CONSTRUCTION OF AGRICULTURE COLLEGE BUILDING ALONG WITH RELATED BUILDING WORK AT J.A.U. JAMNAGAR

Sr. DESCRIPTION OF ITEM Qty. Rate Per Amount

(A) CIVIL WORKS:-

1 Excavation for foundation up to 1.5mtr depth 1170.00 122.94 Cmt

including sorting out and stacking of useful

materials and disposing of the excavated stuff

up to 50 meter lead. Loose or soft soil

2 Excavation for foundation for depth from 1.5 m 3310.00 597.60 Cmt

to 3.0 m including sorting out and stacking of

useful materials and disposing off the

excavated stuff up to 50 Meter lead. (E) Hard

3 Providing and laying cement concrete 1:3:6 (1- 590.00 3005.76 Cmt

Cement : 3 coarse sand : 6- hand broken stone

aggregates 40 mm nominal size) and curing

complete including cost of formwork in (A)

Foundation and Plinth

4 Filling available excavated earth, (excluding 2650.00 136.92 Cmt

rock in trenches plinth, sides of foundations etc.

in layers not exceeding 20 cm. in depth

consolidating each depo- sited layer by

ramming and watering etc complete as directed

5 Filling in foundation and plinth with murrum or 2880.00 301.78 Cmt

selected soil in layers of 20 cm. thickness

including watering ramming and consolidating

etc. complete as directed by E.I.C. directed by

6 Brick work using common burnt clay building 480.00 4051.78 Cmt

bricks having crushing strength not less than

35 kg./ Sq.Cm. in foundation and plinth in

Cement Mortar 1:6 (1- Cement : 6 -fine

sand)(B) Conventional

7 P/L Ordinary Cement, Concrete M250 for 1260.00 4882.25 Cmt

R.C.C. Column footing & Column up to plinth

including necessary shuttering, centering,

formwork, and consolidation with machine

mixed vibrators. in true line and level including

necessary exposed surface smooth finishing

with C.M. (1:3) and curing etc. complete but

excluding cost of reinforcement etc comp as

directed by E.I.C.

8 P/L Ordinary Cement, Concrete M250 for 40.00 6221.67 Cmt

R.C.C. Coping including necessary shuttering,

centering, formwork, and consolidation with

machine mixed vibrators. in true line and level

including necessary exposed surface smooth

finishing with C.M. (1:3) and curing etc.

complete but excluding cost of reinforcement

etc comp as directed by E.I.C.

9 P/L Ordinary Cement, Concrete M250 for 180.00 6159.26 Cmt

R.C.C. plinth / ground beam including

necessary shuttering centering formwork

consolidation with machine mixed vibrators. in

true line and level including necessary exposed

surface Smooth finishing with C.M. (1:3) and

curing but excluding cost of reinforcement etc

complete as directed by E.I.C.

10 P/L Ordinary Tri mix Cement, Concrete 1:1.5:3 350.00 4891.51 Cmt

( 1 cement 1.5 coarse sand 3 graded stone

agg. of 20mm nominal size B.T. kapchi) for

R.C.C. Flooring including necessary shuttering

centering formwork consolidation with machine

mixed vibrators. in true line and level including

necessary exposed surface sPmooth finishing

with C.M. (1:3) and curing but excluding cost

of reinforcement etc complete as directed by

11A P/L Ordinary Cement, Concrete 1:1.5:3 (1 230.00 9046.21 Cmt

cement 1.5 coarse sand 3 graded stone agg. of

20mm nominal size B.T. kapchi) for R.C.C.

Column including necessary shuttering,

centering, formwork, and consolidation with

machine mixed vibrators. in true line and level

including necessary exposed surface smooth

finishing with C.M. (1:3) and curing etc.

complete but excluding cost of reinforcement

etc comp as directed by E.I.C. For Ground

Floor For All Section

11B For First floor 220.00 9178.05 Cmt

For All Section

11C For Second floor 280.00 9219.43 Cmt

For All Section

12A P/L Ordinary Cement, Concrete 1:1.5:3 ( 1 250.00 6971.81 Cmt

cement 1.5 coarse sand 3 graded stone agg. of

20mm nominal size B.T. kapchi) for R.C.C.

beam including cost of necessary shuttering

centering formwork consolidation with machine

mixed vibrators. in true line and level including

curing etc. complete but excluding cost of

reinforcement etc complete as directed by

E.I.C. For Ground floor

For All Section

12B For First floor 240.00 7013.19 Cmt

For All Section

12C For Second floor 220.00 7054.57 Cmt

For All Section

13A P/L Ordinary Cement, Concrete 1:1.5:3 ( 1 30.00 10134.53 Cmt

cement 1.5 coarse sand 3 graded stone agg. of

20mm nominal size B.T. kapchi) for R.C.C.

lintel Ground Floor including necessary

shuttering centering formwork consolidation

with machine mixed vibrators. in true line and

level including necessary exposed surface

smooth finishing with C.M. (1:3) and curing

etc. complete but excluding cost of

reinforcement etc complete as directed by

E.I.C For Ground floor

13B For First floor 30.00 10175.91 Cmt

13C For Second floor 40.00 10217.29 Cmt

14A P/L Ordinary Cement, Concrete 1:1.5:3 ( 1 470.00 7281.89 Cmt

cement 1.5 coarse sand 3 graded stone agg. of

20mm nominal size B.T. kapchi) for R.C.C. slab

having any cross section area up to floor two

level in true line level including cost of

necessary shuttering centering formwork

consolidation with machine mixed vibrators. in

true line and level including necessary exposed

surface smooth finishing with C.M. (1:3) and

curing etc. complete but excluding cost of

reinforcement etc complete .as directed by

E.I.C. For Ground floor

14B For First floor 460.00 7323.27 Cmt

14C For Second floor 430.00 7364.65 Cmt

14D For Third floor 8.00 7406.03 Cmt

15A Providing & Laying Ordinary Cement, Concrete 9.00 7426.82 Cmt

1:1.5:3 (1 cement 1.5 coarse sand 3 graded

stone agg. of 20mm nominal size B.T. kapchi)

for R.C.C. stair case up to floor two level in

true line level exposed surface smooth

finishing with C.M. (1:3) including cost of

shuttering centering, formwork consolidation

with machine mixed vibrators. and curing

excluding cost of reinforcements etc. complete

as directed by E.I.C. For Ground floor

For All Section

15B For First floor 9.00 7468.20 Cmt

For All Section

15C For Second floor 9.00 7509.58 Cmt

For All Section

16A P/L Ordinary Cement, Concrete 1:1.5:3 ( 1 1.00 14281.76 Cmt

cement 1.5 coarse sand 3 graded stone agg. of

20mm nominal size B.T. kapchi) for R.C.C.

work in horizontal or vertical fins for super

structure .including necessary shuttering

centering formwork consolidation with machine

mixed vibrators. in true line and level including

necessary exposed surface smooth finishing

with C.M. (1:3) and curing etc. complete but

excluding cost of reinforcement etc complete

as directed by E.I.C For Ground floor For All

16B For First floor 1.00 14323.14 Cmt

For All Section

16C For Second floor 1.00 14364.52 Cmt

For All Section

17A P& L Ordinary Cement, Concrete 1:1.5:3 ( 1 8.00 6926.11 Cmt

cement 1.5 coarse sand 3 graded stone agg. of

20mm nominal size B.T. kapchi) for R.C.C.

chajjas not exceeding 10 M.M. thickness up

to floor two level in true line level including cost

of necessary shuttering centering formwork

consolidation with machine mixed vibrators. in

true line and level 0.70 Cumt. Including

necessary exposed surface smooth finishing

with C.M. (1:3) and curing etc. complete but

excluding cost of reinforcement as directed by

E.I.C. For Ground floor For All Section

17B For First floor 8.00 6967.49 Cmt

For All Section

17C For Second floor 8.00 7008.86 Cmt

For All Section

18A Providing & Laying Ordinary Cement, 13.72 9558.70 Cmt

Concrete1:1.5:3 mix ( 1 cement : 1.5 coarse

sand: 3 graded stone aggregate 20mm nominal

size B.T. kapchi) for R.C.C. WALL up to floor

two level in true line level including cost of

necessary shuttering centering formwork

consolidation with machine mixed vibrators. in

true line and level including necessary exposed

surface smooth finishing with C.M. (1:3) and

curing etc. complete but excluding cost of

reinforcement as directed by E.I.C. For Ground

floor For All Section

18B For First floor 5.00 9600.24 Cmt

For All Section

18C For Second floor 5.00 9641.62 Cmt

For All Section

18D For Third floor 5.00 9683.00 Cmt

For All Section

19 Providing TMT Bar FE 500D reinforcement for 578298.00 76.21 Kg

R.C.C. work including bending, binding and

placing in position complete up to floor two

20A Brick work using common burnt clay building 530.00 4320.08 Cmt

bricks having crushing strength not less than

35 kg./ Sq.Cm. in Superstructure in Cement

Mortar 1:5. (1- Cement : 5 –fine sand) (B)

Conventional For Ground floor

20B For First floor 530.00 4628.58 Cmt

20C For Second floor 470.00 4937.07 Cmt

20D For Third floor 100.00 5245.57 Cmt

21 Half brick masonry in common brunt clay 420.00 663.21 Smt

building bricks having crushing strength not

less than 35 Kg/Sq.Cm. in Cement mortar 1:3 (

1-Cement : 3-coarse sand ) with 2 Nos of 6mm

Mild steel round bars after every three course

embedded in Cement Mortar in foundation and

plinth (B)Conventional

22 Providing and fixing 32mm thick fully paneled 280.00 5404.86 Smt

shutter for door including 30 mm thick water

proof flush door of CENTURY or GREENLAM

make & with 1.00 mm laminated sheet on both

side of GREENPLY OR DURIAN and with

Prestress cement Concret frame of 250 x

mm size of approved quality make with

necessary teak wood beading of 12 mm thick &

YAMA or I-Twenty make s.s. fixtures &

fastening with brass screws including two

coats of varnish and etc complete as directed

by Engineer in charge

23 Providing and fixing Jindal aluminum colour 5.00 8364.52 Smt

anodize pipe main frame 20072-

6350x38.10(weight kg/m 1.095), door vertical

19572-85x44.45 (weight kg/m 1.0301), door

bottom & top 19519- 100x44.45(weight kg/m

1.921), door middle 19525- 83x44.45(weight

kg/m 1.679) Glazing clip 15352-17.30x19

(weight kg/m 0.097), 5mm ASAI grey glass,

white virgin glass rubber, door vertical rubber,

100mm bras piot, 150mm door handle, door

lock, door closer, screw, grip, with labour

(85mm Aluminium Section Door)

24 Providing and fixing 25mm thick Form PVC 50.00 3906.75 Smt

shutter door of DECORA or Equivalent make.

Including Shutter with S.S. Screw in level with

I-twenty make Stainless steel fixtures &

fastening and complete with Pre stress cement

Concert frame of 100 x 75 mm size of

approved quality as directed by Engineer in

25 Providing & Fixing Three track Window with 244.00 5055.12 Smt

Plain pipe fram 14053-95x24(weight kg/m

0.738) ¾ Jindal aluminum colour anodize

track sliding window 3 track frame

31.75x92mm, bottom 20957 (weight kg/m

0.911) 3 track top 20958 (weight kg/m 0.759) –

shuttar section – 20605 (weight kg/m 0.469)-

20606 (weight kg/m 0.417) – 20604(weight

kg/m 0.417), 4mm thick ASAI grey glass, white

virgin glass rubber –track rubber woolpie,

window roller MS metal long body Teflon

no.625 roller, 4” albos metal lock include-

silecon- screw, grip, with labour.(pipe with

40mm Three track Window)

26 Providing & fixing Plain pipe fram 14070- 340.00 4501.17 Smt

63x38.10(weight kg/m 0.781) ¾ Jindal

aluminum colour anodize Two track sliding

window 2 track frame 31.75x61.85, bottom

20956 (weight kg/m 0.621) 2 track top

(weight kg/m 0.547) – shuttar section –

(weight kg/m 0.469)- 20606 (weight kg/m

0.417) – 20604(weight kg/m 0.417), 4mm thick

ASAI grey glass, white virgin glass rubber –

track rubber woolpie, window roller MS metal

long body Teflon no.625 roller, 4” albos metal

lock include-silecon- screw, grip, with labour

(pipe with 40mm Two track Window)

27 Providing and fixing fully glazed anodize 90.00 3253.79 Smt

aluminum fix type glazing frame section of

size 63.5x38.10mm (20047).of Zindal or

equivalent and fixing with panel ‘Assai’ or

equivalent make 6mm thick plain glass. Glass

fixed with glazing clip, angle cleat, nylon rubber

packing, of approved quality, necy. Screw, grip

etc. comp.as directed by Engineer in charge

28 Providing and fixing standard extruded of 24.00 2407.64 Smt

aluminum section of size 63mm x 38.10mm x

1.2mm , @ Wt. 0.643 Kg/mt with colour Powder

Coated alluminium frame for ventilation with

mm thick frosted glass as details etc complete

for Ventilation

29 Providing and fixing M.S. plain grill with M.S. 12570.00 112.91 Kg.

flats, square bar, round bar, etc. in required

size and spacing in wooden frames of windows

and ventilators, as per detailed drawing &

design including one coat of primer and two

coat of enamel oil paints of approved quality

brand and shade etc complete as directed by

30 Providing and fabricating and fixing Stainless 120.00 4692.66 Smt

steel 304 grade railing Top pipe 50 mm dia.

Vertical 25mm dia pipe two nos for each steap

fxing on floor steap with S.S. stude including

EPOXY GROUT of Cica make material and

Horizantale cross 25mm dia Three pipe

throughout fixing with S.S. stude 304 grade

fabricating, hoisting fixing in position in RCC or

masonry as per drawing & design etc.

including scaffolding etc complete as directed

by Engineer in charge

31 P/F in position collapsible steel shutter with 5.00 5783.97 Smt

vertical channel 20x20mm braced with flat iron

diagonal 20x5mm size with top and bottom rail

of T-iron 40x40x6mm with bolt, nut, washer,

locking arrangement, stopper, handle including

a coat of red oxide primer and two coat of

enamel oil paints of approved quality brand and

shade etc complete as directed by E.I.C.

32A Providing and applying 15mm thick smooth 4030.00 201.40 Smt

cement plaster in single coat on brick/ concrete

wall for interior/exterior plastering for ground

floor up to floor two level in true line and level in

C.M. 1:4 ( 1 cement : 4 coarse sand ) including

finishing even and smooth with floating coat of

neat cement slurry including scaffolding , curing

etc complete as directed by Engineer in-charge

For Ground Floor

32B For First Floor 3920.00 226.22 Smt

32C For Second Floor 3630.00 251.04 Smt

33A Providing and applying 10mm thick smooth 2470.00 164.34 Smt

cement plaster in single coat on brick/ concrete

wall for interior/exterior plastering for Ground

floor up to floor two level in true line and level in

C.M. 1:4 ( 1 cement : 4 coarse sand ) including

finishing even and smooth with floating coat of

neat cement slurry including scaffol0ing , curing

etc complete as directed by Engineer in-charge

For Ground Floor

33B For First Floor 2470.00 189.15 Smt

33C For Second Floor 2360.00 213.97 Smt

34 Providing and Applying 20 mm. thick sand 7300.00 300.66 Smt

faced Cement Plaster on wall surface at any

height above ground level consisting of 12 mm.

thick backing coat of C.M. 1:3 (1 Cement:

Sand) and 8 mm. thick finishing coat of C.M.

1:1 (1 Cement: 1 Sand) in true line level

including cost of scaffolding curing etc

complete As directed by E.I.C.

35 Providing & Applying Finishing wall with 6200.00 114.53 Smt

weather proof exterior emulsion paint on wall

surface ( Two coats ) to give an required shape

even shade after thoroughly brushing the

surface to remove all dirt and remains of loose

powdered materials to give an approved

quality, brand and manufacture and of required

shade of approved brand & mfg etc.

36 Providing and fixing 20 mm thick wire cut clay 1100.00 2067.87 Smt

brick tile cladding using approved quality

exposed brick tiles of approved size, colour and

texture on prepared RCC/brick/block masonry

surface with approved polymer-modified

cement mortar/adhesive as per manufacturer's

specifications. Joints shall be 8–10 mm wide,

filled with matching cement mortar or pointing

compound, including surface preparation,

scaffolding, cutting, wastage, curing, cleaning,

and all labour, materials, tools, and incidental

charges, complete in all respects as directed by

the Engineer-in-Charge.

37 Providing and laying 24"x24" Vitrified 8mm 2610.00 1406.22 Smt

thick tiles in flooring over 20mm (average) base

of Cement mortar 1:6 (1 cement: 6 sand) on

new surface or fixing on exiting flooring by

adhesive material including dismantling of

existing flooring and jointed with colour cement

slurry with adhesive solution including fishing

with flush pointing and cleaning the surface etc.

true line level and slope jointed including

curing rubbing polishing etc. comp. As directed

38 P & L 24" x 24" vitrified 10 mm thick tile flooring 1890.00 1397.83 Smt

over 20 mm (average) base of cement mortar

1:6 ( 1 cement: 6 coarse sand) on new surface

or fixing on existing flooring by adhesive

material including dismantling of existing

flooring and jointed with color cement slurry

including finished with flush pointing & cleaning

the surface etc. complete for Antiskit

39 Providing and laying white glazed tiles 6mm 270.00 917.25 Smt

thick in flooring treads of steps and landing laid

on a bed of 12mm thick cement mortar 1:3 (1-

cement : 3-coarse sand ) finishing with flush

pointing in white cement P127/14008AA

40 Providing and laying colored glazed tiles of the 1860.00 1417.36 Smt

size 300 mm x 600 mm x 8/300 mm x 450 mm

x 8 mm in skirting, risers of steps and dedo on

with10 mm. thick cement plaster 1:3 (1 cement

: 3 coarse sand) & jointed with white cement

41 Providing and laying Polished Granite Slab 410.00 2126.23 Smt

(18mm thick ) in flooring treads of steps laid on

a bed of 20mm thick base of C.M. 1:6 (1

cement 6 sand) or L.M. 1:5 laid in true line level

and slope jointed with white cement, colour

pigment, adhesive solution including curing

rubbing polishing etc. comp. As directed by

Engineer in-charge

42 Providing and Fixing Granite Telephonic Black 490.00 2506.82 Smt

Colour 15 to 18mm thick for jambs and sills of

doors & windows using neat cement slurry laid

over 20 mm average base of cement mortar

1:1(1 cement:1 Coarse Sand) and jointed with

grey cement slurry including racking (Tancha

Work) rubbing and polishing, scaffoldings, tools

and tackles, scaffolding etc. complete(with

base of neat cement) as per direction of

Engineer in charge including rounding the

exposed edges as directed.

43 Constructing of platform (sandwich type) 68cm 381.00 3795.18 Smt

width and 80cm high resting on thick

sandwiched polish Granite Slab in C.M 1:3 with

providing and fixing 25 mm thick rough kota

stone at bottom and 20 to 25 mm thick Polish

Granite stone (single piece/ telephonic Black)

top & Vertical and polished granite stone

(single piece/ telephonic Black) 20 to 25mm

thick on top & 18mm thick in Vertical with

15mm high machine cut polished granite round

moulded Top facia patty including polishing etc.

complete as per Engineer in charge Complete.

44 Providing and laying and fixing 25mm average 360.00 1653.00 Smt

thickness double Polished Kotah stone shelves

in masonry making necessary grove and good

same with cement mortar 1:2 (1 cement

sand) laid in true line level and jointed with gray

cement slurry incl. rubbing etc. comp, as

directed by E.I.C

45 Labor charges for making round edge to kotah 2080.00 205.07 Rmt

stone /marble/ marbo granite tiles etc. as

directed incl. all cost of labour & material incl.

necessary cleaning the surface etc. comp. as

directed by E.I.C.

46 Providing laying &fixing 25mm thick polished 2530.00 965.59 Smt

kotah stone slab flooring over 20mm(average)

thick base of cement mortar 1:6 (1 cement :

coarse sand) laid in true line &level and slope

including jointed with gray cement slurry

including curing rubbing and polishing etc

complete as directed by Engineer in charge

47 Providing & Applying acrylic oil bound 11270.00 127.97 Smt

washable distemper (two coats) of approved

brand of required shade on wall & Ceiling

surface to apply one coat of putty and primer

to give an even and smooth on wall surface

including repairing Patch after thoroughly

brushing the surface free from mortar drops

and other foreign matter and also incl.

preparing the surface even & smoothed,

complete as directed by Engineer in-charge

48 Providing & Applying acrylic Plastic paints (two 7300.00 127.97 Smt

coats) of approved brand & manufacture and of

required shade on Ceiling surface to apply one

coat of putty and primer to give an even and

smooth on wall surface including repairing of

patch with plaster of Paris after thoroughly

brushing the surface free from mortar drops

and other foreign matter and also incl.

preparing the surface even & smoothed,

complete as directed by Engineer in-charge.

49 Providing and applying general insecticide pest 2560.00 89.28 Smt

control treatment to floors cupboards etc

including labors materials etc complete as

directed by Engineer in charge

50 Providing and Laying china mosaic flooring for 3100.00 931.45 Smt

plain and curved surface. (A)The first applying

neat cement slurry 2.75 Kg/sqmt with admixed

waterproofing compound mixing FBR

FAIRCRETE polymer @ 1.00 bag/150ml after

cleaning the surface preparing base surface (B)

The second aplying 50mm thick cement

concrete flooring 1:2:4 ( 1 cement 2 coarse

sand graded stone agg. of 20mm nominal size

B.T. kapchi) laid in one layer with admixed

water proof compound mixing FBR

FAIRCRETE polymer @ 1.00 bag/150ml (C)

Third aplying laid over cement mortar bedding

at 15mm thick cement mortar 1:4 to plain or

slope with cement floating coat (D) Four

aplying 12mm to 20mm of Brocken piece made

on site from full size white glazed tiles to be

and to be tempered to bring mortar ceramic up

to surfaces with using white cement pigment

including rounding of junction and extending

them up to 10 cms along the wall and curing

with bends any pattern of design as per

drawing or direction including cleaning with

water and oxalic acid etc. complete.

51 Providing and fabricating and fixing square 4168.00 139.04 Kg

CRC pipe for the railing, in parapet, stair

terrace etc including fabricating, hoisting fixing

in position with angle cleats etc in RCC or

masonry etc. including applying one coat of rd

oxide primer paint and two coats synthetic

enamel oil paint of approved quality and shade

enamel paint, including scaffolding etc

complete as directed by Engineer in charge

52 Providing & fixing Openable aluminum colour 110.00 4771.29 Smt

anodized section Cup board Shutter with

Zindal frame section of 20024 , shutter Vertical

section of 22857 ,Top & Bottom section of

20086 section, including 5 mm thick Modi/HNG

or equivalent grey /plain glass , including

necessary fixtures & fastening such as 100 mm

hinges, 150 mm handle ,150 mm stopper , door

lock, etc. Zindal make section as per detail

design drawing given etc. comp.as directed by

53 Providing & filling in sunk slab with ‘Cinder’ 90.00 799.60 Cmt

including ramming , consolidating etc complete

as directed by Engineer in charge

54 Providing and laying Ordinary Cement, 390.00 336.05 Smt

Concrete 40mm thick flooring 1:2:4 ( 1 cement

:2 coarse sand :4graded stone agg. of 20mm

nominal size B.T. kapchi) with mixing FBR

polymer Water proofing Component for

1.00Bag / 200 Ml. in true line and level

including necessary exposed surface one layer

smooth finishing with a floating coat of neat

cement and curing etc. complete but excluding

cost of reinforcement etc comp as directed by

55 Providing and fixing pre-cast Rubber Dye / 450.00 686.90 Smt

steel Dye inter locking concrete block 60mm

thick with grade of concrete M300 pneumatic

compressed / vibrated mechanically and as per

approved design Confirming to IS 15658 :

including 35 mm Sand layer for levelling and

filling the joint with sand in proper line and level

as per guidelines of IRC : SP 63-2018 etc.

56 Providing and Fixing Glass Reinforced 380.00 2777.50 Smt

Concrete panels in approved size. colour,

pattern and thickness of unis tone or

equivalents make with compressive strength of

min M40 grade made of 53 grade white cement

and rasins as specified icl. installation as dry

fixing with SS 308 studs, fixtures, fastners with

screen paneling in true line level including cost

of scaffolding curing etc complete As directed

(B) PLUMBING AND SANITARY WORK

1A Providing laying and jointing in true line and 150.00 72.65 Rmt

level dia. U.P.V.C. Pipe (SCH- 40) for cold

water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two meter

C/C or shall be concealed as directed including

necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive

solvent, including cost of all materials For

1B 25 mm dia 490.00 91.84 Rmt

1C 32 mm dia 450.00 119.15 Rmt

1D 40 mm dia 450.00 148.12 Rmt

1E 50 mm dia 490.00 195.67 Rmt

2A Providing and fixing PVC Heavy duty "poonam" 5.00 555.50 No

or Eq. make fully valve include joining with

solution and leak proof joint etc of approved

quality and brand including fixing in proper pipe

line in position including testing the joints for no

leakage as directed by Engineer in charge. For

3 Providing and fixing vitreous China flat back 41.00 2430.81 No

Wash basin 550 x 400 mm size in white or

colour wash basin SOLO Make (suprim

Design) with single hole for pillar tape with

Pedestal OLO Make (suprim Design) Std.

Quality including cutting holes, 15 mm pillar

tape AQUEL Make (Grenel Design GR06-17),

captain head, screw down, high pressure with

sank screw and back nut washer, with C. P.

brass waste coupling 32 mm dia, with 15 mm

C. P. brass stop tape AQUEL Make (Grenel

Design GR06-18) and 32 mm dia rigid P. V. C.

waste pipe and making good the same as

directed by Engineer In- Charge.

4 Providing and fixing water Closet Squatting 2.00 1291.99 No

(ORRISSA TYPE W.C. PAN ) size 580mm first

quality including necessary "P" or "S" trap,

including jointing the trap with pan & soil pipe

in viterous chine white colour, Joints shall be

pipe sealent. By EIC

5 Providing and fixing glazed earthenware cera 34.00 6097.17 No

make Wall HUNG Europen type water closet

EUROPEAN TYPE W/C PAN of size

555x360x390 mm including seat cover

including cutting holes in walls and making

good the same connecting the flush bend with

cistern and closer (over flow pipe to be

measured and paid for separately) (A)

Vitreous(i) White colour etc. Complete as

directed by Engineer-in-Charge.

6 Providing and fixing 15mm dia AQUEL Make 99.00 722.15 No

(Grenel Design GR06-20) chromium plated

bass screw down bib cock including fixing in

pipe line in position as directed including

testing etc complete as directed by Engineer in

7 Providing and fixing P.V.C Nahni trap of 75 mm 111.00 606.08 No

dia inlet and 75 mm dia outlet nominal diameter

of self-cleaning design with P.V.C. grating

including fixing P.V.C. reducer of 110 mm dia

to 75 mm dia and jointing with adhesive solvent

cement including cost of cutting and making

good the walls and floors etc complete as

directed by Engineer in charge

8 Providing and fixing S.W. gully trap with C.I. 4.00 1292.19 No

grating brick masonry chamber and water tight

C.I. cover with frame of 300mm x 300mm size

(inside) with standard weight.(i) Square mouth

traps. (A) 100mm x 100mm size P type

9 Providing & fixing on wall face 90mm dia PVC 406.00 397.34 Rmt

rainwater pipe of “Finolax or eqv. make” with

top and bottom el-bow necessary coupling if

any incl. filling the joints with adhesive fitted air

& water tight with M S clamps testing etc

complete as directed by Engineer in charge

10 Providing laying & jointing to level and slope 83.00 133.97 Rmt

40mm dia rigid PVC pipes of working pressure

6 kg/Sqmt for “Vertical /Horizontal drainage “

Finolex make line for wall & floors including

necessary fitting such as bends , tees , "

Dutron make "PVC clamps rubber packing ring

etc testing of pipe line , jointing with adhesive

solvent cement including cost of jointing

materials and all other necessary fixtures

fitted air and water tight testing the line etc

complete as directed by Engineer incharge

11 Providing laying & jointing to level and slope 215.00 211.88 Rmt

75mm dia rigid PVC pipes of working pressure

6 kg/Sqmt for “Vertical /Horizontal drainage “

Finolex make line for wall & floors including

necessary fitting such as bends , tees , "

Dutron make " PVC clamps rubber packing ring

etc testing of pipe line , jointing with adhesive

solvent cement including cost of jointing

materials and all other necessary fixtures ,fitted

air and water tight testing the line etc complete

as directed by Engineer in charge

12 Providing laying & jointing to level and slope 90 416.00 315.25 Rmt

mm dia rigid PVC pipes of working pressure

kg/Sqmt for Horizontal drainage “Finolex make

line & floors including necessary fitting such as

bends , tees, " Dutron make " PVC clamps

rubber packing ring etc testing of pipe line

jointing with adhesive solvent cement including

cost of jointing materials and all other

necessary fixtures, fitted air and water tight

testing the line etc complete as directed by

Engineer inc harge

13 Providing laying & jointing to level and slope 867.00 417.52 Rmt

110mm dia rigid PVC pipes of working

pressure 6 kg/Sqmt for “Vertical /Horizontal

drainage “ Finolex make line for wall & floors

including necessary fitting such as bends , tees

, " Dutron make "PVC clamps rubber packing

ring etc testing of pipe line , jointing with

adhesive solvent cement including cost of

jointing materials and all other necessary

fixtures , fitted air and water tight testing the

line etc complete as directed by Engineer in

14 Providing laying & jointing to level and slope 70.00 671.91 Rmt

160 mm dia rigid PVC pipes of working

pressure 6 kg/Sqmt for “Vertical /Horizontal

drainage “ Finolex make line & floors including

necessary fitting such as bends , tees , "

Dutron make " PVC clamps rubber packing ring

etc testing of pipe line , jointing with adhesive

solvent cement including cost of jointing

materials and all other necessary fixtures

fitted air and water tight testing the line etc

complete as directed by Engineer in charge

15 Providing and fixing 75 mm dia PVC cowel 10.00 393.04 No

vent with flap open PVC clamps including fixing

with led and spun yarn fitted air and water tight

etc. comp. As directed by E.I.C.

16 Providing and fixing 110 mm dia PVC cowel 10.00 505.17 No

vent with flap open including fixing with led and

spun yarn fitted air and water tight etc. comp.

As directed by E.I.C.

17 Providing laying and constructing brick 50.00 2932.93 No

masonry chamber of following internal

dimension BK chamber for underground C.I.

bend with brick of best quality having crushing

strength not less than 35kg/cm2 in C.M. 1:5 (

sand : sand) C.I. cover with frame (light duty )

of 600mm x 450mm internal dimension 750mm

deep total weight of cover minimum 38kg/(wt.

of cover minimum 23 kg wt. and wt. of frame

15kg) with RCC top slab with 1:2:4 ( 1 cement :

2 coarse sand : 4 graded stone kapchi)

foundation concrete 1:5:10 ( 1 cement :

coarse sand: : 10 brick bats of 40mm nominal

size) inside plaster 15mm thick with C.M. 1:3 (

1 cement : 3 coarse sand) finished wmooth

with a floating coat of neat cement slurry on

walls and bed concrete making channels for

easy flow in floors, including testing etc

complete as directed by Engineer in charge

18 Providing and fixing Sintex Premium Range 8000.00 12.89 Ltr

heavy duty white triple layer water storage tank

TLW outer side white layer intermediate black

layer inside sky blue layer tank made with

% virgin Plastic material etc as directed by

Engineer in charge

19 Providing & fixing 25mm dia C.P. brass half 4.00 275.76 No

turn flush cock of approved brand including

fixing the same in pipe line and testing et

complete as directed by Engineer in charge

20 Providing and fixing 600mm x450mm bevelled 66.00 833.73 No

edge mirror of superior glass , mounted on

6mm thick A.C. sheet or ply wood sheet

including fixing 600 mm x 120 mm glass

shelves fixed with wooden plug with use of C.P.

brass screw & washer to the wall as directed by

Engineer in charge

21 Providing & fixing C.P. brass towel rail 600mm 1.00 603.19 No

x 20mm size complete with C.P. brass bracket

fixed to wooden plug with C.P. brass screw etc

complete as directed by Engineer in charge

22 Providing & fixing Stainless steel Sink (Nirali or 39.00 3201.70 No

Nilkamal make )Size 600mm x 450mm fix in

Kit plat form with Cement mortar in 1:3

including fitting 32mm dia C.P. brass waste

coupling approved quality with 32mm dia

rigid P.V.C. waste pipe including making the

good the floors walls etc complete as directed

23 Providing and constructing Soak well of internal 2.00 55262.83 No

dia 3.00 m and depth is 3.05 mt internal clear

dimension including the cot of excavation

foundation for honey combed masonry of

mt. height in C.M. 1:6 ( 1 cement : 6 coarse

sand) casting RCC 1:2:4 12mm th. (1 cement:

2 sand : 4 graded stone aggregate 20mm

nominal size) cover slab with C.I. cover of

m x 0.45 m size of 35 kg wt. and 75mm dia

cowl vent & 75mm dia C.I. pipe 1.80 mt. length

and filling the wall is 1 mt in depth with dry brick

bats including providing vata in C.M. 1:3 (

cement : 3 sand) curing etc complete including

cost of reinforcement for slab et complete as

directed by Engineer in charge

24 Providing and constructing B.B. masonry & 2.00 81443.57 No

cement concrete Septic tank 5.50x 2.25x

2.50m depth internal dimension with excavation

& depositing off the excavated stuff as and

where directed including providing laying brick

masonry in C.M. 1:6 ( 1 cement : 6 sand) with

using common brick common burnt clay

conventional building brick having crushing

strength not less than 35kg/sqmt for necessary

compartment for chamber & septic tank with

necessary inlet & outlet with cement plaster

15mm thick on wall I.P.S. flooring bed concrete

RCC Top slab. M H cover 60mm x 45mm x

C.I. air vent pipe with cowl cement vata of

10cm x 10cm size in C.M. 1:1etc complete as

directed by Engineer in charge

25 Providing & Fixing 25mm Dia Chromium Plated 30.00 2999.70 No

Metropole Flush cock of BENELAVE MAKE

CAT NO:BLACP07092 or jaquar FLV-1085DFP

or Aqual-FV 05 S Series .including Fixing in

pipe line etc. complete including making the

good the floor walls etc complete as directed by

Engineer in charge

26 Providing & Fixing 8 mm Dia Chromium Plated 30.00 977.68 No

brass/stainless steel jet with flexible tube up to

1 meter long with S.S. triangular plate to WC

PAN and hook fixing in pipe line etc complete

as directed by Engineer in charge

27 Providing and fixing Urinal or approved quality 30.00 1036.27 No

including connecting the Urinal with waste pipe,

tap etc. complete.(A) White earthenware flat

back or corner type size 430mm x 260mm x

(C) ELECTRICAL WORK:-

1 Point wiring for Light / Bell with 2-1.5 sq.mm 1652.00 449.45 Pt.

& earth wire of 1.5 sq.mm (Green) both are of

ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length

in below type of pipe erected with 6A Modular

type switch / bell push & accessories and earth

continuity of following type, erected on PVC /

Metallic/Wooden box, single mounting base

frame covered with textured/metallic/white

front plate modules erected on / in wall / ceiling

as per pipe erected, with necessary Lamp

holder/ceiling rose / H.D. Connector as

directed. (a) with medium class Rigid PVC pipe

and accessories erected flushed on wall /

ceiling complete Cat.III.

2 Providing following type of Modular Type 650.00 303.00 No.

Accessories mounted with PVC /

metallic/Wooden box, single mounting base

frame covered with textured / metallic/white

front plate , modules erected with necessary

connections as per site situation directed by

Engineer In charge. (1) One No. SP 6 Amp.

Switch (2) One No 3 pin plug Cat.III.

3 Providing following type of Modular Type 316.00 380.77 No.

Accessories mounted with PVC /

metallic/Wooden box, single mounting base

frame covered with textured / metallic/white

front plate , modules erected with necessary

connections as per site situation directed by

Engineer In charge. (9) 16 Amp. SP one way

switch & (10) 16 Amp. Universal socket Cat.III.

4 Supplying & erecting fan hook box of 10 mm 330.00 108.07 No.

M.S. round bar bounded to the RCC bars up to

50mm length each side and pierced through a

16 Gauge M.S. box / Heavy Duty PVC box

complete erected concealed in Ceiling with

necessary finishing.

5 Providing 2.5mm thick laminated acrylic sheet 330.00 18.18 No.

to cover the fan hook or Fan box.

6 Providing following type of Modular Type 330.00 398.95 No.

Accessories mounted with PVC /

metallic/Wooden box, single mounting base

frame covered with textured / metallic/white

front plate, modules erected with necessary

connections as per site situation directed by

Engineer In charge. (5) Electronic hum Free

four or more steps EME Fan regulator Cat.III.

7 Providing & erecting Approved make Ceiling 317.00 1948.29 No.

Fan with double ball bearing ISI mark with

Condenser 230 volt A.C.50 Hz 1200 mm

sweep complete having 3 blades aluminium

body and blade sets having ornamental design

shanks , canopy erected with earthing. [Make

shall be approved by Engineer in Charge].

8 Supply, Installation, Testing and 10.00 3356.23 No.

Commissioning of suitable sweep, BEE 5 Star

rated, Ceiling fan with Brush Less Direct

Current (BLDC) permanent ferrite magnet

Motor, class of insulation: B, Rust free

nos.Aluminium blades, 2 nos. canopies,

shackle kit with earthing provision, copper

winding, Power factor not < 0.9, Service Value

(CMM/W) minimum 6.85, Air delivery minimum

215 CMM, 350 RPM,230v (tolerance as per IS :

374-2019), THD < 10%, with remote unit for

Speed Control and all remaining accessories

including safety pin, nut bolts, washers,

temperature rise = 75 degree C (Max.),

suitable for 140 to 285 Voltage and rectifier

circuit with surge, over current and overload

protection , 50 Hz, Single phase AC Supply,

earthing etc. Complete as required. [Make shall

be approved by Engineer in Charge] (C)

mm Sweep (56").

9 Supplying & erecting single phase approved 21.00 2054.34 No.

make industrial exhaust fan suitable for

medium duty ring mounted low noise operation

suitable for medium duty having following dia

size and maximum speed in RPM[A] 305 mm

dia 900 RPM Cat.II.

10 Providing following type of Modular Type 69.00 697.91 No.

Accessories mounted with pvc / metallic box,

single mounting base frame covered with

textured / metallic front plate , modules erected

with necessary connection. As desired by

Engineer In charge (9) 16 Amp. SP one way

switch (22) 16/20/25 Amp. Modular Starter for

Motor / A.C. Unit Complete Cat.III.

11 Supplying and erecting LED indoor fittings with 1304.00 295.93 No.

LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing

used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513 / CRCA /

aluminium die cast powder coated and high

U.V. & corrosion resistance with diffuser with

company mark / name 160V to 270V, Power

Factor more than 0.95, THD < 15%, CCT

K to 6500K, Luminaire efficacy>

lumens/watt, LED driver efficiency > 85 %

(fitting required LM-79 & LM-80 Certificates)

(NOTE: Below description have shown ranges

of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage

capacity between the ranges shown.)(A) Tube

Light with integral driver (iii) 18-20 Watts, Surge

- 2KV,IP-20, conventional 4 feet Cat-lll.

12 Providing and erecting ISI mark Medium class 2084.00 33.33 Mtr.

RIGID PVC PIPES of following size complete

to be erected on/in wall or ceiling erected with

necessary PVC fittings & Junction boxes fixed

with adhesive solution & Clamps with following

dia of pipes, in approved manner as directed

13 Providing and erecting ISI mark Medium class 1406.00 44.44 Mtr.

RIGID PVC PIPES of following size complete

to be erected on/in wall or ceiling erected with

necessary PVC fittings & Junction boxes fixed

with adhesive solution & Clamps with following

dia of pipes, in approved manner as directed

For Laying of Pipes on Stone Wall add to the

following item rate per meter (b) 25 mm.

14 Providing and erecting Mains with 1.1 KV grade 3842.00 62.62 Mtr.

FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe

to be erected concealed in /flushed on

wall/ceiling, with 1.5 sq. mm copper conductor

FRLS PVC insulated stranded wire of green

colour for earth continuity of following size (E)

in existing pipe (b) 2 wire 2.5 sq. mm.

15 Providing and erecting Mains with 1.1 KV grade 6657.00 86.86 Mtr.

FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe

to be erected in / on wall / ceiling with 2.5 sq.

mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth

continuity of following size (E) in existing pipe

(a) 2 wire 4 sq. mm.

16 Providing and erecting Mains with 1.1 KV grade 860.00 46.46 Mtr.

FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe

to be erected concealed in /flushed on

wall/ceiling, with 1.5 sq. mm copper conductor

FRLS PVC insulated stranded wire of green

colour for earth continuity of following size (E)

in existing pipe (a) 2 wire 1.5 sq. mm.

17 Bakelite adopter for Holder to be erected. 1304.00 9.09 No.

18 Point wiring for Two Way Controlled Light Point 9.00 567.62 Pt.

with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(green) both are of .ISI marked 1.1 KV grade

FRLS PVC insulated multi strand copper wires

erected in below type of pipe with 6A Modular

type switches and following type of accessories

erected on PVC / Metallic/Wooden box, single

mounting base frame covered with textured /

metallic / white front plate modules erected on /

in wall / ceiling as per pipe erected. with

necessary batten/angle holder or ceiling rose or

H.D.Connector as directed. (a) with medium

class Rigid PVC pipe and accessories erected

flushed on wall/ceiling complete Cat.III.

19 Providing and erecting Sheet Steel powder 30.00 2913.85 No.

coated MCB distribution board - flush / surface

mounted fitted with busbar, neutral link, earth

bar and DIN rail, Conforms to IS 8623-1 &

IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs. (The DBs should be

used of same company of MCB to be used)

suitable for (B) three phase incoming and

single phase horizontal type outgoing Per

phase isolation type (PPI) (b) sheet steel

double door (i) 6way.

20 Providing & erecting 415 V MCB Four Pole for 531.00 595.90 No.

Motor & Inductive Load (C Curve) having

10KA breaking capacity & confirms to IS :8828

in existing box having following capacity (a)

to 32 Amp.Cat.IIl.

21 Providing and erecting Miniature circuit breaker 540.00 112.11 No.

single pole 6A to 25A suitable to operate on

240 V A.C. system and having breaking

capacity 10 KA to be erected in existing box.

Confirming to IS 8828/1996 with ISI Mark

22 Providing and erecting Approved make Four 2.00 16221.61 No.

pole moulded case circuit breaker having

breaking capacity ICU of 35 KA. at 415 V.

having Normal current rating 200A.with variable

Thermal & magnetic release suitable to work

on A.C. supply 50 c/s. with all internal

connections, spreader tinned copper &

complete erected in existing 16 G.M.S.

housing. Cat III.

23 Providing and erecting Approved make Four 30.00 6173.12 No.

pole moulded case circuit breaker having

breaking capacity ICU of 25 KA. at

V,having normal current rating up to 25 A to

100A. with Fixed thermal & magnetic release

suitable to work on A.C. supply 50 c/s. with all

internal connections, spreader tinned copper &

complete erected in existing 16 G.M.S.

housing.Cat III.

24 Providing and erecting busbar chamber 9.00 3061.31 Rmt

confirming to IS-375 fabricated from 16 G.M.S.

sheet, dust & vermin proof having hinged door

with rubber gasket and necessary busbar

supports with Aluminium busbar having current

density not more than 0.8 Amp. / sq.mm (Rated

current / cross section area) duly wrapped with

colour insulation tape for phase sequence,

three phase & neutral each Suitable for

following current capacity with necessary

painting mounted on wall or pedestal frame of

required size with necessary connections.

B) Suitable for 200 Amp. Capacity.

25 Supplying & erecting earth pit of minimum bore 5.00 7095.25 No.

dia.150mm size approved make Earthing

Electrode consisting Pipe-in-Pipe Technology

as per IS 3043-1987 made of corrosion free hot

dipped G.I.Pipes having Outer pipe dia of

50mm having 80-200 Micron galvanising, Inner

pipe dia of 25 mm having 200-250 Micron

galvanising, connection terminal dia of 12mm

with constant ohmic value surrounded by highly

conductive compound with high charge

dissipation suitable for following type of

applications with chamber and heavy duty

cover. (A)(approved make OEM has to submit

test certificate including value of earth

resistance of installation duly stamped and

signed by agency and officer Incharge has to

ensure the value of earthing resistane

mentioned in test Certificate) & having back

filling compound of (B) Inner chemical (CCM

Compound)- Resistivity:- 0.2 ohm / meter

testing as per IEC 62561-2017, Voltage drop:-

< 1 volt at no load & dry form, Sulphar content:-

<2%(C) Back fill Compound :- Earthing

compound should be capable to retain moisture

for long time Necessary test report must be

submitted by Agency.(b)For Electrical

installation up to 11 KV in normal soil. Length

of Pipe: 2.00 mtrs Back filling Compound: 1 no.

26 Providing one bag of 25 Kg. Additional Back 6.00 707.00 No.

Filling Compound (BFC) suitable for safe

earthing device.

27 Providing and erecting Annealed bare Copper 220.00 794.87 Kg.

wire 8 to 16 SWG.

28 Providing and erecting Approved make RCCBs 60.00 2235.13 No.

conforming to IS: 12640 and having sensitivity

of 30 mA and Short Circuit withstand capacity

of 10 KA and suitable for operation on single

phase 240 V,50Hz. having characteristic of

quick action & tripping with all advance feature

& do not incorporate any electronic component

for following Max. rating erected as directed (ii)

40Amps. DP Cat. III.

29 Providing and erecting Mains with ISI marked, 340.00 142.41 Mtr.

1.5KV grade electrolyte multi stranded,

annealed copper conductor with heat resistant

PVC insulated conforms to IS 694, IEC -

erected in existing pipe of following size

(Specifically for control panel, relays, power

switchgears, motor starters & control wiring)

with required size of copper lugs, nuts and

bolts if required.(g) One wire 16.00 sq. mm.

30 Providing and erecting XLPE(IS:7098)(I)-88 ISI 2621.00 1504.90 Mtr.

armoured cable multistrand Copper

conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe

at road crossing or floor of following size of

cables.(C) 4 core 25 Sq. mm.

31 Solder less crimping type Copper lugs 60.00 15.15 No.

conforming to IS suitable for cable of following

size evenly crimped with high pressure tool &

connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved

manner. (D) 25 Sq.mm.

32 Solder less crimping type Copper lugs 70.00 12.12 No.

conforming to IS suitable for cable of following

size evenly crimped with high pressure tool &

connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved

manner. . (C) 16/Sq.mm.

33 Providing and fixing approved make Perforated 1035.00 622.16 Mtr.

C type cable tray. Made from sheet steel. The

cable tray should be single or double bended

as per required and as per IS 2062/1079 and

shall be coated with hot dip galvanizing as per

IS 2629/4759. with max 17.5% perforation with

coupler plate / Fish plate and GI hardware like

nut - bolt and washers etc. erection with

necessary support (included) as per

Specification and as per instruction of engineer

in charge. (5) 300 X 50 X 2.0 mm Thick.

34 Providing and fixing approved make 'T' 150.00 291.89 No.

Junction for Perforated C type cable tray.

Made from sheet steel. The Junction should be

bended as per IS 2062/1079 and shall be

coated with hot dip galvanizing as per IS

2629/4759. with max 17.5% perforation with

coupler plate / Fish plate and GI hardware like

nut - bolt and washers etc. erected on existing

support as per Specification and as per

instruction of engineer in charge of following

size (5) 300 X 50 X 2.0 mm Thick.

35 Providing and fixing approved make '90° Elbow' 150.00 245.43 No.

for Perforated C type cable tray. Made from

sheet steel. The Junction should be bended as

per IS 2062/1079 and shall be coated with hot

dip galvanizing as per IS 2629/4759. with

coupler plate / Fish plate and GI hardware like

nut - bolt and washers etc. erected on existing

support as per Specification and as per

instruction of engineer in charge. (5) 300 X

X 2.0 mm Thick.

36 Providing & erecting weather proof, dust & 17.50 19387.96 Smt

vermin proof, floor mounted front operated

indoor type cubical panel board necessary IP-

42 and above protection as per approval from

engineer in charge made from 14 SWG thick

CRC M.S. sheet for outer body & doors,

SWG thick CRC M.S. sheet for internal

partitions with necessary accessories

supporting angles/ flats channel including

cutting, bending, drilling, welding, riveting with

internal partitions & cable alley as per

requirements & instruction of engineer-in-

charge with erection of supplied switch gears,

BUSBARS, suitable size of inter connecting

PVC copper wire / copper-aluminum strips,

rubber grommets, rib, Bakelite control

fuses/MCB for measuring instruments, earth

bus & earth bolts, foundation flange - bolts-

base Plates, sufficient nos. of hinged doors,

handles with locking arrangement and rubber

gasket, heavy duty end terminal connection,

danger notice board, necessary ventilation,

earthing strip complete. The Panel shall be

painted with epoxy powder coating. (The rates

excludes the cost of switchgears, bus bars,

inter connecting mains & Copper Aluminum

strips, meters, Fuses etc. The dimension shall

be measured excluding base beams) The

panel shall be supplied with following approved

manufacturers with following size. (B) The

standard companies switch gear shall be used

and only manufacturers at CPRI approved

factory (ii) with 550 mm. Depth.

37 Providing & installing type 1+2 AC Surge 1.00 14513.37 No.

Protection Device (SPD), TP+N Pole with

required accessories in the panel.

38 Providing and erecting Approved make Earth 1.00 4687.41 No.

fault Relay suitable to mount with inter

connection suitable to following size of molded

case circuit breaker having CT ratio & MCCB

rating as following along with shunt trip 220V

AC. with all internal connections & complete

erected in existing M.S. housing. (1) 15 A -100

A , CT Ratio 1/100.

39 Supplying and erecting approved make suitable 21.00 43.43 No.

panel indicator LED type lamp, lens cover,

complete erected with necessary connections.

40 Supplying and erecting approved make panel 7.00 1275.63 No.

mounting type Digital Voltmeter having 3 digits

LED display, 0 to 750 AC Volts range erected

on existing panel board with all connection,

wiring etc .with manufacturers calibration

41 Supplying and erecting approved make panel 7.00 1558.43 No.

mounting type Digital Ammeter having

digits LED display, external CT operated,

calibrated for 0 to 1000 Amps suitable to

operate on 500 Volt AC , erected on existing

panel board with all connection, wiring etc. with

manufacturers calibration certificate.

42 Supplying and erecting Ammeter / Voltmeter 7.00 317.14 No.

selector switch for 3 phase AC Supply 500 V

on existing panel board with necessary

43 Providing & erecting L.T. Current Transformer 3.00 274.72 No.

with bar primary 50/5 to 1000/5 ratio 15 VA

burden erected in existing CRCA box duly

secured with insulating materials connected to

44 Providing and erecting Approved make. Energy 7.00 4717.71 No.

meter 3 phase 4 wire unbalanced load 500 V.

50A/100A complete erected as directed with

necessary earth wire. With Suitable set of CTS

for 100A Energy Meter Cat. III.

45 Providing and erecting following additional 60.00 873.65 No.

parts for panel mounting MCCBs (A)Extended

operating rotary handle with pad lock with three

position trip,off,on suitable for 25A to 250 A

panel mounting Cat. III.

46 Neutral Link for 10.00 274.72 No.

47 Providing and erecting fabricating M.S. angle, 400.00 77.77 Kg.

flats bars, channels sectings complete with

cutting, welding griding and finishing dully

painted with one coat of red oxide with erecitng

on site as per direction of engineer incharge

with necessary gouting, cementing, plastering

& finishing etc complete.

48 Providing following type of Modular Type 520.00 25.25 No.

Accessories mounted with PVC /

metallic/Wooden box, single mounting base

frame covered with textured / metallic/white

front plate, modules erected with necessary

connections as per site situation directed by

Engineer In charge. (7) Blank Plate Single

49 Providing and erecting required size HOT deep 120.00 77.77 Kg.

Galvanized iron strip for earthing of H.T. , OCB/

ACB/ Transformer LT panel board, Motors etc.

using proper clamp.

50 Providing and erecting Mains with ISI marked, 510.00 27.27 Mtr.

1.5KV grade electrolyte multi stranded,

annealed copper conductor with heat resistant

PVC insulated conforms to IS 694, IEC -

erected in existing pipe of following size

(Specifically for control panel, relays, power

switchgears, motor starters & control wiring)

with required size of copper lugs, nuts and

bolts if required. (c) One wire 2.50 sq. mm.

51 Providing and, fixing heavy duty flange type 20.00 66.66 No.

brass double compression type cable gland

with rubber ring for PVC insulated armoured

cable complete without going tails, insulating

tape etc for following size of cables(A) 3 & 1/2 /

4 core 25 Sq. mm.

52 Providing and, fixing heavy duty flange type 25.00 140.39 No.

brass double compression type cable gland

with rubber ring for PVC insulated armoured

cable complete without going tails, insulating

tape etc for following size of cables.(E) 3 & 1/2

core 120 Sq. mm.

53 Providing and, fixing heavy duty flange type 30.00 47.47 No.

brass cable gland with rubber ring for PVC

insulated armoured cable complete without

going tails, insulating tape etc for following size

of cables. (D) 2 to 4 core 16 Sq. mm

54 Providing and erecting Mains with ISI marked, 168.00 470.66 Mtr.

1.5KV grade electrolyte multi stranded,

annealed copper conductor with heat resistant

PVC insulated conforms to IS 694, IEC -

erected in existing pipe of following size

(Specifically for control panel, relays, power

switchgears, motor starters & control wiring)

with required size of copper lugs, nuts and

bolts if required.(j) One wire 50.00 sq. mm.

55 Solder less crimping type Copper lugs 250.00 22.22 No.

conforming to IS suitable for cable of following

size evenly crimped with high pressure tool &

connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved

manner. (E) 50 Sq.mm.

56 Providing and erecting XLPE(IS:7098)(I)-88 ISI 60.00 6426.63 Mtr.

armoured cable multistrand Copper conductor

for 1.1 KV. to be laid on wall with necessary

clamps or in existing trench / pipe at road

crossing or floor of following size of cables.(F)

3 1/2 core 120 Sq. mm ( 70 Sq. mm 1/2

57 Providing & laying approved make Double 501.00 62.62 Mtr.

walled corrugated pipes (DWC) of polyethylene

(conforming to IS 14930 II) with necessary

connecting accessories of same material at

required depth in existing trench for laying of

cable. below ground / road surface for

enclosing cable (A)50 mm outer dia.

58 Supplying and erecting 19 / 20 mm. nominal 327.00 108.07 No.

bore Medium Class M.S. Pipe down rod

erected duly painted for fan complete with

proper insulation without leakage and earthing.

59 Providing and erecting Approved make RCCBs 2.00 4314.72 No.

conforming to IS: 12640 and having sensitivity

of 30 mA and Short Circuit withstand capacity

of 10 KA and suitable for operation on 3 phase

and neutral 415V,50Hz. having characteristic of

quick action & tripping with all advance feature

& do not incorporate any electronic component

for following Max. Rating erected as directed

(iv) 100 Amps. FP (100 mA Sensitivity) Cat. Ill

60 Supplying and erecting approved make 1.00 11411.99 No.

Octagonal pole made from HR sheet steel. The

pole should be made as per IS. and shall be

coated with hot dip galvanizing as per IS

2629/2633/4759, suitable suspend local wind

speed with integral Junction box consist of

terminal plate of min 6mm Hylam sheet,

standard profile 35mmX7.5mm Din-Rail for

MCB Mounting, stud type terminal and

arrangement for cable termination to be

erected With Suitable foundation (Included) as

per details given by manufacturer considering

site requirement. (E) 7 Mtr. Long 70 mm Top X

135 mm bottom dia, 3 mm thickness with

225mmX225mmX16mm base plate, 4-M20

Bolts and 600mm long with necessary G.I. J

Bolts .Approx Pole weight 67 kg.

61 Providing 1:2:4 cement concrete foundation & 1.00 809.01 No.

70 % PCC from bottom including excavation for

the pole of size 45 x 45 x 100 cm. Deep in

below ground level with plinth of 45 cm x 45 cm

(or 45 cm dia x 45 cm) high upper ground level

with necessary curing and finishing in approved

manner. (for 4 & 6 mtr pole).

62 Providing and erecting XLPE (IS:7098)(I)-88 ISI 40.00 140.39 Mtr.

armoured cable multistrand / Solid Aluminium

conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe of

following size of cables (C) 4 core 10 Sq. mm.

63 Supplying and erecting Four-way Connector 1.00 181.80 No.

63A 415V with screw and nutbolt as per

required E.T.C. comp.

64 Making trench in soft soil of suitable width of 90 30.00 55.55 Mtr.

cm deep for laying cable or locating the fault all

over the run and back filling the same and

making the surface as normal ground.

Sr. Description Amount

1 (A) CIVIL WORKS:-

2 (B) PLUMBING AND SANITARY WORK:-

3 (C) ELECTRICAL WORK:-

(RUPEES FOURTEEN CRORE FORTY SIX LAKH(S) FORTY THOUSAND(S) THREE HUNDRED

FORTY FOUR AND PAISE SIXTY SEVEN ONLY)