Sabarmati-Botad Section - Construction of 10 Type-II Quarters on replacement account 4 Nos at Dholka, 4 Nos at Dhanduka and 2 Nos at sarkhej.

A-DSR 2023 Items

B-NS Items(Electrical)

Item Breakup - A-DSR 2023 Items

nuts complete. ANODISED ALUMINIUM FITTINGS (ALL 9.95S FITTINGS SHALL BE ISI MARKED) Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less 9.97 than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 35 9.97.4 150x10 mm Each 100 82.55 8255 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less 9.100 than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 36 9.100.1 125 mm Each 160 66.25 10600 37 9.100.2 100 mm Each 160 59.55 9528 9.105S GYPSUM BOARD PARTITIONS Providing and fixing magnetic catcher of approved quality in cupboard / ward robe 9.114 shutters, including fixing with necessary screws etc. complete. 38 9.114.1 Triple strip vertical type Each 80 52.5 4200 9.119 Providing and fixing factory made P.V.C. door Metre 60 492.7 29562 frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 39 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer's specification and direction of Engineer- in-Charge. BHAVNAGAR DIVISION-ENGG/WESTERN RLY Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 9.120 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, panelling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing. 9.120.2 30 mm thick pre laminated PVC door Sqm 50 3663.8 183190 40 shutters Providing and fixing 18mm thick both sides Pre-laminated cement bonded wood particle board as per IS : 15786:2008 of approved brand and shade with suitable full threaded 9.166 steel screws etc. in partitions, boxes, shelves, racks and cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction of Engineer-in-charge 41 9.166.1 18 mm thick Sqm 40 1362.3 54492 10.0 STEEL WORK 10.1S General 10.2 Structural steel work riveted, bolted or Kg 5000 133.7 668500 welded in built up sections, trusses and 42 framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 10.28 Providing and fixing stainless steel ( Grade Kg 500 772.4 386200 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash 43 fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). 11.0 FLOORING 11.1S General BHAVNAGAR DIVISION-ENGG/WESTERN RLY Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) 11.3 finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 11.3.1 40 mm thick with 20 mm nominal size stone Sqm 300 614.2 184260 44 aggregate 11.26S KOTA STONE FLOORING Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment 11.26 to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 45 11.26.1 25 mm thick Sqm 100 1948.25 194825 11.27 Kota stone slabs 20 mm thick in risers of Sqm 200 2354.7 470940 steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 46 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. 11.37S CERAMIC GLAZED TILES 11.37A Providing and fixing 1st quality ceramic Sqm 50 1112.7 55635 glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by 47 Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 11.41S VITRIFIED FLOOR TILES Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, 11.41 laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. 48 11.41.2 Size of Tile 600x600 mm Sqm 400 1553.45 621380 12.0 ROOFING 12.1S SHEET ROOFING Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), 12.21 including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : 49 12.21.1 In 75x75 mm deep chase Metre 150 305.15 45772.5 12.37S RAIN WATER SPOUT AND PIPE Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including 12.41 jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 50 12.41.1 75 mm diameter Metre 100 248.8 24880 BHAVNAGAR DIVISION-ENGG/WESTERN RLY Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain 12.42 water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 12.42.4 Single tee without door 51 12.42.4.1 75x75x75 mm Each 10 144.3 1443 52 12.42.4.2 110x110x110 mm Each 10 221.35 2213.5 12.42.5 Bend 87.5 degree 53 12.42.5.2 110 mm bend Each 10 150.35 1503.5 12.42.6 Shoe (Plain) 54 12.42.6.2 110 mm Shoe Each 10 131.85 1318.5 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. 12.43 screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 55 12.43.1 75 mm Each 40 369.85 14794 56 12.43.2 110 mm Each 100 371.3 37130 13.0 FINISHING 13.1S CEMENT PLASTER (IN FINE SAND) 13.1 12 mm cement plaster of mix : 57 13.1.1 1:4 (1 cement: 4 fine sand) Sqm 900 347.05 312345 58 13.1.2 1:6 (1 cement: 6 fine sand) Sqm 1500 333.35 500025 13.11S CEMENT PLASTER IN TWO COATS 13.12 18 mm cement plaster in two coats under Sqm 1300 537.45 698685 layer 12 mm thick cement plaster 1:5 (1 59 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) finished rough with sponge. 13.20S PEBBLE DASH PLASTER 13.26 Providing and applying plaster of paris putty Sqm 2200 262.7 577940 of 2 mm thickness over plastered surface to 60 prepare the surface even and smooth complete. 13.37S INTERIOR FINISHING Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved 13.41 manufacturer and of required shade and colour all complete to achieve even shade and colour : 13.41.1 New work (two or more coats) over and Sqm 1500 185.65 278475 including water thinnable priming coat with 61 cement primer having VOC content less than 50 gram/litre 13.44S EXTERIOR FINISHING Finishing with Deluxe Multi surface paint 13.48 system for interiors and exteriors using Primer as per manufacturers specifications : 13.48.1 Two or more coats applied on walls @ 1.25 Sqm 2200 193.7 426140 62 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm 13.50 Applying priming coat: 13.50.2 With ready mixed aluminium primer of Sqm 100 74.65 7465 63 approved brand and manufacture on resinous wood and plywood BHAVNAGAR DIVISION-ENGG/WESTERN RLY Painting with synthetic enamel paint of 13.61 approved brand and manufacture to give an even shade : 64 13.61.1 Two or more coats on new work Sqm 450 155.9 70155 14.0 REPAIRS TO BUILDING 14.26S WOOD WORK 14.38 Providing and fixing bright finished brass Each 20 191.45 3829 65 quadrant stay 300 mm long with necessary brass screws etc. complete. 16.0 ROAD WORK 16.1S ROADS 16.3 Supplying and stacking at site. 66 16.3.1 90 mm to 45 mm size stone aggregate cum 150 2098.4 314760 67 16.3.3 53 mm to 22.4 mm size stone aggregate cum 300 1842.3 552690 68 16.3.10 Moorum cum 400 768.25 307300 16.4 Laying, spreading and compacting stone cum 850 1046.95 889907.5 aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road/vibratory roller 8-10 tonne capacity in stages to proper 69 grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density . 16.42S CONCRETE PAVEMENTS Providing and laying design mix cement concrete of M-30 grade, in roads/taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved and specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, 16.43 finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction and longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer-in-charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately). 16.43.1 Cement concrete prepared with batch mixing cum 100 10529.35 1052935 70 machine 17.0 SANITARY INSTALLATIONS 17.1S General Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush 17.1 pipe, with manually controlled device (handle lever) conforming to IS : 7231,with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 17.1.1 White Vitreous china Orissa pattern W.C. pan Each 10 6767.4 67674 71 of size 580x440 mm with integral type foot rests BHAVNAGAR DIVISION-ENGG/WESTERN RLY Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush 17.2 pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : 17.2.1 W.C. pan with ISI marked white solid plastic Each 10 6515.55 65155.5 72 seat and lid Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, 17.7 including painting of fittings and brackets, cutting and making good the walls wherever require: 17.7.4 White Vitreous China Flat back wash basin Each 20 1879.2 37584 73 size 550x 400 mm with single 15 mm C.P. brass pillar tap Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, 17.10 including painting of fittings and brackets, cutting and making good the walls wherever required : 17.10.2 Kitchen sink without drain board 74 17.10.2.2 610x460 mm bowl depth 200 mm Each 10 3873.8 38738 Providing and fixing P.V.C. waste pipe for 17.28 sink or wash basin including P.V.C. waste fittings complete. 17.28.2 Flexible pipe 75 17.28.2.2 40 mm dia Each 20 119.55 2391 17.31 Providing and fixing 600x450 mm bevelled Each 10 1607.95 16079.5 edge mirror of superior glass (of approved 76 quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 17.34 Providing and fixing toilet paper holder : 77 17.34.1 C.P. brass Each 20 803.7 16074 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP 17.73 brass screws with concealed fittings arrangement of approved quality and colour. 17.73.2 600 mm long towel rail with total length of Each 10 708.95 7089.5

of 88 mm, weighing not less than 190 gms. 17.81 Providing and fixing floor mounted, white Each 10 18212.9 182129 vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china 79 cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. 18.0 WATER SUPPLY 18.7S C.P.V.C. PIPES BHAVNAGAR DIVISION-ENGG/WESTERN RLY Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of 18.8 pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 80 18.8.1 15 mm nominal dia Pipes Metre 100 497.8 49780 81 18.8.3 25 mm nominal dia Pipes Metre 150 627.25 94087.5 Making connection of G.I. distribution branch with G.I. main of following sizes by providing 18.13 and fixing tee, including cutting and threading the pipe etc. complete : 82 18.13.1 25 to 40 mm nominal bore Each 10 911.9 9119 18.15S BRASS FITTINGS Providing and fixing gun metal gate valve 18.17 with C.I. wheel of approved quality (screwed end) : 83 18.17.4 50 mm nominal bore Each 10 1026.65 10266.5 Providing and fixing ball valve (brass) of 18.18 approved quality, High or low pressure, with plastic floats complete : 84 18.18.1 15 mm nominal bore Each 10 406.85 4068.5 85 18.18.2 20 mm nominal bore Each 10 462.5 4625 86 18.18.3 25 mm nominal bore Each 10 464.05 4640.5 Providing and fixing C.P. brass shower rose 18.22 with 15 or 20 mm inlet 87 18.22.2 150 mm diameter Each 20 222.35 4447 C.I. SLUICE VALVES/ FIRE HYDRANTS & 18.31S FIXTURES Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber 18.31 insertions etc. (the tail pieces if required will be paid separately) : 18.31.1 100 mm diameter 88 18.31.1.1 Class I Each 20 4791.2 95824 18.48 Providing and placing on terrace (at all floor Per Litre 10000 11 110000 levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable 89 locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 18.49S C.P. BRASS FITTINGS Providing and fixing C.P. brass bib cock of 18.49 approved quality conforming to IS:8931 : 90 18.49.1 15 mm nominal bore Each 60 506.8 30408 Providing and fixing C.P. brass stop cock 18.52 (concealed) of standard design and of approved make conforming to IS:8931. 91 18.52.1 15 mm nominal bore Each 20 670.45 13409 18.54S PTMT FITTINGS Providing and fixing PTMT bib cock of 18.54 approved quality and colour. 18.54.3 15 mm nominal bore, 165 mm long, Each 30 176.85 5305.5 92 weighing not less than 110 gms Providing and fixing PTMT grating of 18.58 approved quality and colour. BHAVNAGAR DIVISION-ENGG/WESTERN RLY 18.58.2 Rectangular type with openable circular lid 18.58.2.1 150 mm nominal size square 100 mm Each 20 196.95 3939 93 diameter of the inner hinged round grating 18.59S AIR VALVE & WATER METER (BULK TYPE) Providing and fixing PTMT Ball cock of approved quality, colour and make complete 18.62 with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 18.62.5 50 mm nominal bore, 242mm long, weighing Each 10 1375.95 13759.5 94 not less than 1240 gms 18.65 Providing and fixing PTMT soap Dish Holder Each 10 111.45 1114.5 having length of 138mm, breadth 102mm, 95 height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. 19.0 DRAINAGE 19.1S STONE WARE PIPES AND FITTINGS Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture 19.1 of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 96 19.1.1 100 mm diameter Metre 200 443.6 88720 97 19.1.2 150 mm diameter Metre 50 695.8 34790 21.0 ALUMINIUM WORK 21.1S General Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM 21.1 rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : 21.1.1 For fixed portion 21.1.1.1 Anodised aluminium (anodised transparent Kg 200 495.05 99010 or dyed to required shade according to IS: 98 1868, Minimum anodic coating of grade AC 15) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings 21.1.2 wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 21.1.2.1 Anodised aluminium (anodised transparent Kg 200 598.6 119720 or dyed to required shade according to IS: 99 1868, Minimum anodic coating of grade AC 15) BHAVNAGAR DIVISION-ENGG/WESTERN RLY Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene 21.3 gasket etc. complete as per the architectural drawings and the directions of engineer-in- charge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.1 With float glass panes of 4.0 mm thickness Sqm 130 1176.8 152984 100 (weight not less than 10kg/sqm) 22.0 WATER PROOFING 22.1S General Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in- charge to required slope and treating 22.7 similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in- charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. "All above operations to be done in order and as directed and specified by the Engineer-in- Charge : 22.7.1 With average thickness of 120 mm and Sqm 200 1684.6 336920 101 minimum thickness at khurra as 65 mm. 26.0 NEW TECHNOLOGIES AND MATERIALS 26.41S NEW TECHNOLOGY ITEMS Providing and laying factory made Precast concrete solid blocks of 200 mm thickness of 26.68 grade M10 made of C&D waste from approved manufacturer in foundation and plinth in: 26.68.1 Cement mortar 1:6 (1 cement : 6 coarse cum 100 7387.25 738725 102 sand) BHAVNAGAR DIVISION-ENGG/WESTERN RLY Providing and laying factory made Precast concrete solid blocks of 200 mm thickness of 26.69 grade M10 made of C&D waste from approved manufacturer in superstructure above plinth level up to floor V level 26.69.1 Cement mortar 1:6 (1 cement : 6 coarse cum 150 9844.65 1476697.5 103 sand) Total 31826703.63

Item Breakup - B-NS Items(Electrical)

NS/1 SETC of Concealed wiring of light / fan/ Numbers 200.00 exhaust fan/Call bell point.

NS/2 SETC of Concealed wiring of sub-main Metre with 4mm² copper wire in PVC conduit.

NS/3 Providing plug point 6 amp on existing Numbers board.

NS/4 Providing board with two switches and Numbers two sockets of 6 amp.

NS/5 Supply of BLDC fan 1200 mm sweep Numbers with regulator all accessories as per specification

NS/6 SETC of MCB Single Phase RCBO of 32 A Numbers capacity , 30 mA sensitive with with metal enclosure as per specification

NS/7 SETC of plug point 20 Amp with 20 A DP Numbers MCB in matel enclosure as per specification

NS/8 SETC of PVC Switch board of suitable Numbers 130.00 size having 16/6 A 5 pin plug socket with 16 A switch as per Specification.

NS/9 SETC of Musical electronic bell

NS/10 SETC of TV point as per Specification

NS/11 SETC of 25 ltr capacity instant type Numbers geyser as per technical specification.

NS/12 SETC of 18/20w LED Tubelight as per Numbers specification

NS/13 SETC of LED light fittings 9-10W as per Numbers specification.

NS/14 SETC of Exhaust fan 250 mm sweep, Numbers colour white/blue blades with white dome & white body. It should be suitable to work on - 250 V AC 50 C/S complete w i t h all accessories as per specification.

NS/15 SETC of MCB DB with incoming 32 Numbers amp DP MCb & outgoing 4x16 amp DP MCB as per specification.

NS/16 SETC of 5 mtr long galvenised Numbers octagonal pole with 130 mm bottom & 70 mm top made up of 3 mm thick steel along with base plate size of 200x200x12mm with foundation.

NS/17 Supply of 4 core 16 mmsq armoured Metre XLPE aluminium cable IS-7098.

NS/18 450x1000mm size in RCC/PCC/hard soil & riffiling as per specification

NS/19 SETC of LED street light 35-45 W Numbers fitting complete with all accessories etc.as per specification.

NS/20 Supply of material and providing pipe Numbers earthing as per IS 3043 - 1987 as amended latest and as per specification Total 1801870.00 BHAVNAGAR DIVISION-ENGG/WESTERN RLY