REPAIR / MAINTENANCE OF EXTERNAL WATER SUPPLY SYSTEM, FILTER MEDIA AND ALLIED WORKS OF PUMPING SYSTEM AT NAGPANI, HIGHEST POINT AND ENTIRE AREA OF CHAUBATTIA UNDER GE RANIKHET

Amount

BOQ ( Sch A ) water suply works Excavation in trenches not exceeding 1.50M wide and not exceeding 1.5M depth in hard/dense soil and getting out for laying pipes, cables etc and fitting including forming bottom surface to required level and slope complete all as specified and directed.

Returning, filling in, trenches including spreading, leveling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed.

Removing surplus soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above starting point complete all as specified and directed..

Taking up or down 100 mm bore unserviceable water tubing and connection from trenches, walls, on open surface including cleaning for refixing and removal from site complete all as specified and dircted

All as per item No 4 here in before but bore of pipe 80 mm

All as per item No 4 here in before but bore of pipe 50 mm

All as per item No 4 here in before but bore of pipe 40 mm

All as per item No 4 here in before but bore of pipe 25 mm

All as per item No 4 here in before but bore of pipe 20mm

Supply and fixing Steel water tubing medium grade galvanised with and including all GI fittings (such as bend,elbows,tees, connections, short pieces, back nuts, unions, caps & plugs etc) laid in trenches, fixed on walls or on open surfaces bore of pipe 80mm complete all as specified and directed.

All as per item No 10 here in before but bore of pipe 50 mm

All as per item No 10 here in before but bore of pipe 40 mm

All as per item No10 here in before but bore of pipe 25mm

Laying/fixing only Steel water tubing medium grade galvanised with and including S&F of all GI fittings (such as bend,elbows,tees, connections, short pieces, back nuts, unions, caps & plugs etc) laid in trenches or on open surfaces bore of pipe 100mm complete all as specified and directed. (Note:- GI pipe shall be issued under Sch 'B' free for fixing only.)

All as per item No 14 here in before but bore of pipe 40 mm (Note:- GI pipe shall be issued under Sch 'B' free for fixing only.)

All as per item No 14 here in before but bore of pipe 20 mm (Note:- GI pipe shall be issued under Sch 'B' free for fixing only.)

Taking out old unserviceable sluice valve for replacement and supply, fixing , testing and commencing of sluice valve 150 mm dia of cast iron body flanged and drilled as per ISI 14846 (ISI Marked) specifications class PN-1.6 with stainless nuts,bolts, washers & fibre/rubber gasket steel spindle complete all as specified and directed.

All as per item No 17 here in before but 100 mm dia

All as per item No 17 here in before but 80 mm dia

Taking out old unserviceable gun metal, globe or gate valve and Supply and fixing gun metal, globe or gate valves ISI marked class-I, with iron wheel head, screwed both ends, for iron pipe bore dia of pipe 50mm complete all as specified and directed.

All as per item No 20 here in before but 40 mm dia bore

All as per item No 20 here in before but 25 mm dia bore

All as per item No 20 here in before but 20 mm dia bore

All as per item No 20 here in before but 15 mm dia bore

Material and Labour for repairs to existing leaking joints (flanged/socketed/collar) upto 50 mm bore GI pipe line including supply and replacement of flanged/socket/union /reducer etc with and including all necessary GI nut bolts, fibre/rubber gasket sheet and welding work wherever required, to make the joints leak proof including necessary cutting threading etc,including necessary excavation work complete all as specified and directed.

Material and Labour for repairs to existing leaking joints (flanged/socketed/collar) for 80 mm bore GI pipe line including supply and replacement of flanged/socket/union /reducer etc with and including all necessary GI nut bolts, fibre/rubber gasket sheet and welding work wherever required, to make the joints leak proof including necessary cutting threading etc,including necessary excavation work complete all as specified and directed.

Material and Labour for repairs to existing leaking joints (flanged/socketed/collar) for 150/100 mm bore GI pipe line including supply and replacement of flanged/socket/union /reducer etc with and including all necessary GI nut bolts, fibre/rubber gasket sheet and welding work wherever required, to make the joints leak proof including necessary cutting threading etc,including necessary excavation work complete all as specified and directed.

Taking out/ Disconnecting of existing NRV and supply, fixing, jointing and testing 150mm dia cast steel Non Return Valve, class 300 ASA, flanged and drilled both ends with gun metal seat and making bypass arrangement flanged type complete with & including flanges,fibre sheet gasket, nut-bolts & washers complete all as specified and directed

All as per item No 28 here in before but 100 mm dia bore

All as per item No 28 here in before but 80 mm dia bore

Taking up or down existing GI steel water tubing of any grade 150mm bore including all fittings and accessories from trenches/open surfaces, Filtration plant including replacement of old damaged pipes,cleaning ,re-threading the old threads, cutting, welding work, etc as required and re-fixing the same after necessary repair works, etc as required , including new GI fittings and accessories as required in new or old position including necessary excavation & earth work complete all as specified and directed

All as per item No 31 here in before but 100 mm bore of pipe

All as per item No 31 here in before but 80 mm bore of pipe

All as per item No 31 here in before but 50 mm bore of pipe

All as per item No 31 here in before but 40 mm bore of pipe

All as per item No 31 here in before but 25 mm bore of pipe

Demolition of existing unserviceable masonry valve pit including all accessories like angle iron frame, door fixed with MS sheet cover etc amd Material & Labour for construction of brick masonery valve pit of size 610x610x610mm (internal dimensions) with brick work of sub class 'B' old size bricks built in cement morter 1:4 and 10mm thick rendering on internal and exposed external surface and including 40x40x6mm mild steel angle frame 3.15mm thick mild steel sheet cover in two Nos shuitters with handle and locking arrangement and 1 Nos 50mm size 4 levers lock with key in duplicate make Navtal including painting steel and iron surfaces with two coats of black bituminous paint over a coat of red oxide primer complete all as specified, shown on drawing and as directed.

All as per item No 37 here in before but of size 1050x1050x900 ( internal size)

Material & Labour for Cleaning of pressed steel/iron water storage tank of capacity 80000 gallon capacity at Nagpani from inside, extraction of all mud/sand/dust/algee deposits, making it free from algee growth by scrapping, washing with water and finally cleaning with bleaching powder including general painting with synthetic enamel green paint outside of tank and Writing the date of cleaning at a prominent place complete all as specified and as directed by Engineer-in-Charge.

Material & Labour for Cleaning of pressed steel/iron water storage tank of capacity 38000 gallon capacity at highest point from inside, extraction of all mud/sand/dust/algee deposits, making it free from algee growth by scrapping, washing with water and finally cleaning with bleaching powder including general painting with synthetic enamel green paint outside of tank and Writing the date of cleaning at a prominent place complete all as specified and as directed by Engineer-in-Charge.

Material & Labour for Cleaning of pressed steel/iron water storage tank of capacity 20000 gallon capacity at Nagpani from inside, extraction of all mud/sand/dust/algee deposits, making it free from algee growth by scrapping, washing with water and finally cleaning with bleaching powder including general painting with synthetic enamel green paint outside of tank and Writing the date of cleaning at a prominent place complete all as specified and as directed by Engineer-in-Charge.

Material & Labour for Cleaning of pressed steel/iron water storage tank of capacity 10000 gallon capacity at Chaubattia from inside, extraction of all mud/sand/dust/algee deposits, making it free from algee growth by scrapping, washing with water and finally cleaning with bleaching powder including general painting with synthetic enamel green paint outside of tank and Writing the date of cleaning at a prominent place complete all as specified and as directed by Engineer-in-Charge.

Complete cleaning of masonry water storage reservoir 5 lacs gallons capacity at Chaubattia from inside, extraction of all dust/sand/mud/Algee deposits, making it free from algee growth by scrapping with brush, washing with water cleaning of all MS /iron/wooden frame work inside and roof of the reservoir & general cleanliness of the outside surface/area surrounding of the all plastered internal surface (excluding floor) of the tank & two coats of approved make & shade of snowcem on all sides of the tank & two coats of approved make & shade of snowcem of all sides of the outside of the tank including necessary painting with one coat of black bituminous paint on all steel /iron surface of tank over black paint of size 2.5 fit x 1.5 fit including marking of tank capacity and date etc of cleaning complete all as specified and directed

All as per item No 43 above but 3 lacs gallons capacity at Chaubattia

All as per item No 43 above but 420,00 gallons capacity at Highest point

All as per item No 43 above but 50,000 gallons capacity at Chaubattia

Supply and fixing coupling male and female with shaft allignment for pumping set 100 HP size as per existing complete all as specified and directed.

Supply and fixing coupling male and female with shaft allignment for pumping set 12.5 HP size as per existing complete all as specified and directed.

Supply and fixing pump bearing for 100 HP pumping set pump as per existing make/sample complete all as specified and directed

Supply and fixing pump bearing for 75 HP pumping set pump as per existing make/sample complete all as specified and directed

Supply and fixing pump bearing for 12.5 HP pumping set pump as per existing make/sample complete all as specified and directed

Supply and fixing coupling nuts, bolts and washer for pumping set 40/75/100HP size as per sample complete all as specified and directed..

Supply only Calcium Hypo chlorite 65% to 70% chlorine content in granular and tablet form in packing of drum of 45 kg Brand Name: Puri Chlor of M/S Sree Rayalaseema Hi-Strength Hypo Ltd or equivalent Make & brand as mentioned in latest approved list of E-in-C Br New Delhi and HQ Chief Engineer Central Command complete all as specified and directed

Supply only 4 mm thick fiber sheet complete all as specified and directed.

Supply only 6 mm thick fiber sheet complete all as specified and directed.

Supply only 3mm thick leather packing sheet used in GI tubing connection complete all as specified and directed.

Supply & Fixing copper finger suitable for oil immersed starter 100 HP complete all as specified and directed.

Supply & fixing Thermostat with tempreture autocut , 240 volt for water heater , complete all as specified and directed.

Supply & Fixing copper gutka suitable for oil immersed starter 100 HP complete all as specified and directed.

Supply & Fixing PVC insulated unsheathed copper conductor 1100 volt industrial cable 50 sqmm multi stranded single core, including connecting with copper lugs 50/95 sqmm with incoming & outgoing feeder starter to motor connector complete all as specified and directed.

Supply and fixing coupling rubber washer as per sample complete all as specified and directed

Material & Labour for connecting copper lugs 95 Sqmm with incoming & outgoing feeder starter to motor connector complete all as specified and directed

Supply only Bleaching powder complete all as specified and directed.

Material & labour for connecting and testing of CI air release valve 50mm size wioth ISI marked flanged type including material such as fibre board, nut , bolt , washer and welding etc complete all as specified and directed.

Material & labour for connecting and testing of CI air release valve 40mm size wioth ISI marked flanged type including material such as fibre board, nut , bolt , washer and welding etc complete all as specified and directed.

Supply & fixing galvanised iron ISI marked heavy duty drilled flanged suitble for 80 mm bore pipe line complete all as specified and directed.

Supply & fixing galvanised iron ISI marked heavy duty drilled flanged suitble for 100 mm bore pipe line complete all as specified and directed.

Supply & fixing galvanised iron ISI marked heavy duty drilled flanged suitble for 150 mm bore pipe line complete all as specified and directed.

Material & labour for Dismantling existing unserviceable 3 phase, 415 volt, 12.5 HP cap motor instaled at chubattia electrically and mechanically from foundation and transporting to Haldwani for rewinding with suitable size of copper enameled wire with all accessories incl varnishing, testing, transporting back and refixing commissioning and testing complete all as specified and directed.

Supply and fixing in replacement pressure pump of 1 HP, single phase, 230 volt, 50 HZ, 2800 rpm, head 25 mtr discharge 30lpm, size 25x25mm, with oressure tank as per maufacturer instruction complete all as specified and directed. Make :- Jyoti, crompton Greaves, KSB

Suppy and fixing in replacement 3 phase, direct on line starter for 10 HP centrifugal pump set, fully automatic at Chaubattia Nagpani complete with all accessories including connecting, commissioning and testing of complete all as specified and directed. Make:- L&T cat part No SS94351 MN 16 DOL or equivalent cat part in make specified in appendix 'A' of particular specification.

Material & Labour for preparation of existing old untreated CGI/PGI sheet roof surface of any description not otherwise described over 10 cm width or girth by cleaning , removing dust and including washing and cleaning etc to receive painting and making good with red lead wherever required and applying two coats of roof paints ( Coptic of Jenson & Nicholsan or Antisol of Berger or equivalent make as specified in appendix 'A' of particular specification) complete all as specified and directed.

Material and labour for preparation of old painted steel surfaces of any description, not otherwise described,over 10 centimetre width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Writing letters or figures (Block Roman, Italic or Indian) n exc. 30 cm high incl preparation of surface and making the base to receive letters by applying synthetic enamel paint. Letters etc shall be paint with thick paint complete all as specified and directed.

Taking out old unserviceable Water level indicator and supply and fixing FRP scale conventional / Mechanical water level indicator complete with float, wire, float guide pipe , bracket & pulley, counter weight, indicator pin, etc including all accessories all as specified and as directed

Material and labour for chart/ poster/ diagram / name plate etc made out of perpex sheet 2 mm thick, cut to size and shape with colour background and diagram and letters including fixing arrangement with screws / adhesives as required complete all as specified and directed by Engineer in charge. Note: The content and size of chart/ poster /diagram / name plate etc shall be given by the Engr in charge during execution of work.

Material and labour for repair to electrically driven centrifugal pump set ( 100 HP motor-pump set ) including servicing , cleaning and replavement of water body , kit seal cup , screw ring retainer and burnt out nut, bolts etc of any size complete all as specified and directed.

Supply Water testing solution O-TOLODINE bottle 500 ML complete as directed and as approved by Engnr-in-Charge.

Material & Labour for notice board of size 50x20 cm and written as "OUT OF BOUND FOR ALL RANKS ", made from 1.6mm thick mild steel sheet, vitreous enameled white, with letters, figures and conentional skull and bones in signal red colour and fixed with MS clamps, bolt and nuts of approved size complete all as specified and directed.

Material & Labour for notice board of size 50x20 cm and written as "NO ADMISSION ", made from 1.6mm thick mild steel sheet, vitreous enameled white, with letters, figures and conentional skull and bones in signal red colour and fixed with MS clamps, bolt and nuts of approved size complete all as specified and directed.

Collecting samples of under ground sump water from chaubattia UG Sump 5 lacs, 3 lacs, Highest point pump house for Bacteriological testing and complete Chemical testing for parameters as specified. Note : The bacteriological and chemical testing of water shall be carried out in Govt authorised laboratory . The item cost includes collecting of samples of water from UG sump and Pump house site and charges of Govt authorised laboratory for carrying out testing of water sample.

Supply and fixing mild steel framed work such as grills, gratings etc with ends of bars soldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks, mokey caging, and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed

Surface dressing n.exc 15 cm deep incl as in any type soil including taking out all sapling shrubs, brushwood, undergrowth, roots, and trees n. exc 30 cm girth all removing to a distance n.exc 100 m from starting point complete all as specified and directed by Engr-in-charge (The area is to be carried out in and around,structches viz transformes, water reservoirs, around power house and other E/M installation complete all as specified and directed

aditya construction

M/S NAYAL ELECTRICALS

kumar automobiles