Loading
Loading…
Loading…
Tender Value
₹10 L
EMD Value
₹20,000
Closing Date
27 Aug 2026, 1:00 pmDue tomorrow
Executive Engineer CMD JKPDC Udhampur
Office of the Executive Engineer CMD JKPDC Domail Udhampur
Repair/ renovation of dilapidated shift duty staff quarters along with JE and AEE quarter at Dibber CHEP-III
2026_SPDC_317177_2
ENIT 13 of 2026-27
Open Tender
Civil Works
Percentage
75 days
Udhampur
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,000
CP and AO JKPDC Jammu
₹20,000
Chief Engineer Office C Iand D wing JKPDC Jammu
27 Aug 2026
25 Jul 2026
29 Aug 2026
25 Jul 2026
27 Aug 2026
30 Jul 2026
30 Jul 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead :With cement mortar 1:4 (1 cement : 4 coarse sand) | - | Sqm | 1 | - |
| 2Providing & laying in position cement concrete of specified grade including curing but excluding the cost of centering & shuttering, all work up to plinth level: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) | |||||
| 3Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | |||||
| 4 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge Second class Kail wood:35mm | 1 | Sqm | 1 | ₹1 |
| 5Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick: Ply wood 5 ply, 9 mm thick Commercial ply on both sides | |||||
| 5.1 | Ply wood 5 ply, 9 mm thick Commercial ply on both sides | - | Sqm | 1 | - |
| 5.2 | 4 mm thick glass pane (weighing not less than 10 kg/sqm) | 1 | Sqm | 1 | ₹1 |
| 6Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : Second class Kail wood: 35mm | |||||
| 7 | Applying priming coat With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) | - | Sqm | 1 | - |
| 8 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work | - | Sqm | 1 | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.49 MB
SBDW2.pdf
Tender Documents • 1.12 MB
BOQ_1038333.xls
BOQ • 0.34 MB
Extension.pdf
PDF • 0.23 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].