SPECIAL REPAIRS TO MNS OFFICERS SINGLE LIVING ACCN (BLDG No P-158 AND P-159) WITH ALLIED WORKS AT INHS SANJIVANI, NAVAL BASE KOCHI

Amount

Taking down door chowkats (wooden/steel/PVC) with shutter exc 1.5 Sqm but n.exc 4 Sqm each (without taking off shutters from the frame) complete all as specified and as directed.

Taking down shutters with frame n exc 1.5 Sqm (without taking off shutters from the frame) complete all as specified and as directed.

S&F 2nd class hard wood solid striaght chowkhats & door frames, rebated on the solid, rounded or chamferred put together with glue pinned at joints complete all as specified and as directed.

S&F 2nd class hard wood, 35mm thick factory made door shutters plain framed, panelled shutter with lock rail and panel of 12mm thick veneered water proof particle board the size of rails and stile as per IS -1003 klin seasoned and chemically pressure traeted complete all as specified and as directed.

S&F Second class HW 35 thick Glazed skelton shutters open rebated and prepared to recive gauze etc9 withoutsash bars) edges of framing ,plain chamfered or rounded fitted with cut and mitread beads for securing glass ectc size of members of shutters as specified in SSR Part I section 8 cl 24 (a) complete all as specified and as directed.

S&F Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed.

S & F solid PVC door frame of size 50mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube fixed in openings complete all as specified and as directed.

S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement or stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and as directed.

S&Fstainless steel as in curtain rods, 25mm dia incl decorative brackets and fixing in repairs as specified and directed .

S&F powder coated aluminium I brackets, fancy type for curtain rods and fixing as specified and directed.

M & L 2nd class HW plain fillets square or rectangular in section clean sawn, secured with nails, but bullnosed, splayed, chamfered or rounded on one edge or face area exc. 13 and n.exc 25 Sqcm complete all as specified and as directed..

M&L for 18mm thick rubwood as in CB shutter etc cut to shape as specified and fixed with screws complete all as specified and as directed (Make:- Rubwood)

M&L for 12mm thick rubwood as in CB's shelves, cut to shape as specified and fixed with screws complete all as specified and as directed Make:- Rubwood

S & F soft closing hinges complete all as specified and as directed.

S&F Magnetic catch for cupboard shutter complete all as specified and as directed

S&F 100mm long SS handles for cupboards fixed with stainless steel screws complete all as specified and as directed.

M&L for French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats to obtain a very high glass surface finish with deep colour and chatoyancy complete all as specified and as directed.

S&F mild steel work in hold fasts etc and similar small articles confirming to Fe-290 Gde E 165 fixed in plain cement concrete 1:2:4 type B1 using (20mm graded crushed stone aggregate) including treating with tar or coal tar black paint complete all as specified and as directed

S & F Butt hinges Stainless Steel 100mm complete all as specified and as directed.

M&L for 150mm size aluminium handle (ISI Marked) cast type anodized, fixed complete all as specified and directed.

M&L for 150mm size aluminium tower bolt (ISI Marked) anodized, fixed complete all as specified and directed.

S&F Floor door stopper of Aluminium alloy body and tongue , anodised with hard drawn steel spring, fixed in steel (overall length of cover plate 140mm) complete all as specified and as directed.

S&F 300mm long Aluminium alloy, anodised, sliding door bolt (ISI Marked) with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed.

S&F 250mm long Aluminium alloy, anodised, sliding door bolt (ISI Marked) with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed.

S&F MS 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

Supply and fixing factory made UPVC any colour (as approved by user) casement window double panel one opening outside where glass is fixed and another opening inside where wire mesh fixed with provision for grill (measured seperately) fixing in middle with S.S. friction hinges (300x19x1.9mm), made of (small series) frame n less than 67X64mm & sash n less than 67X114mm both having wall thickness of 2.3+-0.2mm and single glass pane glazing bead of appropriate dimesion (area of window upto 2.5 Sqm) comprising of uPVC multi chambered frame ,sash and mullion (where ever required) extruded profiles duly reinforced with 1.6+- 0.2mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), UPVC extruded glazing beads of appropriate dimension,EPDM gasket,stainless steel (SS 304 grade) friction hinges,zinc alloy (white powder coated) casement handles ,G.I fasteners 100X8mm size for fixing frame to finished wall ,plastic packers,plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners,mullion (If required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc.After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and as directed by Engg in charge. ( Glass shall be paid seperately)

S & F sheet glasses,plain 4.00mm thick glazing all with glazing clip & rubber gaskets etc exc 0.5 sqm in each pane complete all as specified and directed.

S & F sheet glasses pin head type, 4.0mm thick glazing all with aluminum beading, glazing pin etc n exc 0.5 sqm in each pane complete all as specified and directed.

S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin- charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing servicable tiles to store and rubbish off the permises complete all as specified and as directed.

M&L for Glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including rendering 10 mm thick on fair face of brick work or concree surface in CM 1:4 s finished to receive tiles complete all as specified and directed.

M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over cement sreed 10 mm thick in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

S&F vitrified Ceramic tiles light shade, 9 to 10 mm thick (square/ rectangular) polished area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm, , in floors and dados etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick screed bed or bedding layer of mortar in CM 1:4 all as specified and directed .

All as per item No. 34 above but as in skirting over cement backing coat 10mm thick in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Demolition of cement concrete unreinforced in any Position not otherwise specifically provided complete all as specified and as directed.

M&L 75mm thick PCC Type C2 1:3:6 (40mm graded agg) as in plith protection finished even and smooth without using extra cement complete all as specified and as directed.

M&L prepolished mirror finished kota stone slab flooring 20-25mm thick bullnosed over cement screed 15mm thick CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing complete all as specified and directed.

M&L prepolished mirror finished Kota stone slab 20-25mm thick ( in single piece) in riser of steps, skirting, dado and pillar laid over backing coat 10mm thick CM 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing complete all as specified and directed.

M & L for 20mm thick granite stone slab( Jet black )over cement screed 15mm thick in CM 1:4 over RCC Slab complete all as specified and directed .

S & F Vitreous china wash down water closet pan(EWC), any color, pedestal pattern fixed in repairs including fixing of P or S trap ,with Plastic seat cover of any color closed pattern with flat bottom & cover and mild steel chromium plated or aluminium hinges, etc including fixing bolts and PVC valveless, syphonic action type, flushing cistern, low level, 10 ltr capacity any color, with inlet ball valve, float and handle including brackets and all connections, ISI marked complete all as specified and as directed.

Supply and fixing PVC connection pipe 16mm dia (outer 450mm long cold water and taking down old one complete with brass union on both sides to suit 15mm GI pipe and taking down old one, complete all as specified and directed .

S&F in repairs white glazed vitreous china WHB flat back size 550x400 mm including CI bracket etc incl PVC waste pipe 40mm bore 90cm long with coupling spring type complete all as specified and as directed.

S&F in repairs 125 mm dia stainless steel grating as in repair complete all as specified and as directed.

S&F of Brass Chromium plated waste coupling 32 mm dia as in repairs complete all as specified and as directed.

M&L PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement as in repairs complete all as specified and as directed.

S&F 32 mm dia size PVC waste pipe with cup head for Wash Hand Basin as in repair complete all as specified and as directed.

S&F in repairs stainless steel sink with draining board made out of 1.0mm thick shet for kitchen with plug , washers waste pipe , cast iron cantilever brackets connecting union over all size 915X460mm with bowl size 410X330X160mm all as specified .

Supply and fix only Pillar tap fixing with WHB under item No. 43 above 15mm bore fancy type, cast copper alloy with capstan heads chromium plated screwed down fixed complete all as specified and as directed.

S&F CP tubular towal rail 20mm dia , 600mm long all as specified as in repair.(Brass chromium plated) complete all as specified and as directed..

S&F in repairs CP health faucet including flexible pipe and fittings all as directed

Taking down tar felt (water proofing treatement) on roof slab incl cleaning and removing tar felt material and disposing to a distance of exc 250m not exc 500 m complete all as specified

M/L screed bed or bedding layer of mortar 15mm in CM 1:4 (using WPC) for laying roof treatment etc complete all as specified and directed. .

Providing and applying pitch free polyethene water proof coating using Fosroc Nitoproof 600 or equivalent, over dry surface at 1.5mm thick in 2 coats with interval period of 6 hours over a substrate at coverage rate of 2Kg/Sqm using spray/squeege/ roller/ brush. Water proofing coating shall have the elongation of 200% (ASTM D412-90, Tear resistance of >7N (ASTM D 624-00), and tensile strength of 1.5N/mm2 (ASTM D412-90) and it should have a solid content of 80-85% laying 200gsm non woven geotextile membrane over Nitoproof 600 coating with overlap sealed before providing screed concrete Note: (i) The rate includes the application of the chemical with specialized agency or the manufacturer (ii) The Contractor shall give 10 years guarranty for water proofing treatment

S&F in repair PVC Rain water pipe 150 mm dia single socketed in any lenth with rubber ring joints fixed to with suitable brackets complete all as specified and as directed.

S&F PVC bend 150 mm dia complete all as specified and as directed.

Demolition of brick/PCC Block masonary work built in cement mortar complete all as specified and as directed..

M&L precast cement cocrete block masonary (Type C1 1:3:6 )with solid blocks exce 10 cm width and setting in motar 1 :6 complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L cement Plaser in two coats 8mm thick in CM 1:4 using WPC over 12mm thick in CM (1:6) on external surfaces is to be finished even smooth with out using extra cement with using Approved WPC complete all as specified and as directed. (Note : WPC shall be meassured and paid under relevant item .)

M&L for rendering 10 mm thick internal cement plaster in CM 1:6 on fair faces of brickwork or concrete surfaces is to be finished even and fair with out using extra cement complete all as specified and as directed.

M&L for rendering 5mm thick cement plaster in CM 1:3 on fair faces of brickwork or concrete ceiling surfaces on ceiling is to be finished even smooth with out using extra cement complete all as specified and as directed.

M & L for preparation & complete removal of existing treatment on internal surfaces of walls, and applying 1.5 mm thick wall care putty on old plaster surfaces, preparatory to distempering & applying two coats of distemper oil emulsion all as specified and directed .

M & L for preparation new plaster surface of wall and applying 1.5 mm thick wall care putty on new wall surfaces, preparatory to distempering & applying two coats of distemper oil emulsion white or tinted over a coat of alkali resistant primer all as specified and directed .

M & L for complete removal of existing treatment & preparation of old surfaces and applying three coat of white wash on ceiling all as specied and directed .

M&L preparation of new plastered surface of wall and applying three coats of whitewash all as specified and directed.

M&L for complete removal of existing suracfe finishes of external wall ( with mechanical means like grinding and washing with water jet) preparation of surface and apply one coat of alkali resistant exterior primer @ 0.9litre/10 Sqm to anti fungal paint over 1.5mm thick exterior grade wall care putty and allowed to dry over night before applying first coat of weather proof (premium acrylic emulsion paint alkali & fungal resistance,dirt resistance exterior paint) ) complete all as specified and as directed. Note :- Before application of primer coat, the moisture of the wall surface shall be checked with a moisture meter .

M&L for preparation new plastered external wall surfaces and apply base coat to antifungal paint and allowed to dry overnight before applying first coat of wethaer proof (anti fungal paint) complete all as specified and as directed. Note :- Before application of primer coat, the moisture of the wall surface shall be checked with a moisture meter .

M&L for application of first coat of weather proof paint (premium acrylic emulsion paint alkali & fungal resistance, dirt resistance exterior paint of required shade ) ( Asian paint apex ultima protek or equivalent of Berger /Nerolac ) on primed wall surface using spray application or mechanical means, to get a smooth and tint free surface and allowed to dry for at least 8 hrs/ overnight to receive second coat of acrylic exterior emulsion paint complete all as specified and as directed.

M&L for application of second coat of weather proof paint (premium acrylic emulsion paint alkali & fungal resistance, dirt resistance exterior paint of required shade ) ( Asian paint apex ultima protek or equivalent of Berger /Nerolac ) over first coat on wall surface using spray application or mechanical means, to get a smooth and tint free surface complete all as specified and as directed. Note for item No. 68 to 71: (i) The old surface shall prepared using mechanical ways I.e., jet-spray, grinding etc., in such a manner that there should not be any impression of dent, all cracks to be filled with crack filler, water proofing primer in shaft/dampness areas and it should be made even all as per manufacturers instruction before application of putty base primer/base coat and emulsion paint. (ii). The work shall be got executed through authorised applicator of approved manufacturer. Authorisation letter of applicator shall be produced by the contractor before starting the work (iii) The contractor shall submit performance Guarantee certificate provided by manufacturer for a period of FIVE years from the certified date of completion of entire work. (iv) After preparation of surface exterior putty to be applied to make surface even to receive base coat and two coat of emulsion paint, the same shall be got approved by GE before each stage.

M&L Preparation of old painted wooden surface of any description over 10cm in girth/width and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L Preparation of new wooden surface of any description over 10cm in girth/width and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L preparing old treated steel surfaces of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Dismantling Single layer Mangalore pattern or similar tiles in roofing complete all as specified and as directed.

Dismantling Battens for tiles, shingles etc, of any size including tilting fillets spaced n.exc 15 cm complete all as specified and as directed.

All as per item No. 76 above but for in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section,unframed work complete all as specified and as directed.

M/L Roof tiles, Mangalore pattern, interlocking at side joints, laid dry complete all as specified and as directed.

M/LRidge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in lime mortar 1:3 or cement mortar 1:6 complete all as specified and as directed.

M/L 2nd class HW Plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or bradsEXC 13 SQCM& N.EXC 25 SQCM complete all as specified and as directed.

M/L2nd class HW Clean sawn battens at 15 cm centres,exc 15 &n.exc 25 sqcm in sectional area for laying roof tiles complete all as specified and as directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and as directed.

M/L2nd class HW boarding Planed one side, with butt joints and fixed with nails supplied and fixed,25mm thick complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting, any guage, thickness incl Nainital or similar pattern roof covering complete all as specified and as directed.

S & F 0.63 mm thick galvanised corrugated mild steel sheeting with two corrugation side lap, fixed with L-hook or cranked bolts and sheets shall be with 275 gsm zinc coating complete all as specified and as directed.

M/L preparation of new woodenSurfaces of any description, not otherwise described, over 10cm width or girth and applying 2 coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M/L Prepairing the surfaces of battens, any size and spacing, prepared and treated all over (measured overall on one side only, spaces not deducted) with 2 coats of creosote oil complete all as specified and as directed.

M/L Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with 2 coats of creosote oil complete all as specified and as directed.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above GL) complete all as specified and as directed. Note: Rate shall be deemed to be inclusive of removal of material outside MD land.

M&L PCC1:3:6, type C2, 75mm thick in plinth protection, surface to be finished even and fair complete all as specified and as directed.

Demolition of 100mm AC or reinforeced concrete drain pipes, jointed in cement mortar and taking out of wall complete all as specified and as directed.

S&F PVC (SWR) pipes 110 mm dia single socketed in any length , with rubber rings joints fixed to wall complete all as specified and as directed.

S&F PVC (SWR) pipes 75 mm dia single socketed in any length , with rubber rings joints fixed to walls complete all as specified and as directed.

S&F PVC (SWR) bends 110 mm dia with access door complete all as specified and as directed.

S&F PVC (SWR) bends 75 mm dia with access door complete all as specified and as directed.

M&L for 100mm hardcore of gauge n exc. 63mm broken stone or boulders, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as specified and directed.

M&L for 75mm PCC 1:4:8 Type D-2 using 40 mm graded stone aggregate as in Sub base flooring complete all as specified and as directed.

M&L for Coarse aggregate for granolithic floors graded from 12.5mm to 4.75mm under floors or in foundations spreading and levelling in layers n exc. 25 cm thick incl well ramming including watering as required complete all as specified and directed.

M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to SI 15658-2006 of 60mm thickness, with grey cement and pigment complete all as specified and as directed.

M&L PCC 1:2:4 type B1 with 20mm graded aggregate as in coping complete all as specified and as directed.

Supply only Water Proofing Compound complete all as specified and as directed.

S&F in repair Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed.

Material and labour for point wiring for one light/fan point with 1.5 sqmm PVC insulated (FRLSH) unsheathed copper conductor multistranded 1100 volts grade controlled by one way switch including 1.5 sqmm PVC (FRLSH) insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity conductor including connected to common earth dolly drawn through and including rigid PVC conduit medium grade ISI marked concealed of suitable size with all accessories and sunken box of 1.6 mm thick and 60 mm depth pressed steel box factory made for mounting of switch, socket and fan regulator with modular frames covers including chase cutting and making good to the disturbed surface and matching to the existing finishes specifications complete all as specified and as directed .

All as per item No. 104 here in before but for one bell point controlled by one 5 Amp bell push on independent board complete all as specified and directed.

All as per item No. 104 here in before but for one 5 pin 5 Amp socket outlet point on independent board complete all as specified and directed.

All as per item No. 104 here in before but for one 5 pin 5 Amp socket outlet point on same board complete all as specified and directed.

All as per item No. 104 here in before but using with 2.5 sqmm copper conductor cables multistranded (FRLSH) PVC insulated, unsheathed cable and including 2.5 Sqmm copper conductor cable multistranded (FRLSH) PVC insulated and unsheathed cable as earth continuity wire and connecting to common earth dolly for one 6 pin 15 AMp socket outlet point on independent board complete all as specified and directed.

Taking down old u/s sub main wiring of any type complete all as specified and as directed.

Material and labour for submain wiring with 2 runs 4 Sq mm single core,PVC insulated, unsheathed, multistranded copper conductor FRLSH cable 1100 volts grade drawn through PVC concealed conduit not less then 25 mm with all accessories , one run of 4 Sqmm cable single core PVC insulated, unsheathed, ,1100 Volts grade multistranded copper conductor FRLSH cable as earth continuity conductor and connecting including cutting the chases etc and making good the disturbed surface to match with the existing complete all as specified and directed. Note:-Three runs of 4 Sqmm size PVC copper cable, and one run of PVC conduit shall be measured as one unit length.

Supply and fix ceiling rose surface bakelite 65 x 50 mm 3 terminals 240 volt 50 Hz complete all as specified and directed.

S&F in switch modular type single pole, 6 Amps, one way all as per specified & directed.

S&F in modular type sockets 6 Amp-2/3 pin combined 2 module complete all as specified and directed.

S&F in modular sockets 6 Amp/16 Amps, 2/3 pin combined 2 module complete all as specified and directed.

S&F in switch modular type 1 module, 16 Amps, one way all as per specified and directed.

S&F in electric bell, AC 230 V, single pole complete all as specified and as directed.

S&F in bell push modular 6 Amps, 1 module, all as specified and directed.

S&F modular fan step regulator 120 W, 2 module complete all as specified and as directed.

Supply and fixing in LED lights fitting 1x 20 W, system efficacy >120 lumen/watt ,220V, AC decorative box type with driver, holder including LED tube light having efficiency 120lumen/watt connecting up with three core flexible copper conductor cable of suitable size from ceilingrose complete all as specified and as directed.

Taking down fan,existing ceiling fan of any make /size/type , sealing cable end,dismantling blades and removing fan and blades and deposit to MES store yard

Supply and fixing ceiling fan complete with 300 mm/450 mm down rods and accessories 230 V,1200 mm sweep.min air delevery 210 CFM with service value 6.00 BEE 5 star rated BLDC mortor,White colour,regulator operated(without remote) complete all as specified and as directed.. Make: Havells/Crompton/Usha/V guard or equivalent make in the approved manufactures list

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers including cutting the suitable hole for fixing exhaust fan to match with existing surface complete all as specified and directed .

Taking down old unserviceable exhaust fan any type and any make ,deposit to MES yard all as specefied and directed .

Supply and fix on wall/concealed on wall high pressure CPVC pipes SDR-13.5 & plain CPVC SDR 11 fittings including all necessay fittings, solvents of size 25 mm dia including taking down old one complete all as specified and directed.

All as per item No 124 here -in-before but of size 20 mm dia complete all as specified and directed.

Supply and fixing 15 mm angle valve, half turn with flange, with flange type chromium plated for fixing accessories for for CPVC pipe and taking down old one, complete specified and as directed . (Make : Model No: F2004201 of Cera or equivalent make in list of makes)

Supply and fix electric water heater,storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate,NRV, connection piece etc. Make : Racold cat part No. eterno Pro with warranty 2 years on product 3 years on heating element and 7 years on tank or equivalent make in the approved manufactures list.

Dismantling and removing the existing Geysers of any type, any make, depositing to MES store yard all as directed

S&F of bib tap CP quarter turn with flange and aerator,fancy type short body cast copper alloy with crutch or butterfly handle screwed for GI/CPVC pipe of size 15mm and taking down old complete all as specified and as directed by Engg in Charge. Make : Cera model No. F2004151 or equivalent make of any other manufactures in approved list

Supply and fixing of swivel overhead shower (minimum weight 40 grams) of PTMT any colour with shower arm (minimum weight 40 grams) ,15mm size,195mm long with bend of 45 degree with flange for fixing with CPVC pipe and taking down old one complete all as specified and directed as per Engg in Charge. Make: cat part No.F7020101 of CERA or equivalent make of any other manufactures in the approved list.

S&F wall mixer (3 in 1) with arrangement for both cold water,hot water and for over head shower, with bend pipe complete all as specified. Make: CERA model No. F2004404 or equivalent make of any other manufactures in the approved list.

S&F of kitchen sink cock quarter turn wall mounted with swivel spout not less than 150mm and wall flange complete including taking down old one complete all as specified and as directed. Make: CERA model No. F2004251 or equivalent make of any other manufactures in the approved list.

S&F in repairs PVC rain water gutter pipe 150mm dia single socketed in any length with rubber joints fixed to with suitable brackets complete all as specified and as directed.

WELTRONENGINEERINGSERVICES

M/s Antony Kallarakkal

Albert Rebello and Company

M.J.JOY AND COMPANY