32/EE(E)R/L/2025-26 (2ND CALL)

SITC of Feeder Pillar Medium Size (950mmx430mmx2000mm) fabricated out of MS sheet Steel of 3.15mm thickness and to be used as electrical distribution feeder pillar suitable for 415V, 50HZ, AC supply 3- phase & 4 wire system for installation on road/footpath including required civil work/foundation as per enclosed drawing & Specifications. Following items to be fixed in feeder pillars: - 1. Electrolytic aluminum bus-bar grade 6101 for phase of length 800mm size (50x10) mm-3 nos. 2. Electrolytic aluminum bus-bar grade 6101 for Neutral of length 700mm size (25x5) mm-1 nos. 3. Vertical HRC Fuses base (DIN type) switching system 400 Amp -6nos & 250 Amp 18 nos. with 415V rating, 50HZ, AC supply 3- phase & 4 wire system with Copper terminal. 4. Connection of existing cables with suitable size of Aluminium lugs at Fuse base. 5. MNX 110 Amp. Contractor of L & T make with astronomical Timer for automatic switch ON/OFF street supply as per required. 6. Making of line diagram inside the door of the pillar using white paint. 7. Pillar will be painted green outside & Black inside with white logo of NDMC to be printed on front of the door including embarrassing/writing of pillar number at face of the door as required. 8. Earthing terminal on both side of the pillar. 9. Making of Suitable foundation of pillar with masonry work as site requirement. 10. Danger Board 440V to be fixed. Make of base: Siemens or equivalent

Dismantling of existing feeder pillars including disconnection of cable and cart to R/L enquiry.

Earthing with G.I. earth pipe 4.5 mtr. long, 40 mm dia including accessories and providing without masonry work with charcoal/coke and salt as required

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Less: Credit of old dismantling pillars