Repering & Renovation (Misc. Repering Work, Window, Paver Block, Colour Work, Sanitation, Flooring, Compound Wall, Painting & Weather Shed, Electrification Work, Etc.) At.Malpur Wheat Godown Ta.Malpur, Dist.Arvalli.

(with brief specification and reference to Quantity Rate In figures Unit Amount

book of specifications)

1 Dismentaling the existing structure including 144.00 930.23 Cu.M

removing and stacking the dismentelled

materials as and where directed. (A) R.C.C.

2 Excavation for foundation up to 1.50 MT 43.00 157.08 Cu.M

depth including sorting out and stacking of

useful materials and disposing the excavated

stuff up to 50 mt lead (B) Dense or Hard

3 Excavation for foundation for depth from 15.00 287.47 Cu.M

1.5 m to 3.0 m including sorting out and

stacking of useful materials and disposing

off the excavated stuff upto 50 Meter

lead. (C) Hard Murrum

4 Filling available excavated Earth (Excluding 25.00 136.92 Cu.M

Rock ) in trench plinth side of foundation etc.

in layer not excluding 20 cm in depth

consolidation each deposited layer by

ramming and watering etc. complete

5 Providing and laying cement concrete 1:4:8 54.00 2971.42 Cu.M

(1cement : 4 coarse sand : 8 B.T. stone

aggregates 40 mm. nominal size) and curing

complete excluding cost of from work in :(a)

Foundation and plinth

6 Providing and laying controlled cement 11.00 4755.08 Cu.M

concrete M250 for curing complete including

cost of formwork but excluding the cost of

reinforcement for reinforced concrete work in

(A) Foundations, footings,Base of columns

and Mass concrete.

7 Providing and laying controlled cement 2.20 22146.36 Cu.M

concrete M-200 and curing complete

including the cost of form work but excluding

the cost of reinforcement for reinforced

concrete work in Columns, pillars, posts and

struts up to floor two level for Columns For

All Floors.

Description of Item

(with brief specification and reference to Quantity Rate In figures Unit Amount

book of specifications)

8 Providing TMT bar reinforcement of Fe-500D 10992.00 77.29 Kg.

for R.C.C. work including bending binding

and placing in position complete for All

9 Providing, laying and jointing in true line and 300.00 834.38 Rmt

level 160 diametre U.P.V.C (Type B)

conforming to IS 13592-1992 with one end

plain and other end socketed with rubber

ring, & fittings conforming to ISI 14735-1999

of approved make for drainage system pipe

line, pipe shall be jointed with each other with

rubber lubricant, pipe shall be fixed on wall

using of PVC clamp of the size 160 mm

diametre x 210 mm length x 196 mm heigh

at every 2000 mm center to center or shall

be concealed in walls as directed including

necessary fittings such as bends, shoes etc.

including testing of pipes and joints and

jointed with

10 Applying two coats of Birla or Asian (or 366.00 40.59 Sq.M

equivalent) acrylic lapy ( putty) & two coats of

primer of approved brand and manufacture

on new wall surface to give an even shade

including thoroughly brushing the surface

free from mortar dropping and other foreign

matter and sand papered smooth.

11 Wall painting (two coats) with plastic 366.00 82.97 Sq.M

emulsion paint of approved brand and

manufacture on undecorated wall surface to

give an even shade including throughly

brushing the surface free from mortar

droppings and other foreign matter and sand

papered smooth.

12 P & L 24" x 24" vitrified 8 mm thick tile 62.00 1467.72 Sq.M

flooring over 20 mm (average) base of

cement mortar 1:6 ( 1 cement: 6 coarse

sand) on new surface or fixing on existing

flooring by adhesive material including

dismentaling of existing flooring and jointed

with color cement slurry including finised with

flush pointing & cleaning the surface etc.

complete for antiskit

Description of Item

(with brief specification and reference to Quantity Rate In figures Unit Amount

book of specifications)

13 Providing and fixing door having side hung 20.00 2825.98 Sq.M

single shutter having factory fabricated std.

Extruded aluminum colour anodized hollow

section {Jindal Section No. 19552 for door

frame, hollow portion of door frame shall be

filled with non teakwood wood} with factory

made 35 mm. Thick flush door both side pre

laminated with latch lock as per detail colour

& pattern approved by this office including

necessary C.P. brass fixtures and

fastenings.

14 Providing erecting and fixing double coated 2000.00 3.95 Liter

Syntex PVC. (ISI) water tank of required

capacity each with all necessary fittings and

connection etc. complete on terrace.

15 Providing, laying and jointing in true line and 300.00 876.11 Rmt

level 110 diameter U.P.V.C SWR (Type B)

Pipe conforming to IS 13592-1992 with one

end plain and other end socketed with rubber

ring, & fittings conforming to ISI 14735-1999

of approved make for drainage system pipe

line, pipe shall be jointed with each other with

rubber lubricant, pipe shall be fixed on wall

using of PVC clamp of the size 110 mm

diameter x 149 mm length x 145 mm height

at every 2000 mm centre to centre or shall

be concealed in walls as directed including

necessary fittings such as bends, "Y" "T"

shoes etc. including testing of pipes and

joints and jointed with adhesive solvent

cement including cost of all materials.

16 Providing laying and jointing in true line and 250.00 195.67 Rmt

level 50mm dia. U.P.V.C. Pipe ( SCH- 40) for

cold water including fittings make PRINCE /

SUPREME / ASTRAL / FINOLEX or

equivalent as approved by Engineer In

Charge. Pipe shall be fixed on the wall with

the help of clamp at every two metre C/C or

shall be concealed as directed including

necessary fittings etc. including testing of

pipe and joints and fixing the same with

adhesive solvent, including cost of all

materials.

Description of Item

(with brief specification and reference to Quantity Rate In figures Unit Amount

book of specifications)

17 Providing laying and jointing in true line and 100.00 148.12 Rmt

level 40mm dia. U.P.V.C. Pipe ( SCH- 40) for

cold water including fittings make PRINCE /

SUPREME / ASTRAL / FINOLEX or

equivalent as approved by Engineer In

Charge. Pipe shall be fixed on the wall with

the help of clamp at every two metre C/C or

shall be concealed as directed including

necessary fittings etc. including testing of

pipe and joints and fixing the same with

adhesive solvent, including cost of all

materials. 40mm dia

18 Providing laying and jointing in true line and 225.00 119.15 Rmt

level 32mm dia. U.P.V.C. Pipe ( SCH- 40) for

cold water including fittings make PRINCE /

SUPREME / ASTRAL / FINOLEX or

equivalent as approved by Engineer In

Charge. Pipe shall be fixed on the wall with

the help of clamp at every two metre C/C or

shall be concealed as directed including

necessary fittings etc. including testing of

pipe and joints and fixing the same with

adhesive solvent, including cost of all

materials. 25mm dia

19 Providing laying and jointing in true line and 61.00 72.65 Rmt

level 15mm dia.U.P.V.C. Pipe ( SCH- 40) for

cold water including fittings asapproved by

Engineer In Charge. Pipe shall be fixed on

the wallwith the help of clamp at every two

metre C/C or shall beconcealed as directed

including necessary fittings etc.

includingtesting of pipe and joints and fixing

the same with adhesivesolvent, including

cost of all materials.

20 Providing and fixing Gun metal check or non- 15.00 808.00 No

return full way wheel valve.(D) 50mm dia.

21 Providing and fixing Gun metal check or non- 30.00 663.43 No

return full way wheel valve.(E) 40mm dia.

22 Providing and fixing Gun metal check or non- 3.00 420.63 No

return full way wheel valve.(C) 25mm dia.

23 Providing and fixing ball cock of approved. 30.00 189.84 No

quality as directed.(A) Copper Metal (ii)

Description of Item

(with brief specification and reference to Quantity Rate In figures Unit Amount

book of specifications)

24 Providing and fixing wash down water closet 3.00 2568.43 No

(European W.C. Pan) with integral P or S

trap and PVC dual flush tank with complete

fittings including cutting holes in walls and

making good the same connecting the flush

bend with cistern and closet etc. complete

including plastic seat cover and including

jointing trap with Waste pipe overall size as

25 Providing & fixing of first quality (ii) Flat Back 9.00 2016.97 No

washbasin 550 mm x 400mm size. (i) In

white colour. including with approved

sanitary grade material with C.P waste

coupling, waste pipe, 15mm dia Pillar & Stop

Cock of approved brand with connection

15mm dia flexiable pvc pipe etc. complete

26 Providing and fixing urinal of approved 3.00 1142.77 No

quality including connecting urinal with waste

pipe ,tap etc. complete (A) white earthen

ware flat back type size 430 mm x 260 mm x

350 mm including 32mm dia C.P. brass

waste Coupling with PVC Waste pipe and

PTMT Spreader with 15mm dia flexible pipe.

27 Providing and fixing Urinal of approved 31.00 1619.12 No

quality including connection with trap and

with integral longitudinal flush pipe.(A)

Squating plate pattern white earthenware

28 Providing and fixing screw down bib taps of 21.00 186.83 No

following size.(A) Brass screw down bib tap

polished bright. (i) 15mm dia.

29 Providing and fixing brass screw down stop 3.00 205.83 No

tap.(A) 15mm dia.

30 Providing and fixing PVC SWR Nahni trap IS 3.00 586.60 No

14735 for drain - 100 mm diameter with jali

of the following nominal diameter of self

cleansing design with C.I scread down or

hinged grating including the cost of cutting

and making good the walls.

31 Providing and fixing Jet spray to connect wall 3.00 355.34 No

mount w.c with 60 cm long plc. heavy duty

supply pipe with two side male female

checknut etc. complete.

Description of Item

(with brief specification and reference to Quantity Rate In figures Unit Amount

book of specifications)

32 Providing and fixing S.W. Gully trap with C I 8.00 1246.92 No

grating brick masonry chamber and water

tight C I cover with frame of 300 x 300 mm

size (inside) with standard weight (i)square

mouth traps (C) 150 mm x 100 mm size P or

33 Providing and fixing C.P. brass towel rail 3.00 616.42 No

complete with C.P. Brass brackets fixed to

wooden plugs with C.P. Brass screws, (B)

600mm x 20 mm size

34 Providing and fixing 600mm x 450mm 3.00 859.41 No

Bevelled edge glass mirror of superior glass

mounted on 6mm the A.C. sheet or plywood

sheet & fixed to wooden plugs with C.P.

brass screws and washers.

35 Providing and fixing in position PVC cowel 3.00 85.85 No

went to pipes.(C) 160mm dia

36 Providing and fixing in position PVC cowel 3.00 161.60 No

went to pipes.(B) 110mm dia.

37 Providing and fixing to wall, ceiling and floor 3.00 339.05 Rmt

10.0 Kg f/cm2 working pressure polyethylene

pipes of the following outside dia. Low

density, complete with special flange

compression type fittings wall clamps etc.

including making good the wall, ceiling and

floor. (G)110 mm

38 Constructing brick masonry chamber for 3.00 7506.04 No

underground C.I. Inspection chamber and

bends with bricks having crushing strength

not less than 35Kg/ Cm2 in C.M. 1:5 C.I.

cover with frame (Light duty) 455mm x

610mm intenal dimensions total weight of

cover with frame to be not less than 38Kg.

(Wt. of cover 23 Kg.) and Wt. of frame 15Kg.

) (R.C.C. top slabe with 1:2:4 mix (1-cement

:2- coarse sand :4-graded stone aggregate

20mm size) foundation concrete 1:5:10

inside plaster 15mm thick with cement

mortar 1:3 finished smooth with a floating

coat of neat cement on walls and bed

concrete etc. complete.(iii) Inside dimensions

600mm x 850 mm and 450mm deep for pipe

lines with three or more inlets.

Description of Item

(with brief specification and reference to Quantity Rate In figures Unit Amount

book of specifications)

39 Providing laying and jointing in true line and 90.00 195.67 Rmt

level 50mm dia. U.P.V.C. Pipe ( SCH- 40) for

cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on

the wall with the help of clamp at every two

metre C/C or shall be concealed as directed

including necessary fittings etc. including

testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all

materials.

40 Providing and fixing pre-cast Rubber Dye / 400.00 706.93 Sqmt.

steel Dye inter lockingconcrete block 60mm

thick with grade of concrete M300

pnumaticcompressed / vibrated mechanically

and as per approved designConfirming to IS

15658 : 2006 including 35 mm Sand layer

forlevelling and filling the joint with sand in

proper line and level asper guidlines of IRC :

SP 63-2018 etc. Complete.

41 Providing and fixing 1.20 Metre high fencing 200.00 391.93 Rmt

with 2.0 Metre long M.S. Angle posts 40mm

x 40 mm x6 mm and oil painting 3 coats fixed

at 2.5 Mt,C/c. with five Horizontan lines and

two diagonals of galvanised steel barbed

wire weighting 9.38 Kg. per 100 Metre,

strained and fixed to posts with G.I,staples

including fixing the postsin ground with 0.5 M

x 0.5.M x 0.5 M. block in C.C1:5:10 etc

42 Providing sock well 4.00 mtr. Deep and 2.0 1.00 19654.60 Nos

mtr. Dia.including excavation honey com

masonary work in C.M.1:6 including covering

the top with slab and providing manhole

cover including providing vatas and curing

etc complete

43 Providing and laying broken chine mosaic 75.00 1131.71 Sqmt

flooring for terrace using 12 mm to 20 mm

broken pieces of glazed tiles to be laid over

cement mortar 1:3 to plain or slope and to be

tempered to bring mortar creme out upto

surface using white cement including

rounding off junctions and extending them

upto 15 cm along the wall,clearing with water

and oxalic acid etc. as directed.

44 Box cutting the road surface to proper slope 773.00 109.05 Cu.M

and camber formaking a base for road work

including removing the excavatedstuff and

depositing on the road side slope as

Description of Item

(with brief specification and reference to Quantity Rate In figures Unit Amount

book of specifications)

45 Construction of Granular Sub Base (GSB) by 155.00 920.98 Cu.M

providing M.C. coarse graded material of

grading-I, spreading in uniform layers with

motor grader on prepared surface, mixing by

mix in place method with rotavator at OMC,

and compacting with vibratory roller to

achieve the desired density, complete as per

MORTH specification.

46 Providing, laying, spreading and compacting 153.00 1072.95 Cu.M

stone aggregates of specific sizes to water

bound macadam (Grade-I) (B.T. Metal of

size 45 to 90 mm) specification including

spreading in uniform thickness, hand

packing, rolling with vibratory roller 80-100

kN static wt. to proper grade and camber,

applying and brooming, stone screening/

binding materials to fill-up the interstices of

coarse aggregate, watering and compacting

etc. complete as per Specifcation.

47 Providing and filling in foundation with 181.60 3345.58 Cu.M

ordinary cement concrete M- 100 mix

including formwork, vibrating, ramming and

curing complete. (A) Foundation and plinth

48 Providing & casting in situ Controlled 300.00 5498.13 Cu.M

cement concrete M - 300 for Cement

Concrete Road laid as directed including

tamping, vibrating, finishing, curing, and

filling in joints with bitumen complete.

49 Compaction and finishing of cement concrete 1980.00 78.19 Sqmt

road by trimix process providing extra labour

charges for the trimix vacum dewatering

service process on cement concrete road

surface by using vacum dewatering pump

floater surface vibrator including making

rough finish to surface as per in including

levelling the complete.

50 Excavation for foundatiuon upto 1.5 m 286.00 253.85 Cu.M

depth incl. Sorting out & stacking of useful

material & disposing of the excavated stuff

upto 50m. Lead. (B) Dense or hard soil.

51 Providing and filling in foundation with 308.00 3921.64 Cu.M

ordinary cement concrete M- 150 mix and

providing necessary vertical pin headers

including formwork, vibrating, ramming and

curing complete.

Description of Item

(with brief specification and reference to Quantity Rate In figures Unit Amount

book of specifications)

52 Providing and laying Weep hole in abutment 150.00 86.73 No

and return by using PVC. pipe of 100 mm

dia including laying in proper grade and

joining complete etc as per details

specification.

53 White washing with lime on wall surface (two 215.00 12.73 Sqmt

coats) to give an even shade including

thoroughly booming the surface to remove all

dirt, dust; mortar drops and other foreign

Total Rs.

Rupees SixtyEight Lakh Fifteen Thousand Two Hundred NinetyEight and Paisa FourtyThree Only

I / We am / are willing to carry out the work at ________________________________% above / below

percent (should be written in figure and words) of the estimated rate mentioned above. Amount of my /

our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct_________% Below Add_________% Above

Net Rs.__________________ Net Rs.__________________

In words __________________ In words __________________

1 The Contractor shall exhibit a board with detailed specification and details of work as directed by

the Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills.

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt.

G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in

R.C.C. items where there is a change as per actual mix design the cost of difference of cement

consumption have been deducted from the rate of original item at the rate of input rate mentioned

in all the tender.

Signature of Contractor

Deputy Executive Engineer Executive Engineer

R.& B. Sub Division R.& B. Division

Malpur Modasa