Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹8.3 LAdmitted-Fee/PreQual/Technical/Finance | -37.38% | ₹8.3 L | L1 | Admitted-Fee/PreQual/Technical/Finance |
| 2 | L2₹8.5 L+₹18,396.94 (2.20%)Admitted-Fee/PreQual/Technical/Finance | -36.00% | ₹8.5 L+₹18,396.94 (2.20%) | L2 | Admitted-Fee/PreQual/Technical/Finance |
| 3 | L3₹10.1 L+₹1.8 L (21.1%)Admitted-Fee/PreQual/Technical/Finance 0 | -24.16% | ₹10.1 L+₹1.8 L (21.1%) | L3 | Admitted-Fee/PreQual/Technical/Finance |
| 4 | L4₹10.3 L+₹2.0 L (23.8%)Admitted-Fee/PreQual/Technical/Finance | -22.50% | ₹10.3 L+₹2.0 L (23.8%) | L4 | Admitted-Fee/PreQual/Technical/Finance |
| 5 | L4₹10.3 L+₹2.0 L (23.8%)Admitted-Fee/PreQual/Technical/Finance TALESHWAR PRASAD CHAINPUR SONDIHA RAMGARH JHARKHAND PIN 829134 JHARKHAND | RAMGARH | JHARKHAND | 829134 | -22.50% | ₹10.3 L+₹2.0 L (23.8%) | L4 | Admitted-Fee/PreQual/Technical/Finance |
Tender Value
₹15.7 L
EMD Value
₹19,700
Closing Date
17 Aug 2026, 3:00 pmClosed
STAFF OFFICER CIVIL KUJU AREA
CIVIL DEPT. GM OFFICE CCL KUJU AREA KUJU RAMGARH JHARKHAND
AMC for Systematic Maintenance of Railway Track at New Kuju Siding under Topa OCP of Kuju Area.
2026_CCL_363085_1
GM(K)/SO(C)/e-NIT/26-27/251
Open Tender
AMC WORKS
Percentage
730 days
TOPA COLLIERY
Please refer NIT.
3 documents required · 3 mandatory
₹19,700
18 Aug 2026
4 Aug 2026
18 Aug 2026
6 Aug 2026
17 Aug 2026
6 Aug 2026
6 Aug 2026 - 11 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 0 | Item Description/ Heading | - | - | - | - |
| 1 | Day to Day visiting and maintenance of track and compacting the ERC with hammer or appropriate equipment as per standard of Indian Railway viz Ministry instruction at Chapter -II and of Manual (1985) and other standard spplicable. | 291.2 | Km | 934.35 | ₹2,72,082.72 |
| 2 | Supply and fixing single coil spring washer as per RDSO Drg No.T-10773 | 160 | each | 16.93 | ₹2,708.8 |
| 3 | Supply and fixing Fish bolts and nuts(25mmx140) as per RDSO Drg No:T-1899Alt-2 | 160 | each | 131.71 | ₹21,073.6 |
| 4 | Through replacement of Grooved Rubber sole pads(GRSP) on psc sleeper duly removing the ERCs and liners and replacing the GRSP by just lifting the rail refixing the liner and ERC after lubrication of ERCs liners and liner contact area with Grease Graphite Grade O (IS:408) duly cleaning of rust/ scale of ERC , Metal/GFN liners & SGCI insert by using wire brush , scrapper/sand emery paper etc. , with all contractors labours , tools , plant , transportation of GRSP etc complete and as directed by Engineer in charge. | 900 | each sleeper | 89.78 | ₹80,802 |
| 5 | Through packing of track as described in para -224 of indian raiway permanent way manual for PSC sleeper track (BG) FOR sleepers density of 1540 sleepers/ km or more | 720 | Track metre | 101.2 | ₹72,864 |
| 6 | Lubrication of ERCs and its liner contact area by removal of ERCs and metal /GFN liners in rail panel ,cleaning of rust / scale of ERC, Metal/ GFN liners & SGCI insert by using wire brush ,scrapper / sand emery paper etc. supply & provision of anti corrosive treatment by application of graphite grease as prescribed by Railway under side of liners & corresponding area of rail foot & SGCI insert with ERCs and re fixing the same as per para -1411(5) of indian railway permanent way manual. | 920 | each sleeper | 36.01 | ₹33,129.2 |
| 7 | Drilling of hole in rail of any section and UTS manually ( in emergencies only ) with contractor labour, tools ,& plant consumble etc for hole of dia below 250mm | 80 | each hole | 161.01 | ₹12,880.8 |
| 8 | Cutting/cropping of rail of 90R/ 52 kg or lighter section -72 UTS manually and perfectly verical with contractor's labour hacksaw blade and tools & plant. Note: 1 Manual cutting should be used only in emergencies with proof permission of section ADEN where machine cutting can not be arranged in time. 2. Cutting of rail with blade and forcing to party by using other means to break the rails is prohibited. 3 Rails should cut right through hacksaw blade only. | 40 | each cut | 259.89 | ₹10,395.6 |
| 9 | Fixing of fish plate and fish bolts( of fish bolts) on a jint created in rail of 90R . 52 kg or 60 kg of aa UTS duly lubricating fish plate/bolts with contractor grease graphite in running track condition including transportation of fish plate and fish bolts from nearest station /store/level crossing ( rail cutting & drilling to be paid separately) | 50 | each joint | 2,318.43 | ₹1,15,921.5 |
stage.html
html • 0.02 MB
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 2.48 MB
BOQ_376004.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .