SITC of additional cold Storage room adjacent to the existing cold storage room along with AMC for 3 years at Annadanam, Sri PAT, Tiruchanoor. (Part-A: SITC & (Part-B: AMC of cold Storage).

Part- A (SITC of cold storage)

Open Tender Items

Supply and Installation of Pre-Fabricated Sandwich 60mm thick PUF Insulated Panel. 0.4mm Thick SS/SS, Density of 40kg/m3 for wall and Roof Panels of cold room size. Make : EAKCON / ANNAM/Bluestar/Voltas/Daikin .

Supply and Installation of Pre-Fabricated Sandwich 60mm thick PUF Insulated Panel. Density of 40kg/m3 Floor Panels of Cold Room with 10mm Tar felt on both sides of the floor. Make : EAKCON / ANNAM/Bluestar/Voltas/Daikin

Providing Concrete Flooring with Grade M20 Ratio 1:1.5:3 (Cement : sand : aggregate) thickness of 100mm as directed by the department Officials

Supply and laying of 25mm thick Kota Stone with neat Finishing in the Room as directed by the department Officials.

Supply and installation of Door Size 1000mm X 2000mm X 60mm SS/SS with manual Swing, Human Safety door Release, Heavy Duty Latches, Stainless Steel Door hinges for Cold room with necessary locking arrangements. Make : : EAKCON / ANNAM/Bluestar/Voltas/Daikin

Supply and Installation of Door Frame 1150mm X 2400mm pre-Fabricated Sandwich 80mm thick PUF insulated Panel with Rigid PUF injected CFC free Polyurethane foam as insulation and SS Sheet 0.4mm Thick on Both Side as skin materials and having density of 40Kg/m3 as directed by the department officials. ake : EAKCON / ANNAM/Bluestar/Voltas/Daikin

Providing Inner and Outer Flashing on Both Sides with SS/SS Sheet 0.4mm Thick.

Supply and Installation of Vapour proof Moisture proof light fitting using LED.

Supply of Refrigeration unit capable of 5.8kW with temperature controller model as Detailed Below

EVAPORATING UNITS:

The Evaporator is housed within the cold storage and occupies minimum space .This allows to utilize max Volume of the cold storage.

Stainless Steel Body (SS 304) for Enhanced durability and Strength.

Inner Grooved Copper tubes for Superior heat transfer Coil to enable air- defrosting.

Improved air throw for uniform air distribution

External rotor driven fans have low noise and confirm to IP 45 Standards.

Removable side Panels for easy Service.

Ceiling mounted with SS Casing operate on 415v/3Ph/50Hz Supply.

CONDENSING UNITS:

Energy efficient Hermatic Sealed compressors ( Make : Copeland) with air cooled condenser on 415v/3Ph/50Hz Supply

Powder Coated Body makes these units corrosion Resistant

Inner Grooved Copper Tubes and slit aluminum fins for superior heat transfer

Filter Drier and Moisture and dirt protection.

Safety and Control devices for better System protection

Thermally Protected Fan motor

Refrigerant :R407C/R404A

Make : EAKCON / ANNAM /Bluestar/ Voltas/Daikin

Supply and Installation of Copper Pipe for Refrigeration unit Suction 7/8 inches dia and liquid line 3/8 inches dia and tubular insulation.

Supply and Installation of Electrical Control panel for (5.8kW) refrigeration unit of size 400mm x 400mm x 175mm made with 2mm thick GI Powder Coated Sheet with necessary control wiring for compressor, condenser fan, evaporator fan, digital indicator, ON-OFF Switch, overload relay and contactor with suitable MCB switch, Single phase Preventer and will all accessories.

Supply and installation of Safety alarm hooter for inside human Safety

Percentage tender items

Supply of 4 core, 4.0 Sq mm ISI marked, PVC insulated and sheathed FRLS/FRLS-H round copper cable for voltage up to 1100V as per IS 694/1990 . Makes: Finolex / RR kabel / Havells/ Finecab /KEI/Polycab/ Gloster/ Goldmedal/GM// Fortune Arrt/Anchor /Million .

Supply of 4 core, 2.5 Sq mm ISI marked, PVC insulated and sheathed FRLS/FRLS-H round copper cable for voltage up to 1100V as per IS 694/1990 . Makes: Finolex / RR kabel / Havells/ Finecab /KEI/Polycab/ Gloster/ Goldmedal/GM// Fortune Arrt/Anchor /Million.

Supply of 4 core, 1.5 Sq mm ISI marked, PVC insulated and sheathed FRLS/FRLS-H round copper cable for voltage up to 1100V as per IS 694/1990 . Makes: Finolex / RR kabel / Havells/ Finecab /KEI/Polycab/ Gloster/ Goldmedal/GM// Fortune Arrt/Anchor /Million .

Supply of stainless steel S5-304 grade tubes, sections ,plates, sheets and pipes of all sizes and diameters

Supply and placing of the M20 Design Mix Concrete corresponding to lS 456 using concrete mixer using of 20mm HBG crushed metal 0.480 cu.m, 10mm HBG crushed metal 0.320 cu.m, sand 0.400 cu.m and cement 350 kg with water cement ratio of 0.53 (185.5 Lit per cu.m of CC) etc., to site and including all operational, incidental and labour charges such as machine mixing, vibrating, laying concrete, curing etc., complete with minimum cement content as per lS code from standard suppliers approved by the department, but excluding cost of centering, shuttering charges and excluding cost of steel and its fabrication charges, for finished item of work (APSS No.402). Foundations, Plinth Pedestals (Below Plinth)

Part - B (AMC of cold storage ) Open tender rates

Comprehensive AMC for additional cold Storage room at Annadanam, Sri PAT, Tiruchanur for three years after warranty period of one year.

Comprehensive AMC for 1st Year

Comprehensive AMC for 2nd Year

Comprehensive AMC for 3rd Year

Scope of Work: (1) Attending Preventive maintenance for 4 times during the contract i.e., Quarterly once. (2) Free replacement of defective / worn out parts with new service part such as Compressor, Fan motor for both IDU & ODUK, Fan Blades, Electrical parts such as temperature controllers, relay, contactor, capacitor and thermostats etc., and Refrigerant Gas Charging if required. (3) Attending any number of Breaks Down calls if any when required. (4) Service reports should be send to the D.E(Elec)-I and concern Dy.EE(Elec), AE/AEE(Elec) soon after every service.

Note: (i) The Tender will be finalized based on overall lowest cost of Part-A and Part-B of the Tender. Agreement for Part-A and Part-B portion of work will be concluded separately from the lowest tenderer. (ii) Service report is respect of the above system shall be submitted to the concern Dy.E.E(Elec)-TTD-PAT and AE(Elec).

(iii) Payment will be made quarterly basis after service on pro rate basis .

(iv) All minor repairs should be rectified within 6 hours and major repairs like compressorreplacement should be completed with 3 days . Penalty of Rs 5,000/-per day over and above given allowed period .

(v) The rates quoted for Part-A and Part-B portions of work should be of basic price excluding GST.

Open Tender Items (Sl.No. 1 to 12) and Part-B Total: