KOTDA RWSS DELAY MONSOON PLANNING UNDER WSS- 6 PROGRAMME

GUJRAT WATER SUPPLY SEWERAGE BOARD

TALUKA:-Kotda Sangani DIST:RAJKOT

Name of Work :- KOTDA RWSS DELAY MONSOON PLANNING UNDER WSS- 6 PROGRAMME

S C H E D U L E -- A

Sr.No. Particulars Approximate Quantity Unit Rate / Unit Place of delivery

1) Contractor shall have to buy and bring ordinary portland cement as per IS 8112-1989 & IS 12269-1987 or its latest revision with ISI mark from open market and produce the bill of purchase along with necessary test certificate at the time of claiming running account bills. The cement shall be tested in the Departmental laboratory at the cost of the contractor whenever instructed by Engineer-in-charge. No extra cost should be claimed by the contractor for the same.

2) All materials except shown in Schedule-A and required for the work shall be provided by the contractor.

3) The contractor shall arrange lifting and carting of materials from departmental store to site of work which includes loading, unloading and proper stacking of materials.

4) The contractor has to provide safe store before taking delivery of materials.

5) The materials not shown in Schedule-A will be issued at issue rate or market rate which is on higher side if the same is available with the departmental and if found in the interest of the work.

6) Any material remaining un-used at the time of completion of work or termination of contract shall be returned to departmental store in perfectly good condition at contractor's cost. When materials are supplied free of cost for use in work and surplus and unaccounted balance thereof are not returned to the department, recovery in respect of such balances will be effected at double the applicable issue rate of the material or the market rate whichever is higher.

SIGNATURE OF CONTRACTOR DEPUTY EXECUTIVE ENGINEER

PHS SUB DIVISION

GUJRAT WATER SUPPLY SEWERAGE BOARD

Tal : Kotda Sangani Dist : Rajkot

Name of Work :- KOTDA RWSS DELAY MONSOON PLANNING UNDER WSS- 6 PROGRAMME

GWSSB SOR - 2022-23

Qty. Unit Item Rate Per Amount

Providing and supplying in standard length ISI mark rigid unplasticised PVC pipes suitable for potable water with solvent cement joints including cost of couplers, as per IS specification no. 4985/1988 including all local and central taxes, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to the departmental stores and including cost of jointing meterial i.e. solvent cement, etc. complete.

(A) PVC pipe of test pressure of 6kg/cm^2

5500.00 RMT 90 mm dia pipe 139.00 RMT 764,500.00

Providing and supplying ISI mark CI D/F Sluice valves , butterfly valves & Reflux valves of following class and diameter including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to departm

A- Sluice valves as per IS - 780/2906 1984

PN-1 With hand wheel /cap operated (PD type short body)

3.00 No. 80 mm dia. Sluice valve PN.1 2652.00 No. 7956.00

Providing and supplying C.I. Air valves of approved make & quality of following class and diameter including alltaxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to departmental stores, stacking etc. complete.

1) Air valves single (S1) Type

Providing PVC specials such as tees, bends, reducers, etc.comp.

Excavation for pipe line trenches incl. all safety provisions using site rails and stacking excavated stuff up to a lead of 90 mts. cleaning the site etc. complete for lifts and strata as specified.

Up to 1.5 mt depth.

1320.00 Cum. (a) In all sort of soils and soft murrum 89.00 Cum. 117,480.00

990.00 Cum. (b) In hard murrum, boulders, incl. Macadam road. 135.00 Cum. 133,650.00

990.00 Cum. (c) In soft rock 163.00 Cum. 161,370.00

Lowring, laying and jointing PVC pipes and specials of following class and diameter including cost of conveyance from stores to site of works including cost of labour, material, except cement solvent, giving satisfactory hydraulic testing as per ISI code.

5500.00 RMT 90 mm PVC Pipe 17.00 RMT 93,500.00

Lowring, laying and jointing in Position following C.I/ D/F Reflux Valves, Butterfly Valves, Sluice Valves, Sluice Valves, and Air Valves Including Cost of all labour, jointing material including nut bolts and giving satisfactory hydraulic testing , ertc. complete.

10.00 Nos. (1) 80 mm dia. Sluice valve PN.1 400.00 Nos. 4,000.00

3.00 Nos. (2) 40 mm Air valves single (S1) Type 69.00 Nos. 207.00

Construction of valves chambers in brick or bela stone masonry, locally available in C. M. 1:6. Foundation concrete 150 mm thick in CC 1:4 8 of trap metal size 25 mm to 40 mm thick, inside cement plaster in C. M. 1:3 and cement pointing outside in C. M. 1.3 and top cover of precast RCC slab 100 mm thick (with key hole in two parts, each with handes or MS Bar etc. complete as given size) Upto 1 Mt. depth from G. L. to pipe invert level incl. complete civil works but excl. cost of excavation and refilling with cast in situ RCC slab in one single piece with fing of CI-MH Frame and cover (excl, cost of C-MH Frame and cover) with 23 mm thick brick masonry wall in C.M.1.6

( Do-in- single Piece )

3.00 Nos. Size 0.60x0.60x1 m deep. 5001.00 Nos. 15003.00

Refilling the pipeline trenches incl. ramming, watering, consolidating desposal of surplus stuff as directed within a radius of 3 km.

3265.00 Cum. refilling 22.00 Cum. 71,830.00

Total Rs. 1,417,181.00

I/We am/are willing to carry out the work at % above/below percentage (should be written in figure & words) above/below the estimated rates mentioned above/below amount of my/our tender worked out as under :-

Estimated Amount put to tender Estimated Amount put to tender.

Rs. Add. % Rs. Deduct %

Above Rs. Below Rs.

Total Rs. Total Rs.

(In words Rupees (In words Rupees

Signature of Contractor Executive Engineer

P.H.Works Division