Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹1.8 LAccepted-AOC | ₹1.8 L Quoted ₹2.2 L | 1 | Accepted-AOC Accept |
| 2 | 2₹2.3 L+₹13,976 (6.43%)Rejected-AOC | ₹2.3 L+₹13,976 (6.43%) | 2 | Rejected-AOC Reject |
| 3 | 3₹2.4 L+₹18,410 (8.48%)Rejected-AOC R O VILL GAUNA P O KAROUR TEHSIL NADAUN DISTT HAMIRPUR H P | HAMIRPUR | HIMACHAL PRADESH | 174304 | ₹2.4 L+₹18,410 (8.48%) | 3 | Rejected-AOC Reject |
| Sl No | Description | Qty | Unit | Vipan Kumar L3 | Sh. Bihari Lal L1 | Jagdish Chand L2 |
|---|---|---|---|---|---|---|
| 1.00Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring, shuttering strutting and propping etc. with wooden batten and ballies, in all heights of propping and centring below supporting floor to ceiling not exceeding 4 mtrs and removal of the same for insitu-reinforced concrete and plain concrete work in :- | ||||||
| 1.01 | Vertical surfaces such as wall (any thickness) partitions and the like including attached pillasters, buttresses plinth and string courses and the like in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge. | 79.05 | Sqmt | 435 ₹34,386.75 | 400 ₹31,620 Lowest | 420 ₹33,201 |
| 1.02 | In flat surfaces with steel plates such as soffits of suspended floors, roofs, landing and the like floor etc upto all thickness in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge. | 7.92 | Sqmt. | 480 ₹3,801.6 | 450 ₹3,564 Lowest | 475 ₹3,762 |
| 2.00Providing and laying cement concrete 1:1.5:3 (1 cement: 1.5 sand: 3 graded crushed stone agg. 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in:- | ||||||
| 2.01 | Walls any thickness but not less than 0.1m thickness including attached pillaster buttresses, plinth and string courses from top of foundation upto two level all floor level as per direction and to the entire satisfaction of Engineer-in-Charge. | 3.91 | Cum | 11,800 ₹46,138 | 11,500 ₹44,965 Lowest | 11,700 ₹45,747 |
| 2.02 | Foundation footings bases of columns and the like; and mass concreteas per direction and to the entire satisfaction of Engineer-in-Charge. | 2.13 | cum | 11,380 ₹24,239.4 | 11,200 ₹23,856 Lowest | 11,350 ₹24,175.5 |
| 2.03 | Suspended floors roofs, landings and shelves and their supports, balconies, beams, girders, bressumers and cantilevers upto floor two level as per direction and to the entire satisfaction of Engineer-in-Charge. | 1.39 | Cum. | 11,650 ₹16,193.5 | 11,500 ₹15,985 Lowest | 11,620 ₹16,151.8 |
| 3.00 | Providing and fixing of 3.15mm MS Sheet Manhole cover 600X600mm fixed on all sides with ISA 40x25x5mm top angle iron frame hinged on ISA 35x35x5mm bottom angle iron frame as per drawing. Pieces of MS Flat 20x4mm, 0.15m long be fixed on all sides as hold fast. The operation of manufacturing shall including cutting of MS Sheet, Angle Section & welding of MS Sheets, Angle Section, Hinges, Handles 150mm long, 20x4mm flats, locking arrangement and applying a priming coat of steel primer after pretreatment of surface to the entire satisfaction of the Engineer-in-Charge. | 1 | Nos | 420 ₹420 | 400 ₹400 Lowest | 415 ₹415 |
| 4.00 | Steel work welded in builtup section, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead painting grating, framed guard bars ladders, railing brackets and similar works as per direction of Engineer-in-Charge upto all lead and lift. | 0.3 | Kg | 135 ₹40.5 | 115 ₹34.5 Lowest | 130 ₹39 |
| 5.00Providing and Laying, jointing and testing in trenches galvanised mild steel tubes Medium class of following dia (the earth work to be measured and for separately). The pipe shall be fully butt welded jointing including carriage or material up to all leads and lifts. | ||||||
Tender Value
₹2.2 L
EMD Value
₹4,480
Closing Date
3 Sept 2025, 5:00 pmClosed
Executive Engineer
JS Division Dharampur Bharari
Deposit work SDF2024939 various LWSS LIS under JSV Section Dharampur in Tehsil Dharampur Distt. Mandi HP
2025_HPIPH_112868_1
5027-5076 dated 23-08-2025
Open Tender
Civil Works
Item Rate
90 days
Dharampur
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Executive Engineer
₹4,480
18 May 2026
25 Aug 2025
4 Sept 2025
25 Aug 2025
3 Sept 2025
25 Aug 2025
Amount
Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring, shuttering strutting and propping etc. with wooden batten and ballies, in all heights of propping and centring below supporting floor to ceiling not exceeding 4 mtrs and removal of the same for insitu-reinforced concrete and plain concrete work in :-
Vertical surfaces such as wall (any thickness) partitions and the like including attached pillasters, buttresses plinth and string courses and the like in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge.
In flat surfaces with steel plates such as soffits of suspended floors, roofs, landing and the like floor etc upto all thickness in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge.
Providing and laying cement concrete 1:1.5:3 (1 cement: 1.5 sand: 3 graded crushed stone agg. 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in:-
Walls any thickness but not less than 0.1m thickness including attached pillaster buttresses, plinth and string courses from top of foundation upto two level all floor level as per direction and to the entire satisfaction of Engineer-in-Charge.
Foundation footings bases of columns and the like; and mass concreteas per direction and to the entire satisfaction of Engineer-in-Charge.
Suspended floors roofs, landings and shelves and their supports, balconies, beams, girders, bressumers and cantilevers upto floor two level as per direction and to the entire satisfaction of Engineer-in-Charge.
Providing and fixing of 3.15mm MS Sheet Manhole cover 600X600mm fixed on all sides with ISA 40x25x5mm top angle iron frame hinged on ISA 35x35x5mm bottom angle iron frame as per drawing. Pieces of MS Flat 20x4mm, 0.15m long be fixed on all sides as hold fast. The operation of manufacturing shall including cutting of MS Sheet, Angle Section & welding of MS Sheets, Angle Section, Hinges, Handles 150mm long, 20x4mm flats, locking arrangement and applying a priming coat of steel primer after pretreatment of surface to the entire satisfaction of the Engineer-in-Charge.
Steel work welded in builtup section, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead painting grating, framed guard bars ladders, railing brackets and similar works as per direction of Engineer-in-Charge upto all lead and lift.
Providing and Laying, jointing and testing in trenches galvanised mild steel tubes Medium class of following dia (the earth work to be measured and for separately). The pipe shall be fully butt welded jointing including carriage or material up to all leads and lifts.
125 mm dia GMS pipe Class (MC)
Providing circumferencial Butt welded joints by electrical arc welding to following dia GMS Pipes welded in requisite number of weld runs including thread cutting so as to achieve the minimum effective throat thickness of weld conforming to IS 816-1969 specifications, by using welding electrodes of 2.5mm to 6.3mm of Advani Oerlikon (Adore)- CITOJET/ESAB make, conforming to IS 814-1991, at site of work complete in all respects, including manual/mechanical handling of pipes in all leads and lifts to the entire satisfaction of Engineer-in-Charge. (125mm MC)
Providing laying of Tor steel reinforcement for RCC work including bending binding and placing in position including wire upto all floor level as per direction and to the entire satisfaction of Engineer-in-Charge.
Providing and supplying of double flanged Cast Iron Sluice valve of Kirloskar/ Leader /Kartar/Bir make of 80 mm dia of Class PN-1 to with stand a seat presure of 10.20 Kg/cm2 with standing nominal Seat pressure as per IS:780-1984 (P1) including companion flange of Table-5 with upto date ammendments as per direction and to the entire satisfaction of Engineer-in-Charge.
Jagdish Chand (BID ID -549056)
Vipan Kumar (BID ID -549835)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.69 MB
Form6.pdf
Tender Documents • 0.83 MB
Form8.pdf
Tender Documents • 1.29 MB
BOQ_164570.xls
BOQ • 0.28 MB
TC.pdf
Tender Documents • 0.14 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .