EE TW Paderu

Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, seigniorage charges, labour charges such as shoring ,sheeting, planking, strutting, dewatering etc. complete for finished item of work as per SS - 20 B (APSS 308). for Building Foundation

Earth work excavation and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, seigniorage charges, labour charges such as shoring ,sheeting, planking, strutting, dewatering etc. complete for finished item of work as per SS - 20 B (APSS 308). for curtain walls

Filling with Gravel in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including all operational, incidental, labour charges, seignorage charges, hire charges of T & P etc., complete for finished item of work. APSS No.309 & 310

Plain Cement Concrete (1:4:8) proportion (cement: fine aggregate: Coarse aggregate) using 40mm size Hard Broken Granite (IS383, 1970) machine crushed metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, mixing concrete in concrete mixer including seigniorage charges, sales & other taxes on all materials, all operational, incidental, and labour charges such as laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work (APSS No. 402) for Levelling Course and Flooring Bed

Vibrated Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 350Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for Column Footings.

Vibrated Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 350Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for Pedastals.

Vibrated Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 350Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for Columns.

Filling with usefull available excavated earth work(including rocks ) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including all operational, incidental, labour charges, seignorage charges, hire charges of T & P etc., complete for finished item of work. APSS No.309 & 310

Random Rubble stone masonry in CM (1:6) prop (Cement:sand) using Granite stone from approved quarry including cost and conveyance all materials like granite stones,cement,sand ,water etc.,to site including seigniorage charges, sales and other taxes on all materials ,all operational, all incidental and labour charge such as cutting stones to required size and shape,mixing and cement mortar, constructing masonry , curing etc., complete for finished item of work fpr foundation and basement (APSS No. 601&615)

Vibrated Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for PLINTH BEAM

Vibrated Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for Beams

Vibrated Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for Slab of 115mm thick

Providing impervious coat to exposed RCC roof slab surface with CM(1:3)12mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work.

Brick Masonry in superstructure with CM (1:8) prop with Flyash Cement solid blocks of size 290x200x140 cms from manufacturing of flyash solid block using flyash of 80kgs, cement of 15kgs. Gypsum of 5 Kgs. and stone dust with a compresive strenght not lessthan 50 kg/sqm including cost and conveyance of all materials, labour charges, seiniorage charges, scaffolding.

Brick Masonry in superstructure with CM (1:8) prop with Flyash Cement solid blocks of size 290x200x140 cms from manufacturing of flyash solid block using flyash of 80kgs, cement of 15kgs. Gypsum of 5 Kgs. and stone dust with a compresive strenght not lessthan 50 kg/sqm including cost and conveyance of all materials, labour charges, seiniorage charges, scaffolding.

Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, curing etc. complete for Lintels

Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, curing etc. complete for Sunshades / Chajjas for 75mm thick at Fixed end and 50mm thick at Free end and for a width of 0.60 Mts. etc complete for finished item of work Sunshade.

Ceiling plastering with CM (1:3) Prop 12mm thick single coat spong finish including cost and conveyance of all materials like cement, sand, water etc., to site, including sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing,complete for finished item of work.(SS 901,906)

Plastering to even surfaces of walls with CM (1:5) Prop 12mm thick in single coat including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing mortar,finishing, curing etc., complete for finished item of work. (APSS 901,906 )

Plastering 20mm thick in two in two coats with base cost of 16mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) dubara sponge finish including and conveyance of all materials like cement, screened sand, water etc., to site, seigniorage charges, sales & other taxes on all materials, all operational including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing mortar,finishing, curing etc., for Uneven Surfaces of Brick wall complete for finished item of work. (APSS 901,906 )

Plastering to even surfaces of walls with CM (1:5) Prop 20mm thick in single coat including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing mortar,finishing, curing etc., complete for finished item of work. (APSS 901,906 )

Supply and fixing of M.S.plain sheet door of size 40x40x6mm angular for frame of 1no horizontal,2nos and 12 mm square bar at bottom to connect the verticles of the frame and shutters of size 0.52x2.05m -2nos., each made with 35x35x4mm angular alround,25x4mm flat for horizontals 2nos.@ front side, 4nos. @ rear side and supported with 20 gauge M.S.plain sheet,0.30m length aldrops-2nos., each made with 16mm dia M.S.bar of 0.30m length -1no.,20x4 mm flat 0.08m length for rings of 3nos.,0.15m length for supporting, 8mm square bar of (0.30+0.10)m length for locking arrangements, tower bolts 0.20 m length -2nos., each made with 12mm dia M.S.bar of 0.23m length-1 no.,,20x4 mm flat 0.06m length for rings of 2nos.,(0.20+0.04+0.04)m length for supporting, 6mm M.S.bar of 0.06m length for rings-1no.,0.05m length crank bolts- 6 nos., each made with 12mm dia M.S.bar of 0.05m length-1no.,20x4mm flat 0.12m length-2nos.,40x40x6mm angle of 0.25m length each of 6nos.,for holdfasts including red oxide painting including red oxide painting including all etc., complete for size 1.20x2.10m.

Supply and fixing of M.S.plain sheet door of size 40x40x6mm angular for frame of 1no horizontal,2nos and 12 mm square bar at bottom to connect the verticles of the frame and shutters of size 0.52x2.05m -2nos., each made with 35x35x4mm angular alround,25x4mm flat for horizontals 2nos.@ front side, 4nos. @ rear side and supported with 20 gauge M.S.plain sheet,0.30m length aldrops-2nos., each made with 16mm dia M.S.bar of 0.30m length -1no.,20x4 mm flat 0.08m length for rings of 3nos.,0.15m length for supporting, 8mm square bar of (0.30+0.10)m length for locking arrangements, tower bolts 0.20 m length -2nos., each made with 12mm dia M.S.bar of 0.23m length-1 no.,,20x4 mm flat 0.06m length for rings of 2nos.,(0.20+0.04+0.04)m length for supporting, 6mm M.S.bar of 0.06m length for rings-1no.,0.05m length crank bolts- 6 nos., each made with 12mm dia M.S.bar of 0.05m length-1no.,20x4mm flat 0.12m length-2nos.,40x40x6mm angle of 0.25m length each of 6nos.,for holdfasts including red oxide painting including red oxide painting including all etc., complete for Door size 1.05x2.10 MTS.

Supply and fixing of M.S.plain sheet window using 40x40x6mm T-angular alround, centre veticles 1 no., 10mm square bars of 0.90m length each at 150mm centre to centre and shutter of size 0.43x1. 18m -2nos., each made with 25x25x4mm angular alround, 20x4mm flat for horizontals-2nos. @ rear side and supported with 20 gauge M.S.plain sheet, 100mm long M.S.tower bolts - 4nos., 100mm long M.S.plain butthinges -4nos., 20x4mm flat of 0.20m lenght 2nos., for handles, 40x40x6mm angle for hold fasts of 4 nos., of 0.25 lenght each including red oxide painting etc., complete for size 0.90x1.20m.

Supply and fixing of M.S.plain sheet window using 40x40x6mm T-angular alround, centre veticles 1 no., 10mm square bars of 0.90m length each at 150mm centre to centre and shutter of size 0.43x1. 18m -2nos., each made with 25x25x4mm angular alround, 20x4mm flat for horizontals-2nos. @ rear side and supported with 20 gauge M.S.plain sheet, 100mm long M.S.tower bolts - 4nos., 100mm long M.S.plain butthinges -4nos., 20x4mm flat of 0.20m lenght 2nos., for handles, 40x40x6mm angle for hold fasts of 4 nos., of 0.25 lenght each including red oxide painting etc., complete for size 1.52x1.22m.

Flooring with ceramic tiles 7.3mm thick of 1st quality all shades of makes Jhonson & Jhonson, Kajaria, Nitco and Marbonite, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work.

Skirting with ceramic tiles 7.3mm thick of 1st quality all shades of makes Jhonson & Jhonson, Kajaria, Nitco and Marbonite, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work.

Providing walls with white cement two coats using approved brand to give an even shade after thoroughly brushing the surface to remove dirt including cost and conveyance of all materials curing and labour scaffolding,curring and lift charges etc. includinb SURYA CEM

Providing walls with white cement two coats using approved brand to give an even shade after thoroughly brushing the surface to remove dirt including cost and conveyance of all materials curing and labour scaffolding,curring and lift charges etc. includinb SURYA CEM

Painting of two coats of ready mixed synthatic enamel paint 1st grade of approved make and shade to new iron work existing one coat of redoxide primary including cost and conveyance of all materials to site cost of primary cost and labour charges etc.

Providing High Yield Strength Deformed (HYSD) steel bars (Fe 415 grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lapsplicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, laour charges such as cutting, bending placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors. (APSS No.126)

SUB-ESTIMATE (ELECTRICAL ESTIMATE)

Supply and fixing of ISI mark 25mm dia 2.20mm thick PVC conduit pipe Sudhakar / Macoplast / Modi make concealed in roof slab with all required acessories including No.14 SWG GI wire for earth continuity including chiseling the wall wherever necessary, including necessary masonery work for light/fan point and seperate plug point with teak wood deep box including cost and conveyance of all materials to site and labour charges, sales tax etc., complete for finished item of work. (SSR 2012-13, item No.1.4.2)

Supply and fixing of ISI mark 25mm dia 2.20mm thick PVC conduit pipe Sudhakar / Macoplast / Modi make concealed in roof slab with all required acessories including No.14 SWG GI wire for earth continuity including chiseling the wall wherever necessary, including necessary masonery work for light/fan point and seperate plug point with teak wood deep box including cost and conveyance of all materials to site and labour charges, sales tax etc., complete for finished item of work. (SSR 2012-13, item No.1.4.2)

Supplying and wiring with 2 runs of 14/0.3m (1.00 Sq.mm) FRLS / HFFR P.V.C. insulated ISI Copper Cable GM/L&T/RPG/Havells/V-Guard/Power Flex/Polycab/Gold Medal/ Standard /Milion / Vimal/ Suncab/ Paragaon / FortuneArt make in the existing metallic / non-metallic conduct pipe with 6A 1 Way flush type switch, Ceiling rose and 3mm thick hylam sheet covering to switch control box including cost and conveyance of all materials to site, labour charges and sales tax etc. complete for finished item of work for light, bell, fan and exhaust fan points in Non-Residential Buildings (SSR-2012-13, item No.2.1.1)

Supply and fixing of 6A 3/2 pin flush type socket with 6A switch control of Anchor / Gold medal olive / Million zoom make with ISI mark on a common switch board with earth continuity including wire leads, earth connections including cost and conveyance of all materials to site, labour charges and sales tax etc. complete for finished item of work

Supply and run 2 of 36/0.3mm (2.5 Sqmm) PVC isulated flexible copper cable of make Standard/Havells/HPL/Toyoma in existing PVC conduit pipe circuits, MV Lamp/Security light points including labour charges (Phase Neutral and earth) and run of 1 of 1.0 sqmm copper cable for earthing.

Supply and fixing Distributin board with 20A single phase plug and Socket, in sheet steel enclosure with 10/16/20A SP MCB including internal connection and labour chages for surface / flush mounting etc., complete Make: L&T/LEGRAND/GE/Siemens/Schneider.

Providing independent earthing for main switches integrated circuit cutouts and moters with 40mm dia Medium grade GI Pipe of TATA/Zenith/GST make of 2.5 m length duly providing 12mm dia 16 Nos. holes and rewired bolts, nuts and washers, checknuts, Humepipe ring 18 inches dia, 2 inch thick etc., as per IS specifications with necessary double GI earth wire NO. 8 SWG inclkuding filling with equal preparation of salt and charcoal in layers including cost and conveyance of all materials to site, labour charges and sales tax etc., complete for finished item of work.

Supply and Run of 2 of 6 Sq.mm (7/18) WPSC ISI Aluminium wire of makes Finolex / GM/ million /Payal/ V-Guard/ Nakoda / Gold Medal / HPL/RPG/ Nandicab along with No.10 SWG G.I bearer wire through PVC cleats with all accessories including cost and conveyance of all materials to site, labour charges and sales tax etc., complete for finished item of work.

No of items 38 (Thirty eight) only

Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, seigniorage charges, labour charges such as shoring ,sheeting, planking, strutting, dewatering etc. complete for finished item of work as per SS - 20 B (APSS 308). for Building Foundation

Earth work excavation and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, seigniorage charges, labour charges such as shoring ,sheeting, planking, strutting, dewatering etc. complete for finished item of work as per SS - 20 B (APSS 308). for Building Foundation.

Filling with Gravel in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including all operational, incidental, labour charges, seignorage charges, hire charges of T & P etc., complete for finished item of work. APSS No.309 & 310

Plain Cement Concrete (1:4:8) proportion (cement: fine aggregate: Coarse aggregate) using 40mm size Hard Broken Granite (IS383, 1970) machine crushed metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, mixing concrete in concrete mixer including seigniorage charges, sales & other taxes on all materials, all operational, incidental, and labour charges such as laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work (APSS No. 402) for Levelling Course and Flooring Bed

Vibrated Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 350Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for Column Footings.

Vibrated Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 350Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for Pedastals.

Vibrated Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 350Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for Columns.

Filling with usefull available excavated earth work(including rocks ) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including all operational, incidental, labour charges, seignorage charges, hire charges of T & P etc., complete for finished item of work. APSS No.309 & 310

Random Rubble stone masonry in CM (1:8) prop (Cement:sand) using Granite stone from approved quarry including cost and conveyance all materials like granite stones,cement,sand ,water etc.,to site including seigniorage charges, sales and other taxes on all materials ,all operational, all incidental and labour charge such as cutting stones to required size and shape,mixing and cement mortar, constructing masonry , curing etc., complete for finished item of work fpr foundation and basement (APSS No. 601&615)

Vibrated Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for PLINTH BEAM

Vibrated Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 350Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for Beams

Vibrated Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 350Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for Slab of 115mm thick

Providing impervious coat to exposed RCC roof slab surface with CM(1:3)12mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work.

Brick Masonry in superstructure with CM (1:8) prop with Flyash Cement solid blocks of size 290x200x140 cms from approved source having minimum crushing strength of 50 kg/sqm including cost and conveyance of all materials, labour charges, seiniorage charges, scaffolding and curing etc., Complete for finished item of work.

Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, curing etc. complete for Lintels

Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, curing etc. complete for Sunshades / Chajjas for 75mm thick at Fixed end and 50mm thick at Free end and for a width of 0.60 Mts. etc complete for finished item of work Sunshade.

Ceiling plastering with CM (1:3) Prop 12mm thick single coat spong finish including cost and conveyance of all materials like cement, sand, water etc., to site, including sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing,complete for finished item of work.(SS 901,906)

Plastering 12mm thick in Single coat with CM (1:5) dubara sponge finish including cost conveyance of all materials like cement, screened sand, water etc., to site seigniorage charges, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing mortar, scaffolding charges, lift charges, finishing including cutting of Grooves surfaces of Brick Wall complete for finished item of work (APSS 901,903 & 904)

Plastering to even surfaces of walls with CM (1:5) Prop 20mm thick in single coat including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing mortar,finishing, curing etc., complete for finished item of work. (APSS 901,906 )

Supply and fixing of M.S.plain sheet door of size 40x40x6mm angular for frame of 1no horizontal,2nos and 12 mm square bar at bottom to connect the verticles of the frame and shutters of size 0.52x2.05m -2nos., each made with 35x35x4mm angular alround,25x4mm flat for horizontals 2nos.@ front side, 4nos. @ rear side and supported with 20 gauge M.S.plain sheet,0.30m length aldrops-2nos., each made with 16mm dia M.S.bar of 0.30m length -1no.,20x4 mm flat 0.08m length for rings of 3nos.,0.15m length for supporting, 8mm square bar of (0.30+0.10)m length for locking arrangements, tower bolts 0.20 m length -2nos., each made with 12mm dia M.S.bar of 0.23m length-1 no.,,20x4 mm flat 0.06m length for rings of 2nos.,(0.20+0.04+0.04)m length for supporting, 6mm M.S.bar of 0.06m length for rings-1no.,0.05m length crank bolts- 6 nos., each made with 12mm dia M.S.bar of 0.05m length-1no.,20x4mm flat 0.12m length-2nos.,40x40x6mm angle of 0.25m length each of 6nos.,for holdfasts including red oxide painting including red oxide painting including all etc., complete for size 1.20x2.10m.

Supply and fixing of window of Size 1.50x1.20 M four leaf shutter with window frame of Medium Teak wood of Section 100 mmx75mm and shutter frame of Medium Teak wood of section 100mm x 32 mm thick and window planks of medium fiber board exterior both sides laminated 12mm thick and safety bars of 10mm square bars at 100mm center to center distance horizantally and Hardware fixtures ie., MSPC Butt Hinges 100mm Long 6 Nos, MS Hold Fast 4 Nos Including Labour charges for making window frame and shutter, fixing of fixtures etc., and cost and conveyance of all materials of all materials to site, taxes extxes extra complete for finished item of work.

Flooring with ceramic tiles 7.3mm thick of 1st quality all shades of makes Jhonson & Jhonson, Kajaria, Nitco and Marbonite, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work.

Skirting with ceramic tiles 7.3mm thick of 1st quality all shades of makes Jhonson & Jhonson, Kajaria, Nitco and Marbonite, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work.

Providing walls with white cement two coats using approved brand to give an even shade after thoroughly brushing the surface to remove dirt including cost and conveyance of all materials curing and labour scaffolding,curring and lift charges etc. includinb SURYA CEM

Painting to New External walls with two coats of polymer plastic Emulsion paint of Asian /Berger/Nerolac/ saicoat/Endocem or equalent quality of approved brand and shade as approved by the Engineer -in-charge over base coat of cement primer water base grade-ll exterior making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials , including cost and conveyance of all materials cost of brushes ,water to site etc., sales and other taxes all operational ,incidental and labour charge such as scaffolding charges lift charges curing etc., complete for finished item of work in all floors for external walls (APSS No. 911)

Painting of two coats of ready mixed synthatic enamel paint 1st grade of approved make and shade to new iron work existing one coat of redoxide primary including cost and conveyance of all materials to site cost of primary cost and labour charges etc.

Providing High Yield Strength Deformed (HYSD) steel bars (Fe 415 grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lapsplicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, laour charges such as cutting, bending placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors. (APSS No.126)

SUB ESTIMATE (Water Supply)

Drilling of Bore well by the down the hole hammer drilling finished dia of 150/165mm in all formations suitable for down the hole hammer drilling such as medium hard rock formation all consolidated formations etc and reaming the bore to sub insertion of 180mm UPVC casing pipe etc confirming to IS specifications of 6Kg / cm2 including insertion of UPVC casing pipe wiht couplings sand any other relevent materials upto required depth as directed by the department, transportation of drilling ring and supporting vehicle and including bore developement and flusing bore at an average pressure of 150 PSI and conducting the yield test and crew charges required in fixation of pipe assembly completely done to the satisfaction of the department as stipulated in the technical specificaions but excluding cost of casing pipe, couplings, cap etc as per IS 2800 part 1 & 2 1979 and amendements time to time.

Manufacture, Supply and Delivery of of 25mm dia Unplasticicsed PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revospom) with bell ends (Socket) as per specification in light Grey / Natural Ivory Grey / Any other Color (except White) including cost, conveyance of all mateirals and all labour charges etc complete for finished item of work.

Manufacture, Supply and Delivery of of 25mm dia Unplasticicsed PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revospom) with bell ends (Socket) as per specification in light Grey / Natural Ivory Grey / Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in ap excluding Excise duty nd Sales Tax etc. for 180mm 6Kg/cm2.

Providing and Placing on Terrace (at all floor levels) polyethylene water storage tank with double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks.

Supply and fixing of 15mm dia Nominal Bore G.I. Medium grade pipes properties & weight confirming to relevant IS code 1239 including ISI mark with GI fittings tees, elbows, bends, reducers, couplings, union flanges etc., with necessary excavation in all types of soils except rock requiring blasting, refilling chasing walls, chasing masonry and making good the walls and floors to the original surface and fixing M.S clamps and conveyance of all materials to site, all labour charges, sales and other taxes on all materials etc, complete for finished item of work

Supply and fixing of 20mm dia Nominal Bore G.I. Medium grade pipes properties & weight confirming to relevant IS code 1239 including ISI mark with GI fittings tees, elbows, bends, reducers, couplings, union flanges etc., with necessary excavation in all types of soils except rock requiring blasting, refilling chasing walls, chasing masonry and making good the walls and floors to the original surface and fixing M.S clamps and conveyance of all materials to site, all labour charges, sales and other taxes on all materials etc, complete for finished item of work

Supply and fixing of 25mm dia Nominal Bore G.I. Medium grade pipes properties & weight confirming to relevant IS code 1239 including ISI mark with GI fittings tees, elbows, bends, reducers, couplings, union flanges etc., with necessary excavation in all types of soils except rock requiring blasting, refilling chasing walls, chasing masonry and making good the walls and floors to the original surface and fixing M.S clamps and conveyance of all materials to site, all labour charges, sales and other taxes on all materials etc, complete for finished item of work

Supply and Transportation of ........... 5star rated submerisible motor pumset, confirming to IS 8034 and motor confirming to IS 9283 with water proof winding, Pump shall be suitable for various delivery head and discharge withstainless steel shaft. Motor suitable for working on 240V ± 10%, Single Phase 50 all labour charges for welding transportation etc., complete for finished item.

Fabrication, transporation and supply of suitable size pannel board single phase submersible motar up to 1.5 HP consisting of relay, Contactor, starting and running capacitors, Voltmeter, Ammeter, indicator lamps, MCB, on/off switch including supply and fixing of DOL starter of make C&S/LTLK/Seimens/BCH/Crompton. Complete., ELEC-5.4.15

Supplying of 3 Core …... flat copper cable as per IS 694:1990 for Submersible motors of makes finolex / Havells/V-Guard/Gold Medal/GM/ Million/Vimal/ Nakoda/Nandicab/Payal/Fybros by Kundan cab. ELEC-1.6.3 1.5sqm

DETAIL CUM ABSTRACT ESTIMATE

Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, seigniorage charges, labour charges such as shoring ,sheeting, planking, strutting, dewatering etc. complete for finished item of work as per SS - 20 B (APSS 308). for Building Foundation

Plain Cement Concrete (1:4:8) proportion (cement: fine aggregate: Coarse aggregate) using 40mm size Hard Broken Granite (IS383, 1970) machine crushed metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, mixing concrete in concrete mixer including seigniorage charges, sales & other taxes on all materials, all operational, incidental, and labour charges such as laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work (APSS No. 402)

Vibrated Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for PLINTH BEAM

Vibrated Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 350Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for Slab of 115mm thick

Brick Masonry in superstructure with CM (1:6) prop with Flyash Cement solid blocks of size 290x200x140mm, from approved source having minimum crushing strength of 50 Kgs/Sqcm including cost and conveyance of all materials, labour charges, seiniorage charges scaffolding and curing etc., for Superstructure Walls.

Providing High Yield Strength Deformed (HYSD) steel bars (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lapsplicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, laour charges such as cutting, bending placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors. (APSS No.126)

Plastering 20mm thick in two coat with CM (1:6) dubara sponge finish including cost conveyance of all materials like cement, screened sand, water etc., to site seigniorage charges, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing mortar, scaffolding charges, lift charges, finishing including cutting of Grooves surfaces of Brick Wall complete for finished item of work (APSS 901,903 & 904)

Plastering to even surfaces of walls with CM (1:5) Prop 12mm thick in single coat including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing mortar,finishing, curing etc., complete for finished item of work. (APSS 901,906 )

Ceiling plastering with CM (1:3) Prop 12mm thick single coat spong finish including cost and conveyance of all materials like cement, sand, water etc., to site, including sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing,complete for finished item of work.(SS 901,906)

Flooring with ceramic tiles Non-skid red or white full body Ceramic floor tiles of size 300x300mm and thickness between 7-8 mm 1st quality conforming to IS:13711,IS:13712, IS:13630(Parts 1 to 15) of any colour and finish in all shades and designs, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work.

Dadooing to walls with decorated white back ground glazed ceramic tiles 200mm x 152mm of 7.30mm thick 1st quality of any brand as approved by Engineer-in charge set over above coat of CM(1:5) 12mm thick with neat grey cement paste the at the rate of 3.3 kgs /sqmt dn jointed with white cement paste mixed with pigment of mtching shade including cost adn conveyance of all materials like cement, sand, water, tiles, etc., seigniorage charges, sales and other taxes on all materials C921 such as mixing of cement mortar, laying in position, curing, lift charges etc., complete for finished item of work.

Painting to New External walls with two coats of polymer plastic Emulsion paint of Asian /Berger/Nerolac/ saicoat/Endocem or equalent quality of approved brand and shade as approved by the Engineer -in-charge over base coat of cement primer water base grade-ll exterior making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials , including cost and conveyance of all materials cost of brushes ,water to site etc., sales and other taxes all operational ,incidental and labour charge such as scaffolding charges lift charges curing etc., complete for finished item of work in all floors for external walls (APSS No. 911)

White washing two coats with paint grade white lime for wash or equivalent quality to give an even shade after thouroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges and all labour charges, etc.complete for finished item of work in all floors for walls

Supply and fixing of Rajshri or equivalent Single Side Prelam solid panle PVC door frame (Choukat) providing and fixing factory made pac single side prelam door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid Pac single side prelamsheet, meter cut at two corners and joined with 2nos. of 150mm long brackets of 1515mm MS Square tube. The two vertical door profiles are to be reiforced with 19x19mm MSsqure tube of 19 guage . The door frame shall be fixed to hte wall using 65/100mm long MS screws through the frame by using Pac fasteners a minimum of 4nos of screws to be provideed for each vertical member and minimum of 2nos for horizontal member etc complete as per manufacture specification and direction of engineer-in-Charge. BMT-N.05

Rajshri or equivalent Moulded PVC door - wood free : Providing and fixing 30mm thick Rajshri Brand factory made Moulded door shutter-wood free consisting of frame made of MS tubes 19guage thickness and size of 25x25mm for stiles, top and bottom rails. MS frame shall have a acoat of steel primers. The innner panel shall consist of 25mm thick high density EPS conforming to IS 4671-1984 bounded with 2mm thick termite proof, water proof, and fire resistant moulded pac sheet with 2,4,6 raised panel design in different plain and and / or prelam Pac sheet on other side of EPS. The edge of panel to be sealed with lipping of 10mm wide pvc sheet bottom (made by sticking 2 rigid foam sheet of 5mm thickness using Pac solvent cement) and stiles a25mm (5x5mm thick) and 30mm width PAc sheet fitted along MS tube for lock privision for lock height 5mm thick Pac sheet of size 150x100mm fixed with upper and lower face of inner side of EPS Panel etc complete as per direction of Engineer-in-Charge, manufacture specificaitons and drawings BMT -N.07

Supplying and fixing of SWR PVC pipes (Prince/Sudhakar) 4kg / Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and Constractors profit complete for finished item of work at all floor levels. (APSS No.1302 1319 & 1326)

Supply and fixing of 550 x 400 mm indian make flat back wash hand basin (HSW/Parryware/Neycer) 1st quality conforming to IS : 2556 - Part -4 : 1972 with waste fittings like rubber plug thread conforming to IS:2963 - 1979 and fitted with 15mm nominal bore single chromium plated piller Tap of 1st quality indian make 400 grams Seiko / CI brakets including wooden block 12.7 mm PVC connection with Brass union nut CP coated 12.7 mm dia first qualifty NP angle stop cock, 38.1mm CP waste coupling, 31.75mm CP waste coupling, 31.75mm dia PVC flexible waste pipe of 914.4mm length of first quality including cost and conveyance of all materials to site, all labour charges, sales and other taxes on all materials etc., complete for finished item of work.

Supply and fixing European Water Closet of 1st Quality conforming to IS: 2556-Part-2 1973 of Hindustan / Neycer or Parryware make white glazed with "S" trap suppling and fixing best Indian Make plastic seat and lid for Europen water closets with rubber or plastic buffers as per IS 2548-1996 and 10 litres capacity single flush PVC low level cistern parryware or equivalent with internal componets and CP short bend and fixed using required size of nails and screws, 12mm PVC connections with brass union nuts CP coated and 12.70mm dia NP bib tap 400 grams Seiko or Equivalent including cost and conveyance of all materials to site, overheads & Contrctors profit etc., complete for finished item of work for all floors.

Supply and fixing NP soap dish heavy type with NP screws duly embedded in the brick masonry wall complete for finished item of work for all floors inclduing cost and conveyance of all materials to site all labour charges sales and other taxes on all materials etc complete for finished item of work for all Floors.

Supply and fixing 25.4mm dia and 609.6 mm long alluminium anodized towel rods with brackets and alluminium screwes fixed into the wall over wooden materials to site, all labour charges, sales and other taxes on all materials etc., complete for finished item of work for all floors.

SUB-ESTIMATE (Electrical Estimate)

Supply and fixing of ISI mark 25mm dia 2.2mm thick PVC conduit pipe Sudhakar / Macoplast / Modimake concealed in roof slab with all required acessories including No.14 SWG GI wire for earth continuity including chiseling the wall wherever necessary , including necessary masonery work for light/fan point and seperate plug point with teak wood deep box including cost and conveyance of all materials to site and labour charges, sales tax etc., complete for finished item of work. (SSR 2012-13, item No.1.4.2)

Supply and fixing of ISI mark 25mm dia 1.8mm thick PVC conduit pipe Sudhakar / Macoplast / Modimake concealed in roof slab with all required acessories including No.14 SWG GI wire for earth continuity including chiseling the wall wherever necessary , including necessary masonery work for light/fan point and seperate plug point with teak wood deep box including cost and conveyance of all materials to site and labour charges, sales tax etc., complete for finished item of work. (SSR 2012-13, item No.1.4.2)

Supplying and wiring with 2 runs of 14/0.3m (1.00 Sq.mm) FRLS / HFFR P.V.C. insulated ISI Copper Cable GM/L&T/RPG/Havells/V-Guard/Power Flex/Polycab/Gold Medal/ Standard /Milion / Vimal/ Suncab/ Paragaon / FortuneArt make in the existing metallic / non-metallic conduct pipe with 6A 1 Way flush type switch, Ceiling rose and 3mm thick hylam sheet covering to switch control box including cost and conveyance of all materials to site, labour charges and sales tax etc. complete for finished item of work for light, bell, fan and exhaust fan points in Non-Residential Buildings (SSR-2012-13, item No.2.1.1)

Supply and fixing of 6A 3/2 pin flush type socket with 6A switch control of Anchor / Gold medal olive / Million zoom make with ISI mark on a common switch board with earth continuity including wire leads, earth connections including cost and conveyance of all materials to site, labour charges and sales tax etc. complete for finished item of work

Supply and run 2 of 36/0.3mm (2.5 Sqmm) PVC isulated flexible copper cable of make Standard/Havells/HPL/Toyoma in existing PVC conduit pipe circuits, MV Lamp/Security light points including labour charges (Phase Neutral and earth) and run of 1 of 1.0 sqmm copper cable for earthing.

Supply and fixing 6 way SPN Distribution board with IP-20 protection of make Standard / Havells / HPL/Toyoma/ C &S suitable for single phase 40A Double pole Isolator as incomer and 10KA-6-32A range single pole miniature circuit breakers four numbers (4Nos) as out going with internal connections including cost and conveyance of all materials to site, labour charges for surface / flush mounting etc., sales tax complete for finished item of work.

Providing independent earthing for main switches intergrated circuit cutouts and moters with 40mm dia "B" Class GI pipe of TATA/Zenith/GST make of 2.0 mm length duly providing 12mm dia 16 Nos holes and rewired bolts, nuts and sashers, checknuts, Humepirp ring etc. as per IS specfication with necessary double GI earth wire No.8 SWG including filling with equal preparation of salt and charcoal in layers including filling with equalproportion of slat and charcoal in layers and all labour charges. etc., complete

Supply and Run of 2 of 6 Sq.mm (7/18) WPSC ISI Aluminium wire of makes Finolex / Polycab/Gold Medal / million / Payal/ Power Flex along with No.10 SWG G.I bearer wire through PVC cleats with all accessories including cost and conveyance of all materials to site, labour charges and sales tax etc., complete for finished item of work.

No of items 65 (Sixty-Five) only

Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10mts including all operational, incidental,labour charges such as shoring,sheeting, planking, strutting,etc.complete for finished item of work excluding seigniorage excluding dewatering charges etc as per SS-20-B (APSS 308) for Building Foundation.

Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10mts including all operational, incidental,labour charges such as shoring,sheeting, planking, strutting,etc.complete for finished item of work excluding seigniorage and excluding dewatering charges etc complete as per SS-20-B (APSS 308) for Curtain Walls

Plain Cement Concrete (1:4:8) Proportion nominal mix (Cement:fine aggregate: coarse aggregate) for below flooring beds using 40mm size (SS5) hard granite metal up to Plinth Level from approved quarry including cost and conveyance of all materials like cement,sand,coarse aggregate, water etc, to site, and excluding seigniorage charges, sales& other taxes on all materials including all charges for mixing, laying concrete in foundations ramming in 15 cm layers finishing top surface to the required level curing etc., complete for finished item of work. (APSS No.402) for:- Machine Mix-PCC (1:4:8) NOMINAL MIX.

Plain Cement Concrete (1:5:10) Proportion nominal mix (Cement:fine aggregate: coarse aggregate) for below flooring beds using 40mm size (SS5) hard granite metal up to Plinth Level from approved quarry including cost and conveyance of all materials like cement,sand,coarse aggregate, water etc, to site, and excluding seigniorage charges, sales & other taxes on all materials including all charges for mixing, laying concrete in foundations ramming in 15 cm layers finishing top surface to the required level curing etc., complete for finished item of work. (APSS No.402) for:- Machine Mix-PCC (1:5:10) NOMINAL MIX for Levelling Course and Flooring Bed.

Brick Masonry in superstructure with CM (1:6) prop with Flyash Cement solid blocks of size 290X225X140mm, for manufacturing of flyash solid blocks using flyash of 80kgs, cement of 15kgs, Gypsum of 5kgs, and stone dust with a compresive strength not less than 50kg/sqm including cost and conveyance of all materials, labour charges, excluding seigniorage charges, scaffolding and curing etc., for foundation and basement.

Filling with useful available excavaed earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T&P etc., complete for finished item of work.(APSS.NO.309 & 310) for :- Refilling foundations.

Filling with carted gravel in trenches, sides of foundations & basement from approved quarry in layers not exceeding 15cm thick, consolidating Each deposited layer by watering and ramming, including all operational, incidental, labour charges, hire charges of T & P etc. complete including cost and conveyance of gravel for finished item of work. (APSS No 309 & 310)

Vibrated Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for Footings.

Vibrated Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for Columns.

Vibrated Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for Plinthbeam.

Vibrated Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for Roof Beams.

Vibrated Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete for Slab 125mm thick.

Brick Masonry in superstructure with CM (1:8) prop with Flyash Cement solid blocks of size 290X225X140 mm, for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust with a compresive strength not lessthan 50 kg/sqm including cost and conveyance of all materials, labour charges, seiniorage charges, scaffolding and curing etc., for Superstructure Walls.

Plastering with CM (1:5) Prop:12mm thick in single coat including cost and conveyance of all materials like cement,sand,water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, all operational, incidental charges and labour charges such as mixing mortar, finishing, curing, etc., complete for finished item of work (APSS 901,906)

Ceiling Plastering CM (1:3) Prop: 12mm thick in single coat sponge finish including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials,all operational, incidental and labour charges such as mixing mortar, lift charges, including cutting of Grooves wherever necessary as directed by Engineer - in - charge, finishing, curing, etc., complete for finished item of work. (APSS 901,903 & 904)

Plastering with CM (1:5) Prop: 20mm thick in single coat including cost and conveyance of all materials like cement,sand,water etc., to site,excluding seigniorage charges, sales & other taxes on all materials, all operational, incidental charges and labour charges such as mixing mortar, finishing, curing, etc., complete for finished item of work (APSS 901,906)

Providing impervious coat to exposed RCC roof slab surface with CM (1:3) 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, excluding seigniorage charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work

Flooring with ceramic tiles 7.3mm thick of 1st quality all shades of makes Jhonson & Jhonson, Kajaria, Nitco and Marbonite, set over base coat of cement mortar (1:8) 12mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, excluding seigniorage charges, etc., complete for finished item of work.

Providing Skirting to internal walls to height of 15cm and Risers with ceramic tiles 7.3mm thick of 1st quality all shades of makes Jhonson & Jhonson, Kajaria, Nitco and Marbonite, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete excluding seigniorage charges, etc., complete for finished item of work.

Dadooing to walls with Decorated white back ground glazed tiles 200mmX152mm 1st quality of any bramd as approved by Engineer-in-charge and set over a base coat of CM (1:5), 12mm thick and neat cement paste at the rate of 3.3Kgs/sqmt. And jointed with white cement paste mixed with pigment of matching shade including cost and conveyance of all materials like cement,sand, water, tiles, etc to site, excluding seigniorage charges, sales and other taxes on all materials, C921 such as mixing of cement mortar, laying in position, curing, lift charges etc., complete for finished item of work. All Floors.

Supply and fixing of Zinc Pipe Door size 0.75X1.83Mts using outer frame Horizontal, Vertical and Center Supports of 25X25X3MM Square pipe and fixing zink sheet 4mm thick including fabrication and fixing cost and conveyance of all materials and labour chargers etc., complete of size 0.75X1.83Mts

Supply and fixing of Zinc Pipe Safety Grill of Outer frame 25X25X3 MM Zink Pipe and center supports 25X25X3 MM of 100MM C/C including cost and conveyance all materials and fabrication charges, fixing charges etc.,complete.

White washing two coats with White Cement or equivalent quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work in all floors for walls

Painting to new internal walls with two (2) coats of ready mixed oil bound washable distemper acrylic base of approved brand and shade over a base coat of cement primer water base interior Grade-I of approved brand, makind three (3) coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work in all floors for internal walls (SS 911)

Painting to New External Walls with two coats of Polymer Plastic Emulsion paint of Asian / Berger / Nerolac / Saicoat / Endocem or equalent quality of approved brand and shade as approved by the Engineer - in - Charge over base coat of cement primer water base grade -II exterior making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for external Walls. (APSS No. 911)

Painting to New Iron work with two coats of ready mixed synthetic enamel paint first quality all shades over red oxide primer Grade-I making three (3) coats in all to given and even shade after thourughly brushing the surface to remove all dirt and remains of loose powered materials, including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc., complete for finished item of work. (APSS No. 1201, 1207 & 1212).in All Floors

Providing High Yield Strength Deformed (HYSD) steel bars (Fe 500 grade as per Is 1786-1985) of 8mm to 40mm diameters, cutting, bending, to required sizes and shapes placing in position with cover blocks of approved size and binding wire of 20Swg, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of bars from approved sources to site of work,including cost and conveyance of binding wire, cover blocks, chairs, overlaps, spacers, dowels, wasage etc., and all operational, incidental, and labour charges such as cutting, bending, placing in position, tying etc., and sales & other taxes, on cost of all materials complete for finished item of work (APSS No.126)

Supply and fixing of 25mm dia 1.80mm thick PVC Pipe of make Sudhakar/Maco plast/Modi (ISI MARK) concealed in wall with all required accessories including masonry work for light,fan and separate plug point with hot dip galvanised metal box including all labour charges etc., complete.

Supplying and wiring with 2 runs of 14/0.3m (1.00 Sq.mm) FRLS/HFFR P.V.C.insulated ISI Copper Cable Finolex / RR kabel / Fortune Art EBXL make in the existing metallic/non-metallic conduct pipe with 6A 1 Way flush type switch, Ceiling rose and 3mm thick hylam sheet covering to switch control box including cost and conveyance of all materials to site labour charges and sales tax etc. complete for finished item of work for light, bell, fan and exhaust fan points in Non-Residential Buildings (SSR-2011-12, item No. 2.1.1)

Supply and fixing of 6A 3/2 pin flush type socket with 6A switch control of Anchor/Gold medal olive/Million zoom make with ISI mark on a common switch board with earth continuity including wire leads earth connections including cost and conveyance of all materials to site, labour charges and sales tax etc. complete for finished item of work

Supply and fixing up to 25/26W Retrofit CFL of Makes bulb including cost and conveyance of all materials, taxes and all labor charges etc., complete.

Supply and run of 2 of 2.5 Sqmm PVC insulated flexible copper cable of Havells make in existing PVC conduit pipe circuits, MV Lamp/Security light points including laboiur charges (Phase, Neutral and earth) and run of 1 of 1.0 sqmm copper cable for earthing

Lowering and laying the HDPE Pipe line in to the ready made trenches and laying them trune to alignment and gradient and jointing with jointing materials (liquid) and testing the pipe line to the required hydralic pressure test including earth work excavation and depositing on banks with initial lead andlift of size 0.30MtsX0.75Mts for the pipe line and refilling to original condition including jointing charges, but excluding cost of pipes, specials and valves, but including conveyance of pipes and specials to site and all labour charges etc complete.25MM dia HDPE Pipe of 10Kg/Sqm

Supply and fixing of Ashirvad/ Ajay/ Asral Flowguard or equivalent CPVC Pipes and Fittings to meet the requirement of ASTM -D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical properties for Hot and Cold Water (IS 15778:2007) 28.60mm OD Pipe - SDR 13.5 (BMW-I.222)

Supply and fixing of Ashirvad/ Ajay/ Asral Flowguard or equivalent CPVC Pipes and Fittings to meet the requirement of ASTM -D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical properties for Hot and Cold Water (IS 15778:2007) 22.20mm OD Pipe - SDR 13.5 (BMW-I.221)

Supply and fixing of Ashirvad/ Ajay/ Asral Flowguard or equivalent CPVC Pipes and Fittings to meet the requirement of ASTM -D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical properties for Hot and Cold Water (IS 15778:2007) 15.90mm OD Pipe - SDR 13.5 (BMW-I.220)

Supply and fixing 12.70mm N.P.bib tap Indian make 300 grams Sl.No. 182 - BMW-F

Supplying & Fixing Orissa Pan 580MMX440MM white glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-1981 with "P" or "S" trap Hindware/ Parryware/ Neycer - ISI mark 580MMX440MM as approved by the Engineer-in-charge fixed in brick masonry with necessary ‘S’ trap of water closet, shall be encased in C.C.(1:2:4) 6" alround well above the joint, to stop leakage at the joint, cost & conveyance of all materials and labour charges etc., including sales and other taxes on all materials complete for finished item of work for all floors.

Supply, laying,jointing and testing 110mm dia 3Mts length Single Socket PVC/SWR Pipe - 6Kg/Sq.cm including cost and conveyance of all materials to site,all labour charges, sales andother taxes on all materials etc., comlete for finished item of work.

Supply, laying,jointing and testing 110mm dia - 45 Degree Bend UPVC/SWR including cost and conveyance of all materials to site,all labour charges, sales andother taxes on all materials etc., comlete for finished item of work.

Supply, laying,jointing and testing 75mm dia 3Mts length Single Socket PVC/SWR Pipe - 6Kg/Sq.cm including cost and conveyance of all materials to site,all labour charges, sales andother taxes on all materials etc., comlete for finished item of work.

No of items 41 (Forty One) only