REPAIR AND RECARPETING OF ROADS AND BERMS IN CERTAIN UNITS OF EME SCHOOL AND STN HQ IN SECTOR A AND B UNDER GE (A) BARODA

Amount

Material and labour for repairs to pot holes any depth, not exceeding 1.00 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths cutting around edges to at least 25mm in depth, making good by filling in screened and graded road metal watering and well ramming (including supply of road metal) and rolled and compacted to required gradient and camber using 8 to 12 tonne power roller complete all as specified and as directed.

Material and labour for preparing black top surfaces by brushing with wire brushes for removing cacked mud, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt and appying evenly one priming tack coat with bituminous primer VG-10 Grade @ 05 Kg/ 10 Sqm complete all as specified and as directed.

Material and labour for bituminous premixed asphaltic semi dense concrete 30mm consolidated/ compacted thickness using hot mix plant and mechanical paver with 5.5% (paving bitumen VG-30 Grade) binder content by weight of total mix, rolled and compacted using 8 to 12 tonne power road roller to required camber and gradient complete to a uniform surface all as specified and as directed.

Material and labour for preparing existing unsurfaced WBM surfaces by brushing with wire brushes for removing caked mud, scarifying or picking up gravelled macadam/ bituminious macadam in area exceeding 400 sqm and not exceeding 50mm deep, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt and applying evenly one priming/ tack coat with paving bitumen at 80/100 (VG-10) grade @ 10 Kg per 10 sqm for below BM surfaces complete all as specified and as directed.

Material and labour for premix bituminous macadam with 4% binder content (paving bitumen) laid/ rolled and compacted to required gradient and camber (consolidated thickness not exceeding 50mm) complete all as specified and as directed.

Material and labour for Marking strips, straight lines, zebra crossing and straight lines not less than 2 to 2.5mm thick and exceeding 10 cm width with hot applied thermoplastic road marking paint of approved brand (White or yellow) by using automatic mechanical road painting machine with 8% glass beads (intermixed) complete all as specified and as directed by Engr-in-Charge.

Supply and fixing of cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and including mild steel stud of suitable size as per manufacturers instructions complete all as specified and as directed.

Supply and fixing of metal tubular delineator made out of ABS round body fitted with 2 Nos 65mm dia highly reflective reflectors made out of PMMA and mounted on 45/ 50mm dia mild steel pipe of 600mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25mm wide strips with anti theft steel net for reflector protection including embedding in PCC (1:2:4) type B1 (using 20mm graded stone aggregate) of size 150mm x 150mm x 300mm complete all as specified and as directed.

Supply and fix of solar cat eye aluminium alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4 V/ 0.3 Watt one NI-ed rechargeable battery (1.2 V/ 1600 MA) consisting of super bright LED with 10,000 to 18,000 mcd complete as per manufacturers instructions complete all as specified and as directed.

Material and labour for moorum in road side berms, spread thickness 75mm, spreading consolidating as required and rolled with power roller complete all as specified and as directed.

City Light (BID ID -3202720)