-13.5 PIPE 27.00 Rmt 206.73 Rs. Two Hundred Six & Paise Seventy

having national sanitation foundation (NSF) seal for potable waterof following dia nominal bore Three Only

tube fitting and Z clamps including making good the wall, ceiling and floor etc..complete. [B]

49 Providing and fixing Concealed center point to wall, ceiling and floor CPVC pipes SDR-13.5 PIPE 67.00 Rmt 251.31 Rs. Two Hundred Fifty One & Paise

having national sanitation foundation (NSF) seal for potable waterof following dia nominal bore Thirty One Only

tube fitting and Z clamps including making good the wall, ceiling and floor etc..complete. [C]

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

50 Providing and fixing Concealed center point to wall, ceiling and floor CPVC pipes SDR-13.5 PIPE 60.00 Rmt 443.29 Rs. Four Hundred Forty Three & Paise

having national sanitation foundation (NSF) seal for potable waterof following dia nominal bore Twenty Nine Only

tube fitting and Z clamps including making good the wall, ceiling and floor etc..complete. [C]

51 Providing and fixing to wall, ceiling and floor U.PVC SWR Soil Waste Pipe with 'O' Ring 75 mm dia. 63.00 Rmt 256.81 Rs. Two Hundred Fifty Six & Paise

of ISI 13592/92. Rate inclusive of All fittings like single or double 'Y' with door, reducer, coupler Eighty One Only

single 'T' with door bend, including All Labour Charges etc. complete and making good the Wall,

Ceiling and Floor, ISI make only. Joints shall be sealed by pipe sealant.

52 Providing and fixing to wall, ceiling and floor U.PVC SWR Soil Waste Pipe with 'O' Ring 110 mm 63.00 Rmt 485.22 Rs. Four Hundred Eighty Five & Paise

dia. of ISI 13592/92. Rate inclusive of All fittings like single or double 'Y' with door, reducer, coupler Twenty Two Only

single 'T' with door bend, including All Labour Charges etc. complete and making good the Wall,

Ceiling and Floor, ISI make only. Joints shall be sealed by pipe sealant.

53 Providing and fixing PVC SWR Nahni trap IS 14735 for drain -75 mm diameter with jali of the 26.00 No. 593.70 Rs. Five Hundred Ninety Three & Paise

following nominal diameter of self cleaning design with C.I scread down or hinged grating including Seventy Only

the cost cutting and making good the wall. 100mm drain.

54 Providing and fixing extruded Domal Alluminium section window having extrutded Alluminum 318.33 Smt 4985.25 Rs. Four Thousand Nine Hundred Eighty

Colour anodized section frame, horizontal Three track member size 79.9mm x 45mm x 1.20mm Five & Paise Twenty Five Only

(Section series no: 27 x 65, @ Wt. 1.12kg/mt), vertical member of size 79.9mm x 45mm x 1.20mm

(Section series no: 27 x 65, @ Wt. 1.12kg/mt) with sliding shutter of horizontal member size

65.1mm x 27mm x 1.2mm (Section @ Wt. 0.655kg/mt) vertical member of size 65.1mm x 27mm x

1.2mm (Section @ Wt. 0.655kg/mt) with 5 mm thick transparent bronze colour tinted float glass

with powder coated aluminum fittings and fixtures and transparent silicon sealant glass fixing to

frame as per details etc. complete for window including one mosquitoe jali shutter With Both Side

Locking Arrangment. (Make Jindal)

55 Providing and fixing standard extruded of ALLUMINIUM SECTION of size 63mm x 38.10mm x 9.00 Sqm 1163.92 Rs. One Thousand One Hundred Sixty

1.2mm (Jindal Section :2434,@Wt.0.643 kg per mt) with colour anodized alluminium frame for Three & Paise Ninety Two Only

ventilation with 5mm thick frosted glass as details etc complete for VENTILATION.

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

56 Providing, Supplying and Fixing of 32mm (Total) Thick Single Flush Door Shutter with 1mm Thick 216.00 Smt 8399.74 Rs. Eight Thousand Three Hundred

Laminates on Both Side of Shutter. Making / Construction of Flush Door is with Pine or southern Ninety Nine & Paise Seventy Four Only

Yellow Pine Filler and 2.5mm core veneer Both Side and 0.4mm Face Veneer on Both Side with

Lock rail on Center. Flush Door Provide with Teak wood beading patti (32mm X 12mm) on

Peripheries of Flush Door with Door Frame of Non Teak Solid Wood of size 100mm x 60mm with

Chemically Treated and Seasoned Including Paint Matching with Laminates. Frame & Flush door

shutter having 5 year warranty against attack of biological agent like termite, borers, decay, fungi

and harmful insects also warranty against seasoning related issues like crack, bending, twisting,

warping. Laminates on shutter shall be press by cold press method. Shutter shall be brought to site

in packed PVC bags & pvc coating shall be removed on completion of work in such a way that

shutter & Frame is free from nail mark & any damages etc. Rates are also Inclusive of all Labors &

Proviging 15cm. Long 8 No of Hold Fast (25mm X 5mm) & 4 No of 6 Inch S.S. but Hinges, 100mm x

75 mm x 3mm thick, required Screw & Nails per Frame and Fixing following S.S. Fixtures And

(1) Aldrops 1 No, 250mm x 16mm & Tadi 1 No, (2) Door Stopper 1 No, 100mm Long, (3) Double Leg

Heavy Push Door Stopper 1 No & (4) Handle 2 No, 150mm Long X 10mm thick. Door are Fixing as

per Details Drawing & Instruction of Engineer in charge. All Materials Used Shall be as Per

approved Material Make List of G.S.P.H.C. The Required Frame is to be Obtained from Vanil

Udhyog Maked Only.

57 Providing and fixing solid PVC Flush Door shutter 24mm thick,made from Co-extruded three layer 24.00 Smt 4514.20 Rs. Four Thousand Five Hundred

rigid PVC foam sheet(single Extruded) with density not less than 600kg/cbm outer layer (0.8- Fourteen & Paise Twenty Only

1mm)thick should be rigid PVC with density of not less than 1400kg/cbm. Door should be water

proof,Termite proof ,fire retardant&having good screw holding capacity.proviidng and fixing 100%

Solid Wood Plastic composite(WPC) Door Frame 90mmx45mm made from wood plastic

composite(single Extruded Process)material with density 780kg/cbm .all as per specifications

drawing as directed by the engineer in charge.

58 Full Glass Door on Patch Fitting Providing and fixing glass door with patch fitting door as shown in 11.00 Smt 6210.19 Rs. Six Thousand Two Hundred Ten &

the drg. Door shall consist of make 12mm thk. toughened clear float glass. Rate shall include Paise Ninteen Only

necessary designer film, approved locking systems, SS Handle pair, floor springs (Heavy duty or

equivalent), gaskets & miscellaneous hardware items. Including all materials and labour etc.

complete as per detail drawing and instruction of engineer-in charge and consultant.

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

59 Supply and Installation of Straight Glass Partition Material (12mm thick toughened glass) 33.00 Smt 6803.85 Rs. Six Thousand Eight Hundred Three

1) Full glass wall partitions will be made of 12mm toughened glass with frame-less structure. & Paise Eighty Five Only

Proper structure shall be made to ensure the fixing of glass from RCC slab above false ceiling and

2) Straight and vertical structural members shall not be visible . Glass shall be fitted on extrusion

with tool less technology and having a provision for replacing glass with perforated sheet/acoustic

tile by removing the glass.

3) NOTE: - The nature of installation should be replaceable, expandable and flexible to cater the

future expansion/technical up-gradation.

60 Gypsum False Ceiling Providing and fixing gypsum board ceiling as per 4073.00 Smt 1310.83 Rs. One Thousand Three Hundred Ten

manufactures' specifications incl. acrylic paint. Fixing of suspended gypsum plain false ceiling by & Paise Eighty Three Only

using standard company section (GYPSTEEL ULTRA), which includes providing and fixing G.I.

parameter channels of size 20 X 28 X 30 X 0.55 mm thick having one flange of 20 mm and another

flange of nylon sleeves and screws at 610 mm center. Then suspending G.I intermediate channels

of size 15 X 45 X 15mm, 0.9 mm thick fixed with two flanges of 15 mm each from the sophist at

1220 mm center with ceiling angle of width 25 mm x 10 mm x 0.55 mm thick fixed to sophist with

G.I. cleat and steel expansion fasteners. Ceiling section of 0.55 mm. thickness having knurled web

of 51 mm. and two flanges of 26 mm each with lips of 10.5 mm. area then fixed to the

channel with the help of connecting clips and in direction perpendicular to the intermediated 0.00

channel at 457 mm. center 12.5 mm tapered edge gypsum board (conforming to is 2095-1982) is

then screw fixed to ceiling section with 25 mm drywall screws at 230 mm center. Screws fixing is

done mechanically either with screwdriver or drilling machine with suitable attachment. Standard

company manufactured section (GYPSTEEL ULTRA) should be used for the entire framework. Finally

the board are to be jointed and finished, so as to have a flush look which includes filling and

finishing the tapered and square edges of the boards with jointing compound, paper tape and two

coats of primer suitable for Gyp-board (as per recommended practices of India Gyproc - Saint

Gobain make). (also including application of primer and preparing surface even & sand papered

smooth with lapi, astar...) Including three coats with plastic emulsion paint of approved brand &

manufacture. Including all materials and labour etc. complete as per det(Make: DVDO C4 /

Panasonic / Sony & Model Approve

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

61 Table (3200x1200x760mm) Providing and fixing 50 mm (18mm + 18 mm + 6 mm) thick table top 1.00 No. 902405.00 Rs. Hundred Two Thousand Four

made of 18 mm thick IS 303 MR grade commercial plywood with 75 x 75mm designer moulding Hundred Five Only

teakwood patta at border of the top with external side fixed with 4mm thick Veneer finished with

PU polish in approved shade with necessary arrangement for cable/wire manager of 75 mm dia.

and telescopic suspended metal keyboard with mouse tray on the table top. The Front Panel/Patta

shall be made of 12 mm thk. MDF with tapestry finish as per design. Panel height shall be as per

drawings, rest of the front MDF panel shall be finished with 4mm thick Veneer finished with PU

polish finish. The panel shall be so arranged that it will be placed at a distance of 75 mm from table

top, bottom & side. The panel shall be per direction of Engineer-in-charge. The Legs shall be 50 mm

thick (18 mm + 18 mm + 6mm) IS 303 MR grade commercial plywood with both sides finished with

4mm thick Veneer finished with PU polish finish. The contractor shall mof all Labors & Proviging

15cm. Long 8 No of Hold Fast (25mm X 5mm) & 4 No of 6 Inch S.S. but Hinges, 100mm x 75 mm x

3mm thick, required Screw & Nails per Frame and Fixing following S.S. Fixtures And Fastening.

(1) Aldrops 1 No, 250mm x

Side table (Size-1.20 X 0.50m) shall have Table top & legs made of 25 mm thick IS 303 MR grade 0.00

commercial plywood with outsides finished with 4mm thick Veneer finished with PU polish and

inside 0.8mm laminate finish and openable shutter made of 12 mm thick IS 303 MR grade

commercial plywood for opening shutter finished with 4mm thick Veneer finished with PU polish

finish running on HETTICH,ENOX or equivalent hinges and lock complete, SS handles including

locking arrangement for storage complete. The side table shall also have Drawer : 2 Nos made of

18 mm thick IS 303 MR grade commercial plywood on front, sides finished with 4.0 mm thick

Veneer outer & 0.8mm laminate inner sides. The rate shall be inclusive of all material, labour,

accessories etc like edge banding, lipping, Gola, mouldings.

62 Meeting Table 3.03 mtr x 1.05 mtr 1.00 No. 758712.50 Rs. Hundred Eight Thousand Seven

Providing and placing in position meeting table of size 3.03 m x 1.05 m x 0.80 m high, made from Hundred Twelve & Paise Fifty Only

imported and highly durable Sagwan wood , with tabletop and exposed surfaces finished in veneer

of approved shade and pattern, including necessary framework, edge moulding, polishing,

protective coating, and all fittings required to provide a strong, elegant and durable table complete

in all respects. The rate is inclusive of all Sagwan wood, veneer, polishing materials, hardware,

labour, tools and tackles, handling, wastage, etc. complete as directed by the Engineer-in-Charge.

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

63 Conference Table (Size-38.0x0.75x0.76m) Providing and fixing 38mm thick (plywood with veneer 20.00 Smt 71638.71 Rs. Seventy One Thousand Six Hundred

and 12 mm thick toughened extra clear with back painted NR glass top in approved shed). 12mm Thirty Eight & Paise Seventy One Only

teakwood patta for edge thickness and edges should be cover with interier & exterior side

approved 4mm veneer with 18mm thick vertical legs made by plywood with both side veneer

finish as per detail drawing. Including all materials and labour with hole for mic & popup box etc.

complete as per detail drawing and instruction of engineer in charge and consultant.

64 Cluster (Work station ) (1.37 x 0.69 x 0.76) Providing and fixing Cluster (Workstation) as per 248.00 No. 16620.40 Rs. Sixteen Thousand Six Hundred

drawing, Framing the skeleton with 19mm + 19mm thick vertical and horizontal plywood patti both Twenty & Paise Forty Only

side cover with 6mm for grooving design and finishing with selected laminate. Before installation,

make hole/face plate for conduit pipes of electrical/networking cables with openable stud from

horizontal partition. Vertical support of 19mm + 19mm thick double plywood cover with 1mm

laminate finish including teakwood bidding on exposed edges with melamine polish. Fitted 25mm

thick (plywood interior grade) post forming laminated top, fixed with metal clamps including

suspended metal keyboard-mouse tray fixed with telescoping channel, cable manager and

seperate Drawer unit box (0.65 x 0.41 x 0.43) with wooden bidding patti on nylon castors with lock

and telescopic channel of HAFELE should be made from 19mm plywood with 1mm outside and

0.8mm inside laminate as well as approved shade for Left or Right side. Providing and fixiof all

Labors & Proviging 15cm. Long 8 No of Hold Fast (25mm X 5mm) & 4 No of 6 Inch S.S. but Hinges,

100mm x 75 mm x 3mm thi

65 Table: Size: (1.83 x 0.90 x 0.76) 27.00 No. 18679.54 Rs. Eighteen Thousand Six Hundred

Provinding and fixing 19mm thick plywood top table with fixing 25mm thick plywood (19mm + Seventy Nine & Paise Fifty Four Only

6mm) patta of 300mm width fixed on bottom periphery .The plywood table top is laminated on

top and bottom.the front edges of the table top surface is to be covered with 12mm thick teak

wood bedding patty with melamine polish finish of approved shed.The Rate includes the cost of

fixiing telescopic suspended metal keyboard with mouse tray. 38mm thick vertical legs made from

plywood with exterior side 1mm and interior side 0.8mm approved laminate. Appron should be

made from plywood with laminated finish as per detail drawing and CPU Trolley should be supplied

of metal powder coated. Footrest (0.75 x 0.37) should be from teakwood with melamine polish

complete.Seperate Drawer unit box (0.65 x 0.41 x 0.43) to be made from 19mm plywood with

1mm outside and 0.8mm inside laminate as well as approved shade for Left or Right sidewith

wooden bidding patti on nylon castors with handle,lock and telescopic channel.Rate includes the

cost of all materials and labour etc. complete as per detail drawing and instruction of engineer-in

charge.The necessary hardware fitting shall be as per approved make list of GSPHCL.

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

66 Table: Size: (1.52 x 0.76 x 0.76) Providing and fixing 25mm thick (plywood interior grade) 55.00 No. 16622.62 Rs. Sixteen Thousand Six Hundred

post forming laminated top in approved shade with telescopic suspended metal keyboard with Twenty Two & Paise Sixty Two Only

mouse tray with 38mm vertical legs made by plywood with exterior side 1mm and interior side

0.8mm approved laminate. Appron should be made from plywood with laminated finish as per

detail drawing and CPU Trolley should be supplied of metal powder coated, Footrest (0.75 x 0.37)

should be from teakwood with melamine polish complete.Seperate Drawer unit box (0.65 x 0.41 x

0.43) with wooden bidding patti on nylon castors with lock and telescopic channel of HAFELE

should be made from 19mm plywood with 1mm outside and 0.8mm inside laminate as well as

approved shade for Left or Right side. Including all materials and labour etc. complete as per detail

drawing and instruction of engineer-in charge.

67 Side Table: Size: (0.91 x 0.46 x 0.69) Providing and fixing 25mm thick (plywood board, 82.00 No. 12056.21 Rs. Twelve Thousand Fifty Six & Paise

interior grade) post forming laminated top with 6mm thick plywood at backside in approved Twenty One Only

laminate shade, made out of 19mm thick plywood with exterior side 1mm and interior side 0.8mm

approved laminate, Drawer unit box (measurement shown in drawing) with wooden bidding patti,

lock and telescopic channel of HAFELE should be made from 19mm plywood with 1mm outside

and 0.8mm inside laminate as well as 19mm post forming Outside of shutter with Magnet,

Multiple drawer lock, S.S. Legs (75mm height) in bottom, Auto hinges of HAFELE. Including all

materials and labour etc. complete as per detail drawing and instruction of engineer-in charge .

(Ref. Dwg. No. )

68 High Back Chair: 5.00 No. 52526.25 Rs. Fifty Two Thousand Five Hundred

Providing and supplying Revolving synchro tilting mechanism based chair with gas lift for Twenty Six & Paise Twenty Five Only

adjustable height and medium curved back with seat and back PU moulded cushion with chromium

plated M S Pipe frame structure and white foam layer for seat and molded PU foam. White foam

layer for back covered with Lather and draped with Lather of approved shade. 5 legged revolving

molded nylon chair base with good quality of PU castors with 2 years replacement guarantee. The

chair to have wide polyurethane arm rest of approved shape. Complete chair should be in suitable

shape. Rates to be inclusive of all taxes and free delivery at site. Selection of chair should be as

approved by engineer in-charge.The chair shall be of make Wipro, Model-Absolute

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

69 Medium Back Chair: 16.00 No. 16925.13 Rs. Sixteen Thousand Nine Hundred

Providing and supplying Revolving synchro tilting mechanism based chair with gas lift for Twenty Five & Paise Thirteen Only

adjustable height and medium curved back with seat and back PU moulded cushion with chromium

plated M S Pipe frame structure and white foam layer for seat and molded PU foam. White foam

layer for back covered with Lather and draped with Lather of approved shade. 5 legged revolving

molded nylon chair base with good quality of PU castors with 2 years replacement guarantee. The

chair to have wide polyurethane arm rest of approved shape. Complete chair should be in suitable

shape. Rates to be inclusive of all taxes and free delivery at site. Selection of chair should be as

approved by engineer in-charge.The chair shall be of make: Wipro, Model:Absolute

70 Providing and supplying High back leatherette / black mesh fabric chair as per approved brand and 10.00 No. 12482.10 Rs. Twelve Thousand Four Hundred

model. (Brand and model as per HOF-Model-Marco 1001 / Godrej-Model-THRILL HIGH BACK / Eighty Two & Paise Ten Only

Wipro-Model-Define / Featherlite-Model-Halix HB / Merrifare-Model-Wau HB)

71 Providing and supplying Medium back chair for Staff as per approved brand and model. (Brand and 122.00 No. 10465.00 Rs. Ten Thousand Four Hundred Sixty

model as per HOF-Model-Cati / Godrej-Model-Pulse / Wipro-Model-That's It / Featherlite-Model- Five Only

Amaze Project / Merrifare-Model-Nez or Equivalent)

72 Providing and supplying Medium back chair for Staff Visitor as per approved brand and model. 61.00 No. 8222.50 Rs. Eight Thousand Two Hundred

(Brand and model as per HOF-Model-Sitra-L-Fix / Godrej-Model-Oxbo Visitor / Wipro-Model- Twenty Two & Paise Fifty Only

Carbon / Featherlite-Model-Astro Visitor / Merrifare-Model-Nez (Fix) or Equivalent)

73 Pro. & Supply. SS based Cafe Chair with gas lift for adjustable height & medium curved back with 3.00 No. 2000.00 Rs. Two Thousand Only

seat & back PU molded cushion with MS pipe frame structure and white foam layer for seat

....do.... as app. by engineer in-charge. (Chair shall be as per Godrej/Wipro-model

Munch/Featherlite-model Leaf)

74 Three Seater Sofa Providing and supplying the sofa will be total prepared in metal structure. So, 34.00 No. 26231.05 Rs. Twenty Six Thousand Two Hundred

50mm x 50mm sq. metal furniture pipe section created necessity support for 3 seaters sofa. Seat Thirty One & Paise Five Only

support also been in same metal section. In the metal section, the finished seating must be

0.78mm length x 0.53mm width. 3 Seater also created. then Z-Section spring use and on top 4''.0'

rubber cushion and top 25mm thick and 32 density U-Foam finished with leather rexin as per

selected sample. At back support also 0.53mm width x 0.74 mm for 3 seater back, fitted with 2''.0'

rubber cushion with 25mm U-Foam with 32 density appropriate 3'' angle support, also done

finishing along with leather finished. To adding the decorative part 12mm dia. S.S. chrome pipe

finish with legs and handle support also as shown in drawing to create decoration and

strengthening support. Including all materials and labour etc. complete as per detail drawing and

instruction of engineer-in charge.

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

75 Two Seater Sofa Providing and supplying the sofa will be total prepared in metal structure. So, 14.00 No. 17802.66 Rs. Seventeen Thousand Eight Hundred

50mm x 50mm sq. metal furniture pipe section created necessity support for 2 seaters sofa. Seat Two & Paise Sixty Six Only

support also been in same metal section. In the metal section, the finished seating must be

0.78mm length x 0.53mm width. 2 Seater also created. then Z-Section spring use and on top 4''.0'

rubber cushion and top 25mm thick and 32 density U-Foam finished with leather rexin as per

selected sample. At back support also 0.53mm width x 0.74 mm for 2 seater back, fitted with 2''.0'

rubber cushion with 25mm U-Foam with 32 density appropriate 3'' angle support, also done

finishing along with leather finished. To adding the decorative part 12mm dia. S.S. chrome pipe

finish with legs and handle support also as shown in drawing to create decoration and

strengthening support. Including all materials and labour etc. complete as per detail drawing and

instruction of engineer-in charge.

76 Single Seater Sofa Providing and supplying the sofa will be total prepared in metal structure. So, 1.00 No. 9798.82 Rs. Nine Thousand Seven Hundred

50mm x 50mm sq. metal furniture pipe section created necessity support for 3 seaters sofa. Seat Ninety Eight & Paise Eighty Two Only

support also been in same metal section. In the metal section, the finished seating must be

0.78mm length x 0.53mm width. 3 Seater also created. then Z-Section spring use and on top 4''.0'

rubber cushion and top 25mm thick and 32 density U-Foam finished with leather rexin as per

selected sample. At back support also 0.53mm width x 0.74 mm for 3 seater back, fitted with 2''.0'

rubber cushion with 25mm U-Foam with 32 density appropriate 3'' angle support, also done

finishing along with leather finished. To adding the decorative part 12mm dia. S.S. chrome pipe

finish with legs and handle support also as shown in drawing to create decoration and

strengthening support. Including all materials and labour etc. complete as per detail drawing and

instruction of engineer-in charge.

77 Centre Tipoi : Size: (0.90 x 0.60 x 0.46)Providing and fixing 12mm thick designer glass top 24.00 No. 6195.03 Rs. Six Thousand One Hundred Ninety

supported with SS stud with 19mm thick plywood frame (shown in detail drawing) with 1mm Five & Paise Three Only

approved laminate finish with nylon buffers and including all materials and labour etc. complete as

per detail drawing and instruction of engineer-in charge and consultant.

78 Corner Tipoi : Size: (0.675 x 0.675 x 0.46)Providing and fixing 12mm thick designer glass top 22.00 No. 5444.68 Rs. Five Thousand Four Hundred Forty

supported with SS stud with 19mm thick plywood frame (shown in detail drawing) with 1mm Four & Paise Sixty Eight Only

approved laminate finish with nylon buffers and including all materials and labour etc. complete as

per detail drawing and instruction of engineer-in charge and consultant.

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

79 Full Ht. Storage (2.36 Height & 0.46 Depth) Providing and fixing full height storage with 25mm thick 871.00 Smt 10502.78 Rs. Ten Thousand Five Hundred Two &

(plywood board, interior grade) top and shutter 19mm made from post forming in approved shade Paise Seventy Eight Only

with vertical and horizontal surface 19mm plywood with inside 0.8mm and outside 1mm laminate

finish. All teakwood bidding should be finished by melamine polish with support of S.S. legs, lock,

handle, etc. complete. Including all materials and labour etc. complete as per detail drawing and

instruction of engineer-in charge (Ref. Dwg. No. )

80 Full Ht. Storage (Kabutar Khana) (2.36 Height & 0.46 Depth) Providing and fixing full height storage 18.00 Smt 10502.78 Rs. Ten Thousand Five Hundred Two &

with 25mm thick (plywood board, interior grade) top and shutter 19mm made from post forming Paise Seventy Eight Only

in approved shade with vertical and horizontal surface 19mm plywood with inside 0.8mm and

outside 1mm laminate finish. All teakwood bidding should be finished by melamine polish with

support of S.S. legs, lock, handle, etc. complete. Including all materials and labour etc. complete as

per detail drawing and instruction of engineer-in charge (Ref. Dwg. No. )

81 90.00 Smt 9470.04 Rs. Nine Thousand Four Hundred

Low Ht. Storage (0.46 Depth)

Seventy & Paise Four Only

Providing and fixing low height storage with 25mm thick plywood board.Top and shutter made

from 19mm thick plywood in approved shade with vertical and horizontal surface 19mm plywood

with inside 0.8mm and outside 1mm laminate finish with 6mm thick Plywood & 0.8mm Laminated

Finished at Backside. All teakwood bidding should be finished by melamine polish with support of

S.S. legs, lock, handle, etc. complete. Including all materials and labour etc. complete as per detail

drawing and instruction of engineer-in charge.necessary hardware fitting shall be as per aprroved

make list of GSPHCL.

82 35.00 No. 4885.20 Rs. Four Thousand Eight Hundred

MS Sloted Angle Rack

Eighty Five & Paise Twenty Only

Providing & Supplying M.S. Sloted Angle Rack of Size 1200 X 600 X 1950mm Height with 5 Equal

Part of Total Height of Rack etc Complete as per Instruction by Engineer in Charge & Architect.

83 Wall Paneling Wall paneling on wall for electrical conducting and net 455.00 Smt 2116.80 Rs. Two Thousand One Hundred

wiring etc. made by 19 mm and 12 mm plywood framing, 1mm approved laminate on surfaces Sixteen & Paise Eighty Only

openable facility with necessary hardware as per design and instruction as directed by site in-

charge or architect.(Ref. Dwg. No. )

84 Veneer wall Paneling Wall paneling on wall made by 18mm frame and 12mm plywood surface on 106.00 Smt 6084.41 Rs. Six Thousand Eighty Four & Paise

frame. 4mm thick approved veneer fixed on surfaces of the plywood with necessary hardware Forty One Only

required. All veneer surface should be finished by monocoat polish as per drawing and instruction

as directed by site in-charge or architect.

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

85 PVC wall panelling : 45.00 Smt 6827.13 Rs. Six Thousand Eight Hundred Twenty

Providing and fixing PVC wall panelling of approved design, shade and texture over 19 mm thick Seven & Paise Thirteen Only

plywood and backing, securely fixed with suitable hi bond bonding agent adhesive and screws

wherever required, including cutting to the required size, making grooves and joints, edge

finishing, and aligning the panels properly . The rate is inclusive of all necessary materials, labour,

tools and tackles, handling, wastage, etc. complete as directed by the Engineer-in-Charge.

86 Full Ht. Partition (Wooden) Providing and fixing full and low height partition and 891.00 Smt 3579.17 Rs. Three Thousand Five Hundred

glass partition with installation upto ceiling or beam bottom as per drawing and framing the Seventy Nine & Paise Seventeen Only

skeleton (plywood frame structure) with 19mm + 19mm thick vertical and horizontal plywood

(patti) both side cover with 6mm + 6mm for grooving as per design. Fixing properly without any air

gap and finishing with selected 1mm laminate. Before installation, make hole/face plate for

conduit pipes of electrical / networking cables with openable stud from partition Including all

materials and labour etc. complete as per detail drawing and instruction of engineer-in charge.

87 View Cutter : 3.00 Smt 22708.96 Rs. Twenty Two Thousand Seven

Providing and fixing view cutter partition with wooden patta border finished with veneer of Hundred Eight & Paise Ninety Six Only

approved shade and pattern and 8 mm thick toughened glass covered with non-reflective film of

approved quality, including necessary wooden framework, edge finishing, polishing, cutting and

fitting to the required size, and fixing in position complete . The rate is inclusive of all wood

sections, veneer, toughened glass, non-reflective film, polishing materials, fittings, labour, tools

and tackles, handling, wastage, etc. complete as directed by the Engineer-in-Charge.

88 Veneer Book rack type Storage Providing and fixing veneer book rack type storage with 19mm 1.00 No. 20228.26 Rs. Twenty Thousand Two Hundred

thick plywood used for top, side, bottom and shutter having 12mm thick plywood back. 4mm thick Twenty Eight & Paise Twenty Six Only

approved veneer fixed with vertical and horizontal surface of exposed edge of plywood surface and

inside 0.8mm thick laminate used. All veneer surface should be finished by monocoat polish with

support of S.S. legs, lock, handle, etc. complete. Including all materials and labour etc. complete as

per detail drawing and instruction of engineer-in charge.

89 Pro. & Fix. Discussion Table with 12mm thick & 900mm dia. Glass on Top having Back PU Painted as 1.00 No. 8460.50 Rs. Eight Thousand Four Hundred Sixty

per Direction of Architect. The Base of the Table will be made by 1"Dia SS-304 Pipes fixed with SS- & Paise Fifty Only

304 Ring as per Direction and Design.

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

90 Single Bed with Matress 1.00 No. 11666.01 Rs. Eleven Thousand Six Hundred Sixty

Providing and supplying Single Bed (0.90 X 2.0m) made from teakwood 75x75mm leg support with Six & Paise One Only

50x38mm member as per design with 18mm thick plywood with 1.0mm laminate finish on top and

0.8mm thick laminate finish on bottom area on wooden frame and 18mm thick 150mm wide

plywood patta on three side finished with both side 1.0mm laminate and back side having 330mm

wide plywood patta finished with both side 1.0mm laminate and 2mm thick pvc edge banding of all

expose sided and legs & frame to be melamine polish etc. complete. Including supplying 100mm

thick matress of U form, density 50Kg/m2 with soft seat on top of matress etc. complete as per

instruction of engineer in charge. (Bed with matress)

91 Roller blind : 22.00 Smt 8043.10 Rs. Eight Thousand Forty Three & Paise

Providing and fixing premium quality roller blinds of approved TBF make, model- Richmond (75% Ten Only

blackout, made out of 70% Pvc, 30% polyester) with drive unit,end plug, support brackets, Roller

tubes, bottom rail, ball chains etc. Drive unite to be of mauled plastic with straight rectangular

support pin and inserted into the tube end. it shall be driven by a ball chain pully. End plug shall be

moulded plastic locking pin. The plug shall be inserted into the Tube end. Support bracket shall be

of zinc plated steel and provided with moulded plastic covers and used in right or left hand

position, differentiated by acceptance of the rectangular drive unit support or the round idler plug

in.Roller Tube shall be made out of role formed Steel of thick. Suitably protected against corrosion

and Keyway integral with the Tube to accommodate the spline. bottom reel shall be a stiffening

element inserted into the bottom Road pocket.

92 Providing and supplying bench (Three Seater) for visitors made of following backrest and seat 20.00 No. 20113.50 Rs. Twenty Thousand One Hundred

made of PU with MS structure with powder coating finished as per approved brand and model. Thirteen & Paise Fifty Only

(Brand and model as per HOF-Model-VIT-3004 PU / Godrej-Model-Luft 3 Seater 4 Arm / Wipro-

Model-Metalica Classico PU / Featherlite-Model-SJ-820A Tandem / Merrifare-Model-Varion Beam

Seating (G01*B3a00J) or Equivalent)

93 Roller Blind Providing and fixing Roller Blind curtain fixed on window level on wooden batten and 223.00 Smt 2474.80 Rs. Two Thousand Four Hundred

curtain lift with cotton thin rope, design and colour as per instruction by engineer – in – Charge Seventy Four & Paise Eighty Only

with necessary hardware fitting, material and labour etc complete.

94 S.S. Sinage Board (Name Plate) Providing and fixing S.S. signage board made from Stainless steel 95.00 No. 1265.00 Rs. One Thousand Two Hundred Sixty

sheet and fixed on wall with screw and mirror cap as per Instruction of designer and Engineer-In- Five Only

Charge. Size (12" X 4.5")

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

95 Finishing Ceiling / Slope Surfaces with Plastic Emulsion Paint on Ceiling / Slope Surfaces (Two 2054.00 Smt 193.29 Rs. One Hundred Ninety Three & Paise

Coats) to give an Required shape and even shade after thoroughly brushing the surface to remove Twenty Nine Only

all dirt, and remains of loose powdered materials and finishing smooth etc. complete. Rate are

inclussive of Applying Two Coats of Lappy (Putty) and One Coat of Primer on New Wall Surfaces to

give an even shade including throughly brushing the surface free from mortar droppings and other

foreign matter and sand papered smooth. (Fine Putty Shall be of Bison Wall Putty of Berger Paint

India Ltd or Trucare Wall Putty of Asian Paint or Dulux Polly Putty of Dulux Paint Only and Primer

shall be of BP White Primer of Berger Paint India Ltd or Asian Paint Trucare Interior Primer of Asian

Paint or Interior Sealer A 500 of Dulux Paint Only and Plastic Emulsion Paint Shall be of Rangoli

Total Care of Berger Paint India Ltd or Apcolite Premium Emulsion of Asian Paint or Dulux Interior A

900 of Dulux Paint Only.) etc. Complete for ALL FLOORS.

96 Finishing Wall with Plastic Emulsion Paint on Wall Surface (two coats) to give an required shap 7503.00 Smt 180.25 Rs. One Hundred Eighty & Paise Twenty

even shade after throughly brushing the surface to remove all dirt and remains of loose poweder Five Only

material etc. complete. Rate are inclusive of applying two coat of lapy (Putty) and one coat of

primer on new wall surface to give and even shade including thoroughly brushing the surface free

from mortar dropping and other foreign matter and sand papered smooth. Fine Putty Shall be

Bison Wall Putty of Berger Paint India Ltd or Trucare Wall Putty of Asian Paint or Dulux Polly Putty

of Dulux Paint Only & Primer shall be BP White Primer of Berger Paint India Ltd or Asian Paint

Trucare Interior Primer of Asian Paint or Interior Sealer A 500 of Dulux Paint only and Plastic

Emulsion paint Shall be Rangoli Total Care of Berger Paint India Ltd or Apcolite Premium Emulsion

of Asian Paint or Dulux Interior A 900 of Dulux Paint only.

97 Provinding 10mm thick WATER PROOF cement plaster in single coat on fair side brick work or 77.00 Smt 191.90 Rs. One Hundred Ninety One & Paise

concrete wall for interior plasering upto floor to level and finishing even smooth in cemente Ninety Only

mortar 1:3 (1 cement :3 sand) finished with floting coat of neat cemente slurry incl. provinding and

mixing water proofing materials in proportion recommended by the manufacturersfor All Floors.

98 Providing and Laying Acrylic base (Zycosil or equivalent) Water Proofing paint treatment treatment 77.00 Smt 110.70 Rs. One Hundred Ten & Paise Seventy

in two coats of vertical and horizontal surface of depressed portion of Bath/W.C. as directed by Only

engineer in charge.This treatment shall be carried out over & above water proofing plaster.

99 Provinding CEMENT VATA (10cm x 10cm) size quarter round in cement mortar (1 : 1) including neat 102.00 Smt 24.04 Rs. Twenty Four & Paise Four Only

cement finishing, watering etc. Complete.

100 Suppllying and Filling Cinder in Sunk Portions for All Lead and Lift etc. Complete. For all floor. 16.00 Cmt 791.68 Rs. Seven Hundred Ninety One & Paise

Sixty Eight Only

101 Providing & laying cement flooring 1:2:4(1 cement:2coarse sand :4 stone aggregate 20mm. 63.00 Smt 365.48 Rs. Three Hundred Sixty Five & Paise

Nominal size)laid in one layer finished with a floating coat of neat cement (B) 50 mm. thick Forty Eight Only

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

102 Provinding and fixing gun metal check or non return full way WHEEL / HANDLE VALVE 25 mm dia. 7.00 No. 416.47 Rs. Four Hundred Sixteen & Paise Forty

103 Providing and applying micro concrete in existing RCC members. Micro concrete shall be of Perma 184.00 Smt 3109.44 Rs. Three Thousand One Hundred Nine

recrete-306 or its equivalent from ROFF, FOSROCK, BASF or SIKKA as approved by engineer in & Paise Forty Four Only

charge (OF 60MPA at 28days). Rate aera inclusive of cleaning the surface, remove loose particles.

104 Veneer Ceiling: 38.00 Smt 9772.44 Rs. Nine Thousand Seven Hundred

Providing and fixing ceiling finished with approved Veneer royal look finish polish over plywood Seventy Two & Paise Forty Four Only

backing, including preparation of the base framework, cutting to required sizes, edge finishing,

polishing and all fittings and accessories needed to complete the work neatly and in proper

alignment. The rate are inclusive with all materials, labour, tools, scaffolding etc. to completion the

work as directed by the Engineer-in-Charge.

105 Veneer finish Flush door 7.00 Smt 28243.80 Rs. Twenty Eight Thousand Two

Providing, Supplying and Fixing of 32mm (Total) Thick Flush Door Shutter with both side 4mm Thick Hundred Forty Three & Paise Eighty

Veneer Shutter. Making / Construction of Flush Door is with Pine or southern Yellow Pine Filler and Only

Veneer on one Side and one side pvc pannel with Lock rail on Center. Flush Door Provide with Teak

wood beading patti (40mm X 10mm) on Peripheries of Flush Door. Flush door shutter having 5 year

warranty against attack of biological agent like termite, borers, decay, fungi and harmful insects

also warranty against seasoning related issues like crack, bending, twisting, warping. Veneer on

shutter shall be press by cold press method. Shutter shall be brought to site in packed PVC bags &

pvc coating shall be removed on completion of work in such a way that shutter is free from nail

mark & any damages etc.

Rates are also Inclusive of all Labors & Providing 3 No of 6 Inch S.S. but Hinges, required Screw &

Nails per Frame and Fixing following S.S. Fixtures and Fastening.

(1) Door lock with key hole , (2) Door Stopper 1 No. 4 inch , (3) Double Leg Heavy Push Door

Stopper 1 No & (4) Door Handle 2 No,(5) Door are Fixing as per Details Drawing or Instruction of

Engineer in charge.

Rate is inclusive with all necessary material , labour etc complete as diected byEngineer-in-charge.

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

106 Veneer & PVC finish Flush door 3.00 Smt 21839.01 Rs. Twenty One Thousand Eight

Providing, Supplying and Fixing of 32mm (Total) Thick Flush Door Shutter with one side 4mm Thick Hundred Thirty Nine & Paise One Only

Veneer and other side pvc panel of Shutter. Making / Construction of Flush Door is with Pine or

southern Yellow Pine Filler and Veneer on one Side and one side pvc pannel with Lock rail on

Center. Flush Door Provide with Teak wood beading patti (40mm X 10mm) on Peripheries of Flush

Door. Flush door shutter having 5 year warranty against attack of biological agent like termite,

borers, decay, fungi and harmful insects also warranty against seasoning related issues like crack,

bending, twisting, warping. Veneer on shutter shall be press by cold press method. Shutter shall be

brought to site in packed PVC bags & pvc coating shall be removed on completion of work in such a

way that shutter is free from nail mark & any damages etc.

Rates are also Inclusive of all Labors & Providing 3 No of 6 Inch S.S. but Hinges, required Screw &

Nails per Frame and Fixing following S.S. Fixtures and Fastening.

(1) Door lock with key hole , (2) Door Stopper 1 No. 4 inch , (3) Double Leg Heavy Push Door

Stopper 1 No & (4) Door Handle 2 No,(5) Door are Fixing as per Details Drawing or Instruction of

Engineer in charge.

Rate is inclusive with all necessary material , labour etc complete as diected byEngineer-in-charge.

107 Wooden Flooring: 66.00 Smt 9280.50 Rs. Nine Thousand Two Hundred Eighty

Providing and fixing 8.3mm laminated wooden flooring as approved make- Rio Grande made by & Paise Fifty Only

marcopolo laminated wooden flooring over the existing surface.It should be made of HDF AC4

board 1215*195*8.3MM planks with SQUARE EDGE, CTN SMALL EMBOSSMENT, WHITE CORE ARC

CLICK LOCK SYSTEM with GERMAN TECHNOLOGY. wich is Resist against Fade, Stains on floor,

Scretches, Cigaratte burn etc. Using suitable underlay 2mm thick foam sheet , including cutting the

boards to the required size, laying them in proper alignment, and finishing the edges with

matching skirting or beading so as to give a neat and uniform appearance. The rate are inclusive

with all materials, labour, tools and tackles, handling, wastage etc. to complete the work as

directed by the Engineer-in-Charge.

108 Wooden Skirting: 4.00 Rmt 1320.20 Rs. One Thousand Three Hundred

Providing and fixing 12 mm thick & Ht. 60mm wooden skirting of required height and shade to Twenty & Paise Twenty Only

match the wooden flooring, fixed to the wall with suitable adhesive and screws wherever required,

including cutting, edge finishing, jointing at corners, and making all connections neat and true to

line and level. The rate is inclusive of all materials, accessories, labour, tools and tackles, handling,

wastage, etc. complete as directed by the Engineer-in-Charge.

109 Texture Paint (Two Coats) with Two Tone Texture Paint of App. Brand & Manufacture on 15.00 Smt 1243.00 Rs. One Thousand Two Hundred Forty

Underrated Wall Surface to given an even shade incl. ….do…. Etc. Complete. Three Only

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

110 Decorative Premium Wall Paper : 8.00 Smt 2415.00 Rs. Two Thousand Four Hundred

Providing and fixing self-adhesive decorative premium wallpaper of approved design, shade and Fifteen Only

texture, having water-resistant, dust-proof and matt finish coated surface, including aligning the

pattern, removing air bubbles, trimming at edges and corners, and finishing the surface neatly. The

rate is inclusive of all materials, labour, tools and tackles, handling, wastage, etc. complete as

directed by the Engineer-in-Charge.

111 8mm Glass : 4.00 Smt 9763.09 Rs. Nine Thousand Seven Hundred Sixty

Providing and fixing 8 mm thick extra clear back painted toughened glass , fixed in position with Three & Paise Nine Only

suitable adhesive, with required fixing arrangement, including machine-polished edges, making

necessary cut-outs for electrical points wherever required. The rate are inclusive with all materials,

fittings, labour, tools and tackles, handling, wastage etc to complete the work as directed by the

Engineer-in-Charge.

112 Pro., Supply & Fix. SS 304 Grade Board of "GUJARAT POLICE" on MS Framing Having Size of Logo 1.00 No. 223905.00 Rs. Hundred Three Thousand Nine

1.06mt. X 1.22mt. Incl. LED Lighting Arrangement Inside the Logo of "GUJARAT POLICE" etc. Hundred Five Only

Complete as Directed by Architect/Engineer in Charge.

113 OPTIMIZER PLUS 0.00

1.00 No. 115301.90 Rs. Hundred Five Thousand Three

Hundred One & Paise Ninety Only

Overall Dimensions of SD 3 Single Drive Cover Unit 3 Bay(U/C + Fittings + Cover) shall be 0.00

3600mm(W)x400mm(D)x2121.5mm(H). The Construction shall be rigid knock down made out of

0.8 thick CRCA steel conforming to IS : 513 . Each body shall have a main unit plus add on units

(1,2,3,4) . Finish shall be Epoxy polyester powder coated thickness of 40 microns . Shelf

construction shall be made from CRCA steel 0.8 mm thick IS :513 .Uniformly distributed load

capacity of 100 Kg . Undercarriage shall have construction in welded frame made of HR sheet 3 mm

thick conforming to IS : 2062. The Movements shall be Drive Type configuration : In case of D2,D3

& D4 movement of units is achieved mechanically through a PU Drive Wheel and Sprocket -Chain-

Tensioner arrangement mounted rigidly onto body size. For D3 each movable undercarriage shall

be provided with 3 rollers on the shaft for driving ,3 antifriction ball bearing for rolling.LD

understructure has 2 nos. of anti-tilt bearing assembly.The roller assembly comprises of a die-cast

step wheel, 2 deep-groove ball bearings and a MS shaft. The step wheel is made of cast steel and is

fitted onto the MS shaft using a feather key.

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

The two ball bearings are then fastened on either side of the step wheel using circlips. This entire 0.00

roller assembly is then snap-fitted into a wheel housing. The wheel housing is fixed in the U

channel of the understructure using machine screws. This wheel-housing is made of engineering

plastic material made by injection-molding process. The entire roller assembly is designed to

withstand the maximum loads of the body. Fittings shall be centralized locking arrangement

through locking stiffener mounted onto back of single last unit so that it gets locked on channels

when all the units are brought together. The Recess handle lock is of Godrej make & placed at

suitable height .The ‘sprocket-chain’ arrangement is covered by a 1 mm thk. CRCA sheet Drive Unit

Cover with dimensions 1202mm x 398mm x 87mm and is fixed onto the side of the body. The PU

handwheel is rigidly fixed at suitable height on side of the body & projects out of cover by another

99.0 mm. Fixed unit (SD) does not have the Drive Unit Cover. When the last unit is twin movable,

hinged doors as accessories are provided for the end bodies, so in this case locking stiffener is

mounted onto drive unit

cover; and with tile fascia option, it will be mounted in the recess of vertical trim. Each Drive Type 0.00

units shall have Locking Knob near the drive wheel for manual locking of individual units when a

person is using those units. Knob shall be rotated to unlock position when units are to be moved.

End stoppers shall be provided to prevent derailment.The nuts & bolts are galvanized / blackodized

/ Zn Plated. Also total no. of loading levels per understructure shall be 15 for SD3. Label holder - It

is an aluminium extrusion of length 396mm for LD/SD and 796mm for TD, fitted on to front cover

of body. The Paper is 300GSM matt milky white sticker paper, to be inserted into the aluminium

extrusion. The length of paper is 394mm for LD/SD and 794mm for TD. Over that a transparent

plastic of corresponding length of 150-200 micron polythene is to be inserted.

114 1.00 No. 180939.25 Rs. Hundred Thousand Nine Hundred

Optz Plus LD3 Thirty Nine & Paise Twenty Five Only

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

Overall Dimensions of LD3 Single last Drive Unit 3 Bay(U/C + Fittings + Cover) shall be 0.00

3600mm(W)x400mm(D)x2121.5mm(H). The Construction shall be rigid knock down made out of

0.8 thick CRCA steel conforming to IS : 513 . Each body shall have a main unit plus add on units

(1,2,3,4) . Finish shall be Epoxy polyester powder coated thickness of 40 microns . Shelf

construction shall be made from CRCA steel 0.8 mm thick IS :513 .Uniformly distributed load

capacity of 100 Kg . Undercarriage shall have construction in welded frame made of HR sheet 3 mm

thick conforming to IS : 2062. The Movements shall be Drive Type configuration : In case of D2,D3

& D4 movement of units is achieved mechanically through a PU Drive Wheel and Sprocket -Chain-

Tensioner arrangement mounted rigidly onto body size. For D3 each movable undercarriage shall

be provided with 3 rollers on the shaft for driving , 3 antifriction ball bearing for rolling. LD

understructure has 2 nos. of anti-tilt bearing assembly. The roller assembly comprises of a die-cast

step wheel, 2 deep-groove ball bearings and a MS shaft. The step wheel is made of cast steel and is

fitted onto the MS shaft using a feather key.

The two ball bearings are then fastened on either side of the step wheel using circlips. This entire

roller assembly is then snap-fitted into a wheel housing. The wheel housing is fixed in the U

channel of the understructure using machine screws. This wheel-housing is made of engineering

plastic material made by injection-molding process. The entire roller assembly is designed to

withstand the maximum loads of the body. Fittings shall be centralized locking arrangement

through locking stiffener mounted onto back of single last unit so that it gets locked on channels

when all the units are brought together. The Recess handle lock is of Godrej make & placed at

suitable height .The ‘sprocket-chain’ arrangement is covered by a 1 mm thk. CRCA sheet Drive Unit

Cover with dimensions 1202mm x 398mm x 87mm and is fixed onto the side of the body. The PU

handwheel is rigidly fixed at suitable height on side of the body & projects out of cover by another

99.0 mm. Fixed unit (SD) does not have the Drive Unit Cover. When the last unit is twin movable,

hinged doors as accessories are provided for the end bodies, so in this case locking stiffener is

mounted onto drive unit

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

cover; and with tile fascia option, it will be mounted in the recess of vertical trim. Each Drive Type

units shall have Locking Knob near the drive wheel for manual locking of individual units when a

person is using those units. Knob shall be rotated to unlock position when units are to be moved.

End stoppers shall be provided to prevent derailment.The nuts & bolts are galvanized / blackodized

/ Zn Plated. Also total no. of loading levels per understructure shall be 15 for LD3. Label holder - It

is an aluminium extrusion of length 396mm for LD/SD and 796mm for TD, fitted on to front cover

of body. The Paper is 300GSM matt milky white sticker paper, to be inserted into the aluminium

extrusion. The length of paper is 394mm for LD/SD and 794mm for TD. Over that a transparent

plastic of corresponding length of 150-200 micron polythene is to be inserted.

115 Optz Plus TD3 Solid back panel 6.00 No. 242422.69 Rs. Hundred Two Thousand Four

Hundred Twenty Two & Paise Sixty

Overall Dimensions of TD3 Twin Drive Unit 3 bay(U/C + Fittings + Cover) shall be

3600mm(W)x800mm(D)x2121.5mm(H). The Construction shall be rigid knock down made out of

0.8 thick CRCA steel conforming to IS : 513 . Each body shall have a main unit plus add on units

(1,2,3,4) . Finish shall be Epoxy polyester powder coated thickness of 40 microns . Shelf

construction shall be made from CRCA steel 0.8 mm thick IS :513 .Uniformly distributed load

capacity of 100 Kg . Undercarriage shall have construction in welded frame made of HR sheet 3 mm

thick conforming to IS : 3062. The Movements shall be Drive Type configuration : In case of D2,D3

& D4 movement of units is achieved mechanically through a PU Drive Wheel and Sprocket -Chain-

Tensioner arrangement mounted rigidly onto body size. For D3 each movable undercarriage shall

be provided with 3 rollers on the shaft for driving ,3 antifriction ball bearing for rolling. The roller

assembly comprises of a die-cast step wheel, 2 deep-groove ball bearings and a MS shaft. The step

wheel is made of cast steel and is fitted onto the MS shaft using a feather key.

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

The two ball bearings are then fastened on either side of the step wheel using circlips. This entire

roller assembly is then snap-fitted into a wheel housing. The wheel housing is fixed in the U

channel of the understructure using machine screws. This wheel-housing is made of engineering

plastic material made by injection-molding process. The entire roller assembly is designed to

withstand the maximum loads of the body. Fittings shall be centralized locking arrangement

through locking stiffener mounted onto back of single last unit so that it gets locked on channels

when all the units are brought together. The Recess handle lock is of Godrej make & placed at

suitable height .The ‘sprocket-chain’ arrangement is covered by a 1 mm thk. CRCA sheet Drive Unit

Cover with dimensions 1302mm x 398mm x 87mm and is fixed onto the side of the body. The PU

handwheel is rigidly fixed at suitable height on side of the body & projects out of cover by another

99.0 mm. Fixed unit (SD) does not have the Drive Unit Cover. When the last unit is twin movable,

hinged doors as accessories are provided for the end bodies, so in this case locking stiffener is

mounted onto drive unit

cover; and with tile fascia option, it will be mounted in the recess of vertical trim. Each Drive Type

units shall have Locking Knob near the drive wheel for manual locking of individual units when a

person is using those units. Knob shall be rotated to unlock position when units are to be moved.

End stoppers shall be provided to prevent derailment.The nuts & bolts are galvanized / blackodized

/ Zn Plated. Also total no. of loading levels per understructure shall be 30 for TD3. Label holder - It

is an aluminium extrusion of length 396mm for LD/SD and 796mm for TD, fitted on to front cover

of body. The Paper is 300GSM matt milky white sticker paper, to be inserted into the aluminium

extrusion. The length of paper is 394mm for LD/SD and 794mm for TD. Over that a transparent

plastic of corresponding length of 150-300 micron polythene is to be inserted.TD units are

designed with tie rod assembly options as well. it acts as a substitute to the back panels (only in

twin body) if the customer chooses to not have back panels. The assembly consists of 2 tie rods,

fixing brackets and 2 turnbuckles.

The tie rods are fixed in a shape of ‘X’ between two opposite shelves. The tie rods are made of

4mm diameter rods of MS while the fixing brackets are made of 2mm thk. CRCA Steel conforming

to IS: 513 Gr.D. This assembly is available for both heights – 1980H and 2361H.

CHANNELS (RAILS)

116 Optz Plus D3 CHNL 2400mm 4.00 No. 40515.51 Rs. Forty Thousand Five Hundred

Fifteen & Paise Fifty One Only

It consists of ‘C’ section 2 mm thk HR sheet & Square 25.4mm X 2mm thk ERW tube – both

connected by screws. Prior to the grouting of the guide channels with the help of raul plug &

screw, ensure the ground is level. The rail channels are of 3 lengths i.e., 800mm, 1600mm and

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

117 Optz Plus D3 CHNL 800mm 4.00 No. 18192.38 Rs. Eighteen Thousand One Hundred

Ninety Two & Paise Thirty Eight Only

It consists of ‘C’ section 2 mm thk HR sheet & Square 25.4mm X 2mm thk ERW tube – both

connected by screws. Prior to the grouting of the guide channels with the help of raul plug &

screw, ensure the ground is level. The rail channels are of 3 lengths i.e., 800mm, 1600mm and

118 OPTIMIZER PLUS

Optz Plus SD2 3.00 No. 77596.69 Rs. Seventy Seven Thousand Five

Hundred Ninety Six & Paise Sixty Nine

Overall Dimensions of SD - 2 Single Drive Cover Unit 2 Bay(U/C + Fittings + Cover) shall be

2400mm(W)x400mm(D)x2121.5mm(H). The Construction shall be rigid knock down made out of

0.8 thick CRCA steel conforming to IS : 513 . Each body shall have a main unit plus add on units

(1,2,3,4) . Finish shall be Epoxy polyester powder coated thickness of 40 microns . Shelf

construction shall be made from CRCA steel 0.8 mm thick IS :513 .Uniformly distributed load

capacity of 100 Kg . Undercarriage shall have construction in welded frame made of HR sheet 3 mm

thick conforming to IS : 2062. The Movements shall be Drive Type configuration : In case of D2,D3

& D4 movement of units is achieved mechanically through a PU Drive Wheel and Sprocket -Chain-

Tensioner arrangement mounted rigidly onto body size. For D2 each movable undercarriage shall

be provided with 2 rollers on the shaft for driving , 2 antifriction ball bearing for rolling.The roller

assembly comprises of a die-cast step wheel, 2 deep-groove ball bearings and a MS shaft. The step

wheel is made of cast steel and is fitted onto the MS shaft using a feather key. The two ball

bearings are then fastened on either side of the step wheel using circlips. This entire roller

assembly is then snap-fi ed into a wheel housing. The wheel housing is fixed in the U channel of

the understructure using machine screws. This wheel-housing is made of engineering plastic

material made by injection-molding process. The entire roller assembly is designed to withstand

the maximum loads of the body. Fittings shall be centralized locking arrangement through locking

stiffener mounted onto back of single last unit so that it gets locked on channels when all the units

are brought together. The Recess handle lock is of Godrej make & placed at suitable height .The

‘sprocket-chain’ arrangement is covered by a 1 mm thk. CRCA sheet Drive Unit Cover with

dimensions 1202mm x 398mm x 87mm and is fixed onto the side of the body. The PU handwheel is

rigidly fixed at suitable height on side of the body & projects out of cover by another 99.0 mm.

Fixed unit (SD) does not have the Drive Unit Cover. When the last unit is twin movable, hinged

doors as accessories are provided for the end bodies, so in this case locking stiffener is mounted

onto drive unit cover; and with tile fascia option, it will be mounted in the recess of vertical trim.

Each Drive Type units shall have Locking Knob near the drive wheel for manual locking of individual

units when a person is using those units. Knob shall be rotated to unlock position when units are to

be moved. End stoppers shall be provided to prevent derailment.The nuts & bolts are galvanized /

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

Also total no. of loading levels per understructure shall be 10 for SD2. Label holder - It is an

aluminium extrusion of length 396mm for LD/SD and 796mm for TD, fitted on to front cover of

body. The Paper is 300GSM matt milky white sticker paper, to be inserted into the aluminium

extrusion. The length of paper is 394mm for LD/SD and 794mm for TD. Over that a transparent

plastic of corresponding length of 150-200 micron polythene is to be inserted.

119 Optz Plus LD2 3.00 No. 133957.59 Rs. Hundred Three Thousand Nine

Hundred Fifty Seven & Paise Fifty Nine

Overall Dimensions of LD - 2 Single last Drive Unit 2 Bay(U/C + Fittings + Cover) shall be

2400mm(W)x400mm(D)x2121.5mm(H). The Construction shall be rigid knock down made out of

0.8 thick CRCA steel conforming to IS : 513 . Each body shall have a main unit plus add on units

(1,2,3,4) . Finish shall be Epoxy polyester powder coated thickness of 40 microns . Shelf

construction shall be made from CRCA steel 0.8 mm thick IS :513 .Uniformly distributed load

capacity of 100 Kg . Undercarriage shall have construction in welded frame made of HR sheet 3 mm

thick conforming to IS : 2062. The Movements shall be Drive Type configuration : In case of D2,D3

& D4 movement of units is achieved mechanically through a PU Drive Wheel and Sprocket -Chain-

Tensioner arrangement mounted rigidly onto body size. For D2 each movable undercarriage shall

be provided with 2 rollers on the shaft for driving , 2 antifriction ball bearing for rolling. LD

understructure has 2 nos. of anti-tilt bearing assembly. The roller assembly comprises of a die-cast

step wheel, 2 deep-groove ball bearings and a MS shaft. The step wheel is made of cast steel and is

fitted onto the MS shaft using a feather key. The two ball bearings are then fastened on either side

of the step wheel using circlips. This entire roller assembly is then snap-fitted into a wheel housing.

The wheel housing is fixed in the U channel of the understructure using machine screws. This

wheel-housing is made of engineering plastic material made by injection-molding process. The

entire roller assembly is designed to withstand the maximum loads of the body. Fittings shall be

centralized locking arrangement through locking stiffener mounted onto back of single last unit so

that it gets locked on channels when all the units are brought together. The Recess handle lock is of

Godrej make & placed at suitable height .The ‘sprocket-chain’ arrangement is covered by a 1 mm

thk. CRCA sheet Drive Unit Cover with dimensions 1202mm x 398mm x 87mm and is fixed onto the

side of the body. The PU handwheel is rigidly fixed at suitable height on side of the body & projects

out of cover by another 99.0 mm. Fixed unit (SD) does not have the Drive Unit Cover. When the

last unit is twin movable, hinged doors as accessories are provided for the end bodies, so in this

case locking stiffener is mounted onto drive unit cover; and with tile fascia option, it will be

mounted in the recess of vertical trim. Each Drive Type units shall have Locking Knob near the drive

wheel for manual locking of individual units when a person is using those units. Knob shall be

rotated to unlock position when units are to be moved. End stoppers shall be provided to prevent

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

The nuts & bolts are galvanized / blackodized / Zn Plated. Also total no. of loading levels per

understructure shall be 10 for LD2. Label holder - It is an aluminium extrusion of length 396mm for

LD/SD and 796mm for TD, fitted on to front cover of body. The Paper is 300GSM matt milky white

sticker paper, to be inserted into the aluminium extrusion. The length of paper is 394mm for LD/SD

and 794mm for TD. Over that a transparent plastic of corresponding length of 150-200 micron

polythene is to be inserted.

120 Optz Plus TD2 Solid back panel 15.00 No. 170487.14 Rs. Hundred Thousand Four Hundred

Eighty Seven & Paise Fourteen Only

Overall Dimensions of TD - 2 Twin Drive Unit 2 Bay(U/C + Fittings + Cover) shall be

2400mm(W)x800mm(D)x2121.5mm(H). The Construction shall be rigid knock down made out of

0.8 thick CRCA steel conforming to IS : 513 . Each body shall have a main unit plus add on units

(1,2,3,4) . Finish shall be Epoxy polyester powder coated thickness of 40 microns . Shelf

construction shall be made from CRCA steel 0.8 mm thick IS :513 .Uniformly distributed load

capacity of 100 Kg . Undercarriage shall have construction in welded frame made of HR sheet 3 mm

thick conforming to IS : 2062. The Movements shall be Drive Type configuration : In case of D2,D3

& D4 movement of units is achieved mechanically through a PU Drive Wheel and Sprocket -Chain-

Tensioner arrangement mounted rigidly onto body size. For D2 each movable undercarriage shall

be provided with 2 rollers on the shaft for driving , 2 antifriction ball bearing for rolling.The roller

assembly comprises of a die-cast step wheel, 2 deep-groove ball bearings and a MS shaft. The step

wheel is made of cast steel and is fitted onto the MS shaft using a feather key. The two ball

bearings are then fastened on either side of the step wheel using circlips. This entire roller

assembly is then snap-fi ed into a wheel housing. The wheel housing is fixed in the U channel of

the understructure using machine screws. This wheel-housing is made of engineering plastic

material made by injection-molding process. The entire roller assembly is designed to withstand

the maximum loads of the body. Fittings shall be centralized locking arrangement through locking

stiffener mounted onto back of single last unit so that it gets locked on channels when all the units

are brought together. The Recess handle lock is of Godrej make & placed at suitable height .The

‘sprocket-chain’ arrangement is covered by a 1 mm thk. CRCA sheet Drive Unit Cover with

dimensions 1202mm x 398mm x 87mm and is fixed onto the side of the body. The PU handwheel is

rigidly fixed at suitable height on side of the body & projects out of cover by another 99.0 mm.

Fixed unit (SD) does not have the Drive Unit Cover. When the last unit is twin movable, hinged

doors as accessories are provided for the end bodies, so in this case locking stiffener is mounted

onto drive unit cover; and with tile fascia option, it will be mounted in the recess of vertical trim.

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

Each Drive Type units shall have Locking Knob near the drive wheel for manual locking of individual

units when a person is using those units. Knob shall be rotated to unlock position when units are to

be moved. End stoppers shall be provided to prevent derailment.The nuts & bolts are galvanized /

blackodized / Zn Plated. Also total no. of loading levels per understructure shall be 20 for TD2.

Label holder - It is an aluminium extrusion of length 396mm for LD/SD and 796mm for TD, fitted on

to front cover of body. The Paper is 300GSM matt milky white sticker paper, to be inserted into the

aluminium extrusion. The length of paper is 394mm for LD/SD and 794mm for TD. Over that a

transparent plastic of corresponding length of 150-200 micron polythene is to be inserted.TD units

are designed with tie rod assembly options as well. it acts as a substitute to the back panels (only in

twin body) if the customer chooses to not have back panels. The assembly consists of 2 tie rods,

fixing brackets and 2 turnbuckles. The tie rods are fixed in a shape of ‘X’ between two opposite

shelves. The tie rods are made of 4mm diameter rods of MS while the fixing brackets are made of

2mm thk. CRCA Steel conforming to IS: 513 Gr.D. This assembly is available for both heights –

CHANNELS (RAILS)

121 Optz Plus D2 CHNL 2400mm 10.00 No. 27025.78 Rs. Twenty Seven Thousand Twenty

Five & Paise Seventy Eight Only

It consists of ‘C’ section 2 mm thk HR sheet & Square 25.4mm X 2mm thk ERW tube – both

connected by screws. Prior to the grouting of the guide channels with the help of raul plug &

screw, ensure the ground is level. The rail channels are of 3 lengths i.e., 800mm, 1600mm and

122 Optz Plus D2 CHNL 800mm 10.00 No. 12143.21 Rs. Twelve Thousand One Hundred

Forty Three & Paise Twenty One Only

It consists of ‘C’ section 2 mm thk HR sheet & Square 25.4mm X 2mm thk ERW tube – both

connected by screws. Prior to the grouting of the guide channels with the help of raul plug &

screw, ensure the ground is level. The rail channels are of 3 lengths i.e., 800mm, 1600mm and

TOTAL CIVILAMOUNT

(B-Electrical Work)

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

123A Providing and erecting Point wiring with 1.1 KV grade ISI marked 2 X 1.5 sq. mm copper PVC 948.00 Point 605.00 RS: Six Hundred Five only

insulted FRLS-H wire with 1.5 sq. mm (green) copper PVC insulated FRLS-H wire for earth continuity

in FIA approved ISI mark medium class white colour 20/25 mm dia. embossed rigid PVC pipe with

PVC fitting fixed with adhesive solution erected on/in Brick Wall / slab along with continuous G.I.

fish wire to draw wires and laid in approved manner zari for PVC pipe and boxes shall be filled with

cement mortar and finishing the surface to match the wall / ceiling complete with approved make

5/6 Amp. ISI mark modular type switch and accessories mounted in 20 G. G.I. company fabricated

metallic box covered with appropriate front plate modules erected flushed with wall / ceiling with

necessary modular lamp holder / modular ceiling rose / HD Connector (make & model approved by

EIC and matching colur with switches accessories) ( Deep GI Junction box 75mm depth for Point in

slab / PVC junction for open point as per requirement ) as directed for concealed wiring. Light

point. Cat.-III.Necessary sheet / tape / polythene / sand must be erected or filled in all box to

prevent mortar going into the box. Length of point wiring must not increase than 10 mtr. For that

necessary switch boards and their locations must be finalised before execution by agency

otherwise payment will not be done for extra long point. (For future extention, if required, agency

has to erect one higher size metal box and modular plate as per instruction of EIC. Cost of blank

plate shall be paid as per tender item) [This item include cleaning (inside/outside) of all G.I. switch

boards, electric point box, fan box, MCBDB & box cutting plaster finishing for arround modular

plate without any gap] [conductor resistance should be as per IS:8130/1984]

123B For Secondary light point Cat.-III 295.00 Point 208.00 RS: Two Hundred Eight only

123C For Bell Point Cat.-III 119.00 Point 605.00 RS: Six Hundred Five only

123D For Fan Point (with 6 A. Modular type switch and two module hum free EME Five step Rotary type 187.00 Point 842.00 RS: Eight Hundred Forty Two

Electronic fan regulator both having ISI mark) Cat.-III only

123E For separate Point (with 6 Amp. Switch & 3/5 pin socket both having ISI mark) Cat.-III 470.00 Point 636.00 RS: Six Hundred Thirty Six only

123F For Looped on switch board (with 6 Amp. Switch & 3/5 pin socket both having ISI mark) Cat.-III. 275.00 Point 306.00 RS: Three Hundred Six only

124A Providing and erecting Medium Class FIA approved and ISI mark white colour (embossed) RIGID 580.00 Mtr. 24.00 RS: Twenty Four only

PVC PIPES of following size complete erected with necessary PVC fittings & Junction boxes fixed

with adhesive solution & clamps on / in wall / ceiling along with continuous fish wire to draw mains

with necessary fittings and junction boxes for following dia. (a) 20 mm. dia.

124B For 25mm dia. 8750.00 Mtr. 33.00 RS: Thirty Three only

124C 32 mm dia. 470.00 Mtr. 54.00 RS: Fifty Four only

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

125A Providing and laying Mains with FRLS-H PVC Insulated wire ISI marked 1.1 KV grade with FIA 2850.00 Mtr. 81.00 RS: Eighty One only

approved ISI mark medium class 20/25/32 mm dia. embossed rigid PVC pipe with PVC fitting fixed

with adhesive solution to be erected on/in brick wall / slab along with continuous G. I. fish wire to

draw mains laid in approved manner with plastering by cement mortar & finishing the surface to

match the wall / ceiling complete with FRLSH PVC insulated wire for earth continuity. (Approved ISI

make only) [a] 2 x 1.5 sq.mm. FRLS copper multi stranded conductor mains with 1.5 sq.mm. FRLS-

H copper multi stranded conductor for earthing as per standard colour code. [conductor resistance

should be as per IS:8130/1984]

125B 2 x 2.5 sq.mm. FRLS-H copper multi stranded conductor mains with 1.5 sq.mm. FRLS-H copper 2730.00 Mtr. 108.00 RS: One Hundred Eight only

multi stranded conductor for earthing as per standard colour code. (Conductor resistance should

be as per IS:8130/1984)

125C 2 x 4.0 sq.mm. FRLS-H copper multi stranded conductor mains with 2.5 sq.mm. FRLS-H copper 510.00 Mtr. 145.00 RS: One Hundred Forty Five

multi stranded conductor for earthing as per standard colour code. [conductor resistance should be only

as per IS:8130/1984]

125D 2 x6.0 sq.mm. FRLS-H copper multi stranded conductor mains with 2.5 sq.mm. FRLS-H copper 140.00 Mtr. 192.00 RS: One Hundred Ninty Two

multi stranded conductor for earthing as per standard colour code. [conductor resistance should be only

as per IS:8130/1984]

125E 4 x10.0 sq.mm. FRLS-H copper multi stranded conductor mains with 4.0 sq.mm. FRLS-H copper 1620.00 Mtr. 553.00 RS: Five Hundred Fifty Three

multi stranded conductor for earthing as per standard colour code. [conductor resistance should be only

as per IS:8130/1984]

126 Providing & fixing 25 mm. dia. PVC insulated G.I. corrugated Flexible pipe with necessary socket, 750.00 Mtr. 37.10 RS: Thirty Seven and Paise Ten

PVC bushes saddle, Check-nuts etc. complete of following sizes. only

127 Providing and erecting Plug Point wiring with 1.1 KV grade ISI marked approved make 2 x 2.5 65.00 Point 930.00 RS: Nine Hundred Thirty only

sq.mm copper PVC insulated FRLS-H wire with 1.5 sq.mm (green) copper PVC insulated FRLS-H wire

for earth continuity in FIA approved ISI mark white colour medium class 20/25 mm dia.

embossed rigid PVC pipe with PVC fitting fixed with adhesive solution erected in wall/slab along

with continuous G. I. fish wire to draw wires and laid in approved manner zari for PVC pipe &

boxes shall be filled with cement mortar & finishing the surface to match the wall / ceiling

complete with 16 Amp Modular type Swich and accessories mounted in 20 G. GI company

fabricated metallic box covered with appropriate front plate modules erected flushed with wall. (a)

16 Amp. Indicator switch & 1 No. 16 A universal socket white colour suitable for 3/5 pin top duly

both having ISI mark. (Necessary sheet / tape / polythene / sand must be erected or filled in all

box To Prevent Mortor Going In To The Box) Cat.-III.[conductor resistance should be as per

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

128 Providing & Erecting Plug Point wiring with approved ISI marked 1.1 kv grade 2 x 4.0 sq.mm copper 14.00 Point 1087.00 RS: One Thousand Ten Hundred

PVC insulated FRLSH wire with 2.5 sq.mm (green) copper PVC insulated FRLSH wire for earth Eighty Seven only

continuity in FIA approved ISI mark white colour medium class 25 mm dia. embossed rigid PVC

pipe with PVC fitting fixed with adhesive solution erected in wall / slab along with continuous G.I.

fish wire to draw wires and laid in approved manner. zari for PVC pipe & boxes shall be filled with

cement mortar & finishing the surface to match the wall / ceiling complete with approved make

16 Amp. Modular type indicator switch and accessories mounted in 20 SWG GI company fabricated

metallic box covered with appropriate front plate modules erected flushed with wall / ceiling. (a)

16Amp Indicator switch & 1 No. 16 A universal socket white colour suitable for 3 pin top duly

both having ISI mark with Four Module Box & Four Module Plate (A.C/ Gyser POINT ONLY) CAT

III (Necessary sheet / tape / polythene / sand must be erected or filled in all box to Prevent Mortor

Going In to The Box) [conductor resistance should be as per IS:8130/1984]

129A Providing & erecting following type of Modular Type Accessories mounted with 20 G G.I. company 18.00 Each 159.00 RS: One Hundred Fifty Nine

fabricated metalic box, single mounting base frame covered with textured / metallic front plate, only

modules erected with necessary connection. As desired by Engineer in charge. TV Co-axial Socket

outlet. Cat.-III

129B Blank Plate Single. Cat.-III 500.00 Each 25.00 RS: Twenty Five only

129C One No. SP 6 Amp.Cat.-III 405.00 Each 150.00 RS: One Hundred Fifty only

129D One No 5 pin 6Amp plug Cat.-III 1190.00 Each 150.00 RS: One Hundred Fifty only

129E 16 Amp. SP one way indicator switch Cat.-III 395.00 Each 179.00 RS: One Hundred Seventy Nine

129F 6/16Amp. Universal socket Cat.-III 35.00 Each 198.00 RS: One Hundred Ninty Eight

129G RJ-11 Telephone Socket Cat-III 24.00 Each 159.00 RS: One Hundred Fifty Nine

129H Modem Jack for Computer Open RJ-45. Cat.-III. 22.00 Each 159.00 RS: One Hundred Fifty Nine

129I Modular Indicating Call Bell Cat.-III. 100.00 Each 326.00 RS: Three Hundred Twenty Six

129J Modular Buzzer Cat.-III. 100.00 Each 148.00 RS: One Hundred Forty Eight

130 Providing & erecting following size of TV Co-axial flexible cable comprising inner conductor of solid 950.00 Mtr. 39.00 RS: Thirty Nine only

bare copper insulated with Foam PE & Secondary conductor made of poly - Aluminium film bonded

Al. Braids @ suitable coverage overall sheathed with black PVC insulation.[a] RG-6 [Polycab/

Finolex / RR Kabel Make]

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

131 Providing ad erecting approved make single phase Double Door metal clad D.B. as per relevant 2.00 Each 6254.00 RS: Six Thousand Two Hundred Fifty

indian standards ammended upto date. Four only

Supplying and fixing following way single phase MCB distrubution board of company fabricated

with sheet box with powder coated inside and outside after apply seven tank chemical process of

1.2mm thick CRCA sheet ( Door, Back side & body )cover complete with suitable integral single

piece construction tinned copper busbar and link with all necessary interconnection and with

necessary size MS frame for mounting MCBDB. Manufacturer must be provided (1) IP 43 and as per

IS:8623-1 & 3, IEC 61439-1 & 3 having D type PU gasket. (2) Seven tank Powder coating Certificate

(3) Tinned Copper/Brass make neutral & Earthing link with isolation & Protecting Cover for

Volts on surface / recess complete with loose wire box, terminal connectors for all incoming and

outgoing circuits, with suitable size FRLS PVC insulated copper conductor up to terminal blocks and

internal connection, tinned coppper bus bar, 1 no. tinned copper neutral link, tinned copper earth

bar, din bar, detachable gland plate, interconnections, powder painted including earthing etc.

Single phase incoming and horizontal single phase outgoing. For 16 Way MCBDB: Including

Amp. 30 mA double pole ELCB (ELCB confirming to IS:12640/1988 having sensitivity of 30 mA and

breaking capacity of 10 KA), MCB 40 Amp. double pole switch (C curve confirms to IS:8828 having

breaking capacity of 10 KA) and S.P. MCB of rating 6 to 32 Amp. with NL suitable to operate on

Volt A.C. power. (6 Amp:- 6 Nos., 16 Amp:- 6 Nos..) (The DBs should be used of same company of

MCB / ELCB to be used) (MCBDB must be erected in line & level with spirit level and finish the

external edge with box cutting plaster) (Same colour MCB(SP/DP) should be used as same as

MCBDB) [Including Necessary numbering / marking on box done with red colour radium sticker as

per site requirement and instructions given by EIC on site. Font / number size given by EIC on site

as per requirement]

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

132 Providing ad erecting approved make 8 Way Three phase Double Door Horizontal / Vertical type 34.00 Each 14363.00 RS: Fourteen Thousand Three

(as per site requirement and EIC instruction) outgoing per phase outgoing type (PPI) metal clad Hundred Sixty Three only

D.B. as per relevant Indian standards amended up to date.

Supplying and fixing following way Three phase MCB distribution board with company wire links

for internal connections having colour code and with suitable lugs and company fabricated with

sheet box with powder coated inside and outside after apply seven tank chemical process of

1.2mm thick CRCA sheet ( Door, Back side & body ) cover complete with suitable integral single

piece construction, tinned copper busbar and link with all necessary interconnection and with

necessary size GI frame (if required for surface type) for mounting MCBDB. Manufacturer must be

provided (1) IP 43 and as per IS:8623-1 & 3, IEC 61439-1 & 3 having D type PU gasket. (2) Seven

tank Powder coating Certificate (3) Tinned Copper/Brass make neutral & Earthing link with

isolation & Protecting Cover for 440 Volts on surface / recess complete with loose wire box,

terminal connectors for all incoming and outgoing circuits, with suitable size FRLS PVC 10mm2

insulated copper conductor with Pin

type lug up to terminal blocks and internal connection, tinned copper bus bar, 4 nos. tinned copper

neutral link, 4 nos. tinned copper earth bar, din bar-4 nos., detachable gland plate,

interconnections, including earthing etc. Three phase incoming and single phase outgoing.Total

quantity of wire link: 13 Nos. For Three phase 8 Way Double Door PPI MCBDB (The DBs should be

used of same company of MCB / ELCB to be used) (MCBDB must be erected in line & level with

spirit level and finish the external edge with box cutting plaster) (Same colour

MCB(SP/DP) should be used as same as MCBDB) [Including Necessary numbering / marking on box

done with red colour radium sticker as per site requirement and instructions given by EIC on site.

Font / number size given by EIC on site as per requirement] (a) For 8 Way TPN MCBDB with I/c:-

C- curve 40/63Amp FP MCB 10KA, 40A DP ELCB, 30ma,10KA -03 nos & O/G :- C-curve 6-32 Amp

SP MCB :- 18 Nos.

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

133 SITC of BIS approved 30 W recess / surface mount 300mm X 600mm LED office backlit luminaire 340.00 Each 3290.00 RS: Three Thousand Two Hundred

with cool white / natural white color temperature (5700K / 4000K as per ANSI) , CRI > 80, SDCM<3 Ninty only

, LEDs used have a life of 50000 burning hrs (CREE / OSRAM / PHILIPHS make LED used in fitting ) .

& Lumen maintenance as per L70, The Luminaire System efficacy of >100 LPW for CDL CCT & >95

LPW for NW CCT. Fixture housing made fabricated CRCA sheet metal for rapid thermal healing &

Powder coated by Corrosion resistant Nano coating technology. The fixture is provided with high

transmittance PS / PR diffuser to optimize Glare with Less UGR value. Complies standard UGR <16

for indoor application. The fixture should have a protection of Ingress of IP20 or more. Luminaire

housing must have OEM logo embossed/ engraved (no stickering is allowed). Luminaire should

have own make high efficiency Seprate electronic driver with voltage range of 140-270V, Power

factor > 0.95 and THD < 10%, Luminaire should be provided with 4kV surge protection for the

luminaire for better compatibility. Luminaire should be with protections like Over Voltage

protection withstand up to 440V / AC , short circuit, Mis wiring , reverse polarity with LM 79, LM

80, & TTC certificates will be provided from a NABL accredited lab. Luminaire performance & Safety

should comply to IEC 60598, IS 10322-5, IS 161-03/05/06/07, Surge : IEC 61000-4-5, EMC : EN

55015. All certificates supporting the technical parameters of luminaire & OEM scope must be

submitted. The BIS of luminaire should carry own manufacturing facility of OEM. Dedicated vendor

/ sub- vendor facilities are not accepted. OEM should have own manufacturing facility for LED

fixtures in India which should be functional for last 10 years, Manufacturer should have their own

NABL accredited testing laboratory for EMI-EMC test, Vibration compatibility test, Salinity spray

test, IP / IK test, in house powder coating facility, in house casting plant, robo-photometric

laboratory and in house driver manufacturing facility, SMT line in India. Manufacturer should have

Certification pertaining to CE certifications, ROHS compliant, BIS certificate for drivers and

luminaires respectively.[Note:-The manufacturer / authorized Channel partner of the manufacturer

has to submit 5 yrs. free replacement Guarantee for complete Fixture

( Make : Regent lighting, Lighting Technologies (LT)( Preferable), Signify & Model Approved by

EIC subject to above specification )

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

134 SITC of Indoor Commercial Recess / Surface mounted (IP20) 24 W Cool/Natural white/Warm 415.00 Each 1159.00 RS: One Thousand One Hundred

(6K/4K) white Color back lit LED Down lighter with BIS approved separate potted driver , CRI > 80, Fifty Nine only

SDCM<3 , LEDs used have a life of 50000 burning hrs (LED from Philips Lumileds, CREE, Nichia,

Bridgelux, Seoul & Osram). & Lumen maintenance as per L70, The Luminaire System efficacy of

>100 LPW for CDL CCT & >95 LPW for NW CCT.The fixure must have min. 2400 lumen light output.

Fixture housing made from aluminium pressure die cast for rapid thermal healing & Powder coated

by Corrosion resistant Nano coating technology(no plastic part allowed) . The fixture is provided

with high transmittance PS / PR diffuser to optimize Glare with Less UGR value. Complies standard

UGR <16 for indoor application.The LED's should be mounted on back lit metal core PCB for better

heat conduction and long life of LED, The fixture should have a protection of Ingress of IP20 or

more. Luminaire housing must have OEM logo embossed/ engraved (no stickering is allowed).

Luminaire should have own make high efficiency electronic driver with voltage range of 140-270V,

Power factor > 0.95 and THD < 10% Luminaire should be provided with 4kV surge protection for

the luminaire for better compatibility. Luminaire should be with protections like Over Voltage

protection withstand up to 440V / AC , short circuit, Mis wiring , reverse polarity with LM 79, LM

80, & TTC certificates will be provided from a NABL accredited lab. Luminaire performance & Safety

should comply to IEC 60598, IS 10322-5, IS 161-03/05/06/07, Surge : IEC 61000-4-5, EMC : EN

55015. All certificates supporting the technical parameters of luminaire & OEM scope must be

submitted. The BIS of luminaire should carry own manufacturing facility of OEM. Dedicated vendor

/ sub- vendor facilities are not accepted. OEM should have own manufacturing facility for LED

fixtures in India which should be functional for last 10 years, Manufacturer should have their own

NABL accredited testing laboratory for EMI-EMC test, Vibration compatibility test, Salinity spray

test, IP / IK test, in house powder coating facility, in house casting plant, robo-photometric

laboratory and in house driver manufacturing facility, SMT line in India. Manufacturer should have

Certification pertaining to CE certifications, ROHS compliant, BIS certificate for drivers and

luminaires respectively.[Note:-The manufacturer / authorized Channel partner of the manufacturer

has to submit 5 yrs. free replacement Guarantee for complete Fixtur ( Make : Regent lighting,

Lighting Technologies (LT)( Preferable), Signify & Model Approved by EIC subject to above

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

135 SITC of Indoor Commercial Recess / Surface mounted (IP20) 18 W Cool/Natural white/Warm 155.00 Each 1027.00 RS: One Thousand Ten Hundred

(6K/4K) white Color back lit LED Down lighter with BIS approved separate potted driver , CRI > 80, Twenty Seven only

SDCM<3 , LEDs used have a life of 50000 burning hrs (LED from Philips Lumileds, CREE, Nichia,

Bridgelux, Seoul & Osram). & Lumen maintenance as per L70, The Luminaire System efficacy of

>100 LPW for CDL CCT & >95 LPW for NW CCT.The fixure must have min. 1800 lumen light output.

Fixture housing made from aluminium pressure die cast for rapid thermal healing & Powder coated

by Corrosion resistant Nano coating technology(no plastic part allowed) . The fixture is provided

with high transmittance PS / PR diffuser to optimize Glare with Less UGR value. Complies standard

UGR <16 for indoor application.The LED's should be mounted on back lit metal core PCB for better

heat conduction and long life of LED, The fixture should have a protection of Ingress of IP20 or

more. Luminaire housing must have OEM logo embossed/ engraved (no stickering is allowed).

Luminaire should have own make high efficiency electronic driver with voltage range of 140-270V,

Power factor > 0.95 and THD < 10% Luminaire should be provided with 4kV surge protection for

the luminaire for better compatibility. Luminaire should be with protections like Over Voltage

protection withstand up to 440V / AC , short circuit, Mis wiring , reverse polarity with LM 79, LM

80, & TTC certificates will be provided from a NABL accredited lab. Luminaire performance & Safety

should comply to IEC 60598, IS 10322-5, IS 161-03/05/06/07, Surge : IEC 61000-4-5, EMC : EN

55015. All certificates supporting the technical parameters of luminaire & OEM scope must be

submitted. The BIS of luminaire should carry own manufacturing facility of OEM. Dedicated vendor

/ sub- vendor facilities are not accepted. OEM should have own manufacturing facility for LED

fixtures in India which should be functional for last 10 years, Manufacturer should have their own

NABL accredited testing laboratory for EMI-EMC test, Vibration compatibility test, Salinity spray

test, IP / IK test, in house powder coating facility, in house casting plant, robo-photometric

laboratory and in house driver manufacturing facility, SMT line in India. Manufacturer should have

Certification pertaining to CE certifications, ROHS compliant, BIS certificate for drivers and

luminaires respectively.[Note:-The manufacturer / authorized Channel partner of the manufacturer

has to submit 5 yrs. free replacement Guarantee for complete Fixture ( Make : Regent lighting,

Lighting Technologies (LT)( Preferable), Signify & Model Approved by EIC subject to above

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

136 SITC of Indoor Commercial Recess / Surface mounted (IP20) 12 W Cool/Natural white/Warm 50.00 Each 853.00 RS: Eight Hundred Fifty Three

(6K/4K) white Color back lit LED Down lighter with BIS approved separate potted driver , CRI > 80, only

SDCM<3 , LEDs used have a life of 50000 burning hrs (LED from Philips Lumileds, CREE, Nichia,

Bridgelux, Seoul & Osram). & Lumen maintenance as per L70, The Luminaire System efficacy of

>100 LPW for CDL CCT & >95 LPW for NW CCT.The fixure must have min. 1200 lumen light output.

Fixture housing made from aluminium pressure die cast for rapid thermal healing & Powder coated

by Corrosion resistant Nano coating technology(no plastic part allowed) . The fixture is provided

with high transmittance PS / PR diffuser to optimize Glare with Less UGR value. Complies standard

UGR <16 for indoor application.The LED's should be mounted on back lit metal core PCB for better

heat conduction and long life of LED, The fixture should have a protection of Ingress of IP20 or

more. Luminaire housing must have OEM logo embossed/ engraved (no stickering is allowed).

Luminaire should have own make high efficiency electronic driver with voltage range of 140-270V,

Power factor > 0.95 and THD < 10% Luminaire should be provided with 4kV surge protection for

the luminaire for better compatibility. Luminaire should be with protections like Over Voltage

protection withstand up to 440V / AC , short circuit, Mis wiring , reverse polarity with LM 79, LM

80, & TTC certificates will be provided from a NABL accredited lab. Luminaire performance & Safety

should comply to IEC 60598, IS 10322-5, IS 161-03/05/06/07, Surge : IEC 61000-4-5, EMC : EN

55015. All certificates supporting the technical parameters of luminaire & OEM scope must be

submitted. The BIS of luminaire should carry own manufacturing facility of OEM. Dedicated vendor

/ sub- vendor facilities are not accepted. OEM should have own manufacturing facility for LED

fixtures in India which should be functional for last 10 years, Manufacturer should have their own

NABL accredited testing laboratory for EMI-EMC test, Vibration compatibility test, Salinity spray

test, IP / IK test, in house powder coating facility, in house casting plant, robo-photometric

laboratory and in house driver manufacturing facility, SMT line in India. Manufacturer should have

Certification pertaining to CE certifications, ROHS compliant, BIS certificate for drivers and

luminaires respectively.[Note:-The manufacturer / authorized Channel partner of the manufacturer

has to submit 5 yrs. free replacement Guarantee for complete Fixture ( Make : Regent lighting,

Lighting Technologies (LT)( Preferable), Signify & Model Approved by EIC subject to above

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

137 SITC of of BIS approved 12 W LED indoor Curved Deep Diffused Recessed Down Light fittings 50.00 Each 3565.00 RS: Three Thousand Five Hundred

Cool/Natural white/Warm (6K/4K) white Color back lit LED Down lighter with BIS approved Sixty Five only

separate potted driver , CRI > 80, SDCM<3 , LEDs used have a life of 50,000 burning hrs. & Lumen

maintenance as per L70, The Luminaire System efficacy of >100 LPW for CDL CCT & > 95 LPW for

NW CCT. Fixture housing must be made of PDC Aluminium foroptimal thermal conductivity/

healing & Powder coated by Corrosion resistant Nano coating technology. The fixture is provided

with injection molded UV stabilized inverted curved PC deep diffuser to optimize Glare & light

transmission with Less UGR value. The fixture should have a protection of Ingress of IP20 or more.

Luminaire housing must have OEM logo embossed/ engraved (no stickering is allowed). Luminaire

should have own make high efficiency electronic driver with voltage range of 140-270V, Power

factor > 0.95 and THD < 10%,IK 02, Class1 electrical insulation, RG0 Photo biological safety,

Luminaire should be provided with Inbuilt surge protection of 4KV & additional SPD with 6KV

protection for the luminaire for better compatibility. Luminaire should be with protections like

Over Voltage protection withstand up to 440V / AC , short circuit, Mis wiring , reverse polarity with

LM 79, LM 80, & TTC certificates will be provided from a NABL accredited lab. Luminaire

performance & Safety should comply to IEC 60598, IS 10322-5, IS 161-03/05/06/07, Surge : IEC

61000-4-5, EMC : EN 55015. All certificates supporting the technical parameters of luminaire &

OEM scope must be submitted. The BIS of luminaire should carry own manufacturing facility of

OEM. Dedicated vendor / sub- vendor facilities are not accepted. OEM should have own

manufacturing facility for LED fixtures in India which should be functional for last 10 years,

Manufacturer should have their own NABL accredited testing laboratory for EMI-EMC test,

Vibration compatibility test, Salinity spray test, IP / IK test, in house powder coating facility, in

house casting plant, robo-photometric laboratory and in house driver manufacturing facility, SMT

line in India. Manufacturer should have Certification pertaining to CE certifications, ROHS

compliant, BIS certificate for drivers and luminaires respectively.[Note:-The manufacturer /

authorized Channel partner of the manufacturer has to submit 5 yrs. free replacement Guarantee

for complete Fixtur ( Make : Lighting Technologies make Minique curve deep diffused model (

Preferable) & Regent lighting, Signify make & Model Approved by EIC subject to above

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

138 SITC of of BIS approved 24 W LED indoor Curved Deep Diffused Recessed Down Light fittings 50.00 Each 4543.00 RS: Four Thousand Five Hundred

Cool/Natural white/Warm (6K/4K) white Color back lit LED Down lighter with BIS approved Forty Three only

separate potted driver , CRI > 80, SDCM<3 , LEDs used have a life of 50,000 burning hrs. & Lumen

maintenance as per L70, The Luminaire System efficacy of >100 LPW for CDL CCT & > 95 LPW for

NW CCT. Fixture housing must be made of PDC Aluminium foroptimal thermal conductivity/

healing & Powder coated by Corrosion resistant Nano coating technology. The fixture is provided

with injection molded UV stabilized inverted curved PC deep diffuser to optimize Glare & light

transmission with Less UGR value. The fixture should have a protection of Ingress of IP20 or more.

Luminaire housing must have OEM logo embossed/ engraved (no stickering is allowed). Luminaire

should have own make high efficiency electronic driver with voltage range of 140-270V, Power

factor > 0.95 and THD < 10%,IK 02, Class1 electrical insulation, RG0 Photo biological safety,

Luminaire should be provided with Inbuilt surge protection of 4KV & additional SPD with 6KV

protection for the luminaire for better compatibility. Luminaire should be with protections like

Over Voltage protection withstand up to 440V / AC , short circuit, Mis wiring , reverse polarity with

LM 79, LM 80, & TTC certificates will be provided from a NABL accredited lab. Luminaire

performance & Safety should comply to IEC 60598, IS 10322-5, IS 161-03/05/06/07, Surge : IEC

61000-4-5, EMC : EN 55015. All certificates supporting the technical parameters of luminaire &

OEM scope must be submitted. The BIS of luminaire should carry own manufacturing facility of

OEM. Dedicated vendor / sub- vendor facilities are not accepted. OEM should have own

manufacturing facility for LED fixtures in India which should be functional for last 10 years,

Manufacturer should have their own NABL accredited testing laboratory for EMI-EMC test,

Vibration compatibility test, Salinity spray test, IP / IK test, in house powder coating facility, in

house casting plant, robo-photometric laboratory and in house driver manufacturing facility, SMT

line in India. Manufacturer should have Certification pertaining to CE certifications, ROHS

compliant, BIS certificate for drivers and luminaires respectively.[Note:-The manufacturer /

authorized Channel partner of the manufacturer has to submit 5 yrs. free replacement Guarantee

for complete Fixtur ( Make : Lighting Technologies make Minique curve deep diffused model (

Preferable )& Regent lighting, Signify make & Model Approved by EIC subject to above

139 SITC of decorative wall bracket fittings complete with LED lamp and rust free fittings components 9.00 Each 1696.00 RS: One Thousand Six Hundred

mounted in chrome finish housing with holder ,clear/opaque glass diffuser complete erected with Ninty Six only

lead wires with minimum 15 wattage capacity as per instruction engineer

incharge/architect/authority . (Note:-The manufacturer/ authorized Channel partner of the

manufacturer has to submit 5 yrs free replacement Guarantee for complete Fixture) [Approval will

be given strictly subject to item specification] ( Make : Regent lighting, Lighting Technologies (LT),

Signify & Model Approved by EIC subject to above specification )

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

140 Supplying and Erecting LED indoor fitting having 1100mm long with LED of wattage Mashroom 10.00 Each 370.00 RS: Three Hundred Seventy

shape 0.2W to 0.5W assemble on single MCPCB with housing use as a heat sink shall be made from only

white powder coating Aluminum extrusion having enough strength (sample must be approved by

EIC)with polycarbonate diffuser with following specification:

(A) Company mark/name on the fitting. (B) Rated input voltage and frequency: 220V to 240 VAC ;

50Hz. (C) Rated input wattage: max. 24w (D) Rated input current : 0.2 Amp

(E) Power Factor : Min. 0.90 (F) ATHD :Max. 15% (G) Rated Luminous flux: Min. 2420 lm

(H) CCT: 6500K (I) CRI: Min. 80Ra (J) Driver Efficiency: Min. 80%

(K) LED life span: Min. 50000 Hrs @ L70 (Certificate shall be attached)

(L) Over Voltage protection: Withstand up to 440V/AC for 4 Hrs. (M) Surge protection : Min. 2KV

(N) IP rating: IP 20 (O) IK rating : IK 02 (P) Short circuit , Open circuit & Reverse Polarity Protection

must be provided (Q) Fixing Clamp min.12mm wide heavy duty design & strength should be

sufficient to hold the fitting erected on wall or ceiling (R)

3 core x 1.0 Sqmm copper wire with min. 1ft (300mm) earthing connector.

(Note:-The manufacturer/ authorized Channel partner of the manufacturer has to submit 5 yrs

free replacement Guarantee for complete Fixture) [Approval will be given strictly subject to item

specification] ( Make : Regent lighting, Lighting Technologies (LT), Signify & Model Approved by EIC

subject to above specification )

141 Providing and erecting max. 10 watt LED battern having main housing having powder coated 13.00 Each 309.00 RS: Three Hundred Nine only

aluminium extruded & mashroom shape polycarbonate diffuser. Electrically & photomatry

parameters are as undr: 240 V, 50 Hz, System wattage 10 w ± 10 %, PF ≥ 0.95, system luments min.

1000, CCT- 3000K to 6500K, CRI ≥ 80, THD ≤ 15%, delivery efficiency ≥ 85%, L80 Certified LED,

30000 hrs. @ L70, Electronic CC driver, 3 core insulated copper wire for internal wiring, IP20,

operating voltage: 160 to 270 V, Surge - 2 KV, Fixing Clamp min.12mm wide heavy duty design &

strength should be sufficient to hold the fitting erected on wall or ceiling,Length of fitting should

be min.600mm,3 core x 0.5 Sqmm copper wire with min. 1ft (300mm) & earthing connector.

(Note:-The manufacturer/ authorized Channel partner of the manufacturer has to submit 5 yrs

free replacement Guarantee for complete Fixture) [Approval will be given strictly subject to item

specification] ( Make : Regent lighting, Lighting Technologies (LT), Signify & Model Approved by

EIC subject to above specification )

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

142 SITC of LED indoor strip light with system power 7.2W/ mtr. with CCT in Warm/ Natural White 85.00 Mtr. 218.00 RS: Two Hundred Eighteen only

color temperature 3000K 4000K, CRI ≥ 80 , SDCM<3. LEDs used must have a life of 50000 burning

hrs. & Lumen maintenance as per L70, The Luminaire System efficacy must be of > 90LPW. Total

Lumens of fixture must be 900.The strip must be compatible for indoor application with IP20

protection 24V DC system. Strip application should be suitable for any shape and dimension with

Indoor application flexible design and easy for Installation with clamps and separate driver as

electrical and mounting accessories.. (Note:-The manufacturer/ authorised Channel partner of

the manufacturer has to submit 5yr free replcement Guarantee for complete Fixture ) ( Make :

Regent lighting, Lighting Technologies (LT), Signify & Model Approved by EIC subject to above

specification )

143 SITC of Max.30 Watt per mtr. recessed type Profile LED Indoor Commercial make high efficiency 60.00 Mtr. 3545.00 RS: Three Thousand Five Hundred

light with separate driver & Extruded aluminium housing with corrosion resistant powder coated Forty Five only

finish with high quality diffused polycarbonate diffuser with high brightness LED strip complete (

only Philips/ LT/ Regent make ). fixture wide voltage range from 160V to 270V, 50/60 HZ , @

240V application.The Fixture should be able to easily mount Grid False/ Gypsum ceiling. Profile

assembly 1.0 Mtr, 30 W, 4000 deg. k. (Note:-The manufacturer/ authorised Channel partner of

the manufacturer has to submit 5yr free replcement Guarantee for complete Fixture ) ( Make :

Regent lighting, Lighting Technologies (LT)( Preferable), Signify & Model Approved by EIC subject to

above specification )

144 Supply, Installation, Testing and Commissioning of 1200mm sweep, BEE 5 Star rated, Max. 30Watt 187.00 Each 2603.00 RS: Two Thousand Six Hundred

Ceiling fan with Brush Less Direct Current (BLDC) permanent ferrite magnet Motor, class of Three only

insulation: B/E, Double ball bearings, Rust free 3 nos.Aluminium blades, 2 nos. canopies, shackle

kit with earthing provision, copper winding, Power factor not less than 0.9, Service Value

(CMM/W) minimum 7.5, Air delivery minimum 220 CMM, Minimum 345 RPM,230v (tolerance as

per IS : 374 2019), THD less than 10%, compitible with electronic regulator unit for Five Speed

Control and all remaining accessories including safety pin, nut bolts, washers, temperature rise

equal to 75 degree C (Max.), suitable for 140 to 285 Voltage and rectifier circuit with surge, over

current and overload protection , 50 Hz, Single phase AC Supply, earthing etc. Complete as

required.[ Make shall be approved by Engineer in Charge] (A) 1200 mm Sweep (48" )

( Make Havells Efficiencia Dx , Bajaj Energos 28 and Crompton make and model approved by EIC

suject to above specification )

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

145 Supplying and erecting approved make oscillating type medium duty bracket fan with Aluminium 72.00 Each

RS: Three Thousand Four Hundred Eighty Four only

Blades A.C. 23OV. 50cy/s, with thermal overload protection wall mounted with height adjustment

and rotary tilting device complete with guard, pull cord for speed and oscillation flexible Core plug

top complete erected with lead wires as directed.s as directed. Model approved by EIC only. (a)

450 mm sweep ( Make:- Baja,Usha, Crompton, Orient, Havells)

146 Supplying and erecting approved make 200mm sweep low noise decorative exhaust fan having 11.00 Each 1353.00 RS: One Thousand Three Hundred

Aerodynamically designed and Blanced Blade, Blade finish Opaque,body colour White , finish Fifty Three only

Glossy , Rated Speed 1350/1800 revolution per minute ,air delivery 500m³ / hr , noise level 50 dB

, Power Consumption 35 W, ,Rated Voltage 230 V , no. of blades 7 , guard 18 Louvers , square

frame ABS body with inbuilt lowers and square frame.( Havells Make Ventilair LX or Bajaj, Usha,

Crompton and Equivalent Model Approved by EIC subject to Above Specification )

147 Providing & erecting Wrought Iron Fan Hook erected with necessary cementation & Plastering or 187.00 Each 43.00 RS: Forty Three only

double bolted type Anchor fastener fan hook with 2 Nos. anchnor fastner.

148 Supplying & erecting 19/20 mm. nominal bore "B" class G.I. pipe / M.S. pipe down rod erected duly 187.00 Mtr. 107.00 RS: One Hundred Seven only

painted for fan complete with necessary 24/0.2 flat 3 core flexible Core with earthing. The down

rod thickness, hole, locking arrangement, construction, powder coating, colour shed should be

same as original down rod brought with ceiling fan. For that agency has to give original down rod

sample to fabricator and one sample down rod should be approved with EIC. After approval given

by EIC agency can use the down rod as per approved sample. If without approval down rod will be

erect on site, agency has to replace them with own cost.(Execute if fall ceiling occurs)

149 SITC of Decorative call bell Stereo type 250 Volt complete erected on existing polished wooden 14.00 Each 170.00 RS: One Hundred Seventy only

block or in M.S. box with 3mm thick white ISI mark laminated sheet. {Anchor(Chime model), Rider,

150 Supplying & erecting Electronic Type Cordless Call Bell erected on PVC/Metal board having 13.00 Each 248.00 RS: Two Hundred Forty Eight

portable bell push working on D.C. & bell on 230V A.C. supply with cells / battery only

151 Supplying and erecting horizontal / vertical mounting type storage water heater with copper 1.00 Each 11342.00 RS: Eleven Thousand Three Hundred

container housed in M.S./S.S./ABS body insulated with glass wool/puff complete with heating Forty Two only

elements,adjustable thermostats 300C to 850C, indicating lamp, safety valve, fusible plug,

etc.complete erected with coach bolts, nuts. washers & cementation (a) 25 Ltr. with 2 KW. heating

element Premium Category( Racold, Speherehot , AO Smith make only)

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

152 Supply, Installation testing and commissioning of 16 Gauge M.S. Powder coated/1.5mm GI floor 200.00 Nos. 750.00 RS: Seven Hundred Fifty only

raceway Access outlet / service junction box with 16 Gauge M.S. Powder coated Cover plate with

duct entry 25 mm / 38 mm size having epoxy powder coated trap lead with corrosion and rust free

with adjustable levelling screw of following size. [a] 300 mm x 300 mm x 50 mm depth.

153 Supply and Installation of 2.0 mm thick SS 304 for Existing Floor Junction box Cover Plate as per 25.00 Sq. 8797.00 RS: Eight Thousand Seven Hundred

Site requirement and required Size with required size SS bolt, Srew and champhear edge Mtr. Ninty Seven only

154A Supplying and laying UPVC cable trunking system comprising unplasticised polyvinyl, chloride rigid 30.00 Mtr. 275.00 RS: Two Hundred Seventy Five

material with ignition free & flame proof confirming BS .All necessary accessories and measuring of only

following sizes. [1] 75 mm x 50 mm trunking (Honeywell / LEGRAND Make Only)

154B 100 mm x 50 mm trunking (Honeywell / LEGRAND Make Only) 25.00 Mtr. 424.00 RS: Four Hundred Twenty Four

155 SITC of specified make X color for Cat.-6 Data and Y color for Cat.-6 voice cable to be done in 1900.00 Mtr 47.00 RS: Forty Seven only

prelaid PVC pipe / raceway, but without the cost of raceway or pipe (the wire is to be drawn from

MFD/ JB to outlet point) (a) CAT - 6 (For Computer Cabling and For Voice Cabling) (Molex / D- link

/ Legranad make Only)

156 SITC of 24 x 10/100/1000BASE-T ports 1.00 Each 15247.00 RS: Fifteen Thousand Two Hundred

4 x Gigabit RJ45/SFP Combo ports Forty Seven only

Advanced L2 switching and security features

L2+ Static Routing

Optional “standard mode” or “surveillance mode” management user interface as per attached

specification ( Cisco , D-link , HP make & model approved by EIC)

157 SITC of Cat 6 Jack Panel, fully loaded with 24 nos. UTP ports for PCB based IO Jacks (RJ45, TIA-568C 1.00 Each 4357.00 RS: Four Thousand Three Hundred

Category-6, Installation and Termination of all 24 nos. Catergory-6 UTP , unloaded with individually Fifty Seven only

replaceable 24 nos. Category-6 I/O Jacks complying with TIA-568.C.2, as per given jack specification

Shall be suitable for loading unshielded & shielded jacks for different category systems (CAT 6)

(Molex / D-link / Legranad make Only)

158 SITC of company fabricated Patch cords shall conform to Cat- 6 & conductor shall be stranded for 15.00 Each 155.00 RS: One Hundred Fifty Five only

better flexibility Shall support network line speeds up to 1 Gbps Shall have RJ-45 jacks. For 1 Mtr.

(Molex / D-link / Legranad make Only)

159 SITC of company fabricated Patch cords shall conform to Cat- 6 & conductor shall be stranded for 12.00 Each 199.00 RS: One Hundred Ninty Nine

better flexibility Shall support network line speeds up to 1 Gbps Shall have RJ-45 jacks. For 2 Mtr. only

(Molex / D-link / Legranad make Only)

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

160 Supply and installation of 9U steel rack for installing 4 nos. Ethernate switches/Hubs. The Rack 1.00 Each 11441.25 RS: Eleven Thousand Four Hundred

should be fully enclosed steel housing fabricated with 14 SWG sheet and powder coated with glass Forty One and Paise Twenty Five only

doors and having wire management systems. The rate includes the Exhaust Fan, 2 nos. 4 socket

and 1 switch power strip and all the wiring in the rack. ( Make:- Rittal, Valrack, APC, Legrand )

161 Providing & erecting main Distribution (MDF) indoor type, back mounted frame as per DoT 2.00 Each 1355.00 RS: One Thousand Three Hundred

standard approved with krone strips(a) Suitable for 20 pair Fifty Five only

162 Supplying & erecting Delton or approved make Telephone Cable electrolytic copper conductor PE 50.00 Mtr 126.00 RS: One Hundred Twenty Six

insulation twisted in two pairs, & wrapped with FRLS PVC tape & sheathed with FRLS PVC or HFFR only

outer Jacket suitable for telephone wiring & confirming to C-DOT erected in existing pipe.of

following size of conductors & nos.of pairs. With necessary connections. (A) Conductor size 0.5mm

(a) Unarmoured(i) Twenty Pairs

163 Providing and erecting Inverter based approved make split air-conditioning unit consisting of 1.00 Each 69448.00 RS: Sixty Nine Thousand Four

condensing unit with variable speed fan motor, inverter type hermetically sealed rotary Hundred Forty Eight only

compressor with accessories etc. duly connected separately erected evaporating unit and blower

motor with its accessories by means of extra supplied proper insulated copper tubing,drain PVC

pipes suitable for ( cost includes Eco Friendly green gas charging and 15A plug top & Remote

Control & MS Stand) with necessary core cutting.(1)For ISEER Range (KWH/KWH)(4.0 to 4.49)(A)

for 1.7 to 2 ton capacity

164 Providing and erecting one way Inverter based approved make Cassette type split air- 2.00 Each 129030.00 RS: One lac Twenty Nine Thousand

conditioning unit consisting of condensing unit with fan motor, hermetically sealed scroll/rotary Thirty only

compressor with accessories etc. duly connected separately erected evaporating unit and blower

motor with its accessories by Eco friendly Green gas charging & Internal copper wiring & Remote

control with necessary core cutting.(A) for 2 ton capacity-

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

165A Executing comprehensive (All-in-All) service & maintenance ( Four Service per year + Spare parts{ 2 1.00 Each 5598.00 RS: Five Thousand Five Hundred

Dry Service & 2 water or Chemical service) Contract for defect liability period as per tender items Ninty Eight only

and conditions with AC agency for defect liability period and copy of this contract will be submitted

before final bill. Agency has to quote rate accordingly. Agency has to also provide the fitness

certificate from system agency and submit to G.S.P.H.C.L. Agency has to submit FDR of approved

bank as per clause 2.0 of section -3, Rs.23166.00+ GST or quoted amount which ever is higher to

GSPHCL. for minimum maturity period of Four years in favour of GSPHCL., Which will be released

after successful completion of A.M.C. & at the completion of defect liability period. AC agency has

to provide four [04] servicse per year during defect liability period and one copy of necessary

service report duly singed by concern police officer and No Defect Certificate from police

department at the time of releasing Security Deposite will be submitted to EE (Ele.), GSPHCL.

Without above Service reports security Deposit of whole project will not be released. (Agency will

have to submit stability and performance certificate regarding AC system from authorized

dealer/OEM of AC at the time of final SD release). For delay in rectifing the fault penalty will be

deducted from agency S.D.For 1.7 to 2 ton capacity

165B For 2.0 Ton cassette Split AC machine.( One Way) 2.00 Each 8784.00 RS: Eight Thousand Seven Hundred

Eighty Four only

166 Air condationer copper tubing with minimum 19mm thick class O nitrile rubber insulation for 40.00 Mtr. 1147.00 RS: One Thousand One Hundred

entire piping system. Exposed refrigerant piping should be additionally insulated with factory Forty Seven only

laminatede 200GSM glass cloth for UV and mechnical protection and manufacturer recommended

adhesive ( Solvent-free) sealant appiled at all joints Uv- Protection layer. additional layer of UV

paint over GC for all exposed to atmosphere piping for weather protection of pipes & insulation

and prevention of rain water ingress. For Single phase/ Three Phase Split A.C. Machine/ Cassate

A.C Machine insulated pair of soft, copper tubing including power and control cable, 20/25/32

mm Dia. Rigid (ISI marked) UPVC drain pipe. Duly Insulated with 6 mm elastomeric nitrite rubber

up for Split AC machine up to 4 TR capacity

167 Carry out RCC Core cutting- up to 100 mm dia./300mm thick Wall/beam/slab with providing PVC 36.00 Each 1188.00 RS: One Thousand One Hundred

pipe of 3 mm thick inside and necessary finishing on both ends of wall. This item shall be executed Eighty Eight only

by civil agency as per requirement of Torrent power and electrical agency / Electrical Engineer of

GSPHCL. Civil agency has to take written permission from structure engineer/ Executive engineer

(civil) about diameter and location of core cutting before execute above item.

For that civil/ Electrical agency has to submit drawings regarding diameter and location of core

cutting and also mark the location of core cutting with dia. on slab/wall/beam.( For Electrical Work)

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

168 Shifting of Split A.C. The Scope includes dismantling, shifting, re-installing & re-commissioning of 8.00 Each 1950.00 RS: One Thousand Nine Hundred

the units including topping up of Refrigerant gas, minor civil work wiring existing piping M S Stand Fifty only

electrical cabling with PVC drown piping for 1.00, 1.5 & 2.0 TR capacity.

169 Supplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium volume 3.00 Sq. Mtr 10328.00 RS: Ten Thousand Three Hundred

control dampers complete as per specifications and size & shape as per site requirement and Twenty Eight only

approved design. ( Make:- Systemair / Caryaire / Cosmos / Trox / Airflow /

170 SITC of Microprocessor based Networkable Analogue Addressable Fire Alarm Control Panel. The 1.00 Nos 186300.00 RS: One lac Eighty Six Thousand Three

Panel shall be compliant with EN54-2, EN54-4 and approved by LPCB. The Fire Alarm Control Panel Hundred only

shall have inbuilt 2 loops and expandable capacity upto 8 loops. The Panel must have Full colour

800 x 480 LCD with resistive touch screen and automatic backlight dimming. Each loop shall have a

capacity of Minimum 120 analogue Addressable devices and Minimum 127 Base sounders/Base

Sounder Beacons. The panel shall have an event log of minimum 10,000 events @ 1 second

resolution, Filterable and Printable. The Panel shall have Three access levels. Panel shall support

upto 5000 Cause & Effects entries, with upto 20,000 inputs controlling & 20,000 Controlling

outputs across the network. The Panel shall have capability for Peer to Peer networking through

RS485 network card. The Panel must have 4 inbuilt programmable sounder circuits, each circuit

rated at 2.5A.The Panel must have inbuilt 3 programmable inputs and 5 inbuilt programmable

relay outputs. The Panel shall have up to sub-addressable 512 programmable Inputs/Outputs via

optional RS485 COMMS serially connected expansion cards. The Panel shall have 240 V AC power

supply along with automatic Battery Charger with 24 volts sealed maintenance free lead acid

batteries sufficient for 24 hours normal working and capable of operating the system for

minutes during emergency conditions . The Panel shall be fully expandable via common plug in

loop driver boards. The user shall have a choice of using the panel with 5.25 Amp or 10.25 Amp

power supply unit which is inbuilt in the FACP and should be approved to EN54-4. The Panel shall

have configurable via USB port to PC or memory stick. The Panel shall have dedicated RS232 serial

port for optional printer. Approved by LPCB ( Approved Make : Bosch, Siemens, Hochiki)

171 SITC of 2 loop card for fire alarm panel Approved by LPCB ( Approved Make : Bosch, Siemens, 1.00 Nos 55890.00 RS: Fifty Five Thousand Eight

Hochiki) Hundred Ninty only

172 SITC of Network module for fire alarm panel Approved by LPCB ( Approved Make : Bosch, 1.00 Nos 43470.00 RS: Forty Three Thousand Four

Siemens, Hochiki) Hundred Seventy only

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

173 SITC of Active Repeater Panel to be integrated with Fire Alarm Control Panel,larger display Full 1.00 Nos 80730.00 RS: Eighty Thousand Seven Hundred

colour 800 x 480 LCD with resistive touch screen and automatic back-light dimming and the status Thirty only

of any Fire/Fault of Integrated Fire Alarm Panels, Panel should compliant with EN54-2, EN54-4 and

Approved by LPCB ( Approved Make : Bosch, Siemens, Hochiki)

174 SITC of Analogue Addressable Smoke Sensor which is fully compatible with Analogue Addressable 266.00 Nos 3415.00 RS: Three Thousand Four Hundred

Protocol, having removable high performance chamber with Twin fire LED's allow 360 degree Fifteen only

viewing, User selectable sensitivity modes 1% to 4.5% obs/m, Incorporate Optical elements, lock

mechanism ( sensor to base), Electronically addressed, Pulsing/non-pulsing controlled from panel

including Sensor common mounting base. . Approved by LPCB. ( Approved Make : Bosch,

Siemens, Hochiki)

175 SITC of Analogue Addressable Multi- Heat Sensor which is fully compatible with Analogue 6.00 Nos 3167.00 RS: Three Thousand One Hundred

Addressable Protocol,having removable high performance chamber with Twin fire LED's allow 360 Sixty Seven only

degree veiwing, User selectable sensitivity modes 0 to 88 degree celsius, Incorporates Fixed

Temperature and Rate Of Rise Heat elements, lock mechanism ( sensor to base), Electronically

addressed, Pulsing/non-pulsing controlled from panel including Sensor common mounting base.

Approved by LPCB ( Approved Make : Bosch, Siemens, Hochiki)

176 SITC of Analogue Addressable Single Input Module. which Includes a single monitored input, flying 10.00 Nos 3974.00 RS: Three Thousand Nine Hundred

leads for easy installation. Electronically addressed, Approved by LPCB & Vds. ( Approved Make : Seventy Four only

Bosch, Siemens, Hochiki)

177 SITC of Analogue Addressable Single Output Module . which Includes a single output, flying leads 10.00 Nos 4347.00 RS: Four Thousand Three Hundred

for easy installation. Electronically addressed, Approved by LPCB & Vds. ( Approved Make : Bosch, Forty Seven only

Siemens, Hochiki)

178 SITC of Analogue Addressable Manual Call Point with Integral Short Circuit Isolator, Analogue 12.00 Nos 4347.00 RS: Four Thousand Three Hundred

Addressable Protocol having, Bi-coloured status LED (red for alarm, amber for (short-circuit), Non- Forty Seven only

frangible element fitted as standard (conforms to EN54), pulsing/non-pulsing can selectable via

panel, Electronically addressed, Approved by LPCB. ( Approved Make : Bosch, Siemens, Hochiki)

179 SITC of of Intelligent Loop Powered Wall Sounder Beacon, Variable Sound Output 90 ~ 102 dB(A) 12.00 Nos 6085.00 RS: Six Thousand Eighty Five

(±2 dB(A)) output at 1 metre, High Intensity LED technology, 51 User-Selectable Tones (all tones only

compatible). Approved by LPCB ( Approved Make : Bosch, Siemens, Hochiki)

180 SITC of Response Indicator - Dual LED (Metal square plate type) ( Approved Make : Bosch, 4.00 Nos 229.00 RS: Two Hundred Twenty Nine

Siemens, Hochiki) only

181 Providing and erecting FRLS-XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor 3705.00 Mtr. 180.00 RS: One Hundred Eighty only

for 1.1 KV. to be laid on wall/ slab with necessary G.I heavy duty cable clamps every 300 mm

distance of following size of cables.(A) 2 core 1.5 Sq. mm

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

182 Desiging,fabricating,testing at panel manufacuturer workshop and Providing & erecting at site 11.00 Sq.mtr 21500.00 RS: Twenty One Thousand Five

weather proof, dust & vermin proof, floor mounted front operated indoor type cubical panel board Hundred only

having IP-54 made from 2 mm. thick CRCA M.S. sheet for outer body,gland plate & doors, 1.6 mm.

thick CRCA M.S. sheet for internal partitions with necessary supporting angles, flats including

skirting, bending, drilling, welding, riveting with internal partitions & cable alley,rubber gromets,

rib, control wires, backelite control fuses as per requirements,sufficient nos. of hinges for doors,

door locking arrangement, rubber gasket complete with Required Nos. heavy Duty Connector with

Cadmium plated nut and bolt for Anti rusting and earthing Al.busbar, nuts/bolts,washer etc as per

instruction of engineer-In-Charge. Seperatly supplied item like switchgears, busbars and PVC FRLS

copper wire with suitable size for power interconnection,measuring instruments, foundation

flange-bolts-base plates. cost of C channel/angle iron stand (1ft to 2ft height as per cable size)shall

be excluded of panel fabrication.

The panel shall be supplied with nine Tank chemical process. which shall be carried out before

applying painting, painted with powder coating. (The rates excludes the cost of switchgears,

busbars, interconnecting mains & Copper / Aluminium strip, fuse, meters etc. The dimension shall

be measured excluding base beams.switchgear of approved brand and specification shall be used

and erected at CPRI approved panel manufacturers only. Busbar compartment must be separate

for easy termination of tails/cables and to avoid least distance of punching holes in busbar. Panel

depth shall be 350 mm.

Panel manufacturer have to give 4 years service support if in case of breakdown or fault. Panel

manufacturer have to submit electrical meter calibration report. Agency should design the panel in

such a way that there should not be any excess in panel area (sq.mtr) & length of bus-bar (mtr), if

any excess is need to be done agnecy has to draw attention to GSPHCL at the time of approval of

Loading and unloading of above item shall be done by hydra and skill work force under supervision

of electrical engineer and guidelines given by manufacturer to avoid damage to the item.

Size of door and Ele. room / Pump room shall be measure and provide to panel manufacturer to

prepare GA drawing considering the size of electrical room/pump room door and also inside size of

it. Agnecy has to co-ordinate with civil agency for giving proper dimenssion of electrical

room/pump room to accomodeted panel easily.[Including Necessary numbering / marking on

PANEL done with red colour radium sticker as per site requirement and instructions given by EIC on

site. Font / number size given by EIC on site as per requirement] (See attached details specification

of panel & manufacture also while quoting rate. [Manufacturer must be of Gujarat state so three

stage inspection can be done if required and service support]

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

183A Supplying and erecting tripple pole & neutral 440V / 500 V Panel mounting Copper Busbars with 14.00 Rmt 3171.00 RS: Three Thousand One Hundred

four equal Nos. of electrolyte bus having current density not more than 1.6 Amp. / sq.mm (Rated Seventy One only

current / cross section area) duly wraped with colour insulating tape for phase sequence of

following current carrying capacity, erected with necessary bus bar supports / insulators, main

cable socket to each bar, erected in existing cubical panel with necessary connections.For

electrolyte copper busbars For Suitable for 200 Amp. Capacity.

183B For Suitable for 300 Amp. Capacity 2.00 Rmt 4861.00 RS: Four Thousand Eight Hundred

183C For Suitable for 400 Amp. Capacity 2.00 Rmt 7247.00 RS: Seven Thousand Two Hundred

Forty Seven only

184 Providing and erecting Approved make Microprocessor Type Four pole moulded case circuit 2.00 Each 30797.55 RS: Thirty Thousand Seven Hundred

breaker having breaking capacity ICU of 35 KA. and above at 415 V . having normal current rating Ninty Seven and Paise Fifty Five only

250A. with variable thermal & magnetic release suitable to work on A.C.supply 50 Hz. with all

internal connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing

ICS=100% of ICU only

185 Providing and erecting Approved make Four pole moulded case circuit breaker having breaking 15.00 Each 6723.00 RS: Six Thousand Seven Hundred

capacity ICU of 25 KA. at 415 V,having normal current rating up to 25 A to 100A. with Fixed thermal Twenty Three only

& magnetic release suitable to work on A.C. supply 50 Hz. with all internal connections, spreader

tinned copper & complete erected in existing 16 G.M.S. housing.. ICS=100% of ICU only

186 Providing and erecting following additional parts for panel mounting MCCBs (A)Extended operating 17.00 Each 952.00 RS: Nine Hundred Fifty Two

rotary handle with pad lock with three position trip,off,on suitable for 25A to 250 A panel only

187 Providing and erecting multifunctional meter suitable for application of Power monitoring and 7.00 Nos. 13984.00 RS: Thirteen Thousand Nine

showing measurement of following Voltage, Frequency, Apparent energy, Apparent power, Active Hundred Eighty Four only

and reactive energy, Active and reactive power, Average voltage Vavg, Peak demand power PM,

QM, SM, Demand power P, Q, S, Apparent power S, S1, S2, S3, Unbalance current, Power factor

and displacement PF (signed, four quadrant), Calculated neutral current, Active, reactive, apparent

energy (signed, four quadrant), Active power P, P1, P2, P3, Voltage U21, U32, U13, V1, V2, V3,

Phase currents, Average current Iag, Peak demand currents, Reactive power Q, Q1, Q2, Q3,

Demand current I1, I2, I3, [Us] rated supply voltage 40...300 V AC 45...65 Hz, 40...300 V DC,

Network frequency 50 Hz, Type of network 3P, Display type 7 segments LED, Display colour Red,

Messages display capacity 3 fields of 4 characters, Display digits 12 digit(s) - 14.2 mm in height

188 Providing, erecting, testing and commissioning of L.T. Current Transformer with bus bar primary 21.00 Nos. 272.00 RS: Two Hundred Seventy Two

50/5 to 1000/5 ratio 15 VA burden having 1.0 Class Accuracy Duly secured with insulating materials only

connected to the meter.

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

189 Supplying and erecting approved make set of indicator lamps LED lamp, lense cover, bakelite 50.00 Nos. 43.00 RS: Forty Three only

holder complete erected with necessary connections.

190A Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA 6.00 Each 803.00 RS: Eight Hundred Three only

breaking capacity & confirms to IS :8828 in existing box having following capacity (a) 63 Amp FP.

190B 40 Amp FP. 55.00 Each 729.00 RS: Seven Hundred Twenty Nine

191 Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve) having 10.00 Each 359.00 RS: Three Hundred Fifty Nine

10 KA breaking capacity & confirms to IS : 8828 in existing box having following capacity (a) 40 only

192 Providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on 240 V 40.00 Each 122.00 RS: One Hundred Twenty Two

A.C. system and having breaking capacity 10 KA to be erected in existing box. confirming to IS only

8828/1996 with ISI Mark

193 Providing & erecting 415 V MCB Four pole switch for motor & Inductive Load (C curve) having 10 1.00 Each 1289.00 RS: One Thousand Two Hundred

KA breaking capacity & confirms to IS : 8828 with same company fabricated Sheets steel powder Eighty Nine only

coated enclosure minimum Size 8''X6' for incorporating Four nos. MCB with necessary

Numbering with oil paint by Painter. having following capacity: 63 Amp FP.

194 Providing & erecting 415 V MCB Four pole switch for motor & Inductive Load (C curve) having 10 1.00 Each 1215.00 RS: One Thousand Two Hundred

KA breaking capacity & confirms to IS : 8828 with same company fabricated Sheets steel powder Fifteen only

coated enclosure minimum Size 8''X6' for incorporating Four nos. MCB with necessary

Numbering with oil paint by Painter. having following capacity: 40 Amp FP.

195 Providing and erecting 240 volt MCB double pole switch for motor & Inductive(C Curve) having 10 1.00 Each 658.00 RS: Six Hundred Fifty Eight only

KA Breaking capacity and confirms to IS : 8828 with same company fabricated Sheets steel powder

coated enclosure Size 4''X6'' for incorporating Two nos. MCB. with earthing terminal having

following capacity. with necessary quarter Numbering with oil paint by Painter. (a) 40 Amp

196 Supply, Installation, Testing & Commissioning of Three Phase, 440 V Surge Suppressor protection 7.00 Each 6319.00 RS: Six Thousand Three Hundred

Device (SPD) & 40 Amp TPN MCB (or As per SPD OEM guide line for the protection of SPD which is Ninteen only

erected such a way that it can be operated easily) SPD must be capable to protect all electrical and

electronics equipments if SPD blast or fuse then the panel builder must have replace it soon during

defect liability period.The Detail Specification of SPD are As per Attached sheet with Annexture -

A(E). (Hakel,ikra,OBBO make) (With Four year Gaurantee/warranty)

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

197 Supplying and fixing radium sticker or Painting the number and words for inventory Identification 200.00 Each 22.00 RS: Twenty Two only

on erected fittings / equipment’s or Such accessories (MCBDB, Panel, Pole, Rack, Earthing, Pump,

Door etc.) as may required with good quality of enamelled paint or fade proof, weather proof,

waterproof high quality vinyl radium sticker for indoor / outdoor application as directed by

engineer in charge. For one character 50 mm height.

(The colour of sticker / paint should be as per instruction given by EIC as per site requirement) up

to 20 characters, up to 50 mm height.

198 Providing and erecting metalic danger notice board for MEDIUM VOLTAGE installation to be 10.00 Each 69.00 RS: Sixty Nine only

erected as per I.S.

199A Providing & erecting FRLS- XLPE (IS : 7098) (I)-88 ISI marked armoured Aluminium conductor cable 200.00 Mtr. 338.00 RS: Three Hundred Thirty Eight

for 1100 volt to be laid 90 cms. Under ground or to be laid on wall with 1.00 m.m thick G.I. heavy only

guage cable clamp or in existing DWC pipe underground or road crossing or floor. 3 1/2 core

Sq. mm ( 25 Sq.1/2 mm core)

199B 3 1/2 core 150 Sq. mm ( 70 Sq. mm 1/2 core) 50.00 Mtr. 868.00 RS: Eight Hundred Sixty Eight

200A Providing & fixing Double compressed heavy duty flange type brass cable gland with rubber ring 14.00 Each 75.00 RS: Seventy Five only

for P V C insulated armoured cable complete with outgoing tails, insulating tape etc. For following

size cables. .(a) 3 & 1/2 core 35/50 Sq. mm (Sigma, MCI, Comet, HMI Make Only)

200B 3 & 1/2 core 150 Sq. mm 4.00 Each 189.00 RS: One Hundred Eighty Nine

201A Providing & fixing Solderless crimping type Aluminium lugs conforming to IS suitable for cable of 14.00 Each 15.00 RS: Fifteen only

following size evenly crimped with high pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner. For 16/25 Sq.mm. Allumium Cable

201B 35/50 Sq.mm. 42.00 Each 20.00 RS: Twenty only

201C 70 Sq.mm. 3.00 Each 25.00 RS: Twenty Five only

201D 150 Sq.mm. 13.00 Each 61.00 RS: Sixty One only

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

202A Supplying and erecting approved make GRP/ FRP Ladder type Cable Tray Material – Corrosion 70.00 R.Mtr 493.00 RS: Four Hundred Ninty Three

Resistant Polyester Flame Retardant U.V. Stabilized Resin System - Manufactured from Pultruded only

Sections - Polyester Resin System, Glass Content : 55 – 60 % - Thickness- Rung Sq. Hollow Tube

25mm x 25mm - Fixing of Rung to Side Rail with Thermoplastic Pin & Epoxy Adhesive, Assembly

Single Stroke 3 Mtr. Length- Rung Spacing – 300mm - Length of Tray: 3000mm- Support Span –

2500mm, Deflection L/200 or < 10mm whichever is less - Specification Followed NEMA FG1 1993-

UV Resistant - Flame Retardant – IS 6746 - Appendix K/UL 94, Very Low Flammability - Oxygen

Index – Minimum 30% as per ASTM D

Flame Spread (Extent of Burning) – 20mm as per Standard ASTM D 635 - Tensile Strength – 4000 –

8000 Kg/Cm2 as per Standard ASTM D 638 - Flexural Strength – 2500 – 10000 Kg/Cm2 as per

Standard ASTM D 790- Izod Impact Strength – 130 Kg/Cm2 as per Standard ASTM D 256-

Compressive Strength – 2500 – 5000 Kg/Cm2 as per Standard ASTM D 695- Barcol Hardness – 50 –

(A) Width 150 mm, Side Member “C” Section : 75 x 25 x 25mm with 4mm Thickness, Loading

30Kg./Mtr. With Concentrated Load 70Kg. at center of the span

( Sumip,coromandak,Eircon,satyam-composite Make or equivalent make app by engineer in

charge subject to above specification)

202B Width 300 mm, Side Member “C” Section : 100 x 35 x 35mm with 4mm Thickness, Loading 225.00 R.Mtr 636.00 RS: Six Hundred Thirty Six only

60Kg./Mtr. With Concentrated Load 70Kg. at center of the span

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

203A Providing & Erecting 2.0 mtr long Earthing system by making minimum bore of 225 mm dia in soft 2.00 Each 7025.00 RS: Seven Thousand Twenty Five

soil. Suitable for doing pipe-in-pipe technology earthing.Earthing electric rod must be made from only

Corrosion free Hot dip galvanizing pipes having following specification.

(A) Earthing Electrode: outerpipe:- 88 mm minimum O.D., ISI 'B ' Class ISI mark of Reputed Brand,

Inner pipe:- 42 mm minimum O.D., Pipe B Class ISI mark reputed Brand Terminal Size: 70mm X

100mm length, Terminal Should be made from inner pipe for that pipe must be pressed and gave

rectangular shape so its work as a terminal.The hot deep galvanising must be done after above

process.Galvanised thickness must be minimum 75 micron any where. SS Nut bolt:- 2 no.with

washer suitable for 14mm dia. hole must be provided at terminal. total minimum Weight(approx.)

of earth electrodewith inside conductive material minimum should be 26 kg.

(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm/meter testing as per IEC 62561-2017,

Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%

(C) Back fill Compound:- Earthing compound should be capable to retain moisture for long time

Back Filling Compound weight is 25 Kg.

(D) Chamber and cover:- Earthing chamber should be size of 400 mm X 400 mm X 400 mm depth

and Cover should be heavy duty cast iron with required size of 300 mm X 300 mm X 4 mm thick.

Necessary test report must be submitted.

1. Short circuit test by ERDA/ CPRI for 25KA

2. Resistivity test of conducting material from NABL accredited lab.

3. Hot dip galvanised / zinc coating micro test from reputed laboratory.

4. General test report from OEM regarding specification of earthing.

[Make and model approved by EIC Strictly subject to item specification only] [OEM has to submit

all detail & sample for approved before supplying]

[Water must be poured in bore before starting earthing. Earthing value must be measured with

earth tester. Agency has to bring the earth resistance to at least 02 ohms & voltage between

neutral & Earthing upto 02 volt. Agency has to maintain earthing & its value for one year. Earthing

must be done in the presence of A.E. (GSPHCL)]

203B For above earthing additional charges for boring in hard rock soil (by breaker) & filling soft soil in 28.00 Each 325.00 RS: Three Hundred Twenty Five

earth pit (certificate for soil have to given by DEE / AE along with photographs) only

204A Providing & Erecting Mains with ISI marked, 1.1 KV grade electrolyte multi stranded, annealed 330.00 Mtr. 114.00 RS: One Hundred Fourteen

copper conductor with heat resistant PVC insulated conforms to IS:694, IEC - 227 erected in only

existing pipe of following size (Specifically for control panel, relays, power switchgears, motor

starters & control wiring) with required size of copper lugs, nuts and bolts if required. (a) One wire

204B One wire 50.00 sq. mm 15.00 Mtr. 583.00 RS: Five Hundred Eighty Three

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

205 Providing and erecting required size 85 micron HOT deep Galvanised iron strip with heavy duty 120.00 KG 77.00 RS: Seventy Seven only

PVC shrinkable insulationfor earthing of DG set Body , LT panel board, MCB DB, Cable Tray

Motors, etc. using Fiber Porcelain Red Earthing Strip Insulator. All fixing accessories such as Fiber

Porcelain Red Earthing Strip Insulator, brass screws rawl plugs etc., Jointing by rivetting and

welding for GI earthing. Test certificate must be submitted by agency.

206 SITC of All in one 136 inch Diagonal LED Active videowall, 1.5 mm pixel, Advanced COB LED 1.00 Nos 1889450.00 RS: Eighteen lac Eighty Nine Thousand

technology for superior stability and reduced pixel failure, High brightness up to ~800 nits with Four Hundred Fifty only

excellent color performance, 3840 Hz refresh rate for ultra-smooth, flicker-free visuals,170° wide

viewing angle for consistent image quality, Long lifespan of up to 100,000 hours, IP41 (front/rear)

IP20 protection for indoor reliability, Contract Ratio 10000:1 , Pixel Density 409600 or better , Ultra-

lightweight die-cast aluminium cabinet design, with videowall controller with interface 2xHDMI, 2x

audio outputs,1x SPDIF digital audio output, 1x 3.5-mm audio output, with MS Structure frame

designed fabrication and installation along with required brackets [Make: newline DVC 1.5 ] (OEM

Tender specific MAF & 3 years comprehensive warranty certificate to be provided along with bid

submission , OEM should have presence in India more than 8 Year, OEM should have service centre

in Ahmedabad/Gandhinagar - documents needs to be provided along with BID , OEM should have

toll free number for escalation & service ). (Make: Newline DVC1.5P / Christie / Barco & Model

Approved By EIC subject to Above Specification )

207 SITC of 65" Android Display. Screen size 164 cm, Aspect ratio 16:9, Resolution (3840 x 2160) UHD, 1.00 Nos 107617.00 RS: One lac Seven Thousand Six

Display area (H x V) 1428.48 x 803.52 mm, Brightness 400 nits, RF IN 1 x Side (ATV), AV IN 1 x Side Hundred Seventeen only

(mini with AV), (USB2.0 x 2) Side, HDMI 2.1, 3 x Side (HDMI2.1 only for ALLM), SPDIF Out Optical, RJ-

45 side, USB device support FAT16/FAT32/NTFS

(Read only), Picture format JPEG/PNG/BMP, Audio format MPEG1/2 Layer2/MPEG1/2/

2.5 Layer3/AC3(DD)/ EAC3(DD+)/HEAAC/AC4, Video format VP8/VP9/VC1/AV1/

H.263/H.264/HEVC/H.265/ MPEG1/2 /MPEG4, Audio output power (RMS) 10W+10W , Hotel

mode, CEC, Sound out (ARC), Dolby audio, HDR10, Bluetooth (TV), Internet link, Wifi type

(standard) 802.11 a/b/g/n/ac 2.4G+5G 2T2R, Build- in, CPU A53 x 4-1.5GHz, GPU Mali-G52MC1, OS

& version info Android OS 11.0(Google TV), Memory flash 16GB EMMC, RAM 2.0GB, Operating

voltage 110V-240V~ at 50/60Hz, Power consumption 200W.OEM MAF Complusory. (Make:

Panasonic LH-65AN9ND / Newline / Sony & Model Approved By EIC subject to Above

Specification )

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

208 SITC of 55" Android Display. Screen size 139.7 cm, Aspect ratio 16:9, Resolution (3840 x 2160) 3.00 Nos 67678.00 RS: Sixty Seven Thousand Six

UHD, Display area (H x V) 1095.84 x 616.41 mm, Brightness 400 nits, RF IN 1 x Side (ATV), AV IN 1 x Hundred Seventy Eight only

Side(mini with Adapter cable, 2 x Side(1 x USB 2.0, 1 x USB 3.0), HDMI 2.1, 3 x Side, with HSR

120Hz, SPDIF Out Optical, RJ-45 side, USB device support FAT16/FAT32/NTFS (Read only), Picture

format PNG/BMP/JPG, Audio format AC4/AC3/MP3/AAC/WMA , Video format

H.265/H.264/MPEG1/MPEG2/ MPEG4/XviD/VC1/AV1, Audio output power (RMS) 10W+10W

Hotel mode, CEC, Sound out (ARC), Dolby audio, HDR10, Bluetooth (TV), Internet link, Wifi type

(standard) 802.11 a/b/g/n/ac 2.4G+5G 2T2R, Build- in, CPU CA75 x 2 + CA55 x 2, GPU IMG BXE, OS

& version info Google TV Android 14 , Memory flash 16GB EMMC, RAM 2.0GB, Operating voltage

110V-240V~ at 50/60Hz, Power consumption 120W. OEM MAF Complusory. (Make: Panasonic LH-

55AN9ND / Newline / Sony Model Approved By EIC subject to Above Specification )

209 SITC of 43" Android Display. Screen size 108 cm, Aspect ratio 16:9, Resolution (3840 x 2160) UHD, 10.00 Nos 44286.00 RS: Forty Four Thousand Two

Display area (H x V) 941.184 x 529.416 mm, Brightness 400 nits, RF IN 1 x Side (ATV), AV IN 1 x Hundred Eighty Six only

Side(mini with Adapter cable, 2 x Side(1 x USB 2.0, 1 x USB 3.0), HDMI 2.1, 3 x Side, with HSR

120Hz, SPDIF Out Optical, RJ-45 side, USB device support FAT16/FAT32/NTFS (Read only), Picture

format PNG/BMP/JPG, Audio format AC4/AC3/MP3/AAC/WMA , Video format

H.265/H.264/MPEG1/MPEG2/ MPEG4/XviD/VC1/AV1, Audio output power (RMS) 10W+10W

Hotel mode, CEC, Sound out (ARC), Dolby audio, HDR10, Bluetooth (TV), Internet link, Wifi type

(standard) 802.11 a/b/g/n/ac 2.4G+5G 2T2R, Build- in, CPU CA75 x 2 + CA55 x 2, GPU IMG BXE, OS

& version info Google TV Android 14 , Memory flash 16GB EMMC, RAM 2.0GB, Operating voltage

110V-240V~ at 50/60Hz, Power consumption 95W. OEM MAF Complusory. (Make: Panasonic LH-

43AN9ND / Newline / Sony & Model Approved By EIC subject to Above Specification )

210 SITC of 5-Pin Wired Cardioid Condenser Boundary Microphone With Mute Switch And LED 17.00 Nos 56350.00 RS: Fifty Six Thousand Three

Indicator.ELEMENT: Fixed-charge back plate, permanently polarized condenser.Pick up Pattern: Hundred Fifty only

cardioid.Frequency Response: 70-15,000 Hz.Maximum Input Sound Level: 134 dB SPL.Open Circuit

Sensitivity: –37 dB.Output Connector: Integral 5-pin XLRM-type.Signal To Noise Ratio:

dB.Switches Touch-sensitive control: on/mute.Dynamic Range: 110 dB. Phantom Power

Requirements: 11-52V DC, 6.8 mA. OEM MAF Complusory. (Make: Audio Technica ES947C/FM5 /

Audix / clock Audio & Model Approved By EIC subject to Above Specification )

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

211 SITC of 8 x 16 HDMI Switcher with 8 HDMI input and 8 HDMI + 8 HDBaseT output allowing the 1.00 Nos 465855.00 RS: Four lac Sixty Five Thousand Eight

connection of 8 HDMI sources to up to 16 displays.Video resolutions up to 4K@60Hz (YUV 4:4:4) Hundred Fifty Five only

on all HDMI & CAT ports. HDMI 2.0b and HDCP 2.2/1.x compliant. HDMI ports support 18Gbps

lossless compressed video bandwidth. HDR, HDR10, HDR10+, Dolby Vision & HLG. HDbaseT output

can extend the transmission distance up to 230ft/70m via a single CAT6 cable. Advanced EDID

management and CEC control. One-way IR matrix function. Control via front panel buttons, IR

remote, RS-232, LAN and Web GUI. Swticher should be supplied with 8nos of compitible receiver.

OEM MAF Complusory. (Make: DVDO DVDO Matrix 88-CAT / Extron / Lightware & Model

Approved By EIC subject to Above Specification )

212 SITC of Customized Pop-up Box with, USB, HDMI, Power. [Customized as per actual] 2.00 Nos 7500.00 RS: Seven Thousand Five Hundred

213 SITC of Dual Screen Wireless Conferencing Solution. HDMI Output 1x HDMI 2.0, 1x HDMI 1.4, Sub 1.00 Nos 260733.00 RS: Two lac Sixty Thousand Seven

output Resolution HDMI1.4/HDMI2.0, HDCP HDCP 1.4 HDMI Input 1x HDMI 19-pin female Hundred Thirty Three only

connector Format Compliance HDMI1.4 CEC Support analog audio Output Yes, 3.5mmjack LAN port

RJ45 x2 1000Mbps USB interface USB-A 3.0 x3, USB-B 3.0x1, Type-C(USB3.0) x1, USB 2.0 x3, Type-

C(USB2.0) x1 USB Camera over wifi ≤1080P@30, MJPG, Audio output jack, HDMI, jack + HDMI, USB

Speaker Control connectors 3 pin Phoenix terminal/ RS232 interfaceVideo Playback Frame Rate 20-

60 FPS Latency 80~120ms. (Make: WirelessMedia WU-20 / Barco/ Crestron & Model Approved

By EIC subject to Above Specification )

214 SITC of 4 x 4 USB 3.2 Gen 1 Industrial Sharing Switch.Enables four computers to share USB 1.00 Nos 48001.00 RS: Forty Eight Thousand One

peripheral up to four devices .USB 3.2 Gen 1 compatibility with maximum data transfer rates up to only

5 Gbps. Displays port focus via LED indicators.Computer Connec ons4

Computer4 x USB Type B Female (Blue)

Device4 x USB Type A Female (Blue)

Serial1 x 5-pin Terminal Plug (Green)

Power1 x 2-pin 9-24V Terminal Plug (Green)

Power (Op onal)1 x 12V DC Jack Female (Black)

Power Consump onDC12V:0.376W:117BTU/h

DC24V:0.48W:117BTU/h. (Make: Aten US3344i / Kramer / Extron & Model Approved By EIC

subject to Above Specification )

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

215 SITC of 20X PTZ auto tracking camera. The camera should be enabled with Wide View Angle with 2.00 Nos 307010.00 RS: Three lac Seven Thousand Ten

IP Streaming.It should have minimum 20x Optical Zoom that Delivers Smooth Pan, Tilt, and Zoom- only

in Performance.The camera must have a built-in tally light.It should be capable of Production

Quality Full HD Video Output up to 1080/60p via HDMI, USB3.0 and IP Transmission.It should have

Low noise CMOS sensor which effectively ensures high SNR of camera video.It should have Image

Sensor - 1/2.8” progressive CMOS 1920x1080 or better.It should have Video Compression -

H.264.It should have Max. Resolution - 1920x1080 @ 60fps (IP Streaming) 1920x1080 @ 60fps

(HDMI/USB 3.0).It should have Video Output Port - HDMI, USB 3.0, RJ-45 (IP Streaming).It should

have View Angle – 55.8° (wide) ~ 3.2° (tele).It should allow Control Protocol - VISCA / PELCO-D /

PELCO-P.It should allow Pan/Tilt Rotation - -170°~+170°, -30°~+90°.It should have minimum Preset

Positions – 255 or higher.It should have Control Port – RS232. OEM MAF Complusory. (Make:

DVDO C4 / Panasonic / Sony & Model Approved By EIC subject to Above Specification )

216 SITC of Conference room Hub. The Conference Room Hub Shall Work with PC based web- 1.00 Nos 355983.00 RS: Three lac Fifty Five Thousand Nine

basedconferencing solutions, including Microsoft Skype for Business/Microsoft Teams, Zoom, Hundred Eighty Three only

Google Hangouts™/Google Meet, and many more. The Conference Room Hub shall Supports both

Windows and Mac PCs, and uses standard audio drivers. Auto Setup validates device connections,

adjusts room levels, and sets speaker EQ to optimize audio quality. The Conference Room Hub

shall have Speaker connectivity options include HDMI audio, a built-in 20W amplifier, or RCA line

out. The Conference Room Hub shall utilize an Ethernet network via an RJ-45 connector for

software configuration and control. The Conference Room Hub shall be CE marked, UL listed, and

shall be compliant with the RoHS directive.with 3 years warranty. OEM MAF Complusory.. [Make:-

Biamp Devio SCR /CR , Symetrix , Extron & Model Approved By EIC subject to Above Specification

217 SITC of The tabletop microphone. tabletop microphone shall utilize network via an RJ-45 2.00 Nos 167788.00 RS: One lac Sixty Seven Thousand

connector for audio networking as well as software configuration and control. Tabletop Seven Hundred Eighty Eight only

microphone shall contain eight-element microphones, and shall provide three 120-degree zones

for 360 degrees of coverage. Tabletop microphone shall offer multidirectional beamforming and

automatic signal tracking capabilities.Tabletop microphone shall include three capacitive-touch

buttons for changing mute state, and shall support single-cable installation and tabletop mounting.

The Beamtracking tabletop microphone shall provide a second RJ-45 connector to allow an

additional tabletop microphone to be daisy-chained together. Tabletop microphone shall be CE

marked, UL listed, and compliant with the RoHS directive.with 4 years warranty.OEM MAF

Complusory.. [Make:- Biamp Devio DTM-1 / Cisco / Extron & Model Approved By EIC subject to

Above Specification ]

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

218 SITC of 5.25-inch Two-Way Surface Mount Loudspeaker; compact bass reflex design with 5.25-inch 2.00 Nos 30799.00 RS: Thirty Thousand Seven Hundred

coated paper woofer and 1-inch soft dome tweeter; switchable operation for 8-ohm low Ninty Nine only

impedance; frequency response (-10dB) 94Hz to 20kHz; nominal sensitivity 87dB (1W/1m);

maximum continuous SPL 104dB (110dB peak); features K-Mount bracket for 140-degree vertical

or horizontal adjustment; magnetically attached end caps to conceal wiring and hardware; IP40

rated.OEM MAF Complusory. [Make :- Biamp-KUBO 5-BL/ Bose /Fohhn Audio & Model

Approved By EIC subject to Above Specification ]

219 SITC of 6.5" 2-way Passive Ceilling speaker. RMS Power : 60W or better.Impedance : 8 Ω or better. 8.00 Nos. 23552.00 RS: Twenty Three Thousand Five

woofer cone material: polypropylene.Maximum SPL : RMS - 104dB or better Dispersion: 180, Hundred Fifty Two only

Frequency Range : 60 Hz – 20 KHz or better.OEM MAF Complusory. (Make:Biamp CM20DT / Fohhn

Audio / Bose & Model Approved By EIC subject to Above Specification)

220 SITC of Fixed I/O DSP with 10 analog inputs (All AEC) , 8 analog outputs, configurable USB audio 3.00 Nos 340736.00 RS: Three lac Forty Thousand Seven

channels.. Dynamic range / S/N ratio 110 dB or higher Signal processing via intuitive software Hundred Thirty Six only

allows configuration and control for signal routing, mixing, equalization, filtering, delay and much

more. Frequency Response: 20Hz-20Khz. Network port: RJ-45 x 1, Dante Primary/Secondary,

Network port: RJ-45 x 2.Each input channel is equipped with phase inversion, low-cut filter and a

four-band parametric EQ. ten Acoustic Echo Cancellation (AEC) processors, ten compressors/de-

essers and eight feedback suppressors can be freely assigned to any of the input or output

channels to ensure maximum audio quality at all times. OEM MAF Complusory. (Make: Audio

Technica ATDM1012 / Biamp / Symetrix & Model Approved By EIC subject to Above Specification)

221 SITC of UHF Wireless Cardioid dynamic handheld microphone system with Frequency Response of 1.00 Nos 56000.00 RS: Fifty Six Thousand only

100 Hz to 15 kHz (+1 dB, -3 dB), RF Sensitivity 20 dBuV at 60 dBA S/N ratio (50Ω termination), Total

Harmonic Distortion <1.0% (at 1 kHz, ±20 kHz deviation) , Dynamic Range > 110dB , on/off switch

operating range 100 mtrs , RF Power Output High: 30 mW, Low: 10 mW (switchable) at 50 Ω

Multiple band with 8 channels on each band ; maximum Output level XLR / Balanced: +9 dBV &

mm (¼"") / Unbalanced: +4 dBV. Operating Range: 100m. OEM MAF Complusory. (Make: Audio

technica ATW2120C / Audix / clock Audio & Model Approved By EIC subject to Above

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

222 SITC of 4 Channel 300W Class D Amplifier. Amplifier should support Flexible power sharing per 2.00 Nos. 172000.00 RS: One lac Seventy Two Thousand

channel. Amplifier should support both 70/100V & 8/4 ohms operation. Amplifier should have only

THD<0.008% or better, SNR> 103dBa or better, input impedance: plus minus4 dBu or better.

Amplifier should have inbuilt speaker EQ, highpass/ Low pass filter. Amplifier should be CE marked,

UL listed and RuHS complaints. OEM MAF Complusory. [Make :- Biamp Voltera A300.4 /

Bose/D&B & Model Approved By EIC subject to Above Specification ]

223 Supply, Installation Testing & Commissioning 3ft , high-performance, HDMI cable.It supports 22.00 Nos 2589.00 RS: Two Thousand Five Hundred

signals up to 4K@60Hz (4:4:4), Deep Color, x.v.Color™, Lip Sync, 7.1 PCM, Dolby TrueHD, DTS- Eighty Nine only

HD, CEC., 24K gold–plated connectors resist corrosion, Provides 15lbs of restraining force for a

non–slip connection. [Make: Black I / Linetek / Kramer & Model Approved By EIC subject to

Above Specification]

224 Supply, Installation Testing & Commissioning 10 Mtr. , high-performance, HDMI cable.It 1.00 Nos 8806.00 RS: Eight Thousand Eight Hundred

supports signals up to 4K@60Hz (4:4:4), Deep Color, x.v.Color™, Lip Sync, 7.1 PCM, Dolby Six only

TrueHD, DTS-HD, CEC., 24K gold–plated connectors resist corrosion, Provides 15lbs of restraining

force for a non–slip connection. [Make: Black I / Linetek / Kramer & Model Approved By EIC

subject to Above Specification]

225 Supply, Installation Testing & Commissioning 15 Mtr. , high-performance, HDMI cable.It 3.00 Nos 11835.00 RS: Eleven Thousand Eight Hundred

supports signals up to 4K@60Hz (4:4:4), Deep Color, x.v.Color™, Lip Sync, 7.1 PCM, Dolby Thirty Five only

TrueHD, DTS-HD, CEC., 24K gold–plated connectors resist corrosion, Provides 15lbs of restraining

force for a non–slip connection. [Make: Black I / Linetek / Kramer & Model Approved By EIC

subject to Above Specification]

226 Supply, Installation Testing & Commissioning 20 Mtr. , high-performance, HDMI cable.It 1.00 Nos 15022.00 RS: Fifteen Thousand Twenty Two

supports signals up to 4K@60Hz (4:4:4), Deep Color, x.v.Color™, Lip Sync, 7.1 PCM, Dolby only

TrueHD, DTS-HD, CEC., 24K gold–plated connectors resist corrosion, Provides 15lbs of restraining

force for a non–slip connection. [Make: Black I / Linetek / Kramer & Model Approved By EIC

subject to Above Specification]

227 Supply, Installation Testing & Commissioning 25 Mtr. , high-performance, HDMI cable.It 1.00 Nos 18130.00 RS: Eighteen Thousand One

supports signals up to 4K@60Hz (4:4:4), Deep Color, x.v.Color™, Lip Sync, 7.1 PCM, Dolby Hundred Thirty only

TrueHD, DTS-HD, CEC., 24K gold–plated connectors resist corrosion, Provides 15lbs of restraining

force for a non–slip connection. [Make: Black I / Linetek / Kramer& Model Approved By EIC

subject to Above Specification ]

228 SITC of 10-meter Active USB 3.0 (SuperSpeed) Signal Extension/Repeater Cable; must support 1.00 Nos 12190.00 RS: Twelve Thousand One Hundred

uncompressed data transfer rates up to 5Gbps; features integrated active electronics or hybrid Ninty only

fiber-optic/copper architecture for signal support for auxiliary DC power input (5V/2A) to ensure

stable current delivery gold-plated USB Type-A (Male) to USB Type-A (Female) [Make: Black I /

Linetek / Kramer & Model Approved By EIC subject to Above Specification]

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

229 SITC of 15-meter Active USB 3.0 (SuperSpeed) Signal Extension/Repeater Cable; must support 4.00 Nos 17094.00 RS: Seventeen Thousand Ninty

uncompressed data transfer rates up to 5Gbps; features integrated active electronics or hybrid Four only

fiber-optic/copper architecture for signal support for auxiliary DC power input (5V/2A) to ensure

stable current delivery gold-plated USB Type-A (Male) to USB Type-A (Female) [Make: Black I /

Linetek / Kramer & Model Approved By EIC subject to Above Specification]

230 SITC of 25-meter Active USB 3.0 (SuperSpeed) Signal Extension/Repeater Cable; must support 1.00 Nos 20202.00 RS: Twenty Thousand Two Hundred

uncompressed data transfer rates up to 5Gbps; features integrated active electronics or hybrid Two only

fiber-optic/copper architecture for signal support for auxiliary DC power input (5V/2A) to ensure

stable current delivery gold-plated USB Type-A (Male) to USB Type-A (Female) [Make: Black I /

Linetek / Kramer & Model Approved By EIC subject to Above Specification ]

231 SITC of Speaker Cable. CONDUCTORS Material: Bare Copper Size: 2x16 AWG (26/30) Diameter: 300.00 MTR 135.00 RS: One Hundred Thirty Five

INSULATION Material: PVC Diameter: 2.0±0.09 mm Average Thickness: 0.261mm Color: Color

coded — Black & red JACKET Material: PVC Diameter: 5.6 ± 0.19mm Color: White

ELECTRICAL Temperature Rating: 75˚C Insulation Resistance: DC–500V 10MΩ/KM MIN. at 20℃

Conductor Resistance: 16AWG–13.7Ω/KM MAX. at 20℃. [Make: Kramer / Belden / Norstone &

Model Approved By EIC subject to Above Specification]

232 SITC of Microphone Cable. CONDUCTORS Material: Tinned Copper Size: 2x20AWG Diameter: 600.00 MTR 140.00 RS: One Hundred Forty only

INSULATION Material: PP Diameter: 1.8±0.09mm Average Thickness: 0.442mm Color: As color code

DRAIN WIRE Size: 20AWG Material: Tinned Copper SCREENING Material: AL–foil/mylar Overlap:

JACKET Material: PVC Diameter: 5.4 ± 0.19mm Color: Black

ELECTRICAL Temperature rating: 75˚C Insulation resistance: DC–500V 100MΩ/KM MIN. at 20℃

Conductor resistance: 20AWG–34.6Ω/KM MAX. at 20℃ Impedance: 40~100Ω. [Make: Kramer /

Belden / MX & Model Approved By EIC subject to Above Specification ]

Sr No. Item Description Unit Rate Rate in Words Total Amount

Sr No. Item Description Unit Rate Rate in Words Total Amount

233 SITC of 17 U Equipment steel rack Floor mounting for installing Amplifier, Scalar, Wireless mic 1.00 Nos 19500.00 RS: Ninteen Thousand Five Hundred

receiver etc, rack should be fully enclosed steel housing fabricating with 14 SWG Sheet and powder only

coated with glass doors and having wire nos. wire management system . the rate includes the

exhaust fan 2 nos, 6 Sockets and 1 switch power strip and all the wiring in the rack.. (Make:- APW

president/ APC / Rittal/ Valrack )

TOTAL ELECTRICAL AMOUNT

TOTAL CIVIL + ELECTRICAL AMOUNT

Asst. Engineer Dy. Exe. Engineer Exe. Engineer

Gandhinagar Gandhinagar Gandhinagar