RENOVATION OF COMMAND & CONTROL CENTRE AT TRANSPORT HOUSE, JAMALPUR, AHMEDABAD

Bill of Quantities

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Carefully dismantling existing wall panelling and

associated framework, including removal,

disposal of debris and site clearance, complete as

directed by the Architect.

Carefully dismantling existing ceiling, including

2 removal, disposal of debris and site clearance, SQ.M 273.57 50.00

complete as directed by the Architect.

Dismentaling of wooden floors including stacking

3 serviceable materilas and disposal of SQ.M 96.98 70.88

materials with all lead and lift.

Dismentling wood work, wrought framed and

in frames trusses including stacking the materials

with all lead and lift.

Dismentling steel work including distempering

stacking the materials with all lead and lift.

Dismentling doors, windows, ventilators etc.

or steel) shutters including chowkhats

holdfasts and other attachment etc. complete

stacking them within all lead and lift.(i) Not

exceeding 3 Sq.M. in area. .

Removing and scraping of old deteriorated

of any thickness fromm wall / R.C.C member

7 including stacking of serviceable material and SQ.M 38.00 19.38

disposal of unserviceable from site of work with

Carefully dismantling existing AC's as directed by

Carefully dismantling and removing existing

stepped flooring, including floor finish, screed,

risers, treads and associated materials, complete

with disposal of debris, surface cleaning and

preparation for new flooring work, as directed by

Providing 15mm thick cement plaster in single

on Rough (Similar)side of single or half brick walls

10 for interior plastering upto floor two level and SQ.M 38.00 155.61

finished even and smooth in (ii) Cement mortar

(1-cement :4-sand)

Providing 20mm thick cement plaster in single

on single or half brick walls for interior plastering

upto floor two level and finished even and

in (iii) Cement mortar 1:6 (1-cement:6-sand)

Scraping oil paint from steel and other metal

12 surface and making the surface even (with SQ.M 10.00 48.83

Hand Scraping.)

Removing dry or oil bound distemper by a

washing and scraping and sand papering the

wall surface smooth including necessary

repairs to scratches complete.

White washing with lime on wall surface (two

coats) to give an even shade including

14 thoroughly booming the surface to remove all SQ.M 216.00 12.29

dirt, dust; mortar drops and other foreign

Extra over on above items for every

15 subsequent coat of white washing with lime on SQ.M 216.00 5.67

Extra over item for white washing with lime on

ceilings and/or sloping roofs.

Extra over Item for every subsequent coat of

17 white washing with lime on ceilings and/or SQ.M 10.00 0.48

Applying two coats of putty & two coats of

primer of approved brand and manufacture on

new wall surface to give an even shade

including thoroughly brushing the surface free

from mortar dropping and other foreign matter

and sand papered smooth.

Wall Painting (two coats) with plastic emulsion

paint of approved brand and manufacture and of

shade required on undecorated wall

surfaces to give an even shade, over and

including a priming coat with alkali resistance

primer of approved brand and manufacture

after thoroughly brushing the surface free from

mortar droppings, and other foreign matter

and also including preparing the surface even

and sand -papered smooth

Extra over item for every subsequent coat of

20 wall painting with plastic emulsion pain of SQ.M 489.57 33.39

approved brand.

Extra over above item for every subsequent

21 coat on ceilings and sloping roofs painting with SQ.M 489.57 5.36

plastic emulsion paint of approved brand.

Painting one coats (excluding priming coat) on

previously printed steel and other metal

surface with synthetic enamel paint, brushing

to give an even shade including cleaning the

surface of all dirt, dust and other foreign

Painting Two Coat (Excluding Priming Coat) On

Previously Painted Wood And Wood Based

Surfaces With Enamel Paint To Give Even

Shade Including Cleaning Of All Dirt, Dust And

Other Foreign Matter.

Carrying out timber treatment to all wood work

including drilling holes and spraying oil based

chemical solution on surface of timber work for

termite control including labor and material etc.

complete. Using Chlorpyriphos20 EC as per

2013 Part III (1% concentration by mass) is

recommended one litre chemical emulsion

with 19 liters of kerosene. Total diluted

concentration will be 20 liters inclusive of 1 liter

chemical emulsion application in drilled holes

0.75 / Litre chemical per one Sqmt two coat on

wood surface not protected by paint or varnish.

Providing and applying smooth wall punning

using white cement-based putty of approved

make over prepared wall surfaces, including

25 surface preparation, filling of minor undulations, SQ.M 216.00 400.00

finishing and curing, complete as per

manufacturer's specifications and Architect's

Providing and fixing false ceiling comprising

approved gypsum board/acoustic ceiling panels

on GI framework suspended from the structural

26 ceiling, including all necessary sections, hangers, SQ.M 273.57 900.00

supports, joint treatment, cut-outs for services,

finishing, labour and installation, complete as per

Architect's instructions.

Providing and laying CAT-6 UTP data cable

including conduits, accessories, I/O outlets,

27 connectors, termination, testing and nos 52.00 900.00

commissioning, complete as per approved

drawings and specifications.

Providing, fixing, testing and commissioning 5A

modular switch and 5A socket outlet complete

28 with, screws and accessories, including making nos 185.00 100.00

good the disturbed surface, complete as directed

by Engineer-in-Charge.

Providing, fixing, testing and commissioning 5A

modular switch ,complete with, screws and

29 accessories, including making good the disturbed nos 65.00 60.00

surface, complete as directed by Engineer-in-

Providing, fixing, testing and commissioning 16A

modular switch and 16A socket outlet complete

30 with, screws and accessories, including making nos 17.00 200.00

good the disturbed surface, complete as directed

by Engineer-in-Charge.

Providing and fixing 1-module modular switch

board complete with concealed GI/PVC box,

mounting frame, modular front plate, fixing

screws and accessories, including cutting, chasing

and making good the wall surface, complete in all

respects as directed by the Engineer-in-Charge.

Providing and fixing 2-module modular switch

32 board complete with concealed GI/PVC box, nos 3.00 170.00

mounting frame, modular front plate, fixing

accessories and necessary hardware, complete in

Providing and fixing 3-module modular switch

board complete with concealed GI/PVC box,

33 mounting frame, modular front plate, fixing nos 3.00 240.00

screws and accessories, including making good

the disturbed surface, complete in all respects.

Providing and fixing 4-module modular switch

board complete with concealed GI/PVC box,

34 mounting frame, modular front plate and all nos 5.00 251.00

fixing accessories, complete as specified and

Providing and fixing 8-module modular switch

board complete with concealed GI/PVC box,

mounting frame, modular front plate, fixing

35 screws, accessories and all necessary hardware nos 22.00 310.00

for accommodating switches, sockets, regulators

and other modular devices, complete in all

Providing and fixing 12-module modular switch

board complete with heavy-duty concealed

GI/PVC box, mounting frame, modular front

36 plate, fixing screws, accessories and all necessary nos 38.00 290.00

hardware for accommodating modular electrical

accessories, complete as specified and directed

by the Engineer-in-Charge.

Approved make ELCBs / RCCBs conforming to IS:

12640 and having sensitivity of 30 mA and Short

Circuit withstand capacity of 6 KA and suitable for

operation on single phase 240 V. having

37 characteristic of quick action & tripping with all nos 5.00 1950.00

advance feature & do not incorporate any

electronic component. for following Max. rating

erected as directed (i) 25 Amps.DP Cat. III

complete as per Site Incharge instructions.

Approved make ELCBs / RCCBs conforming to IS:

12640 and having sensitivity of 30 mA and Short

Circuit withstand capacity of 6 KA and suitable for

operation on single phase 240 V. having

38 characteristic of quick action & tripping with all nos 5.00 2628.00

advance feature & do not incorporate any

electronic component. for following Max. rating

erected as directed (i) 63 Amps.DP Cat. III

complete as per Site Incharge instructions.

Mains with 1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in

following type of pipe to be erected concealed in

/flushed on wall/ceiling, with 1.5 sq. mm copper

39 conductor FRLS PVC insulated stranded wire of Mtr 1200.00 59.00

green colour for earth continuity of following size

(a) with medium class Rigid PVC pipe and

accessories (a) 2 wire 1.5 sq. mm complete as

per Site Incharge instructions.

Mains with 1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in

40 following type of pipe to be erected concealed in Mtr 1000.00 78.00

/flushed on wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of

green colour for earth continuity of following size

(a) with medium class Rigid PVC pipe and

accessories (B) 2 wire 2.5 sq. mm. complete as

per Site Incharge instructions.

Mains with 1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in

following type of pipe to be erected in / on wall /

ceiling with 2.5 sq. mm copper conductor FRLS

41 PVC insulated stranded wire of green colour for Mtr 180.00 106.00

earth continuity of following size. (a) with

medium class Rigid PVC pipe and accessories

(A) 2 wire 4 sq. mm .complete as per Site

Incharge instructions.

Providing and erecting Sheet Steel powder

coated MCB distribution board - flush / surface

mounted fitted with busbar, neutral link, earth

bar and DIN rail, confirming to IS 13032 and BS

5486-1986 without MCB to house appropriate

nos. of MCBs N) Three phase 6 way SS Double

door for horizontal single phase outgoing.

complete as per Site Incharge instructions.

Providing and fixing 6" dia- 12W COB lights-

43 4000k ,, complete as per approved drawings and nos 40.00 800.00

Providing and fixing 6" dia- 18W COB lights-

44 4000k ,, complete as per approved drawings and nos 8.00 1000.00

Providing and fixing 26W LED recessed/surface

mounted panel light of size 600 mm × 600 mm

(24" × 24"), comprising CRCA powder-coated

housing, high-transmission diffuser, energy-

efficient LED module, and electronic constant-

current driver.

provide & fiting Suspended 3" Profile Light is a

modern linear LED pendant luminaire

manufactured from an extruded aluminum

profile with an opal diffuser, suspended from the

ceiling using adjustable steel suspension cables

with,12 W, 4000K,CRI > 90,UGR < 19,Black

powder-coated profile,Opal diffuser,Dimmable

Providing and fixing FRLS PVC cable

raceway/trunking of size 100 mm × 50 mm

including base channel, snap-on cover,

47 internal/external bends, junctions, end caps, RMT 114.00 500.00

fixing accessories with screws and rawl plugs,

suitable for electrical/data cable management,

complete as directed by Architect/Engineer.

Reinstalling, testing and commissioning existing

air-conditioning indoor and outdoor units,

including providing and fixing new insulated

copper refrigerant piping, condensate drain

48 piping, control wiring, power cabling, supports nos 8.00 9500.00

and all necessary accessories, complete in all

respects as per approved drawings and

manufacturer's specifications. complete as per

Site Incharge instructions.

49 Providing and fixing of 2.2 Ton Inverter Split Air nos 4.00 97300.00

Conditioner (R-32 refrigerant preferred)

complete with indoor unit, outdoor condenser

unit, copper refrigerant piping, insulation, drain

pipe, electrical interconnections, and

commissioning, including all necessary

accessories and testing as per manufacturer’s

guidelines. complete as per Site Incharge

instructions. Make- Mitsubishi heavy Duty,

Daikin, Blue Star

Providing and fixing 35 mm thick main entrance

door withAluminium frame, flush door shutter

finished with approved laminate/veneer,

complete with SS hinges, mortise lock, pull

50 handle, door closer, floor stopper and all nos. 1.00 18650.00

necessary hardware, including

polishing/finishing, fixtures, labour and

installation, complete as per Architect's

Providing and fixing 35 mm thick Door for Server

with Aluminium frame, flush door shutter

finished with approved laminate/veneer,

complete with SS hinges, mortise lock, pull

51 handle, door closer, floor stopper and all nos. 1.00 13500.00

necessary hardware, including

polishing/finishing, fixtures, labour and

installation, complete as per Architect's

Providing and fixing wall panelling in Suggested

area, clad with 18 mm thick Commercial grade

plywood finished with approved

laminate/Veneer. as per architect

Providing and fixing wall panelling for mounting

display screens in Command & Control Room,

comprising structural framework of Aluminium

53 sections of approved size and thickness, duly sq.m. 19.95 5000.00

treated with anti-corrosive primer and paint, clad

with 18 mm thick BWP grade plywood finished

with approved laminate.

Providing and fixing wooden Partition for All

Rooms made with 50mm x 50mm Aluminium

Framing, both side finished with 12mm Ply wood

and 1mm Laminate as per architect

Providing and fixing Partition 3" Thk full height

partitions made out of 16 gauge Aluminium

Framing of 50 mm X 50 mm (with 12 mm Glass)

at 600 mm Centre to Centre both ways (vertically

& horizontally). The frames must be rigidly fixed

to the floor / walls & ceiling slabs. The frames

55 must be rigidly fixed to the floor / walls/ ceiling. sq.m. 46.05 6000.00

The 16 gauge aluminium angle cleats shall be

used for joinery with aluminium metal screws.

The aluminium framing shall be covered with

12mm thk. MR Ply of approved make finished in

1 mm thk laminate of approved make & shade on

both sides as per the design / drawing.

Supply and installation of powder-

56 coated/anodized aluminium sections of approved sq.m. 33.89 6500.00

make and profile, fixed vertically and horizontally

as required, including necessary brackets, cleats,

fasteners, screws, anchors, EPDM gaskets, rubber

beading and accessories. Partition shall be fitted

with 12 mm thick clear toughened glass (or as

specified in drawings), machine-cut and polished

at edges, fixed in aluminium frame using

approved glazing system. Work shall include

silicone sealing, alignment, levelling, finishing,

protection during execution, and cleaning after

Providing and fixing command room table of size

1200 mm × 750 mm × 750 mm, comprising

mm thick top finished with 6 mm thick back-

painted toughened white glass, and 50 mm thick

base, including integrated power, data, HDMI

and USB charging points, concealed cable

management system, wire conduits, cable trays,

all necessary hardware, fittings and accessories.

Providing and fixing conference table Of size

5000m x 1200m x 750m, comprising 25 mm thick

top finished with 6 mm thick back-painted

toughened white glass, and 50 mm thick base,

integrated power, data, HDMI, USB charging

points, concealed cable management system,

wire conduits, cable trays, and all necessary

accessories complete.

Providing and fixing expert table Of size 1650m x

900m x 750m, comprising 25 mm thick top

finished with 6 mm thick back-painted toughened

white glass, and 50 mm thick base, integrated

power, data, HDMI, USB charging points,

concealed cable management system, wire

conduits, cable trays, and all necessary

accessories complete.

Providing and fixing main cabin table Of size

1800mm x 750mm x 750mm, comprising 25 mm

thick top finished with 6 mm thick back-painted

toughened white glass, and 50 mm thick base,

60 integrated power, data, HDMI, USB charging nos. 1.00 28850.00

points, concealed cable management system,

wire conduits, cable trays, and all necessary

accessories complete. complete as per Architect

Supplying of 6' Sofa for Waiting Area as per

Selection of Architect

Supplying Chairs for Main Cabin as per Selection

(Midium back revolving chair having denim blue

color, 12 mm BWR grade ply, L ply frame, 45 mm

mold sheet back, fibre base27" custer(Nylon),

Hidrolic Mechanism etc comp. As per sample

approved by department.)

Supplying Boss Chair for Main Cabin as per

Selection of Architect

Supplying Chairs for Expert Room, Conference

Room & Command Room as per Selection

64 (Midium back revolving chair having denim blue nos. 45.00 5100.00

color, 12 mm BWR grade ply, L ply frame, 45 mm

mold sheet back, fibre base27" custer(Nylon),

Hidrolic Mechanism etc comp. As per sample

approved by Archiect.)

Providing, fabricating and erecting

stepped/tiered seating platform for command

room, comprising MS square/rectangular hollow

section framework with necessary bracings,

anchor fasteners and supports, overlaid with

mm thick BWP grade plywood and finished with

mm thick wooden flooring, including edge trims,

nosing, hardware, anti-corrosive treatment to

steel members and all accessories complete as

per approved drawings and directions of the

Person-in-Charge. SPC FLOORING . As per

Architect Instruction

PROVIDING AND FIXING LOW HEIGHT STORAGE

MADE WITH 18MM,12MM,8MM PLYWOOD

FINISH WITH LAMINATE INSIDE FINISH WITH

0.8MM LAMINATE RATE INCLUSIVE WITH ALL

HARDWARE, LABOUR ETC AS PER

Providing & Fixing in Position Vertical Roller

Blinds with Minimum 3 % and Maximum 5 %

Light Transperace Screen Fabric Incuding

Providing & Fixing of Powder coated GChannel at

the Topof Window with necessary Screw , Cleats

etc. and PVC Roller ( Weight Pipe) and PVC Chain

For Up and Down Movement of Blinds etc. of

Approved Make and as per Drawings / Instruction

of Engg. in Charge For All Colors and Shades.

Rates Includes all Lead and Lift For All Floor Level,

All Height , All Material , Accessories, Fixing

Scaffolding , Labor etc. Complete in All Respects.

PROVIDING AND FIXING PANELLING WITH 12 MM

MDF WITH APPROVED LAMINATE ON SURFACE

68 LAMINATE RATE INCLUSIVE WITH ALL sq.mt 10.00 3500.00

LABOUR ETC AS PER DESIGN.

69 PROVIDING AND FIXING CLOCK nos. 1.00 2500.00

Providing and fixing 12 mm thick clear toughened

glass door 900mm x 2100mm with heavy-duty SS

pivot hinges, floor spring, SS pull handle, lockset

70 and all necessary fittings and accessories, nos. 7.00 10000.00

including cutting, edge polishing, fixing and

installation, complete as per drawings and

Architect's instructions.

Providing & Fixing Sun Control Reflective Type

Film / Frosted Film as Selected by Architect/

Engg. In Charge For Glass Doors / Windows etc.

Supplying of 2'x2' Corner Table for Waiting Area

as per Selection of architect

GST : GST will Be paid Separately as per government Policy Which will be bidded to the contractor.