SPECIAL REPAIRS TO BUILDING NO. P-17, P-42, P-51 AND E-3/4F AT NHO, DEHRADUN UNDER GE CLEMENT TOWN

Amount

M & L for Non skid ceramic coloured joint freee tiles 600 x 600 (square / rectangular) of 7 to 8mm thick, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including screed bed of 15 mm thick in CM (1:6) including dismantling of floor hearth or wall tilling including cement mortar bedding (but not backing) and removing the rubbish off the premises complete all as specified and directed.

M & L for Non skid ceramic coloured joint freee tiles 600x 600 (square / rectangular) of 7 to 8mm thick, as in vertical surface such as dado/ skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including 10 mm thick rendering in CM (1:4) to recieve tiles including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing the rubbish off the premises complete all as specified and directed.

M&L for Non Skid ceramic coloured tiles 7 to 8 mm thick(square/ rectagular) area of each tile exceeding 0.06 sq m but not exceeding 0.11 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including 15mm thick screed bed in CM (1:4) including dismantling of floor hearth or wall tilling including cement mortar bedding (but not backing) and removing the rubbish off the premises complete all as specified and directed.

M&L for joint free glazed ceramic coloured tiles of size 300x450x7 mm thick on walls, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including 10mm thick rendering in CM (1:4) finish surface rough to recieve tile including Dismantling floor, hearth or wall tiling including bedding (but not backing) and removing the rubbish off the premises complete all as specified and directed.

Demolition of cement concrete in ground floor and paving n. exc 15 cm thick below or above GL complete all as specified and directed.

M &L PCC (1:3:6) type C-2 (using 40 mm graded crushed stone agreegate) as in sub base 75 mm thick complete all as specified and directed.

M&L for PCC (1:3:6) type C-2 using 40 mm graded crushed stone aggregate as in surface channel /drain complete all as specified and directed.

Supply only integral water proofing compound( Liquid) complete all as specified and directed.

M & L for rubber moulded chequered cement concrete tiles of size 30cm X 30cm X 25 mm thick with grey cement and pigment set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile as in floor over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed.

M & L for brick work with sub class "B" old size bricks straight or curved on plan exc 6 m mean radius built in CM (1:6) including demolition of old brick work complete all as specified and directed.

M&L for rendering 15mm thick in cm (1:6) on fair faces or other than fair faces of brick work or concrete surfaces finished fair and even complete all as specified and directed.

M & L 15mm thick rendering on brick work surfaces mixed with water proofing compound (liquid) as per manufacture instruction, finish the surface even and fair without using extra cement in CM (1:4) complete all as specified and directed. (Note :- WPC will be measured and paid separately.)

M & L for 10 mm thick plaster on fair faces of concrete, roof/ facia, fins etc in CM (1:3) finished even and smooth without using extra cement with WPC etc including taking down cement plaster complete all as specified and directed. (Note :- WPC will be measured and paid separately.)

M& L for Prepration of New plastered surface and applying three coats of white wash on concrete roof/ facia, fins complete all as specified and directed.

M&L two coats of weather proof emulsion paint in newly plastered surface over a coat of primer including preparing the surface complete all as specified and directed.

Complete removal of existing surface of wall preparation and applying two coats of weather proof emulsion paint over a coat of primer complete all as specified and directed.

Complete removal of existing surface of wall by scrapping, rubbing washing the old surface of wall including preparation the surface smooth by 2mm thick wall putty applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M & L for RCC (1:2:4) type B1 (using 20 mm graded crushed stone agg) as in slab and shelves supported on walls including demolition of reinforeced cement concrete of any description and in any position complete all as specified and directed.

M & L for Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M&L 16-18 mm thick granite stone slab in steps, jambs, pillars, jamb pillars, window-cills, cooking plateform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture og pigment to match with shade of granite tile complete all as specified and directed.

S&F 19 mm thick BWR ply wood type BB no of ply as per IS specified as in cup board of wardrobe fixed with powder coated screws, finished edges with PVC lipping as suitable colour of decorative lamination with all self closing typoe hinges , handles, knobs and magnetic catcher etc. complete all as specified and directed.

S & F Continuous (Piano) hinges, mild steel, bright finished or electro galvanized, width of flaps (When open) 30 mm complete all as specified and directed.

Taking down Chowkats exceeding 1.5 Sqm but not exceeding 4 Sqm each (Without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkhats or frames area not exc. 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down shutter of any description exc. 1 sqm but not exc. 2 sqm each complete all as specified and directed.

S & F solid PVC door frame of size 50mmx47mm made out of 5mm single side prelam PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with the prelam sheet reinforced with MS square tube, supply & fixing in opening incl necessary fixing arrangements as per specification & drawing complete all as specified and directed.

M&L for preparation of newly plastered wall surface and applying two coats of OBD over a coat of primer complete all as specified and directed.

S & F factory made solid panel PVC Door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and both side prelam PVC sheet used intead of plain colour PVC sheet for top rail,lock rail and bottom rail on either side as gap insert for top rails, bottom rail, panelling of both side prelam PVC sheet instead of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supply & fixing in the frame at site as per specification and drg complete all as specified and directed.

S&F 125X60 mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed.

S&F 105X60 MM Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed.

M&L 35 mm thick flush shutter solid core construction with block board core and ply wood face panels, commercial type both sides complete all as specified and directed.

M & L 35 mm thick 2nd class hard wood factory made glazed and skelton shutter, open rebated and prepared to receive glass, gauge etc. (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.23(a) complete all as specified and directed.

S&F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanesed wire stapels complete all as specifed and directed.

S & F of 100 mm long mild steel butt hinges, medium weight cold rolled complete all as specified and directed.

S&F 200 mm long,aluminium,anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 150mm size stainless steel handles,cast type,anodised all as directed complete all as specified and directed.

S & F of 300 mm long (Length of bolt) stainless steel, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy complete all as specified and directed.

M&L preperation of newly wooden surface over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed

M&L for preparation of old painted wooden surface any description not other wise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

S&F stainless steel extruded type 150mm long barrel tower bolts with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed.

S &F in repair framed work as in grills, grating etc with ends of bars shoulderd and reveted or forged into spike frameguard bars iron door etc conforming to Fe -410-0 or 310-0 complete all as specified and directed.

S&F welded steel wire fabric weight n exc 4 Kg per square metre fixed complete to steel member complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coats of red oxide primer on new steel surface etc complete all as specified and directed.

Taking up or down steel tubing 15 mm bore and connection including removal complete all as specified and directed from ceiling, floor or in wall.

S& F in repair steel tubes medium grade in any size or length galvanised with all fittings and fixed complete to wall and ceiling or laid in floor , bore of pipe 15 mm dia incl making hole in RCC slabs for vertical pipes and making good complete all as specified and directed.

S&F in repair vitreous china wash basin, while flat back size 600x480mm white , excluding taps , waste chain and plug and porcelain stopper but including brackets complete all as specified and directed.

S & F in repairs china water closet Orissa Pan 580 X440mm long pan Ist quality ISI marked with cast iron 'P' or 'S' trap including provision of cement concrete bedding including connections to flushing cistern/pipe and making good disturbed portion to match existing surfaces complete all as specified and directed.

S&F in repair chromium plated shower rose 125 mm size complete all as specified and directed.

S&F in repair shower arm 300 mm long round shape with 90 degree bend for wall mounted shower with stainless steel flange complete all as specified and directed.

S & F in repair soap dish, chromium plated approximate size 100X100X60mm chromium plated, fixed to wall with rawl plugs and chromium plated screws complete all as specified and directed.

S&F in repair PVC waste pipe 32/40 mm dia 450mm long complete all as specified and directed.

S&F in repair 20 mm dia brass CP tubular towel rail D type 60 cm long complete all as specified and directed.

S & F in repairs 15 mm dia brass chromium plated stop cock chromium plated concealed type with wall flange complete all as specified and directed.

S&F PVC (SWR) pipe 110mm dia single socket in any length with rubber gasket cup washing ,jointed laying in trenches or floor including dismantling complete all as specified and directed.

S&F in repair PVC (SWR) bends of 110mm dia one end fixed to pipes and another end fixed to pipes with solvant complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) junction single, (Single T) with oval access door equal or unequal fixed to pipe with solvant cement complete all as specified and directed.

S&F PVC (SWR) pipe 75mm dia single socket in any length with rubber gasket cup washing ,jointed fixed to wall including dismantling complete all as specified and directed.

S&F in repairs PVC (SWR) pipe 75mm dia single socket in any length with rubber gasket cup washing ,jointed laying in trenches complete all as specified and directed.

S&F in repair 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair PVC (SWR) bends with oval access door of 75mm bore one end fixed to pipes with solvant complete all as specified and directed.

S&F in repair 75mm bore PVC (SWR) junction single, (Single T) with oval access door equal or unequal fixed to pipe with solvant cement complete all as specified and directed.

S&F in repair 75mm bore PVC (SWR) vent cowl complete all as specified and directed.

S&F in repair 110/75 mm bore PVC (SWR) reducers larger bore to be measured fixed in pipe complete all as specified and directed.

S&F in rapair 10 Ltrs capacity PVC low level flushing cistern with inlet foat valve,handle ,including brackets,PVC bend of approved make complete all as specified and directed.

S&F C.P towel Ring 200mm dia round with round flange complete all as specified and directed. Make in Mark/ Coronet/ Gem as approved by GE.

S&F C.P towel rack 600mm long with bottom hook complete all as specified and directed.

S&F PVC connection 15 mm size with PTMT nut of length 450 mm complete all as specified and directed.

S&F in repair 100mm squar CP greating fixed with coloured cement joint to match the existing surface of tile complete all as specified and directed.

S & F in repair 15 mm dia CP Bib tap fancy type with capstan head fix in 15mm bore GI pipe complete all as specified and directed.

S&F in repair harrision rails, mild steel chromium plated withfixing bracket stop roller etc complete all as specified and directed.

S & F in repair of sinks without drainage board of stainless steel 1mm thick kitchen or labouratory with plugs washer and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe bowl size 410mm x 330mm x160mm complete all as specified and directed.

S & F in repair rotational moulded PVC water storage tank multilayered cylinderical, verticle with closed top hoisted and fixed in position tank capacity 500 Ltr with and including PTMT float valve 20mm dia, tank nipple for inlet and outlet and making connection for inlet and outlet complete all as specified & directed.

S & F in repairs angle stop valve brass CP 15 mm bore fancy type screwed ends for iron pipe incl flange complete all as specified and directed.

S&F in repairs 15 mmdia fancy type brass chromium plated pillar tap with fly nut capstan head screwed for 15 mm bore dia of pipe complete in all respect as specified .

M & L for providing and laying water proofing treatment on top surfaces of roof after cleaning of roof surface with water and filling of cracks with ceiling compound or polymer modified mortar and dried top surface of roof applying a coat of cold bituminous primer @ 0.3 Ltr per Sqm and followed a layer of APP polymer modified five layered water proofing membrane 3 mm thick weight not less than 4.00 Kg /Sqm with non woven polyester reinforcement (weight not less than 160 gm /Sqm) of Dr Fixit Torchshield MF-P3160 or equivelent . The APP membrane shall be laid with LPG connected torch method. A layer of hot blown bitumen grade 85/25 @ 1.20 Kg /Sqm shall be applied on top surface of APP membrane . Application including. over lap side lap shall be provided as per manufacturers instruction and as specified and directed . The side lap and laps should have overlap 75 mm to 100 mm and should be thermo fuse together so that it forms a single sheet throughout complete all as specified & directed. .

M&L for preparation surface by brooming down or steel wire brushing , scraping down smoke shoot,moulds etc from old decorated of ceiling plaster and applying one coat of white wash on ceiling surface including salt, glue and blue etc. as required complete all as specified and directed .

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 MPa and 150AZ as in roof covering/ cladding to wall, fixed with self tapping screws incl dismantling of old AC sheets complete all as specified and directed.

S & F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 MPa and 150AZ as in roof covering/ cladding to wall,ridge etc fixed with self tapping screws incl dismantling of old PGI sheets complete all as specified and directed.

S & F in repair rotational moulded PVC water storage tank multilayered cylinderical, verticle with closed top hoisted and fixed in position tank capacity 1000 Ltr with connection for inlet and outlet complete all as specified & directed.

M&L preperation of old painted steel and iron surfaces of any description not otherwise described over 10cm width of girth and applying one coat of synthetic enamel paint (any tint/shade) complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls including raking out joints hacking for key, scrubing down with water etc complete all as specified and directed.

M&L in repair mild steel work as in frame of tank staging, trusses, purlins, rafter etc made out of MS pipe, flat, angle or hollow square section conforming to IS-1161 – 1979 grade St-240 fix with necessary bolt embeded in RCC complete all as specified & directed.

S& F in repairs steel tubes medium grade in any size or length galvanised with all fittings and fixed complete to wall and ceiling or laid in floor , bore of pipe 20 mm dia incl taking down of old pipe and making hole in RCC slabs for vertical pipes and making good complete all as specified and directed.

M&L for PCC (1:3:6) type C-2 using 20 mm graded crushed stone aggregate as in foundation complete all as specified and directed.

Extra for forming fair finishes drain or channels 30CM inner girth in cement concrete using extra cement including forms, moulds, mitred/Stopped ends etc complete all as specified and directed.

M&L for providing and injecting chemical emulsion for Post construction Anti Termite Treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 liters per linear meter including drilling and plugging holes etc in apron complete all as specified and directed.

S & F 140 mm long Floor door stopper of Aluminium body and tonge of steel spring, fixed in floor

S&F in repair Aluminium powder coated three track sliding windows (with three sliding shutters, (One with and incl stainless steel wire mess and two with and incl 4 mm thick sheet glass panes) aluminium sections not less than 1.1kg per meter for bottom track and top track and side track 0.98 kg per metre, bottom shutter frame 0.55 kg per metre, top shutter frame 0.47 kg per metre, shutter sides, o.47 kg per metre and interlock sides 0.45 kg per metre including suitable nylon beading channel gasket, nylon rollers Maruthi lock with handles etc complete all as specified and directed.

S & F in repair of sinks with drainage board of stainless steel 1mm thick kitchen or labouratory with plugs washer and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm complete all as specified.

M&L for preparation surface by brooming down or steel wire brushing , scraping down smoke shoot,moulds etc from old decorated of wall plaster and applying one coat of white wash on wall surface including salt, glue and blue etc. as required including cleaning of glass panes, floor and plinth protection complete all as specified and directed .

All as per item No. 92 above but one coat of white wash on ceiling complete all as specified .

S&F in repair 100mm cast iron sanitary connection socket to fit WC out-let complete all as specified and directed.

S&F dust/ snake aluminium strip guard in doors of size 40X2mm fixed with at aluminium strip bottom complete all as specified and directed.

S & F in repair 18/19 mm thick prelaminated particle Block boards, exterior grade prelaminated one side with decorative choice lamination & other side balancing white lamination , fixed with screws as in cup board shutters & shelves etc complete all as specified and directed.

S & F of 100 mm long stainless steel handles, cast type, polished bright complete all as specified and directed.

Dismantling and taking down carefully U/S copper / aluminium point wiring (light, fan, socket, power) complete fitting such as switches, ceiling roses, pendants, lamp holder, light fitting etc including CI/Pressed steel terminals, switch box, and making good the disturbed surface of wall/floor etc, to match with the existing surfaces of wall/floor complete all as specified & directed.

Dismantling and taking down carefully sub-main wiring/service wire of any size including wooden batten etc and making good the disturbed surfaces of wall/floor to match with the existing wall/floor etc complete all as specified and directed.

Dismantling and taking down carefully existing DB’s any type and making good the disturbed surfaces of wall/floor to match with the existing wall/floor etc complete all as specified and directed.

Material and labour for point wiring with 1.5 sq mm PVC insulated, unsheathed, stranded copper conductor (FRLS) cable single core 1100 Volt grade in and including rigid PVC conduit medium grade 20mm dia or more ISI Marked concealed conduit and conduit accessories and cutting chases of suitable girth where required on brick/concrete surface & making good disturbed surface,provision of CI/Pressed steel terminal switch box with plastic laminated sheet 3 mm thick fixed with brass screw and washers along with 1.5 sq mm PVC insulated unsheathed stranded copper conductor cable ( FRLS ) as earth wire connected with main common earth dolly complete all as specified and directed for the following :- One light/fan/bell/exhaust fan point controlled by one, one-way Piano type switch 5/6 Amp.

One 3pin/5pin 5 Amps socket out let on same board with other switches complete all specified and directed.

One 3pin/5pin 5 Amps socket out let on independent board with other switches complete all specified and directed .

All as per item No 101 above but with 2.5 Sqmm PVC insulated cable (FRLS ) for 15 Amps power point complete all as specified and directed with other switches and same size ofearth wire.

All as per item No 101 above but with 4 Sqmm PVC insulated cable (FRLS )and same size of earth wire for 15 Amps power point.

Dismantling and taking down carefully exhaust fan and wall fans of any size including wooden batten etc and making good the distrubed surfaces of wall/ floor to match with the existing wall/floor etc complete all as specified and directed.

Supply and fixing switch piano flush type single pole, one-way 5 Amps, 240 Volts AC complete all as specified and directed.

Supply and fixing switch piano flush single pole, one-way 15 Amp, 240 Volts AC complete all as specified and directed.

Supply and fixing socket out let2 in 1,3 pin 5 Amps flush type complete all as specified and directed.

Supply and fixing socket out let 2in1.3pin 5 Amp and 15 Amp flush type (multi) suitable for 240 Volt AC complete all as specified and directed.

Supply and fixing ceiling rose surface bakelite 65x25mm dia having three terminals complete all as specified and directed.

Supply and fix stepped type electronic fan regulator flush type complete all as specified and directed.

S&F bell push 05 Amps 240 volts A.C complete all as specified and directed.

S&F Bell multi Music Type , 240 Volts complete all as specified and directed.

S & F batten/angle holder insulated body with back plate suitable for batten fitting complete all as specified and directed.

S & F LED lamp 9 watt complete all as specified and directed. Make: ipro/Havells/Crompton

S & F LED tubelight 20 watt with integrated driver, polycarbonate diffuser & aluminum housing complete all as specified and directed. Make: Havells Cat Part No LUMILINEPLUSBS20WLED865SPCSS/HPL Cat Part No HLPT51520CW/ C&S Cat Part No LTTB4f20WLEDP/W as approved by GE.

S & F LED mirror light 10 watt 600 mm long with integrated driver, polycarbonate diffuser & aluminum housing complete all as specified and directed. Make: Havells Cat Part No LUMILINEPLUSBS10WLED865SPCSS/ HPL Cat Part No HPLT51510CW /C&S Cat Part No LTTB2F10WLEDP/W as approved by GE.

S & F and fixing modular enclosure for geyser and AC with two pole and earth plug socet complete with one, single pole MCB 32 Amps cap 240 Volts AC complete all as specified and directed.

S & F PVC fresh air fan 240 volts Ac 50 Hz 250 mm sweep PVC body including louvers and cutting as required size and shape complete all as specified and directed. Make: Bajaj/Havells/Crompton

S & F exhaust fan 240 volts Ac 50 Hz 300 mm sweep matellic body including louvers and cutting as required size and shape complete all as specified and directed. Make: Bajaj/Havells/Crompton

S&F Metering Boards fabricated out of 1.6 mm thick CRCA sheet steel with locking arrangement. suitable for housing of electonic meter temper proof single phase 4 nos, including 200 amp Aluminium busbar (4 Nos) and folowing accessories:- (b) Incomming MCB TPN 415 V, 63 Amps - 01 No (c) Outgoing MCB SPN 240 V, 40 Amps - 04No (d) MCB,SPN 240 V 10 Amps - 01 No

Supply and fixing sheet metal enclosure double door type for MCBs DB SPN(Single pole and neutral) 240V AC 8 way with 200 Amps rated busbar complete all as specified and directed.

Supply and fixing MCB 6 to 32 Amp 'C' series 10 KA repturing capacity complete all as specified and directed.

Supply and fixing MCB isolator SPN 40 Amp 240 V AC 10 KA repturing capacity complete all as specified and directed.

Supply and fixing sub main wiring two single core 6 sq mm PVC insulated unsheathed stranded copper conductor cable ( FRLS ) 1100Volts grade drawn in & including rigid PVC conduit 20mm dia or more medium grade concealed in wall along with 4.00 Sq mm PVC insulated unsheathed copper conductor cable (FRLS) as earth wire and wire connected with main earth dolly including cutting chasing and making good disturbed portion complete all as specified and directed.

M&L for earthing complete with galvanished steel earth plate electrode 600x600x6.0 mm thick buried directly in ground and earth pit not less than 2.25 mtr deep below NGL and top edge of the plate not less than 1.5 Mtr deep below NGL, surrounded with adequate qty of char coal dust mixed with salt to a packed thickness not less than 15 Cm on all sides of earth plate incl excavation, earth work, returning filling in , removal of surplus soil to a distance in n.exc. 50 mtr incl GI wire 4mm dia nut bolts etc to earth plate one end connected to continuous earth wire incl GI pipe watering light grade with CI funnel and wire mesh and PCC 1:2:4 type B-1 as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1 duly re-enforced with MS bar 6mm dia @ 150mm C/C both ways with 10mm dia MS bar lifting handles, all as described in electric plate No. 5 of SSR part-I complete all as specified and directed.

S&F in replacement exhaust fan 450 mm sweep Metallic body including louvers and cutting as required size and shape complete all as specified and directed.

Supply and fixing sheet metal enclosure double door type for MCBs DB SPN(Single pole and neutral) 240V AC 12way with 200 Amps rated busbar complete all as specified and directed.

S& F in replacement wall mounted LED batten 20watt with integrated electronic driver, aluminium housing and polycarbonate diffuser complete all as specified and directed. Make: Havells Cat No LUMILINEPLUSBS20WLED865SPCSS/ Crompton Cat No LCTLN-20-CDL/ Equivalent in Philips as approved by GE.

Supply and fix in repair ceiling fan 1400 mm sweep without regulator 230 volts single phase energy saving fan 5 star rated including canopy set down rod, shackle assembly, fan hook including three core copper conductor cable of size 1.5 sqmm 3 core from fan to ceiling rose or connector and writing MES No with black synthetic paint complete all as specified and directed.

Supply and fixing sheet metal enclosure double door type for MCBs DB SPN(Single pole and neutral) 240V AC 4 way with 200 Amps rated busbar complete all as specified and directed.

S & F LED wall security light 45 Watt with bracket and clamps complete all as specified and directed

S&F LED recessed 2X2 glare free with integrated electronic driver, uniform illumination ceiling light 36 Watt, color Temp 5700K including driver & twin core copper wire for making connection from light to ceiling rose complete all as specified and directed. Make Havells cat no. ENDURASLIMPROPLUS2X2PLR36WLED840MOD/ Equivalent in Crompton/C&S as approved by GE.

S&F concealed LED down light fitting 6 watt with integrated electronic driver, surface mounted pressure die cast aluminium luminaire with round profile to fit in ceiling cut out dia 180mm including twin core copper wire for making connection from light to ceiling rose complete all as specified and directed. Make :- Havells cat part no. EDGEPRORDDLR6WLED840S & Equivalent of Crompton/ C&S as approved by GE.

Supply and fix wall mounted cabin fan 400 mm sweep 230 volts single phase PVC body with BEE star rated having suitable arrangements for fixing on wall complete all as specified and directed.

NOTES :- 1. For the items for which specifications not mentioned any where in the tender, the BIS specifications shall be followed. 2. Unless otherwise specified the rates for PCC/RCC shall deemed to include the cost of formwork shuttering etc., required for complete and proper execution of the work. Refer Schedule "A" notes for details.

Nanda Brothers

Bharat Construction Company

M/s Pradeep Kumar