PROVISION OF UG SUMP OF CAPACITY 8.0 LAKH LTR ALONGWITH PUMPING FACILITY AT MIL STN DHRANGADHRA (JOB NO 01/AMWP/2020-21/411 FD HOSP)

Amount

Lump sum price worked out by the contractor for "BUILDING WORKS" as listed in Schedule ‘A’ Part-I representing percentage (+ or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 27

Lump sum price worked out by the contractor for "SITE CLEARANCE, EXCAVATION & EARTH WORK" as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 28

Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY " as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 29

Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 31

Lump sum price worked out by the contractor for "ROAD, PATH, CULVERT & HARDSTANDING" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 33

Lump sum price worked out by the contractor for "SEWAGE DISPOSAL" as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 35

Lump sum price worked out by the contractor for "AREA DRAINAGE" as listed in Schedule ‘A’ Part-VII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES B/F from Sl page No. 36

Lump sum price worked out by the contractor for "FENCING, COMPOUND WALL & GATE" as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 38

Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 39

Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 41

Sch 'A' PART-XI (MISCELLANEOUS ITEMS) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items which categorically includes for same shall be measured and paid separately under respective schedule.

INTERNAL WATER SUPPLY S&F of 15 mm bore CP brass bib cock screwed for iron pipe of ferrule and fixed complete all as specified and directed. Make - Jaquar ESSCO SERIES or technocommercial equivalent makes as per Appx 'C'.

S&F of 15 mm bore CP brass angular stop cock screwed for iron pipe of ferrule and fixed complete all as specified and directed. Make - Jaquar ESSCO SERIES or technocommercial equivalent makes as per Appx 'C'.

INTERNAL ELECTRIFICATION S&F decorative box type LED tube light fitting 1x20 watt including LED tubular lamp with IP20 protection, inbuilt driver etc complete with all accessories internally pre-wired including connecting up with twin core twisted flexible copper conductor cable of 1.0 sq. mm size complete all as specified and directed.

S&F heavy duty, exhaust fans of 250 mm sweep suitable for SP 230/250 v 50 Hz AC supply complete with louver shutters including fixing/grouting of frame in wall and cutting opening complete and connecting with and including 3 Nos 1.5 Sqmm single core, PVC insulated but unsheathed FRLS cable with multistranded copper conductors from ceiling rose to fan complete all as specified and directed.

S&F heavy duty, exhaust fans of 300 mm sweep suitable for SP 230/250 v 50 Hz AC supply complete with louver shutters including fixing/grouting of frame in wall and cutting opening complete and connecting with and including 3 Nos 1.5 Sqmm single core, PVC insulated but unsheathed FRLS cable with multistranded copper conductors from ceiling rose to fan complete all as specified and directed.

S&F ceiling fans 1200mm sweep energy efficient five star rated incl down rods and connecting up with 3 runs of 1.5 sq mm, single core PVC insulated but unsheathed, FRLS cable with multistranded copper conductors IS 694 marked, from ceiling rose to fan complete all as specified and directed.

S&F of MCBs, of following capacity, IS-8828 marked of the undermentioned type and rating and fixing in DBs (DBs catered separately in this Schedule)

SP MCB 6 to 32 Amp 10 KA rupturing capacity 240 Volts C series

SPN MCB 32/40 Amp 10 KA rupturing capacity 240 Volts C series

M&L for sub main wiring with Two runs of 4.0 Sqmm size main cable and one run of 4.0 Sqmm size earth continuty conductor of single core PVC insulated but unsheathed FRLS cable multi standed copper conductors, 1100 volts grade, IS-694 marked all drawn through and including suitable size rigid PVC conduit pipe medium grade ISI marked & fittings/ accessories all fixed to the surface of wall/ceiling complete all as specified and as directed

M&L for sub main wiring with Two runs of 6.0 Sqmm size main cable and one run of 6.0 Sqmm size earth continuty conductor of single core PVC insulated but unsheathed FRLS cable multi standed copper conductors, 1100 volts grade, IS-694 marked all drawn through and including suitable size rigid PVC conduit pipe medium grade ISI marked & fittings/ accessories all fixed to the surface of wall/ceiling complete all as specified and as directed

Note for item No 19.00 to 20.00:- The above mentioned specified runs of single core main cables and specefied runs of earth continuity conductors and the relevant conduit with accessories shall be measured as one runs length. The small extra lengths required for loops etc for connection in DBs shall deemed to be included in quoted rate and only the cable covered in conduit shall be measured.

ROAD, PATH, CULVERT & HARDSTANDING M&L for 100 mm thick (50 mm thick each layer compacted thickness) Wet Mixed Macadam (WMM) in layer conforming to grading given in table 400-13 & physical requirement given in table 400-12 spread by mechanical means & rolled by using 8-10 ton vibrator power roller over compacted surface of soling as specified in clause 406 3.5 of MORTH&H specification complete all as specified.

SEWAGE DISPOSAL M&L for construction of Septic tank 10-30 users capacity, internal Size 2.30m x 1.10m and liquid depth 1.30m single compartment with stone masonry construction and RCC slab all as per Drg No CEJZ/TD/31 sheet 1/3 to 3/3 complete all as directed and specified .

M&L for construction of Seepage pit upto 20 users of size 2.50m dia and 2.40m effective depth with 30cm thick Stone masonry wall and brick bat filling complete all as per Drg No CEJZ/TD/68 sheet 3/4 complete all as directed and specified .

S&F orange colour safety foot rest of minimum 6 mm thick plastic in capsulated as per IS-10910 on 12 mm dia steel bar conforming to IS : 1786 (over all 60 cm length) complete all as specified and directed.

Cutting into existing manholes for connecting new drain pipes, making good to pipes and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 sec) in cement concrete (1:2:4) type B1, using 20mm graded stone aggregate, smooth finished and reforming benching as required for 200mm internal dia of pipe complete all as specified and directed.

EXTERNAL WATER SUPPLY Supply & laying for centrifugally cast (spun) ductile iron (DI) pressure pipe of 150 mm bore with socket & spigot ends, class K-9 in standard length of 5.50/6.0 mtrs, suitable for tyton joints laid in trenches complete all as specified & directed.

Supply & laying for centrifugally cast (spun) ductile iron (DI) pressure pipe of 200 mm bore with socket & spigot ends, class K-9 in standard length of 5.50/6.0 mtrs, suitable for tyton joints laid in trenches complete all as specified & directed.

S&F of Rubber tyton joints suitable for ductile iron (DI) pipes of 150 mm bore, Class K-9 and fittings complete all as specified & directed.

S&F of Rubber tyton joints suitable for ductile iron (DI) pipes of 200 mm bore, Class K-9 and fittings complete all as specified & directed.

S&F Air release valve with two air outlets conforming to IS 14845 of size 150 mm dia including all jointing materials complete all as specified & directed.

S&F Air release Valves with single air outlets conforming to IS 14845 of size 80 mm dia including all jointing materials complete all as specified & directed.

Supply, installation, connecting and testing sluice valve of size 150 mm dia with flanged ends class PN-1.6 with iron wheel, stainless steel spindle and check nut confirming to IS : 780 including all jointing materials such as nuts, bolts, washers and gaskets etc complete all as specified & directed.

Supply, installation, connecting and testing sluice valve of size 200 mm dia with flanged ends class PN-1.6 with iron wheel, stainless steel spindle and check nut confirming to IS : 780 including all jointing materials such as nuts, bolts, washers and gaskets etc complete all as specified & directed.

S&F foot valve of size 150 mm dia including all jointing materials such as nuts, bolts, washers and gaskets etc complete all as specified & directed.

S&F cast iron, reflux valve (non return valve) of size 150 mm dia with flanged ended with rubber gasket and nut bolts complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode of 60 cm x 60 cm x 6mm thick buried directly in ground [earth pit not less than 2.25 metre deep below normal ground level] with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized earth strip 32 x 6mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 3 of MES SSR Part I all as specified and testing on completion including provision of earth lead protected by 40 mm dia light grade GI pipe & watering pipe shall be 20 mm bore medium grade GI pipe including all excavation and earth work in any type of soil, PCC pit with RCC cover, charcoal, salt, funnel etc complete.

NOTE FOR ITEM NO. 36.00:- Rate quoted by tenderers shall be deemed to include for following provisions:- [i] Excavation & earth work in any type of soil including removing of surplus material upto 50 Mtr. [ii] PCC 1:3:6 type C1 using 20mm graded stone aggregate in pit & 40mm thick precast RCC 1:2:4 type B1 cover 50x50 cm with 8mm TMT bars @ 10 cm C/C both ways with handles. [iii] Main earthing lead from earth electrode to test point upto 7.5 mtr. [iv] Funnel with watering pipe [GI pipe] 20mm bore [ISI marked] medium grade & copper lugs, charcoal & salt as reqd. [v] GI protection pipe of size 40 mm bore light grade 7.5 mtr.

S&F of CI/DI fittings for flanged pipes, bends, tapers, Tee pieces (Single & double branch) any type and angle/radius and straight connecting pieces all ends flanged complete all as specified and directed.

M&L for Cutting of existing CI/DI pipes up to 300 mm dia for insertion of new tees, insert of D Joint, branches etc complete all as specified & directed, Note:- Fittings shall be measured and paid separately.

M&L for cutting of Road / PCC path, hard standing etc of depth not less than 60cm and width not less than 45cm for laying water supply pipe and making good the existing surface with PCC (1:2:4) type B-2 of 150mm thick complete all as specified and directed.

M&L for boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine including HDPE pipe of 250mm dia suitable for 0.4 mpa working pressure complete all as specified and directed.

Supplying, installing, commisioning & testing of monoblock pumps sets of electrical driven 3 phase, 415 V, 50 Hz, IP-55, 20 HP and including base channel & PCC foundation in PCC (1:2:4)Type B1 using 20mm graded stone agreegate 30 cm above floor level as per manufacture instructions complete all as specified and directed.

Supplying, installing, commisioning & testing of LT indoor panel CPRI approved cubical type totally enclosed wall mounted type cabinet suitable size fabricated made out of 2mm, MS sheet and angle iron frame 40X40x6 mm frame work, the panel should be vermine proof with IP-55 Protection suitable 415V, AC 50 Hz, 3 phase 4 wire system panel board should be painted with 2 coats powder coating over a coat of anti corrosive red oxide primer. The panel shall be front opening type and consisting of copper bus bar 200 Amps capacity for phase and neutral and consisting the following accessories:-

M&L for Construction of PCC solid block Masonry valve chamber of size 1000mm x 1000mm x 1000 mm (Internal dimensions) with PCC foundation 1:4:8 type D-2 using 40mm graded stone agrregate 150mm thick,150mm wide offsets around over 100mm thick hard core, 200mm thick PCC solid block walls built in CM 1:6, 50mm thick PCC 1:2:4 type B-1 coping finished even smooth, redering 10mm thick in cement mortar(1:6), finished even and smooth without using extra cement internally including top of floor including excavation earthwork in hard /dense soil, 3mm thick MS sheet cover fixed on 25mmx25mmx6mm thick angle iron frame with hold fasts embedded in PCC coping with locking arrangement, mild steel handles and painting to steel surfaces with two coats of synthetic enamel paint over one coat of primer including disposal of surplus soil to distance not exceeding 50m etc complete all as specified and directed.

EXTERNAL ELECTRIFICATION S&F LED street light fitting 70 Watt, 230 Volts AC outdoor type with high pressure die cast aluminum hosing and heat resistant including thermal management in multiple optics complete with IP 65/66 protection with impact and corrosion resistant 10 KV surge protection, 100 LUm per watt with 5 years warranty complete with driver & lamp, 25mm dia light grade GI pipe bracket of length 1 mtr with suitable clamp complete all as specified and directed.

S&F PVC junction box, factory made of size 290 mm X 180mm X 110mm with one No MCB SP of 06 Amp rating, class-B and 4 Nos connector fixed on pole with necessary clamps and bolts etc duly painted with two coats of aluminum paint over a coat of red oxide primer including connecting with street light cable complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode of 60 cm x 60 cm x 6mm thick buried directly in ground [earth pit not less than 2.25 metre deep below normal ground level] with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized earth wire of 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 3 of MES SSR Part I all as specified and testing on completion including provision of earth lead protected by 15 mm dia light grade GI pipe & watering pipe shall be 20 mm bore medium grade GI pipe including all excavation and earth work in any type of soil, PCC pit with RCC cover, char coal, salt, funnel etc complete.

NOTE FOR ITEM NO. 46.00:- Rate quoted by tenderers shall be deemed to include for following provisions:- [i] Excavation & earth work in any type of soil including removing of surplus material upto 50 Mtr. [ii] PCC 1:3:6 type C1 using 20mm graded stone aggregate in pit & 40mm thick precast RCC 1:2:4 type B1 cover 50x50 cm with 8mm TMT bars @ 10 cm C/C both ways with handles. [iii] Main earthing lead from earth electrode to test point upto 7.5 mtr. [iv] Funnel with watering pipe [GI pipe] 20mm bore [ISI marked] medium grade & copper lugs, charcoal & salt as reqd. [v] GI protection pipe of size 15 mm bore light grade 7.5 mtr.

M&L for earthing complete with galvanized steel earth plate electrode of 60 cm x 60 cm x 6mm thick buried directly in ground [earth pit not less than 2.25 metre deep below normal ground level] with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized earth strip 25 x 4mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 3 of MES SSR Part I all as specified and testing on completion including provision of earth lead protected by 40 mm dia light grade GI pipe & watering pipe shall be 20 mm bore medium grade GI pipe including all excavation and earth work in any type of soil, PCC pit with RCC cover, charcoal, salt, funnel etc complete.

NOTE FOR ITEM NO. 47.00:- Rate quoted by tenderers shall be deemed to include for following provisions:- [i] Excavation & earth work in any type of soil including removing of surplus material upto 50 Mtr. [ii] PCC 1:3:6 type C1 using 20mm graded stone aggregate in pit & 40mm thick precast RCC 1:2:4 type B1 cover 50x50 cm with 8mm TMT bars @ 10 cm C/C both ways with handles. [iii] Main earthing lead from earth electrode to test point upto 7.5 mtr. [iv] Funnel with watering pipe [GI pipe] 20mm bore [ISI marked] medium grade & copper lugs, charcoal & salt as reqd. [v] GI protection pipe of size 40 mm bore light grade 7.5 mtr.

Supplying, installation, commissioning and testing of feeder pillar box CPRI approved kiosk type, LT (415 Volts, 50 Hz, 3 Phase 4 wire supply) floor mounted, factory made, outdoor type, weather and vermin proof made out of 3.15 mm thick CRCA MS sheet including rubber lining, locking arrangement, painted externally and internally with two coats of synthetic enamel greay paint (first Quality) over a coat of red oxide, 40mm x 40 mm x 6 mm angle iron stand including PCC foundation complete comprising of following:-

Supplying, installation, commissioning and testing of Diesel Engine Gererating Set, 30 KVA,1500 RPM, 3 phase, 415 V, 50 c/s, power supply alternator along with fuel tank ,control panel, battery and complete set installed in sound acoustic enclosure and standard accessories and fittings with power factor 0.8, PCC foundation suitable for the generator set as per manufacturer's instructions, tools and spares complete all as specified and directed and comprising of the following:-

(a) Engine:- Diesel engine, 6 cylinder engine developing required BHP @ 1500 RPM for continuous duty of suitable for 30 KVA alternator with provision of 10% over load for one hour in every 12 hour running confirming to BS 5514/ISO 3046 standard Totally enclosed, electric star, compression ignition, 4 stroke. The engine shall consists of following specification:- (i) Fly wheel to suit flexible coupling with starer ring, cooling radiator with blower fan, fuel houses, mico fuel pump with mechanical governor, oil bath type air cleaner, exhaust silencer, SS expansion bellow, lubricating oil fitler, fuel oil filter, 24 V electric starting system, battery charging alternator,engine control panel consisting of ON/OFF START key, lub oil pressure guage, water temp guage, ammeter battery charging safely divices such as low lubricating oil pressure, light, water, temperature etc as per standards.

(ii) Instrument panel consisting of starting switch with key lubricating oil, temperature guage, lubricating oil pressure gauge, water temperature guage, battery charging indicating lamp, hour meter with RPM indicator, safety control against high temperature of water, over speed stop with double driver adopter. (iii) Alternator: Self excited self regulated, floor mounted with all and / or roller bearings, statically and dynamically balanced screen protected SPDP enclosures confirming to IS 4722 / BS 2613, single shaft extensive type with damper winding on pole ‘F’ class insulation automatic voltage regulated from no load to full load, ammeter capacity of delivery 30 KVA, 415 volts, 3 phase,5 0cycles and lagging for AC supply and will be suitable for tropical conditions. (iv) Fuel tank size provide for 12 Hours run. (v) Power bank provide suitable capacity. (vi) Battery shall be provided as per OEM recommendations and all as standard fittings complete. (vii) S&F testing microprocessor/relay based Indoor type in built AMF panel suitable for DG Set capacity 30 KVA complete as specified and directed -01 No

S&F on load change over switch open execution type, front handle operated, 4 pole, 415 volts, 50 Hz, AC supply of 63 Amps cofirming to IS 13947-3, complete all as specified and as directed.

S&F PVC insulated & sheathed, multistranded copper conductor industrial cable 1.5 sqmm 3 core 1100 volt grade from junction box to street light fitting as required complete all as specified and as directed.

Saiansh Associates