Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.3 CrAccepted-AOC | ₹2.3 Cr | L1 | Accepted-AOC Lowest bidder in Lottery |
| 2 | L2₹2.3 CrRejected-AOC | ₹2.3 Cr | L2 | Rejected-AOC Not a lowest bidder |
| 3 | L2₹2.3 CrRejected-AOC | ₹2.3 Cr | L2 | Rejected-AOC Not a lowest bidder |
| 4 | L2₹2.3 CrRejected-AOC | ₹2.3 Cr | L2 | Rejected-AOC Not a lowest bidder |
| 5 | L2₹2.3 CrRejected-AOC | ₹2.3 Cr | L2 | Rejected-AOC Not a lowest bidder |
Tender Value
₹2.3 Cr
EMD Value
₹2.3 L
Closing Date
9 Dec 2025, 5:00 pmClosed
Managing Director
The Managing Director, WATCO Ground Floor, Unnati Bhawan, Satyanagar, Bhubaneswar-751007, Odisha, India (0674) 2571444
Construction of positive suction pump house with suction, delivery and pumping arrangement with electrical installations and all other ancillary works etc. at District centre C.S.Pur BBSR for effecting Bulk supply from 30ML MBR at Sikharchandi, BBSR
2025_WATCO_121732_1
WATCO (W)-25(05)/2025-26 Dtd.18.11.2025
National Competitive Bid
Civil Works - Water Works
365 days
Sikharchandi, BBSR
Please refer Tender documents.
3 documents required · 3 mandatory
₹11,800
₹2.3 L
Yes
23 Mar 2026
25 Nov 2025
11 Dec 2025
25 Nov 2025
9 Dec 2025
25 Nov 2025
25 Nov 2025 - 1 Dec 2025
LAYING AND FIXING OF WATER SUPPLY PIPE LINES , VALVES WITH ANCILARY WORKS ETC
Earth work in all kinds of soil within 50mtr initial lead and 1.5mtr initial lift including rough dressing and breaking of clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3mtr in depth as per direction of Engineer-in-charge.
Supplying all labour, T&P for cutting in dis-integrated rock, not requiringblastingand to be removed by pick axes and crow bars and depositing the materials within 50M intial lead and 1.5M initial lift including rough dressing as per the direction of Engineer-in-charge and the specification of the department including the stacking of useful materials separately as ordered.
Supplying of materials, labour and T&P for excavation of foundation in laterite rock or any hard rock(other than granite or disintegrated rock)removed by chiselling including dressing and leveling the bed not exceeding 1.5mtr depth and depositing the soil within 50mtr initial lead as per specification approved by the Deptt.as per direction of Engineer-in-charge.
600mm dia D.I K-9 S/S pipe excluding cost of pipe
Supplying of all labour, and T&P for providing Push-on-joints conforming to IS:3114 to centrifugally (Spun) Cast Iron Pipes or Ductile Iron pipes using rubber gasket conforming to IS:5382 of Styrene Butadene Rubber (S.B.R) quality, testing of joints,etc. all complete as per specifications and directions of Engineer-in-Charge.
600mm dia Push - on-Joints
Supplying all materials ,abour, T&P for providing ,laying,fixing and testing of DI/CI specials,bends,etc in trenches confirming to IS:1538 all complete (excluding earth work) as per specification and as per the direction of EIC.
Sunken pump house ( pump set having head - 40 mtr discharge- 45 LPS)
Supplying all labour T&P for Cutting of C.I/ D I pipe by eletric arc welding at site including cost of materials,labour,T & P etc all complete e as per the direction of Engineer-in-charge.
Supplying of materials, labour and T&P for laying in trenches C.I. specials conforming to I.S.-1538 of the following diameter as per P.H. specifications . (excluding earth work in excavation,jointing and cost of specials) as per direction of Engineer-in-charge.
600mm MJ STP
450mm MJ STP
350mm MJ STP
300mm MJ STP
Supplying all labour and T&P for providing and laying MS pipe and specials confirming to IS 3589/99 of quality grade FE 410 of following nominal dia and including transportation of pipes and fitting to site etc all complete as per the direction of E.I.C.
350mm dia DI (D/F) Butter Fly Valve
600mm MS Pipe(6.30 mm thick)
Supplying all labour T&P materials for fitting & Fxing of pressure meter Non comtact dipharma type with snubber, pipeing & needle valve at ESR as well as diferent lane & sub-lane to know the water pressure including the cost of pressre meter with drilling holes in pipe line & making good to the damages at including cost all labours T&P etc all complete as per the direction of Engieer-in-charges. 0 to 10kg/sqm pressure meter 150 mm dia
200mm dia M.S.Pipe (6.30mm thick)
Supplying all labour materilas and T&P for providing cement washing two coats to walls on plastered surface to give an even shade in all heights including cost, conveyance, taxes of all materials, cost of all labour, T&P safety belts, sundries etc. as required for the work complete ..
200mm x 150mm dia M.S. Reducer (Plain)
150mm dia M.S.Pipe (6.30mm thick)
150mm dia M.S. Flange.(12mm thick)
150mm x 100mm dia M.S. Reducer plain
300mm MS Pipe(7.10mm thick)
450mm dia M.S. Flange.(16mm thick)
600mm dia M.S. Flange.(20mm thick)
350mm dia M.S. Flange.(16mm thick)
450mmx 600mmx 450mm dia MS Tee ( plain)
350mmx 600mmx 350mm dia MS Tee ( plain)
600mmx 400mmx 600mm dia MS Tee ( plain)
600mm dia x 90 degree MS bend
300mm dia x 90 degree MS bend
400mm dia x 90 degree MS bend
400mm dia x 45 degree MS bend
400mm x 300mm dia MS reducer plain
400mm dia x 16mm thick MS Blank Flange
50 mm MS pipe(5.40mm thick)
50mm MS flange(10mm thick)
50mm MS 90* Plain Bend
400mm dia M.S. Flange.(16mm thick)
300mm dia M.S. Flange.(12mm thick)
600mmx 300mm dia MS reducer plain
Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately including cost of all labour, T & P etc. all complete as per the direction of engineer-in-charge.
Laying in trenches Centrifugally cast (SPUN) DUCTILE IRON Pressure Socket & spigot pipe of Class - K7 or K9 with cement mortar lining conforming to I.S. 8329 of the following nominal diameter as per specification, complete for push on rubber gasket jointing.., as per the specification, all complete as per direction of engineer-in-charge ( Earth work in trenches jointing of pipes specials and fitting to be meausred separately)
for 600 mm diameter DI K-9 pipe
Supplying all materials Labour & T & P for Fixing Ductile Iron Resilient seated Sluice Valve / NR Valve/ BF Valve with double flanged ends for water works purposes conforming to IS specification for the following nominal diameters as per specification complete including cost of Sluice valve .(VAG /TALIS/AVK/KIRLOSKAR/IVC/Hawle or equivalent make with approval of the authority)
100mm dia M.S. Flange.(12mm thick)
150mm dia D/F Sluice Valve (PN1.6)
200mm dia D/F Sluice Valve (PN1.6)
150mm dia Ductile Iron Reflux Valves (Non-return valves) with double flanged ends
400mm dia DI (D/F) Butter Fly Valve
Supplying all labour and T&P for cutting of following dia MS pipe of following thick in treanches by gas cutter set of pocket etc all complete
Supplying all labour and T&P for jointing following dia MS pipe up to 8.0mm thick in treanches by electric arc welding & genetator set of pocket etc all complete ( at work site)
Supplying all materials,labour and T&P and making flanged joints for C.I. / D I pipes and specials of the following diameter including testing of joints as per specification and direction of Engineer-in-charge
50mm flange joints-
100mm flange joints
150mm flange joints
200mm flange joints
350mm flange joints
400mm flange joints
450mm flange joints
600mm flange joints
300mm flange joints
400mm dia M.S.Pipe (8.80mm thick)
Supplying and Filling well graded sand including watering, ramming, consolidating, dressing, etc. all complete as per specifications and direction of Engineer In-charge for: (including cost of sand).
Cement concrete (1:4:8) with 4cm. Size crusher broken hard Granite metal including cost of all labour, materials with all taxes, lead,T & P etc all complete .
Supplying all materials, labour and T & P for Cement concrete (1:2:4) with 12mm size crusher broken hard granite metal including cost of all labour, materials with all taxes, lead, T & P etc all complete and as per direction of Engineer -in- Charge.
Supplying all materials,labour and T&P and constructing RCC sluice Valve chamber of over all of following internal ; earth work in excavation in all kinds of soil laying of 150mm thick cc (1:3:6) with crusher broken hard granite metal up to 4cm size metal 250mm thickrrcc working CM (1:4) with rcc (1:11/2:3)having crushing stremgth between 75 kg/cmsq 12mm thick cement plastering with CM (1:3) with punning for inside surface & out side plastering above GL & cement pointing below GL etc. all Complete including precast factory made heavy deauty RCC cover slab with frame (SD-20) made out of M30 concrete to with stand again 20mt vehicular load as per the approved drawing if any and the direction of EIC. S.V. chamber internal size:-[1.20x1.20x1.50mtr]
300mm flow control valve
300mm flow meter
25mm dia Tamper proof Duojet Air Valve
Supply, installation of earthing with crystalline conducting material for Back Fill Compound & installation of Maintenance Free Earthing Electrode with ISI mark G.I. Pipe dia 50mm as Secondary electrode with wall thickness of 2.6mm and the primary earthing electrode will be 25mm x 6mm hot dipped galvanized strip filled with a highly conductive & non-corrosive compound in between the primary earthing & the secondary earthing. A solid G.I. Base plate of 300 x 300 mm seals the unit at the bottom. Ground filling compound will be provided in 25kg per bag - 2nos. Excavation of earth pit refilling, Precast RCC chamber with lid etc. all complete as per the site requirement.
Supplying all material, labour, T & P for fitting & fixing of double chamber DI Control Valve(globe type) with Solenoid, hydrullic operated wutg stem and positioner for feed back switch, selonoid valve, integral office plate assembly, diffrential control, reverse flow control, restriction orifice body PN-1.6 can be integrated with PLC pannel for opration with a minimum pressure in, upstream 0.2 kg/cm2 to a maximum pressure of 8kg/cm2 of (make CLA/AVK /Singer/IVC/Equivalent make with approval of the authority ) to control water supply including cost of material with all taxes transportation to site / Storage with insurance.
Supplying of electric powered electromagnetic full bore type IP 68 fully welded flanged type water flow meter of pulse DC type of flow tube SS304, coil housing & electrodes SS316, SS ring type grounding etc IP68 signal converter remote mounting, input power 24V DC 4-20mA programable LCD display to show Actual flow rate, totalised flow , flow direction, flow velocity, conductivity with + or - 0.5% accuracy etc & provision to diagnositics empty pipe detection, coil temperature, coil resistance etc & compatable to data communication modules with masibus
& communication the data to remote SCADA station for live monitoring where ever required including providing data cable & power cable required as per site condition. The standard calibration certificate & guarantee certificate for flow meter & electromagnetic signal converter to be given for minimum one year from the date of installation. (Make- KROHNE MARSHALL/E&H/ABB/SIEMENS/Equivalent make with approval of authority) including cost of material with all taxes transportation of site & storage with insurance.
Supply of Pressure Transmitter to be installed at delivery line with following technical specification.i,e. Range up to 10 kg.cm2, Type-Sensor, Power Supply-24DC,Out put-4-20mA,(Make-E & H/ABB/VEGA/WIKA/Equivalent make with approval of authority)
Supply, Installation, Testing Wiring & Commissioning IP 66 rated Metal outdoor Flowmeter display panel- having 16A Dp RCBO 30Ma-1Nos, 6A DP MCB-2 Nos, 2A SP MCB-2NOS, 24VDC 5A Power supply module-1 Nos, complete with all inter connection with copper wire with coper lugs. - All switchgear and controlgear make- Siemens, Schneider, ABB,L&T,LEGRAND/Equivalent make with approval of the authority. All completed as per electrical specification and as per direction of EIC.
Supplying installation & commsioning of PT Chamber IP69 size 220x170x96 mm withprovision of two cable entry all copmlete as per direction of EIC.
Supplying, Installation & Commissioning of PLC panel made out of 2mm CR sheet of size 800mmx 800mmx 2100mm floor mounted powder coated 7 tank process with following components i.e CPU should have 1 MB program memory with extended memory slut Redundant 24 VDC , SMPS 10Amp along with 24V DC SPD IO count as DI 24 , DO-20 , AI-20, AO- 08 & MODBUS-10 sub system shall be same series as CPU ,10 inch panel mounted HMI , modem shoud have support MQTT Protocol by default, 24Volt DC industrial switch with minimum 6 earthmate , 4 SFP port each AI shall be equipped with suitable signal isolator of 20 nos & surge protection device 20 nos LIU isolator , 230Volt AC /230volt AC Torroidal transformer , 1 KVA 230V AC UPS should have capacity to charge 3 nos 12 VDC 65AH battery bank, DP MCB of adequate current capacity, LED tube light 10 inch 5 watt , Door limit switch fan 6 inch with louvers , 4 sqmm straight through terminal and fuse terminal 90 nos earthing plate . Make:- Siemens,Schnider,ABB,Mitsubishi/Equivalent make with approval of authority including cost of material with all taxes , transportation to site /storage with insurance. (with both side door)
4corex1.5 Sqmm copper armoured cable ( for Flow control valve)
6 corex1.5 Sqmm copper armoured cable ( for Electromagnetic Flow meter)
2 corex1.5 Sqmm copper armoured cable ( for PT/LT)
Supplying all material , labour and T & P for Integration of instrument like flow meter,control valve,level transducer & pressure transducer etc.
Construction of Positive suction Pump house ( 8mtrx 5mtr internal dimension)
Earth work of excavation in Cutting in disintegrated rock not requiring blasting to be removed by pick axes and crow bars and depositing materials within 50m initial lead and 1.5m initial lift including rough dressing as per direction and specification of the department including stacking the useful materials separately as ordered etc as per direction of Engineer - in - Charge.
1st depth
Earth work of excavationof founation in laterite rock or any hard rock (other than granite or disintigrated rock) removed by chiselling including dressing and levelling the bed not exceeding 1.5m in depth and depositing the soil within initial lead of 50m and as per specification approved by the Department
1st depth
2nd depth
Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to work site, payment of royalty , taxes& labour cess etc all complete as per specification and direction of Engineer-in-charge.
Cement concrete (1:3:6) with 4cm. Size crusher broken hard Granite metal including cost of all labour ,materials with all taxes, lead ,T & P etc all complete .
Supplying all labour , T&P and removing surplus earth /debrise by mechanical means within 5 K.M radious etc all complete as per the direction of EIC.
Fly ash bricks of 25cmx12cmx8cm. Size having crushing strength not less than 75 Kg/Sqcm. With dimensional tolerance +2%. percentin cement mortar (1:6) brick masonary in super structure
Foundation and plinth
Superstructure and Deductions
R.C.C work in ground floor of M-25 grade with 20mm & down grade crusher broken hard Granite chips including hoisting & laying with cost of all labour, materials with all taxes, lead ,T & P etc all complete .
Rigid smooth centring and shuttering for R.C.C. works including false work and dismantling then after casting including cost of materials all complete.
R.C.C. Foundation, Plinth Band, Footings, Bases of Columns, Mass Concrete & Precast Slabs etc.
R.C.C. Walls and Fins
RCC columns & beams
RCC walkway slabs
RCC beams
RCC lintel
RCC chajja
Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification.
6 mm thick cement plaster (1:4) to R CC surfaces finished smooth including closed deep chiping and slury treatment ( for inside area)
Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32 mm x 32 mm x 2 mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect.C/C and stainless square pipe bracing of size case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect.
Supplying all materials, labour, T&P and fixing of Fixing KOTA Tile in floors or steps & landing on 25mm. thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing & polishing complete polishing etc all complete. as per the direction of the Engineer in charge.
Supplying all materials,labour and T&P for fitting and fixing of single Monorail section made out of ISMB 250X 125mm ( I section joist) including hoisting of the ISMB and placing in position under roof ceiling rigidly supported on the walls and beams at both ends and mid points with fixing of 16mm thick MS plate dully welded and jointed with the top flange of the ISMB and anchored on walls and beams with rigid and adequate bolting as per site condition including fitting and fixing of mechanical pulley 3 MT capacity with chain all complete confirming to IS-800-2007 for the positive suction pump houses etc all complete as per the direction of Engineer in charge.
ISMB ( 250x 125mm )
MS plate ( 300mmx 300mmx 12mm )
Supplying all materials, labour and T&P for Flame cutting and facing of MS plate or pipes from 8mm to 12mm thick including supply of all labor, material, tools & plants for following plate thickness all complete as per specification and direction of Engineer-in-Charge.
Welding with two welding beads/pass, conforming to IS:816-1998 (Fillet weld) to MS pipes and fittings at site
Hoisting joists and trusses and placing in position
Drilling holes 12mm to 25mm dia in iron flats, angles, tees etc. above 10mm thick & upto 16mm thick with hand drill(labour only)
Supplying all labour ,materials and t& P for fitting and fixing of indef ( P3) 3 Ton with 5 mtr Chain pulley block with double bearing , grade-80 material with rugged german design , zinc plated , casting type- Fully pocketed , spheroidal graphaite cast with 0.50 MT over load capacity with powder coated finished, the pulley block shall be comprised of , frame, gears, pawl, bearings, hooks, , load chain, load chain wheel, hand chain, hand chain wheel, hand chain guide and all other components like guide, stripper, midler wheels, anchorage etc confirming to IS 3832-1986 all complete as per direction of Engineer in charge
Supplying all labour, materials and toold and plants for enamel painting two coats over a coat of primer on MS doors/grills, ISMB joist, MS plate etc as per the approved shade and colour as per direction of Engineer in charge
Supplying all labour, material & T&P and Lowering of splitcase pumpset all complete
16 mm. thick cement plaster (1 :6) over brick or stone masonry
12 mm. thick cement plaster (1 :6) over brick or stone masonry
20mm. thick cement plaster (1:6) for stone work
Provision for Plastic emulsion painting two coats to walls with over a coat of primer of approved shade on plastered surface to give an even shade in all heights including cost, conveyance, taxes of all materials, cost of all labour, T&P safety belts, sundries etc. as required for the work complete .
Supplying all materials labour T&P for providing M.S. Grill/ Grill gate /Pipe as per following size as per specification.all complete.
Providing , fitting & fixing up UPVC ( Unplasticized Poly vinyle Chloride ) window (sliding type) with 5 mm clear float glass of LG profile as per approved specification including all cost conveyance labour T & P etc complete as per direction of Engineer in Charge.
Cement concrete (1:4:8) with 4cm. Size crusher broken hard Granite metal including cost of all labour ,materials with all taxes, lead ,T & P etc all complete .
Cement concrete (1:2:4) with 12cm. Size crusher broken hard Granite chips including cost of all labour ,materials with all taxes, lead ,T & P etc all complete .
Suppply of Level Transmitter to be installed at UGR and ESR with following technical specification. i.e Range=0 - 8 mtr, Type=rada, Power supply=24VDC, Out put=4-20mA, Make-E & H/ABB/VEGA/WIKA/Equivalent make with approval of authority
Light Points, Group - A
Light Points Group - B
5A Plug Point
Fan Point (Group - A)
Supplying all materials labour & T & P for fitting & fixing of following electrical installations including testing & commissioning etc. complete as per direction of Engineer in Charge.
Step up modular regulator for Fan
15watt LED Bulb.
Supply,Installation & Commissioning of SCADA software with Graphical processor visualisation Advanced alaram management,historical and Real time trending,Built-in-reporting,Stastical process control,Multithreaded citect VBA and Cicode programming language with 500 Tag SCADA Software,1KVa online Ups with 30Min batery backup- 1Nos,CPU Having Preloaded win-10 Proffessional, I3-10gen 2.4 Ghz Prrocessor, DDR4 8gb Ram, 500 gb 7200 Rpm HDD-1 Nos ( Make- HP,DELL,LENOVO),USB based keyboard - 1Nos,USB based Optical Mouse- 1Nos,43'' LED monitor - 1Nos,A4 size laserPrinter - 1Nos,Wooden Computer table - 1 Nos ,Preparation of P&I diagram, Creation of Multi visualization screen for Process control,alarm managenent, Historical and realtime process trend, Daily reporting etc complete as per requirement & direction of Engineer - in - Charge.(Make-Schiender/Simens/Rockwell/Equivalent make with approval of authority)
Supply and Laying of 40MM dia HDPE pipe in cable trench as per specification and directions of Site Engineer / Engineer-in-Charge.
Titanio Pro LED Tube Light -18W (Double side connection)
32A Double Pole MCB.
5 Amp switch
5 Amp socket
Ceiling Rose -
Angle Holder
Supplying all material, labour, T & P for laying different types of cables for fcv, fm, ducting pipe automation work and S for fitting of PLC panel with following data/ power cables of Lap make including jointingsocketing testing & commissioning etc. complete as per specification basing on requirement and direction of Engineer in charge.as per electrical specification.(Make:-Finolex/L&T /Anchor/ Havells /V Guard/Equivalent make with approval of the authority)
Providing weather coat painting two coats over a coat of primer of approved shade of walls including cost conveyance of all materials, etc. all complete as per specification & direction of Engineer-in-charge.
Supplying all materials labour T&P for providing fitting & fixing of MS plate 6mm thick over the door grills as per following size as per specification.all complete.
Supplying all labour, materials and toold and plants for enamel painting two cioatrs over a coat of primer on MS doors/grills as per the approved shade and colour as per direction of Engineer in charge
Double Stage Centering and Shuttering for Roof Slabs, Balconies and Projections above 3.60m and upto 7.20m heights
Supplying all labour and tools and plants for Dismantling of RCC walls by means of core cutting of 150mm dia to avoid further damage to adjacent concrete and reinfcorement so that the reinforcement can be rewelded properly by chiselling with electric breaker weighing up to 7.50Kg with capacity of 20 joules impact to concrete at least leaving a weldable length that core should be taken to size they cut slabs to size so that can easily be removed from site by head load or by chain hauled from inside all complete
Supplying all materials labour & T & P for making water proof Micro Concrete of any reputed brand (Preferable Perma Polycrete/jaipax) for R.C.C. works including hoisting and laying etc. complete as per direction of Eng
ineer in charge.
Supplying all labour, materials. T&P for for sealing the Joint usingPerma Polyseal (POLYSULPHIDE SEALANT) in 50mm x 25mm size groove including all cost. conveyance. wastages & taxes etc. all complete.
Construction of PLC & Electrical panel room & Chlorination Room
Cutting in disintegrated rock not requiring blasting to be removed by pick axes and crow bars and depositing materials within 50m initial lead and 1.5m initial lift including rough dressing as per direction and specification of the department including stacking the useful materials separately as ordered etc as per direction of Engineer - in - Charge.
Excavation of founation in laterite rock or any hard rock (other than granite or disintigrated rock) removed by chiselling including dressing and levelling the bed not exceeding 1.5m in depth and depositing the soil within initial lead of 50m and as per specification approved by the Department for 1st Depth
Supplying all materials, labour and T&P for filling approved SAND of specified quality under floors, in foundations, plinths, etc. for all depths and heights including cost of sand, royalties, transportation to site for all leads and lifts,including loading, unloading, spreading in layers all complete as per drawings, specifications and direction of Engineer-incharge.
Cement concrete (1:3:6) using 40 mm. size hard granite crusher broken metal including watering and curing including cost, conveyance, royalties and taxes of all materials, labour, T&P etc. complete as directed by Engineer-in charge.
Brick work with Fly ash bricks of 25cmx12cmx8cm. Size having crushing strength not less than 75 Kg/Sqcm. With dimensional tolerance +2%. percentt in cement mortar (1:6) in foundation and plinth
Brick work with Fly ash bricks of 25cmx12cmx8cm. Size having crushing strength not less than 75 Kg/Sqcm. With dimensional tolerance +2%. percentt in cement mortar (1:6) in superstructure
Supplying all materials,labour and T&P for filling foundation and plinth with excavated materials as per direction of Engineer-in-charge.
Rigid smooth centring and shuttering for R.C.C. works including false work and dismantling then after casting including cost of materials all complete.
Supplying of all materials, labour T&P for RCC (1:11/2:3) with 12mm size hard granite crusher broken chips for RCC work excluding centering ,shuttering with all cost, conveyance, royalty & taxes etc. all complete as per P.W.D. specification and direction of Engineer-in-charge.
RCC column base /footing
RCC columns, plinth beams
RCC Roof slab & chajja
Supplying of all materials, labour T&P for M.S reinforcement for RCC work including cutting, bending, binding, straightening & tying grills and placing in position including cost of binding wire 18 to 20 gauge, M.S. Rod/Tor steel with all cost, conveyance & taxes etc. all complete as per P.W.D. specification & direction of Engineer-in-charge.
12mm thick cement plaster in cement mortar (1:6) in all floors at all height finishing smooth to rough surface of brick walls after raking out the joints including watering and curing, rounding of corners with cost, conveyance, royalties and taxes of all materials and cost of all labour, scaffolding, sundries and T& P. etc. required for the work etc. complete as directed by the Engineer in charge.
16mm thick cement plaster in cement mortar (1:6) in all floors at all height finishing smooth to rough surface of brick walls after raking out the joints including watering and curing, rounding of corners with cost, conveyance, royalties and taxes of all materials and cost of all labour, scaffolding, sundries and T& P. etc. required for the work etc. complete as directed by the Engineer in charge.
6 mm thick cement plaster (1:4) to R CC surfaces finished smooth including closed deep chiping and slury treatment
Providing ,fixing of false celling with Aluminium anodised T section No. 3215 with 2feet C/C ,L section 1705 up to 15 micron on 4 walls to be fixed by means of steel screw P.V.C plug Alumunium grid to feet into grid suspended from celling etc all complete. including cost of scaffolding stagging charges with cost of all materials ,labour, T & P etc all complete.
1200mm Ceiling Fan (Havells/ Bajaj/Usha/ Equivalent make with approval of the authority)
1200mm Ceiling Fan (Havells/ Bajaj/Usha/ Equivalent make with approval of the authority)
Finishing wall surface of walls with Acrylic wall putty (Water based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete.
Supplying all labour, materials and toold and plants for enamel painting two coats over a coat of primer on MS doors/grills, ISMB joist, MS plate etc as per the approved shade and colour as per direction of Engineer in charge
600mm dia DI (D/F) Butter Fly Valve
Provision for Plastic emulsion painting two coats to walls with over a coat of primer of approved shade on plastered surface to give an even shade in all heights including cost, conveyance, taxes of all materials, cost of all labour, T&P safety belts, sundries etc. as required for the work complete .
Supplying,fitting and fixing in position M.S verandah grill/grill gate/grill door/window grill of approved desing made out of 40mmx40x6mm size M.S.Angles welded with 25ccx6mm size M.S flat including cutting the M.S flat to proper sizes,welding,chamfering and one coat of priming with red oxide and fixing with C.C (1:3:6)including cost,conveyance,royalties,taxes of all materials,cost of all labour,sundries and T&P etc.required for the work complete as directred by the Engineer-in-change.
Providing wall painting 2 coats with weather paint of approved shade on wall surface over a coat of water bound wall cement primer to give an even shade including cost of brushes& putty including cost, conveyance, royalities etc, all complete.
Supplying all materials , labour & T & P for Painting of M.S. pipe, Gate, Door & windows with 2 coats of enamel paint over a coat of primer including cost of all labour, materials with all taxes, lead ,T&P etc all complete. Window Grill 5x1x1.20x1.20
Cement concrete (1:2:4 with 12mm . Size crusher broken hard Granite chips including cost of all labour, materials with all taxes, lead,T & P etc all complete .
Fixing Vertified floor tiles of premium grade having thickness 8 mm to 10 mm confirming to IS:13756 of following sizes in floors or steps & landing on 25mm. thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing & polishing complete With cost of Vertified tiles 60cm x 60cm Coloured/printed series
2.5cm. thick grading concrete (1:2:2)on roof slab with 6mm. Size on new work crusher broken hard Granite chips including cost of all labour, materials with all taxes, lead, T & P etc all complete.
Construction of Compound wall & approcha way
Earth work of excavation in Cutting in disintegrated rock not requiring blasting to be removed by pick axes and crow bars and depositing materials within 50m initial lead and 1.5m initial lift including rough dressing as per direction and specification of the department including stacking the useful materials separately as ordered etc as per direction of Engineer - in - Charge.
Cutting in disintegrated rock not requiring blasting to be removed by pick axes and crow bars and depositing materials within 50m initial lead and 1.5m initial lift including rough dressing as per direction and specification of the department including stacking the useful materials separately as ordered etc as per direction of Engineer - in - Charge.
Excavation of founation in laterite rock or any hard rock (other than granite or disintigrated rock) removed by chiselling including dressing and levelling the bed not exceeding 1.5m in depth and depositing the soil within initial lead of 50m and as per specification approved by the Department for 1st Depth
Supplying all materials, labour and T&P for filling approved SAND of specified quality under floors, in foundations, plinths, etc. for all depths and heights including cost of sand, royalties, transportation to site for all leads and lifts,including loading, unloading, spreading in layers all complete as per drawings, specifications and direction of Engineer-incharge.
Supplying all materials , labour & T & P for Painting of M.S. pipe, Gate, Door & windows with 2 coats of enamel paint over a coat of primer including cost of all labour, materials with all taxes, lead ,T&P etc all complete. Window Grill 5x1x1.20x1.20
Supplying all materials,labour and T&P for filling foundation and plinth with excavated materials as per direction of Engineer-in-charge.
RCC Roof slab & chajja
Earth work in all kinds of soil within 50m. initial lead & 1.5m. initial lift including rough dressing & breaking clods to maximum 5cm. to 7cm. & laying in layers not exceeding 0.3m. in depth & as per direction of the engineer–in–charge.
Rigid smooth centring and shuttering for R.C.C. works including false work and dismantling then after casting including cost of materials all complete.
Supplying of all materials, labour T&P for RCC (1:11/2:3) with 12mm size hard granite crusher broken chips for RCC work excluding centering ,shuttering with all cost, conveyance, royalty & taxes etc. all complete as per P.W.D. specification and direction of Engineer-in-charge.
RCC column base /footing
Cement concrete (1:3:6) using 40 mm. size hard granite crusher broken metal including watering and curing including cost, conveyance, royalties and taxes of all materials, labour, T&P etc. complete as directed by Engineer-in charge.
Assuming the qnty of MS reinforcement @ 0.85 qntl/cum
Supplying of all materials, labour T&P for M.S reinforcement for RCC work including cutting, bending, binding, straightening & tying grills and placing in position including cost of binding wire 18 to 20 gauge, M.S. Rod/Tor steel with all cost, conveyance & taxes etc. all complete as per P.W.D. specification & direction of Engineer-in-charge.
12mm thick cement plaster in cement mortar (1:6) in all floors at all height finishing smooth to rough surface of brick walls after raking out the joints including watering and curing, rounding of corners with cost, conveyance, royalties and taxes of all materials and cost of all labour, scaffolding, sundries and T& P. etc. required for the work etc. complete as directed by the Engineer in charge.
Supplying,fitting and fixing in position M.S verandah grill/grill gate/grill door/window grill of approved desing made out of 40mmx40x6mm size M.S.Angles welded with 25ccx6mm size M.S flat including cutting the M.S flat to proper sizes,welding,chamfering and one coat of priming with red oxide and fixing with C.C (1:3:6)including cost,conveyance,royalties,taxes of all materials,cost of all labour,sundries and T&P etc.required for the work complete as directred by the Engineer-in-change.
Finishing wall surface of walls with Acrylic wall putty (Water based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete.
Brick work with Fly ash bricks of 25cmx12cmx8cm. Size having crushing strength not less than 75 Kg/Sqcm. With dimensional tolerance +2%. percentt in cement mortar (1:6) in super structure
Supplying all materials , labour & T & P for Painting of M.S. pipe, Gate, Door & windows with 2 coats of enamel paint over a coat of primer including cost of all labour, materials with all taxes, lead ,T&P etc all complete.
Recessed / Surface wiring to light point / fan point /Exhaust fan point /call bell point with 1.5 sqmm FR PVC insulated single core multi strand copper conductor of ISI marked with 20 mm dia non-m , MS box with 1.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection (Make of wire:-Finolex/L&T /Anchor/ Havells /V Guard/Equivalent make with approval of the authority)
Electric 200mm Exhaust Fan (Havells/ Bajaj/Usha/ Equivalent make with approval of the authority)
Supplying and fitting & fixing of un plasticised polyvinyle chloride (UPVC) casement door - 60 - series duly manufactured using upvc reinforced profile of 60mm x 55mm x 2.5 mm for outer frames, 102mm x 60mm x 2.25 mm for casement door sash profile & 74mm c 60mm x 2,5 mm mullion profile capable of mounting single glazing system , structurally reinforced with hot deep galvanised up to 50 microns of minimum thick ness of 2.0 mm prefabricated & welded through fusion welding the door sash shall be fitted with 12mm thick WPC board of green ply make duly fixed with EPDM weathering seal resistance accessories like clipping locking system made up aluminium -1 No per set of sashes & the system is to be installed at the site using anchor fastener, silicn rubber sealant , easy glazing/ de glazing at site etc including cost & conveyance of all materials accessories labour charges materials and product confirming to ASTM D 638- 14, EN- 477 - 95 & other applicable codes and standards.
Supplying all labour, materials and tools and plants for installation , testing and commissioning of Horizontal Split case centrifugal pump set with Pump rated discharge 48 LPS , Pump rated Head- 35 mtr with Mechanical Seal with Pump material of construction, Casing- Cast iron, Impeller-SS-CF8, Neck ring-SS-CF8, Shaft SS-410, Shsleeves -SS410, stuffing box packing mechanical with Offered motor 22.40 KW/30HP RPM 1500/4 pole , Motor Characteristics 415+- 10%, 50 Hz +_ 5 %, S1 Duty , TEFC-SCR, IP55, IE3 efficiency class insulation class F/B , Ambient temp 50* C confirming to IS/IEC ,with acessories Base frame, coupling, coupling guard, Companion flanges etc all complete as per direction of Engineer in charge
Supply ,Fitting & Fixing of Double door Enclosure system size 1000mmx 1400mmx 400mm
PROCUREMENT, FITTING & FIXING OF SPLITCASE PUMPSET , VFD PANEL , ELECTRICAL CABLES, PLC PANEL & ANCILARY WORKS
Supply ,Fitting & Fixing of MYB4N 24v DC relay
Supply ,Fitting & Fixing of MYB4N relay base
Supply, fitting & fixing of Start Push Buttom
Supply, fitting & fixing of Start Push Buttom No Element
Supply, fitting & fixing of Stop Push
Supply, fitting & fixing of Stop Push Buttom No Element
Supply ,Fitting & Fixing of Indicator 22mm Red ( DC) , 24v DC
Supply ,Fitting & Fixing of Indicator 22mm green ( DC) , 24v DC
Supply ,Fitting & Fixing of Indicator 22mm orange ( DC) , 24v DC
Supply ,Fitting & Fixing of Indicator 22mm Red ( DC) , 220v AC
Supply ,Fitting & Fixing of Indicator 22mm Yellow ( DC) , 220v AC
Supply ,Fitting & Fixing of Indicator 22mm Blue ( DC) , 220v AC
Supply, fitting & fixing of 63Amp 4P contactor
Supply, fitting & fixing of Volt meter
Supply, fitting & fixing of Ammeter meter
Supply , & Commissioning 30KW /40HP VFD with below specification . ambient temperature- 50 °C with out Derating, Humidity- 95 % RH or less (non-condensing), Environmental conditions-IEC 60721-3-3, Class 3CS (chemical gases), Class 3S2 (solid particles),Standards-CE, UL, cUL, EAC, RoHS,Functional safety-Safe Torque Off (STO) according to IEC 61800-5-2,Control inputs- 6 digital , 2 analogue (current/voltage), 1 pulse (HTL, max. 32 kHz)24 Vdc power supply for control cards, Control Output-2 relay, 1 analogue (current/voltage), 1 pulse (HTL, max 32 kHz), Automatic load distribution for multiple axes (droop control),Input Voltage without derating- 380 to 480 Vac +/- 15%, i exist, 60A VFD -1Nos , All switchgear and control gear make-Yas, VFD Make-L&T VF-H400 75BAA. All completed as per electrical specification and as per direction of EIC. (Make: Schneider, Siemens, L&T, ABB/Equivalent make with approval of the authority)
Supply, fitting & fixing of RYB indicator of incoming power
Supply ,Fitting & Fixing of 100 Amp 36 KA DZI model 4 pole MCCB
Supply ,Fitting & Fixing of SPREADER LINK DZ1
Supply ,Fitting & Fixing of Double door Incomer Enclosure system size 1200mmx 1400mmx 400mm
Supplying all materials, labour & T & P for fitting
supply
supplying , fitting & fixing of copper flat bush bar
Providing and laying in trenches unplasticised HDPE pipes conforming to IS: 4984/2016 of Class IV (8 kgf/cm²) of the following nominal bore and pipe fittings including testing as per specification complete. (Earth work in trenches to be measured and paid for separately)
160mm HDPE pipe PE-80
Design, Supply, installation, testing & commissioning and Erection of 3-phase 3-wired 11 KV external electrification works for New UGR Pump-House at NANDAN VIHAR consisting of (but not limited to) 100 m of 11 kV overahead line, 11kV/ 0.433 kV, 100 kVA (ONAN) Oil type distribution transformer (Star-rated) substation including D.P. structure, AB switch,metering, kit-kat Fuse, lightning arresters, 415V distribution box, required nos. of earthing, power and control cables etc. to complete the system in totality as per detailed specifications, including all labour and materials, & other relevant civil work, etc. testing & commissioning with contractor's own test equipment, including stock, storage, erection and transportation, as per approved drawings, Scope of Work, List of Supply & Installation (for reference only), specifications of this tender, State Electricity Board's requirements/ rules, CPWD specifications, IS, Rural Electrification Rules, BIS etc.all complete as per specificatioand direction of Engineer-in-charge.
supplying & laying for 185 sqmm x 3.5 core armoured cable (Make:Finolex/L&T /Anchor/ Havells /V Guard/Equivalent make with approval of the authority)
supplying & laying for 300sqmm x 3.5 core armoured cable (Make:Finolex/L&T /Anchor/ Havells /V Guard/Equivalent make with approval of the authority)
250KVA Transformer 11/0.40 KV pole
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 4.03 MB
DTCN.pdf
Tender Documents • 1.18 MB
BOQ_566299.xls
BOQ • 0.50 MB
Download all tender documents and submit your bid