Office Room Furnishing Work at Ernakulam

Amount

Modular Table for Employment Officer Provide executive table for employment officer in the existing cabin. a)Main Table Table made of 18 mm prelaminated particle board , Knock down fitting, Modesty panel, level adjustor, Visible edges are lipped with 2 mm PVC edge band and other edge with .5 mm edge band etc. Size:- 180 (L)x 90(W) x 75 (H) cms/ b)Side Table Side table made of 18 mm prelaminated particle board , Edges are lipped with 2 mm PVC edge band, level adjustors, Hinge door, Lock, Handle etc Size:- 120 (L)x 45 (W) x 75 (H) cms/ c)Drawer Unit Drawer unit made of 18 mm prelaminated particle board, 3 drawer pullouts mounted on sliders, with exposed edges lipped with PVC edge band , 0.5 mm thick central locking system for drawer pullouts Size:-45 (L)x 50 (W) x 65 (H) cms/ d)Keyboard Supplying & fixing plastic injection molded keyboards under the worktopwith telescopic channels./CPU TrolleyMadeout of powder coated 1.6 mm thick ms sheet with adjustable width, front & back open provided with lockable castors.

Maintenance of existing door of aluminium partition

Modular Cubicle for Superintendent(By utilizing existing table) )Modular Cubicle120(H)&75 mm width 80 microns powder coated CRCA partitions with pre punched cut outs to run electric & networking cables. Duel raceways with punch - out to fix electrical and data modules for power & data skirting level & just below table top, Writing board (White Board), Pin up board ( Soft board ). Partition are covered with 9 mm tiles (Prelaminated particle Board/MDF/Fabric Caddied Board) as required by using sliding panel method, Level adjusters and all the visible edges of partitions are covered with curved Aluminium trims. 2 mm thick PVC edge banded Particle Board table top with grommet for wire management. as per the design/ b)Main Table made of 18 mm prelaminated particle board , Knock down fitting, Modesty panel, level adjustor, Visible edges are lipped with 2mm PVC edge band and other edge with.5 mm edge band etc. Size:- 150 (L)x 60(W) x 75 (H) cms/ c)Side Table Side table made of 18 mm prelaminated particle board , Edges are lipped with 2 mm PVC edge band, level adjustors,Hinge door, Lock, Handle etc. Size:- 90 ( L)x 45 (W) x 75 (H) cms/ d)Drawer Unit Drawer unit made of 18 mm prelaminated particle board, 3 drawer pullouts mounted on sliders, with exposed edges lipped with PVC edgeband , 0.5 mm thick central locking system for drawer pullouts.Size:-45 (L)x 50 (W) x 65 (H) cms/e)KeyboardSupplying & fixing plastic injection moulded keyboards under the worktop with telescopic channels./f)CPU TrolleyMadeout of powder coated 1.6 mm thick ms sheet with adjustable width, front & back open provided with lockable castors.

Cupboard /Back unitSize:- 150 (L)x 45 (W) x 75 (H) cms Fully made of 18mm thick prelaminated particle board, knock down fitting, visible edges are lipped with 0.5mm PVC edge band, vertical support to be provided at an intervel of 80-90cm & horizontal pannels to be provided at anintervel of 45 cm; Door, lock, handle, bottom bush etc.

Modular Table with 2nd top for Enquiry, Registration &Renewal Table is integrally fitted with 120(H) modular partition. Table made of 18 mm prelaminated particle board , Knock down fitting, Modesty panel, level adjustor, Visible edges are lipped with 2 mm PVC edge band and other edge with .5 mm edge band etc. (No drawer unit) /b)Side Table Size:- 90 ( L)x 45 (W) x 75 (H) cms /Side table made of 18 mm prelaminated particle board , Edges are lipped with 2 mm PVC edge band, level adjustors, Hinge door, Lock, Handle etc. c)Keyboard Supplying & fixing plastic injection molded keyboards under the worktop with telescopic channels./CPU TrolleyMadeout of powder coated 1.6 mm thick ms sheet with adjustable width, front & back open provided with lockable castors.

Modular Table for Clerk Size:- 120 (L)x60 (W) x 75 (H) cms Table is integrally fitted with 120(H) modular partition. Table made of 18 mm prelaminated particle board , Knock down fitting, Modesty panel, level adjustor, Visible edges are lipped with 2 mm PVC edge band and other edge with .5 mm edge band etc./a)Drawer Unit Drawer unit made of 18 mm prelaminated particle board, 3 drawer pullouts mounted on sliders, with exposed edges lipped with PVC edgeband , 0.5 mm thick central locking system for drawer pullouts. Size:-45 (L)x50 (W) x 65 (H) cms/ b)Keyboard Supplying & fixing plastic injection molded keyboards under the worktop with telescopic channels./CPU TrolleyMadeout of powder coated 1.6 mm thick ms sheet with adjustable width, front & back open provided with lockable castors.

Modular Table for OA/Sweeper Size:- 100(L)x 60 (W) x 75 (H) cms Table made of18 mm prelaminated particle board ,Knock down fitting, Modesty panel, leveladjustor, Visible edges are lipped with 2mm PVC edge band and other edge with.5 mm edge band etc.(Without Accessories)

UPS Plug Point 12 Computer 1.5mm Wire 3 Sir cute 20mm Pipe, Bend & Junction. Including Labour Charge.

Normal Plug ---- Including Labour Charge.1MM Wire 3 Sir cute 20mm Pipe, Bend & Junction.

D-link 16 port 10/100 switch

D-link 16 port CAT6 UTP Patch panel

D-link CAT6 UTP patch cord - 1m

D-link CAT6 UTP patch cord - 2m

D-link Duel/Single face plate

D-link CAT6 cabling

U Rack with fan, cable manager 1 nos,power strip 1 no, tray 1 nos, hardware kit 20 nos

D-link CAT6 IO

J J Industries