Construction of Nagarpalika Library at Devbhoomi Dwarka, Dist. Devbhoomi Dwarka (2nd Attepmt)

Description of Item Unit Total Amount

No. More Or Less Rate In Figure Rate In Words

Clearing and grubbing road land including uprooting rank vegetation grass

Twenty Eight

bushes,shrubs,sapling and trees girth up to 300 mm removal of stumps of trees cut

Thousand Four

earlier and disposal of unserviceable materials (C) By mechanical means in area of light

1 0.12 28,455.09 Hundred Fifty

Five Rupees Nine

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful Six Hundred

materials and disposing off the excavated stuff upto 50 Meter lead.(E) Hard Rock Twenty Seven

Rupees Forty

Seven Paise

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and

Six Hundred Fifty

stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(E)

One Rupees

3 Hard Rock Cmt 157.70 651.26

Twenty Five

Filling in plinth and foundation with sand under floors including watering ramming, Four Hundred

consolidating and dressing complete Eighty One

Rupees Eighty

Three Hundred

including watering, ramming and consolidating etc. complete. (more than 10 ton)

One Rupees

Seventy Seven

Filling available excavated earth (excluding rock) in trenches. plinth, sides of

One Hundred

foundations etc. in layers not exceeding 20 cm. in depth consolidating each

6 Cmt 255.50 136.92 Thirty Six Rupees

disposited layer by ramming and watering.

Ninety One Paise

Carring out plinth treatment to post construction / existing structure by spraying chemical

solution for termite control treatment including labour and material consistent with I.S.I

specification. Using Chlordane and Chiorpurfiles 20 EC. As Per 6131_paret-II

One Hundred

Concentration Weight one percent is recommended i.e one liter 20 EC chemical emulsion

Twenty Four

7 with 19 liter give 1 % concentration inclusive of one liter chemical emulsion application at Smt. 276.20 124.35

Rupees Thirty

the rate of 5 Liter chemical/ Sqm of surface is recommended as per I.S. (The Product

Five Paise

performance shall carry Guarantee for 5 years)

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone

aggregates 20 mm nominal size) and curing complete excluding cost of formwork in (A)

Three Thousand

Foundation and Plinth

Seven Hundred

8 Cmt 153.00 3,784.74 Eighty Four

Rupees Seventy

Four Paise

Providing and laying cement concrete 1:3:6 (1- Cement : 3- Coarse sand : 6- crushed stone

Four Thousand

aggregates 20 mm nominal size) and curing complete including cost of formwork in (A)

One Hundred

9 Wall Caps / Coping Cmt 0.00 4,130.19

Thirty Rupees

Nineteen Paise

GRADE SLAB (M200) : Providing and laying controlled cement concrete M.200 Concrete Four Thousand

with all lead, including all transportation, pumping, pouring, curing of concrete etc Eight Hundred

10 complete including the cost of formwork but excluding the cost of reinforcement for Cmt. 36.50 4,868.00 Sixty Seven

reinforced concrete work in M200 Grade Slab Rupees Ninety

Nine Paise

Providing and laying controlled cement concrete M:25 and curing complete including

Four Thousand

cost of necessary, form work, compacting with vibrator curing centering & shuttering in

Seven Hundred

true line and level etc, but excluding the cost of reinforcement for RCC work in

11 Cmt. 97.20 4,797.50 Ninety Seven

Foundations footings, base of columns and Raft etc., for any type of cross section area

Rupees Fifty

complete as directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing complete including Six Thousand

cost of necessary, form work, compacting with vibrator curing centering & shuttering in Eight Hundred

12 true line and level etc, but excluding the cost of reinforcement for RCC work in column up Cmt. 11.00 6,866.99 Sixty Six Rupees

to plinth lvl. etc., for any type of cross section area complete as directed by E. I. C. Ninety Nine

Providing and laying controlled cement concrete M:25 and curing complete including

Six Thousand

cost of necessary, form work, compacting with vibrator curing centering & shuttering in

Seven Hundred

true line and level etc, but excluding the cost of reinforcement for RCC work in TIE,

13 Cmt. 37.70 6,787.20 Eighty Seven

GROUND, & PLINTH BEAMS for any type of cross sectional area. etc., complete as directed

Rupees Twenty

Providing and laying controlled cement concrete M:25 and curing complete including

cost of necessary, form work, compacting with vibrator curing centering & shuttering in Seven Thousand

true line and level etc, but excluding the cost of reinforcement for RCC work in (F) Wall Nine Hundred

(Vertical and horizontal fins)., & (F1) Wall cap & coping up to G.F. level., etc. Complete, as Eighty Rupees

per detailed & directed by Architect / Consultant & and directed by EIC. Eighty One Paise

Providing and laying controlled cement concrete M:25 and curing complete including

cost of necessary, form work, compacting with vibrator curing centering & shuttering in

Eight Thousand

true line and level etc, but excluding the cost of reinforcement for RCC work in (F) Wall

Twenty Two

15 (Vertical and horizontal fins)., & (F1) Wall cap & coping For First Floor level., etc. Cmt. 2.50 8,022.23

Rupees Twenty

Complete, as per detailed & directed by Architect / Consultant & and directed by EIC.

Tender Rate

Sr. Qty. May

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Less Rate In Figure Rate In Words

Providing and laying controlled cement concrete M:25 and curing complete including

cost of necessary, form work, compacting with vibrator curing centering & shuttering in

Eight Thousand

true line and level etc, but excluding the cost of reinforcement for RCC work in (F) Wall

Sixty Three

16 (Vertical and horizontal fins) & (F1) Wall cap & coping For For Second Floor level., etc. Cmt. 0.20 8,063.64

Rupees Sixty

Complete, as per detailed & directed by Architect / Consultant & and directed by EIC.

Three Paise

Providing and laying controlled cement concrete M:25 and curing complete including

Seven Thousand

cost of necessary, form work, compacting with vibrator curing centering & shuttering in

Nine Hundred

true line and level etc, but excluding the cost of reinforcement for RCC work in (D) For

17 Cmt. 17.50 7,921.94 Twenty One

Columns for any type of cross sectional area for G.F. Lvl. etc., for any type of cross section

Rupees Ninety

area complete as directed by E. I. C.

Three Paise

Providing and laying controlled cement concrete M:25 and curing complete including

Seven Thousand

cost of necessary, form work, compacting with vibrator curing centering & shuttering in

Nine Hundred

true line and level etc, but excluding the cost of reinforcement for RCC work in (D) For

18 Cmt. 15.60 7,963.24 Sixty Three

Columns for any type of cross sectional area Work at First floor etc., for any type of cross

Rupees Twenty

section area complete as directed by E. I. C.

Four Paise

Providing and laying controlled cement concrete M:25 and curing complete including

cost of necessary, form work, compacting with vibrator curing centering & shuttering in

Eight Thousand

true line and level etc, but excluding the cost of reinforcement for RCC work in (D) For

19 Cmt. 5.30 8,004.65 Four Rupees

Columns for any type of cross sectional area Work at Second floor etc., for any type of

Sixty Five Paise

cross section area complete as directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing complete including

cost of necessary, form work, compacting with vibrator curing centering & shuttering in Seven Thousand

true line and level etc, but excluding the cost of reinforcement for RCC work in LINTLE- Twenty Nine

BEAM, LINTEL & SILL & COPING for all cross sectional area at G.F. Lvl. etc., complete as Rupees Forty

directed by E. I. C. Nine Paise

Providing and laying controlled cement concrete M:25 and curing complete including

cost of necessary, form work, compacting with vibrator curing centering & shuttering in

Seven Thousand

true line and level etc, but excluding the cost of reinforcement for RCC work in LINTLE-

21 Cmt. 6.80 7,070.81 Seventy Rupees

BEAM, LINTEL & SILL & COPING for all cross sectional area at F.F. Lvl. etc., complete as

Eighty Paise

directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing complete including

Seven Thousand

cost of necessary, form work, compacting with vibrator curing centering & shuttering in

One Hundred

true line and level etc, but excluding the cost of reinforcement for RCC work in LINTLE-

22 Cmt. 4.40 7,112.22 Twelve Rupees

BEAM, LINTEL & SILL & COPING for all cross sectional area at S.F. Lvl. etc., complete as

Twenty One

directed by E. I. C.

Providing and laying Controlled cement concrete M:25 and Curing Complete for

reinforced concrete Chhajjas up to all floor two level including finishing the exposed Seven Thousand

surfaces with cement mortar 1:3 (1-cement, 3 Fine sand) to give a smooth and even Thirty One

surface centering and formwork and curing complete excluding cost of reinforcement. Rupees Sixty Two

etc., complete as directed by E. I. C. Paise

Providing and laying controlled cement concrete M:25 and curing complete including

cost of necessary, form work, compacting with vibrator curing centering & shuttering in Seven Thousand

true line and level etc, but excluding the cost of reinforcement for RCC work in SLAB Twenty Nine

BEAMS for Ground floor & Super structure, & for any type of cross sectional area. etc., Rupees Forty

complete as directed by E. I. C. Nine Paise

Providing and laying controlled cement concrete M:25 and curing complete including

cost of necessary, form work, compacting with vibrator curing centering & shuttering in

Seven Thousand

true line and level etc, but excluding the cost of reinforcement for RCC work in SLAB

25 Cmt 19.80 7,070.81 Seventy Rupees

BEAMS at First Floor & for any type of cross sectional area. etc., complete as directed by

Eighty Paise

Providing and laying controlled cement concrete M:25 and curing complete including

Seven Thousand

cost of necessary, form work, compacting with vibrator curing centering & shuttering in

One Hundred

true line and level etc, but excluding the cost of reinforcement for RCC work in SLAB

26 Cmt 5.20 7,112.22 Twelve Rupees

BEAMS at Second Floor to Terrace Floor & for any type of cross sectional area. etc.,

Twenty One

complete as directed by E. I. C.

Providing and laying controlled cement concrete M:25 and curing complete including

Six Thousand

cost of necessary, form work, compacting with vibrator curing centering & shuttering in

Seven Hundred

true line and level etc, but excluding the cost of reinforcement for RCC work in Staircase

27 Cmt 13.20 6,781.85 Eighty One

with steps / Kadi Tappa, waist slab and landing at any height and level as directed etc.,

Rupees Eighty

complete as directed by E. I. C.

Four Paise

Providing and laying controlled cement concrete M:25 and curing complete including

cost of necessary, form work, compacting with vibrator curing centering & shuttering in Six Thousand

true line and level etc, but excluding the cost of reinforcement for RCC work at Plinth to Eight Hundred

Ground FLOOR SLAB for all thickness/cross section etc. complete as directed by E. I. C. Nine Rupees

Ninety Two Paise

Providing and laying controlled cement concrete M:25 and curing complete including Six Thousand

cost of necessary, form work, compacting with vibrator curing centering & shuttering in Eight Hundred

29 true line and level etc, but excluding the cost of reinforcement for RCC work at FIRST Cmt 33.40 6,851.34 Fifty One Rupees

FLOOR SLAB for all thickness/cross section etc. as directed by E. I. C. Thirty Three

Providing and laying controlled cement concrete M:25 and curing complete including Six Thousand

cost of necessary, form work, compacting with vibrator curing centering & shuttering in Eight Hundred

30 true line and level etc, but excluding the cost of reinforcement for RCC work in SECOND Cmt 9.90 6,892.64 Ninety Two

FLOOR SLAB for all thickness/cross section etc. complete as directed by E. I. C. Rupees Sixty

Four Paise

Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and

Seventy Seven

placing in position complete upto ground floor level

31 Kg 34195.00 77.29 Rupees Twenty

Eight Paise

Tender Rate

Sr. Qty. May

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Less Rate In Figure Rate In Words

Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and Seventy Eight

32 placing in position complete upto First floor level Kg 10883.00 78.34 Rupees Thirty

Three Paise

Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and Seventy Nine

33 placing in position complete for Second floor to terrace floor Lvl. Kg 3813.00 79.39 Rupees Thirty

Eight Paise

Brick work using common burnt clay building bricks having crushing strength not less than

Four Thousand

35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6. (1- Cement : 6 -fine

Two Hundred

34 sand)(B) Conventional Cmt 43.70 4,214.33

Fourteen Rupees

Thirty Two Paise

Brick work using common burnt clay building bricks having crushing strength not less than Four Thousand

35 kg./Sq.Cm. at Ground floor Lvl. in cement Mortar 1:6 (1-Cement :6-finesand) (B) Four Hundred

35 Conventional For Ground Floor etc. Complete. Cmt 55.40 4,496.05 Ninety Six

Rupees Four

Brick work using common burnt clay building bricks having crushing strength not less than Four Thousand

35 kg./Sq.Cm. at First floor Lvl. in cement Mortar 1:6 (1-Cement :6-finesand) (B) Five Hundred

36 Conventional For First Floor etc. Complete. Cmt 45.30 4,538.48 Thirty Eight

Rupees Forty

Seven Paise

Brick work using common burnt clay building bricks having crushing strength not less than Four Thousand

35 kg./Sq.Cm. at Second floor to terrace floor Lvl. in cement Mortar 1:6 (1-Cement :6- Five Hundred

finesand) (B) Conventional For above First Floor to Terrace Floor etc. Complete, as per Eighty Rupees

detailed & directed by EIC. Ninety Paise

Half brick masonry in common brunt clay building bricks having crushing strength not

Six Hundred

less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse sand ) (B)

Eighty Four

38 Conventional half brick masonry at Ground Floor level.(B) Conventional Smt 117.00 684.26

Rupees Twenty

Half brick masonry in common brunt clay building bricks having crushing strength not

Six Hundred

less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse sand ) (B)

39 Smt 98.00 690.57 Ninety Rupees

Conventional half brick masonry at First to Terrace Floor Lvl.(B) Conventional

Fifty Six Paise

Half brick masonry in common brunt clay building bricks having crushing strength not Six Hundred

less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse sand ) (B) Ninety Six

Conventional half brick masonry at Terrace Floor Lvl.(B) Conventional Rupees Eighty Six

Providing & Fixing chicken mesh jali at R.C.C. masonry joints at any height with all labour

Three Hundred

& material, etc. Complete, as per detailed & directed by EIC.

Twenty Six

Rupees Twelve

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or half

One Hundred

brick walls for interior plastering for Ground floor level and finished even and smooth in

42 Smt 411.30 160.85 Sixty Rupees

(ii) Cement mortar 1:4 (1-cement :4-sand)

Eighty Five Paise

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or half

One Hundred

brick walls for interior plastering for First floor level and finished even and smooth in (ii)

Eighty Four

43 Cement mortar 1:4 (1-cement :4-sand) Smt 394.60 184.75

Rupees Seventy

Four Paise

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or half

Two Hundred

brick walls for interior plastering at Second Floor to Terrace floor level and finished even

44 Smt 130.10 208.65 Eight Rupees

and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand)

Sixty Four Paise

Providing 10mm thick cement plaster in single coat on brick/concrete Ceiling for interior One Hundred

plastering for Ground Floor level and finished even and smooth in (ii) Cement mortar 1:4 Forty Seven

(1- cement :4-sand) Rupees Ninety

Nine Paise

Providing 10mm thick cement plaster in single coat on brick/concrete Ceiling for interior One Hundred

plastering for First Floor level and finished even and smooth in (ii) Cement mortar 1:4 (1- Seventy One

cement :4-sand) Rupees Eighty

Nine Paise

Providing 10mm thick cement plaster in single coat on brick/concrete Ceiling for interior

One Hundred

plastering at Second Floor to terrace floor Lvl. and finished even and smooth in (ii)

Ninety Five

47 Cement mortar 1:4 (1- cement :4-sand) Smt 51.20 195.79

Rupees Seventy

Eight Paise

Providing and applying ready mix concrete plaster on RCC elements to give expose finish

including 2mm thick base coat of same material and 3mm thick top coat of concrete One Thousand

48 platser of approved shade and brand. Job includes proper griding of RCC joints before Smt 456.60 1,016.12 Sixteen Rupees

applying plaster complete with scafolding directed as per Architect and EIC Twelve Paise

Providing 20mm thick double coat external cement plaster on brick/ concrete work for

plastering comprising of base coat of 12mm thick cement plaster in cement mortar (1 Two Hundred

Cement:4 coarse sand) in rough finishing and 8mm thick top coat of cement mortar 1:2 (1 Eighty Three

Cement: 2 Coarse sand) finished rough / with Trovel including scaffolding curing etc. Rupees Ninety

complete. Five Paise

Washed stone grit plaster on exterior walls height upto 10 metre above ground level, in

two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand ), furrowing

the under layer with scratching tool, applying cement slurry on the under layer @ 2 Kg of

Nine Hundred

cement per square metre, top layer 15 mm cement plaster 1:1/ 2:2(1 cement: 1/2 coarse

Ninety Five

50 sand : 2 stone chipping 10 mm nominal size), in panels with groove all around as per Smt 508.40 995.30

Rupees Thirty

approved pattern, including scrubbing and washing the top layer with brushes and water

to expose the stone chippings ,complete as per specification and direction of Engineer-in-

Add for plaster groove in plastered surface or moulding to R.C.C. projections. Forty Three

51 Rmt 551.90 43.05 Rupees Four

Tender Rate

Sr. Qty. May

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Less Rate In Figure Rate In Words

Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of

cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse

One Thousand

sand) laid over and jointed with grey cement slurry mixed with pigment to match the

52 Smt 486.90 1,018.92 Eighteen Rupees

shade of slab including rubbing and polishing etc. complete. (A)

Ninety One Paise

25mm thick

Providing and laying polished kota stone slab 25mm thick in risers of steps,skirting Dedo One Thousand

and pillars laid on 10mm thick cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed One Hundred

53 with gray cement slury mixed with pigment to match the shade of slab including rubbing Smt 41.90 1,144.15 Forty Four

and polishing etc. complete. Rupees Fourteen

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of cement

One Thousand

mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by

Four Hundred

adhesive material including dismentaling of existing flooring and jointed with color

54 Smt 33.50 1,467.72 Sixty Seven

cement slurry including finised with flush pointing & cleaning the surface etc. complete

Rupees Seventy

for antiskit.

Providing and laying Vitrified glazed tiles 8 to 10 mm thick 24" x 24" or as specified in One Thousand

skirting risers of steps and dedo on 10mm thick. cement plaster 1:3 (1-cement: 3-coarse One Hundred

55 sand) and jointed with white cement slurry as per the detailed by Architect & direction of Smt 250.90 1,195.02 Ninety Five

Engineer-in- Charge. Rupees Two

Providing and laying Ceramic tiles 6mm thick in flooring, treads of steps and landing laid

on a bed of 12mm thick Water proof cement plaster with mortar 1:3 (1-cement : 3- One Thousand

coarse sand ) & Water Proofing Chemical Agent and cement vata (10cm. x 10 cm. size) Two Hundred

56 quarter round in cement mortar 1:1 including neat cement finishing, watering etc. Smt 34.00 1,233.51 Thirty Three

complete finishing with flush pointing in white cement. (For UG tank flooring) Rupees Fifty One

Providing and laying Ceramic tiles 6mm thick in skrting, risers of steps and dedo on 10mm One Thousand

thick Water proof cement plaster with mortar 1:3 (1-cement : 3- coarse sand ) & Water Two Hundred

57 Proofing Chemical Agent and finishing with flush pointing in white cement. (For UG Tank Smt 99.00 1,272.55 Seventy Two

walls) Rupees Fifty Four

Providing and fixing 18 mm thick gang saw cut, mirror [Hi-Gloss] polished at all exposed

Surface, Pre-moulded and pre-polished, machine cut Granite of any colour and shade, &

finish, as per detailed by architect / Consultantfor flooring, dado skirting, cladding, steps

and risers, kitchen platforms, vanity counters, window sills , fascias and similar locations

of required size, approved shade, colour and texture laid over 20 mm thick mortar 1:4 (1 Three Thousand

acid proof cement : 4 coarse sand). And In dado/skirting on In dado/skirting on 12 mm Four Hundred

58 thick mortar 1:4 (1 acid proof cement : 4 coarse sand), joints treated with white cement, Smt 159.00 3,400.27

Rupees Twenty

mixed with matching pigment, epoxy touch ups, including Spacer tape 6.4 mm thick x 4 Six Paise

TO 6 mm as per detailed groove, rubbing, curing, moulding and polishing to edges to give

high gloss finish as per concept etc. complete at all levels.

Providing and laying Rough Kota stone slab flooring over 20mm (Average) thick base of

One Thousand

cement mortar 1:6 (1-cement : 6- coarse sand) or L.M. 1.1.5 laid over and jointed with

59 Smt 106.00 1,080.68 Eighty Rupees

grey cement slurry including rubbing and polishing etc. complete. (B) 30mm thick.

Sixty Seven Paise

Providing and fixing sandwich type platform including supplying and fixing granite stone

18 mm thick mirror polished stones in top and side position and vertical strip at front Seven Thousand

over 25 mm thick polished kota stone platform fixing in top and sides and intermediates Four Hundred

60 supports fixing with cement mortar and adhesive and finishing including making recess Smt 3.00 7,478.49 Seventy Eight

for Kitchen/ Laboratory sink etc. complete as approved and directed by Consultant / EIC. Rupees Forty

Nine Paise

Providing and laying broken chine mosaic flooring for terrace using 12 mm to 20 mm

broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain or slope and to be Seven Hundred

tempered to bring mortar creme out upto surface using white cement including rounding Seventy Nine

off junctions and extending them upto 15 cm along the wall,clearing with water and Rupees Sixty

oxalic acid etc. as directed. (The Product performance shall carry Guarantee for 10 years) Nine Paise

Providing and laying cement concrete flooring 1:2:4 (1-cement:2-coarsesand: 4-graded

Three Hundred

stone aggregate 20mm nominal size) laid in one layer and finished with a floating coat of

Thirty Nine

62 neat cement. (B) 50mm thick. Smt 29.30 339.08

Rupees Seven

Providing wood work in frames of Size 12.5 x 10 Cm. for doors, windows, clerestory

windows and other frames, wrought framed and fixed in position with hold fast lugs or

with dash fasteners of required dia & length Incl. Providing and fixing 35 mm thick (or as

specified) ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type,

core of block board construction with frame of 1st class hard wood, with 1mm. thk, ISI Six Thousand

marked designed laminate in any finish on both faces of shutters., slit openings with Seven Hundred

63 bidding Patti & 6mm thk designed acid wash glass,. Stainless Steel butt hinges Smt 41.20 6,771.29 Seventy One

[125x65x2.5mm. IS1281712] with necessary screws, using branded S.S. matt /glossy / Rupees Twenty

platinum finished accessories, Colour / polishing all bidding parts, and also incl. with all Nine Paise

Material, labour, tools, tolerance, scaffolding etc. complete as per concept /direction and

approved by Architect, and directed by Engineer-In-Charge.

Tender Rate

Sr. Qty. May

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Less Rate In Figure Rate In Words

Providing & Fixing Walnut anodized Aluminum Hi-Profile sections (JINDAL-DOMAL Series

OR Equivalent), hI-perfomance Sliding/ Openable window/door with Required thick

toughened designer glass of Saint Gobain or equielent, is used for Aluminum Hi-Profile

Section with necessary accessories and with additional shutter with Stainless Steel

Mosquito net. [In Opening Position always one of Mosquito net shouter should be in

Close Position], captive bead, extremely difficult to remove once glazed, high

performance weather stripping, internal wedge gasket, Bottom, side and top section

Seven Thousand

including necessary filling up the gaps at junctions, with required EPDM rubber/ etc. and

Seven Hundred

ISI ebco make,"Lx. Premium" Required Finish door fixture Accessories As per Architect

64 Concept, High security interlocking bead, Sheet membrane flashing , 2" over jamb Smt 112.40 7,742.61 Forty Two

Rupees Sixty

flashing, New Blocking with new backer rod and sealant, channel glide with runner, slide

fold hinge when ever need of sufficient capacity, with warranty, all types of material,

labour, transportation, tools tolerance and matching required level with Flooring etc.

complete as per Architect concept and as per detailed by Architect / consultant &

Directed by EIC.

Providing and fixing standared extruded of alluminium section of size 63mm x 38.10mm x One Thousand

1.2mm @ Wt. 0.643 Kg/mt with colour anodized alluminium frame for ventilation with 5 One Hundred

65 mm thick frosted glass as details etc complete for Ventilation Smt 4.50 1,175.56 Seventy Five

Rupees Fifty Five

Providing and fixing hydraulic door closer of approved size and make as directed engineer

Six Hundred

in charge. all lift, level and leads.

66 Each 10.00 639.11 Thirty Nine

Rupees Ten Paise

Providing & Fixing M.S. grills of required pattern to wooden frames of windows, RCC or as

One Hundred

specified in drawings etc. with M.S. flats at required spacing & frame around, square or

67 Kg 3295.00 109.08 Nine Rupees

round bars with round headed bolts & nuts or by screws (A) Plain Grill, as per detailed &

Eight Paise

directed by EIC.

Providing, supplying, fixing, fabricating, erecting, aligning the structural steel like pivot

,tubular 'T', 'I" section, angle, plate, beam, channel section, Bar , hollow box or Z purloins,

Round or Square Pipes, of approved make, for built up purloins, roof trusses, columns,

side runners, tie beams, sag rods, base plates gusset plates, cap plates, bearing bracing,

gantry girders, rails, require support, pipes, including all welded or bolted steel structures

of various types with approved I.S.I. mark electrodes, bolts, anchor bolts including cost of

thread, Anchor plate cleats etc. in RCC or masonry work, including cutting, bending,

One Hundred

welding ,fixing, supplying , Fabricating Decorative fevisted section or any structured

Thirty One

68 member required to complete the job for Bridge, Trusses, Canopy, doors, Frame, Railing, Kg 1756.00 131.83

Rupees Eighty

Entrance gate, pergola, Decorative hanging light , New window, parking shed or space

frame or any other required specified area as shown on drawing and detailed

specification or as per design incl. three coats of approved brand primer and two coats of

paints, necessary scaffolding, tools tolerance etc. complete as directed by Engineer In

Charge. (payment will be made for weight of metal used in the work)

Finishing wall with Weather proof exterior emulsion paint on wall surface (two coats) to

give an required shape even shade after thoroughly brushing the surface to remove all One Hundred

69 dirt, and remains of loose powdered materials.etc complete. Smt 601.10 120.26 Twenty Rupees

Twenty Six Paise

Applying two coats of Birla or Asian acrylic lappy ( putty) & two coats of primer at Wall

painting (two coats) with plastic emulsion paint of approved brand & manufacture on One Hundred

undecorated wall surfaces to give an even shade including thoroughly brushing the Twenty Four

surface free from mortar droppings & other foreign matter & sand papered smooth, as Rupees Ninety

per detailed & directed by EIC. Five Paise

Applying two coats of Birla or Asian acrylic lappy ( putty) & two coats of primer at Ceiling

painting (Two coats) with plastic emulsion paint of approved brand and manufacture on

One Hundred

undecorated Ceiling surface to give an even shade including thoroughly brushing the

71 Smt 644.60 130.48 Thirty Rupees

surface free from mortar droppings and other foreign matter and sand papered smooth,

Forty Eight Paise

as per detailed & directed by EIC.

Painting two coats (including priming coat) on new steel and other metal surface with One Hundred

enamel paint, brushing, interior to give an even shade including cleaning the surface an Twenty Eight

even shade including cleanicn the surface of all dirt, dust and other foreign matter. Rupees Sixty Two

Providing and fixing roof panel shall be made out of 0.5 mm thick pre coated GI sheet .

The Precoated sheet shall be of minimum 240 mpa steel grade confirming to IS

14246:1995 and shall have zinc coating of minimum 120 gsm as per IS:277:1992 , 5-7

Eight Hundred

microns epoxy primer on both side of the sheet and polyester top coat 15-18 micron. The

Sixty Seven

73 PPGI Sheet shall have plastic protective guard film of minimum 25 microns to avoid Smt 10.00 867.39

Rupees Thirty

scratches during transportation. The ridge shall be fixed to the steel members by pop

Eight Paise

rivet or self drilling/self stitching fastners @ maximum 450 mm c/c along length of

capping/flashing etc complete .

Providing, fabricating and fixing STAINLESS STEEL RAILING OF AISI-304 grade using 50mm

dia Stainless Steel pipe of 16 gauge, 3 nos. 16mm dia SS pipe of 16 gauge, round

balustrade of 32mm [50mm 16G Grade 304 with glossy finish consisting of 32 NB or

nearest size vertical posts 900 Height at maximum spacing 900c/c with suitable cups at

bottom and top rail of 50 NB or nearest size & intermediate rails of 16 NB or nearest size

etc complete] with complete assembly of SS studs to house the horizontal 16mm pipes

Three Thousand

and top handrail, bend and coupler to be used as per architectural detail drawings for the

Six Hundred

74 railing in parapet, stair etc. including fabricating, hoisting, fixing in position with angle Rmt 51.80 3,646.91

Forty Six Rupees

cleats, holdfast etc. in RCC or masonry in true line level and plumb, including complete

Ninety Paise

assembly, including matt polishing and buffing complete, including scaffolding etc.

complete as directed by EIC.(Actual length of stair railing shall be measured at site & same

shall be paid. No wastage should be measured or paid.)

Tender Rate

Sr. Qty. May

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Less Rate In Figure Rate In Words

Providing, fabricating and fixing STAINLESS STEEL HAND RAIL OF AISI-304 grade using

50mm dia Stainless Steel pipe of 16 gauge, [top rail of 50 NB or nearest size complete]

with complete assembly, bend and coupler to be used as per architectural detail drawings

for the railing in parapet, stair etc. including fabricating, hoisting, fixing in position with One Thousand

angle cleats, holdfast etc. in RCC or masonry in true line level and plumb, including Three Hundred

complete assembly, including matt polishing and buffing complete, including scaffolding Fifty Six Rupees

etc. complete as directed by EIC.(Actual length of stair railing shall be measured at site & Seventeen Paise

same shall be paid. No wastage should be measured or paid.)

Providing and fixing retro Reflective Hi Intensity Micro Prismatic Grade Board using 2mm

Aluminum / 4mm ACP, angle iron 75 x 75 x 6mm. Descaling and degreasing the board as

per requirement using epoxy reflactive process by screen painting as directed etc.

complete including transporting and fixing in C.C. 1:2:4 with necessary excavation curing Seven Thousand

etc. complete as per I.R.C. 67-2012 design. A warranty for 7 years for the Retro reflective Six Hundred Ten

sheeting from original manufacturer & a certified copy of 3 year outdoor exposure test Rupees Sixty Six

report from third party test lab for the product offered shall be submitted by contractor. Paise

(B)Class B Type-4(MDR/ODR) retro reflective sheeting

Water proofing-Providing and applying primer + 2 coats of Single component, high solids,

cold applied liquid polyurethane elastomer waterproof membrane over uniform surface

of slab. Apply 2 coats at dosage of 1.5 kgs per sq.m to achieve the required minimum

DFT of 1.5mm. It should have following properties :-

1. Total Solids % 95 ± 5%

2. Specific Gravity 1.30 ±

3. Elongation % ≥ 700% Nine Hundred

4. Dosage 1.2 - 1.5 kg/m2 in two coats Seventy Nine

77 5. Tack Free Time 24 - 48 hrs

Rupees Fourteen

6. Tensile Strength N/mm² ≥ 2.2 Paise

7. Low Temperature Crack Bridging No crack

8. DFT 1.2 - 1.5 mm on smooth, non- absorbent surface

9. Shore Hardness 40 ±

10. Conformance Conforms to ASTM C

(The Product performance shall carry Guarantee for 10 years)

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block 60mm

thick with grade of concrete M300 pnumatic compressed / vibrated mechanically and as

Seven Hundred

per approved design Confirming to IS 15658 : 2006 including 35 mm Sand layer for

78 Smt 792.22 706.93 Six Rupees

levelling and filling the joint with sand in proper line and level as per guidlines of IRC SP 63-

Ninety Two Paise

2018 etc. Complete

Providing and fixing pre-cast concrete kerb stone of gray cement based concrete block

30cm length, 30cm height and 15cm thick of M200 grade concret as per approved design Four Hundred

79 and including excavation for fixing in proper line and level, filling the joint with C:M 1:3 (1 Rmt 100.00 400.87 Rupees Eighty Six

cement:3 fine sand) etc complete. Paise

CEMENT CONCRETE ROAD WITH EXPANSTION JOINTS.: M-20 Cement Concrete laid in

required slope at concrete floor as directed and specified using necessary steel form work

with M.S. Channels including forming construction & contraction joints 4 mm to 6mm

wide by cutting the floor up to ¼ th depth of thickness of the concrete depth using

mechanical saw and sealing the joint with poly sulphide sealant up to full depth of cutting Seven Thousand

including providing & fixing M.S. dowels bars with bitumen painted of full length as Three Hundred

80 shown in drawing as to form the bays not exceeding 6.0 m X 4.5 m etc. complete as per Cmt 14.40 7,317.60 Seventeen

directed by Architect or Engineer-In-Charge. For all level and leads.(a) For RCC Road Note: Rupees Sixty

Rates are Incl. cost of Cement Concrete Pavement shall be 150mm. Thk. or as detailed Paise

and rolling 2 times as per mentioned above and also all tools tolerance, shuttering,

channel, etc. complete as per detailed & Directed by Architect & EIC.

Providing & Laying & jointing in true line level 110mm dia U.P.V.C. SWR type B pipe

confirming to IS 13592-1992 with one end plain & other end socket with rubbering &

Fixing conforming to ISI 14735-1999 of approved make for drain system pipe line, pipe

shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using Eight Hundred

PVC clamps of the size 160mm dia x 210mm length x 196mm high at every 2000mm Seventy Six

centre to centre or shall be concealed in wall as directed necessary fittings such as bends, Rupees Ninety

shoes, etc. incl. testing of pipe & joint & jointed with adhesive solvent, cement incl. cost Paise

of all material etc. complete as per detailed, directed & approved by the consultant / EIC.

Monobloc pump 3 phase 400/440 volt, 50 Hz AC Supply & 2800 RPM as per IS 9079 at Twenty Four

departmental stores with following MOC: Casing: CI-FG260, Impeller: Bronze & Shaft: Thousand Two

SS:410, 7.5Hp 24 m head Hundred Forty

Control panel- DOL / Star Delta starter suitable for local & remote pump control

Six Thousand

application consisting of MPCB, overload relay and contactors as per Type II coordination

Nine Hundred

83 Nos 1.00 6,993.24 Ninety Three

required protective relays & control accessories.

Rupees Twenty

Four Paise

Providing laying and jointing in true line and level 75mm dia. U.P.V.C. Pipe ( SCH- 40) for

cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the Two Hundred

wall with the help of clamp at every two metre C/C or shall be concealed as directed Eighty Rupees

including necessary fittings etc. including testing of pipe and joints and fixing the same Twenty Three

with adhesive solvent, including cost of all materials. Paise

Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for

cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the

Seventy Two

wall with the help of clamp at every two metre C/C or shall be concealed as directed

85 Rmt. 37.50 72.65 Rupees Sixty

including necessary fittings etc. including testing of pipe and joints and fixing the same

Four Paise

with adhesive solvent, including cost of all materials.

Tender Rate

Sr. Qty. May

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Less Rate In Figure Rate In Words

Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for

cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the

Ninety One

wall with the help of clamp at every two metre C/C or shall be concealed as directed

86 Rmt. 41.00 91.84 Rupees Eighty

including necessary fittings etc. including testing of pipe and joints and fixing the same

Three Paise

with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH- 40) for

cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the One Hundred

wall with the help of clamp at every two metre C/C or shall be concealed as directed Forty Eight

including necessary fittings etc. including testing of pipe and joints and fixing the same Rupees Eleven

with adhesive solvent, including cost of all materials. Paise

Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH- 40) for

cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the One Hundred

wall with the help of clamp at every two metre C/C or shall be concealed as directed Ninety Five

including necessary fittings etc. including testing of pipe and joints and fixing the same Rupees Sixty Six

with adhesive solvent, including cost of all materials. Paise

Providing & Fixing gun metal check or no return full way wheel valve etc. complete as per

Four Hundred

the instruction of EIC. (C) 25 mm. Dia

89 Each 10.00 420.63 Twenty Rupees

Sixty Three Paise

Providing & Fixing gun metal check or no return full way wheel valve etc. complete as per

Six Hundred Sixty

the instruction of EIC. (E) 40 mm. Dia

90 Each 10.00 663.43 Three Rupees

Forty Two Paise

Providing and fixing screw down bib taps of following size.(A) Brass screw down bib tap

Two Hundred

polished bright. (i) 15mm dia.

91 Each 8.00 214.81 Fourteen Rupees

Eighty Paise

Providing and fixing brass screw down stop tap.(B) 20mm dia. Two Hundred

Twenty Three

Rupees Eighty

Providing erecting and fixing double coated ISI water tank of required capacity each with

Three Rupees

93 all necessary fittings and connection etc. complete on terrace Liter 8000.00 3.95

Ninety Four Paise

Providing & Fixing PVC SWR Nahni trap IS 14735 for drain- 100mm diameter with 150 mm

Five Hundred

X 150mm S.S.jali for floor or nahni trap of the following nominal diameter of self

Eighty Six Rupees

94 cleansing design with C.I screed down or hinged grating including the cost of cutting & Each 14.00 586.27

Twenty Seven

making good the walls, as per detailed, directed & approved by the EIC.

Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and water

One Thousand

tight C.I. cover with frame of 300mm x 300mm size (inside) with standard weight.(i)

Two Hundred

Square mouth traps. (A) 100mm x 100mm size P type.

95 Each 8.00 1,292.19 Ninety Two

Rupees Nineteen

Constructing brick masonry chamber for underground C.I. Inspection chamber & bends

with bricks having crushing strength not less than 35Kg. Cm2 in C.M. 1:5 C.I. cover with

frame (Light duty) 455mm x 610mm internal dimensions, total weight of cover with frame

to be not less than 38Kg. (Wt. of cover 23 Kg.) & Wt. of frame 15Kg. ) (R.C.C. top slab with Two Thousand

1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm size) foundation Nine Hundred

96 concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished smooth with a Each 6.00 2,932.93 Thirty Two

floating coat of neat cement on walls & bed concrete for (i) Inside dimensions 455mmx Rupees Ninety

610mm & 450mm deep for single pipe line. etc. complete as per detailed, directed & Two Paise

approved by the consultant / EIC.

Constructing brick masonry manhole with R.c.c. top slab in 1:2:4 mix ( 1 cement : 2 coarse

sand :4 grade stone aggregate 20mm size ) foundation concrete 1:3:6 mix ( 1 cement :

coarse sand :6 brick bats 40 mm size ) inside plaster 15mm thick with CM 1:5 ( 1 cement :

5 Coarse sand ) finished with a floating coat of neat cement & making channels in cement

1:2:4 mix ( 1 cement : 2 coarse sand :4 stone aggregate 20mm nominal size ) finished

Thousand Three

smooth complete including curing & testing… ( I ) inside 900mm x 1200 mm & 1.5 m deep

97 including R.c.c. cover with frame size 560 mm diameter ( A ) with 230mm thick walls of Each 5.00 19,349.63 Hundred Forty

Nine Rupees

brick masonry using brick having crushing strength not less then 35 kg/sqcm in CM 1 : 5 (

Sixty Three Paise

1 cement : 5 coarse sand ), (2) B type depth 1.50 Meter for 150mm diameter sewer.. etc.

complete as per detailed, directed & approved by the consultant / EIC.

Providing Septic Tank of 5.00 mt x 3.00 mt x2.00 mt size for Sewerage including

One Hundred

excavation with any strata up to four meter depth,PCC in Bottom Slab 1:3:6,Brick Work in

Thirty Six

cement mortar 1:5, RCC M200 Slab on Top And bottom, required filling for Tank including

98 Each 1.00 136,015.69 Thousand Fifteen

making Required line for water inlet, precast RCC M.200 Frame & cover etc.as directed by

Rupees Sixty

engineer in charge. etc complete, septic tank as per detailed drawing.

Nine Paise

Providing & Laying & jointing in true line level U.P.V.C. SWR type B pipe confirming to IS

13592-1992 with one end plain & other end socket with rubbering & Fixing conforming to

ISI 14735-1999 of approved make for drain system pipe line, pipe shall be jointed with

each other with rubber lubricant, pipe shall be fixed on wall using PVC clamps of the size

Eight Hundred

160mm dia x 210mm length x 196mm high at every 2000mm centre to centre or shall be

Thirty Four

99 concealed in wall as directed necessary fittings such as bends, shoes, etc. incl. testing of Rmt. 126.00 834.38

Rupees Thirty

pipe & joint & jointed with adhesive solvent, cement incl. cost of all material etc.

Eight Paise

complete as per detailed, directed & approved by the consultant / EIC. (A) 160mm dia.

etc. complete as per detailed, directed & approved by the consultant / EIC.

Providing laying (to level or slopes) and jointing reinforced concrete Light duty non- Six Hundred

pressure pipes I.S. class NP2 of the following internal diameter with collars and butt ends Seventy Eight

prepared for collar joints including testing of joints complete.(D) 300mm Rupees Two

Tender Rate

Sr. Qty. May

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Less Rate In Figure Rate In Words

Providing sock pit of 2.5 Mtr. Internal dia. and 5 mtr Depth internal clear dimention

including the cost of excavation, P.C.C. 1:4:8 and filling brickbats with dry masonry work,

Thirty Five

Honeycomb masonary work, M:20 RCC. SLab incl. form work including FE-500

Thousand Nine

101 Reinforcemnt, M.S.cover, C.I. Pipe & cowl vent, vatas in C.M. 1:3 with finishing curing etc. Each 1.00 35,009.63

Rupees Sixty

complete as directed.. etc. complete as per detailed, directed & approved by the

Three Paise

consultant / EIC.

Providing & Fixing white colour, Vitreous china, under / Over Counter wash basin with

single hole for pillar type with Cl or MS brackets painted white including cutting holes,

ranking bolts for Fixing & marking good the same, including Fixing C.P. Brass waste

Two Thousand

coupling 32mm dia & Bottal trap & 15mm dia pillar tap, Bottle Trap, as approved, capstan

Eight Hundred

head C.P. screwed down high pressure with screw shank & back nuts & rubber plugs,

102 Each 5.00 2,839.77 Thirty Nine

15mm dia brass stop cock (50/75mm p.v.c. Drain connection pipe, Water Connection Pipe

Rupees Seventy

of required Size, & testing the same for leak proof, etc. with all material & labours to

complete this job in all respected manners, etc. complete as per detailed & approved by

the consultant & directed by EIC.

Providing and fixing wash down water closet (European type,Wall hung W.C. Pan) with

integral P or S trap including jointing the trap with soil pipe in Cement Mortar 1:1 (1 -

Cement : 1 - Fine Sand) with plastic seat and cover for wash down water closer with C.P. Seven Thousand

103 brass hinges, C.P. brass toilet paper holder, Jet Spray, Metropole flush valve Incl. Each 4.00 7,001.62 One Rupees Sixty

Connection and rubber buffers. (A) Vitreous China., etc. complete as per detailed & Two Paise

approved by the consultant & directed by EIC.

Providing and fixing water closet squatting Pan including trap and foot rest (Indian type One Thousand

W.C. Pan) size 580mm (Earthwork, bed concrete to be measured and paid for separately) Four Hundred

104 (A) Vitreous China.(I) Long pattern = White colour Each 1.00 1,439.67 Thirty Nine

Rupees Sixty

Seven Paise

Providing and fixing Urinal or approved quality including conecting the Urinal with waste One Thousand

pipe , tap etc. complete.(A) White earthenware flat back or corner type size 430mm x Seventy Four

260mm x 350mm. Rupees Eighty Six

Providing & Fixing C.P. brass towel rail Approved Make complete with C.P. Brass brackets

fixed to wooden plugs with C.P. Brass screws,, etc. complete as per detailed, directed &

Six Hundred

approved by the consultant / EIC. (B) 600mm x 20 mm size, etc. with all material &

106 Each 5.00 616.42 Sixteen Rupees

labours to complete this job in all respected manners, etc. complete as per detailed &

Forty Two Paise

approved by the consultant & directed by EIC.

Providing & Fixing 600mm x 450mm beveled edge mirror of superior glass mounted on

6mm thick A.C. sheet or plywood sheet & Fixing to wooden plugs with C.P. brass screws & Eight Hundred

107 washers, etc. with all material & labours to complete this job in all respected manners, Each 5.00 859.41 Fifty Nine Rupees

etc. complete as per detailed & approved by the consultant & directed by EIC. Forty Paise

Providing & Fixing handicap toilet set with Wall-mounted European Closet & wash basin

& all handicap requirement with dual flush tank, seat & lead (heavy duty) including C.I.

Brackets, C.P. brass hinges, M.S. / C.I. painted brackets, Waste Coupling, 32mm size bottle

trap etc. all Internal fittings complete with grab rails, swin type grab bar etc. rubber Forty Thousand

buffers, C.P nuts, bolts etc making holes in walls & floors, & finishing for ready to use. The Four Hundred

108 rate includes all necessary connection charges as per product detail to the satisfaction of Each 1.00 40,425.96 Twenty Five

Architect / engr. in-charge where required & the final handing over etc. complete as per Rupees Ninety

specifications, drawings & as directed by the Engineer-in-charge. The scope includes Five Paise

Providing and fixing all the necessary fittings of approved brand and as per directed by

Architect/EIC.

Providing & Fixing pillar tap, screw down high pressure with screws, shanks & back nuts.

Three Hundred

(i) 15mm dia.

Eight Rupees

Seventy Two

Providing & Fixing brass screw down stop tap. (A) 15mm dia.

Two Hundred

110 Each 6.00 205.83 Five Rupees

Eighty Two Paise

Providing and fixing Kitchen / Laboratary sink with C.I. or M.S. brackets, painted white

Two Thousand

including cutting holes in walls and making good the same but excluding fittings.

Three Hundred

111 Each 0.00 2,326.66 Twenty Six

Rupees Sixty Five

Providing and Fixing Pipe Hanger on Ceilling for Dutile type Ceilling Piping Work as Per

Seven Hundred

112 Directed By Engineer In Charge Each 10.00 707.00

Seven Rupees

Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing

One Thousand

drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement

One Hundred

113 concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), Each 20.00 1,161.50

Sixty One Rupees

including finishing complete so as to make it leak proof.

Fifty Paise

Providing and laying Precast Lightweight concrete hollow core wall with hollow core

concrete unit of approved make & size of 120 mm thick, 600 mm wide and 2400 mm /

2600 mm / 2850 mm / 3000 mm / 3300 mm in legth made from of controlled cement Eight Hundred

114 concrete M20 having cube compressive strength not less than 20 MPa jointing with high Smt 215.00 850.42 Fifty Rupees

strength & tensile adhesion non-shrink cementitious joint compound / P.U. Foam. Forty Two Paise

(Plaster not required)

Tender Rate

Sr. Qty. May

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Less Rate In Figure Rate In Words

Point wiring in Copper (Modular) Point wiring for Light / Bell with 2-1.5 sq.mm & earth

wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multistrand copper wires, in following type of pipe to be erected concealed in/ on surface

on wall/ceiling complete with 6A Modular type switch / bell push & accessories and earth

Four Hundred

continuity of following type, erected on PVC / Metallic box, single mounting base frame

Eighty Five

115 covered with textured/metallic front plate modules erected on / in wall / ceiling as per Pt. 53.00 485.81

Rupees Eighty

pipe erected, with necessary Lamp holder/ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling

complete Cat. III

Point wiring for secondary light point with 2-1.5 sq.mm & earthwire of 1.5 sq.mm

(green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires,

in following type of pipe to be erected concealed in / flushed on wall/ceiling, complete

with earth continuity and necessary connection with primary light with accessories

One Hundred

erected on Metal / PVC box covered with 3 mm thick PC(Polycarbonet) / Acrylic sheet

Sixty Seven

116 for open / concealed wiring. with necessary Lamp holder / ceiling rose / H.D.Connector as Pt. 78.00 167.66

Rupees Sixty Six

Note:- Maximum up to 6 mtrs length, excess will be considered as Mains for Secondary

Point. (f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete Cat. III

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of .ISI

marked 1.1 KV Grade FRLS PVC insulated multistrand copper wires, in following type of

pipe to be erected concealed in / flushed on wall/ceiling complete with 6A Modular type

switch and hum free EME four or more step type electronic fan regulator with separately

Six Hundred

mounted and accessories with earth continuity of following type erected on PVC /

Seventy Four

117 Metallic box, single mounting base frame covered with textured/metallic front plate Pt. 33.00 674.68

Rupees Sixty

modules erected on / in wall / ceiling as per pipe erected. with necessary ceiling rose /

Eight Paise

H.D.Connector as directed

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling

complete Cat-III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of to

be erected concealed in / on surface of wall / ceiling complete with Modular type switch

& 5 pin Plug erected on PVC / Metallic box covered with appropriate front plate modules Five Hundred Ten

118 erected on / in wall / ceiling as per pipe erected with following type of accessories. Pt. 40.00 510.05 Rupees Five

[I] For 6A Plug with 2-1.5 sq.mm Cu. Wire Paise

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling

complete Cat-III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of to

be erected concealed in / on surface of wall / ceiling complete with Modular type switch

Seven Hundred

& 5 pin Plug erected on PVC / Metallic box covered with appropriate front plate modules

Forty Five

119 erected on / in wall / ceiling as per pipe erected with following type of accessories. Pt. 4.00 745.38

Rupees Thirty

[II] For 16A Plug with 2-2.5 sq.mm Cu. Wire

Eight Paise

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling

complete (FRLS) CAT III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of to

be erected concealed in / on surface of wall / ceiling complete with Modular type switch

& 5 pin Plug erected on PVC / Metallic box covered with appropriate front plate modules Nine Hundred

120 erected on / in wall / ceiling as per pipe erected with following type of accessories. Pt. 6.00 915.06 Fifteen Rupees

[III] For 16A Plug with 2-4 sq.mm Cu. Wire Six Paise

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling

complete (FRLS) CAT III

Point wiring for Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC /

Two Hundred

Metallic box, single mounting base frame covered with textured / metallic front plate

Fifty Seven

121 modules erected on / in wall / ceiling with following type accessories. Pt. 80.00 257.55

Rupees Fifty Five

Single mounting base-frame & Textured / Metallic front plates. Cat-III

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth wire of

sq.mm (green) both are of .ISI marked 1.1 KV grade FRLS PVC insulated multistrand

copper wires, in following type of pipe to be erected concealed in / flushed on wall/ceiling

,complete with 6A Modular type switches and following type of accessories erected on Six Hundred

PVC / Metallic box, single mounting base frame covered with textured / metallic front Three Rupees

plate modules erected on / in wall / ceiling as per pipe erected. with necessary Ninety Eight

batten/angle holder or ceiling rose or H.D.Connector as directed. Paise

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling

complete Cat-III

Providing following type of Modular Type Accessories mounted with pvc / metallic box,

single mounting base frame covered with textured / metallic front plate , modules Twenty Five

123 erected with necessary connection. As desired by Engineer In charge Ea. 20.00 25.25 Rupees Twenty

(7) Blank Plate Single Cat-III Five Paise

Decorative call bell Ting-tong box type 250 volts complete erected

Seventy One

124 Ea. 1.00 71.71 Rupees Seventy

Providing following type of Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame covered with textured / metallic/white One Hundred

125 front plate , modules erected with necessary connections as per site situation directed by Ea. 11.00 160.59 Sixty Rupees

Engineer In charge. Fifty Nine Paise

(8) Computer RJ-45 socket cat - III

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete

Thirty Three

to be erected on/in wall or ceiling erected with necessary PVC fittings & Junction boxes

126 Mtr. 500.00 33.33 Rupees Thirty

fixed with adhesive solution & Clamps with following dia of pipes, in approved manner as

Three Paise

directed b) 25 mm

Tender Rate

Sr. Qty. May

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Less Rate In Figure Rate In Words

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete

Sixty Seven

to be erected on/in wall or ceiling erected with necessary PVC fittings & Junction boxes

127 Mtr. 40.00 67.67 Rupees Sixty

fixed with adhesive solution & Clamps with following dia of pipes, in approved manner as

Seven Paise

directed d) 40 mm

Providing & erecting PVC Corrugated Flexible Conduit with required nos. of coupling, PVC

Twenty One

bushes, Check-nuts etc. complete of following sizes. (2) 25 mm

128 Mtr. 200.00 21.21 Rupees Twenty

(A) Supplying and laying UPVC cable trunking system comprising unplasticised polyvinyl,

Two Hundred

chloride rigid material with ignition free & flame proof confirming BS .All necessary

Seventy Seven

129 accessories and measuring of following sizes. (1) 75 mm x 50 mm trunking Mtr. 70.00 277.75

Rupees Seventy

Five Paise

(A) Supplying and laying UPVC cable trunking system comprising unplasticised polyvinyl, One Hundred

chloride rigid material with ignition free & flame proof confirming BS .All necessary Eighty Eight

accessories and measuring of following sizes. (3) 50 mm x 50 mm trunking Rupees Eighty

Seven Paise

Mains & Wires

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire

in following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq.

mm copper conductor FRLS PVC insulated stranded wire of green colour for earth Sixty Two Rupees

continuity of following size (general wiring + in street light) Sixty Two Paise

(a) with medium class Rigid PVC pipe and accessories

(a) 2 wire 1.5 sq. mm

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire

in following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq.

mm copper conductor FRLS PVC insulated stranded wire of green colour for earth Eighty Two

132 continuity of following size (general wiring + in street light) Mtr. 1200.00 82.82 Rupees Eighty

(a) with medium class Rigid PVC pipe and accessories Two Paise

(b) 2 wire 2.5 sq. mm (FRLS)

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire

in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper One Hundred

133 conductor FRLS PVC insulated stranded wire of green colour for earth continuity of Mtr. 250.00 112.11 Twelve Rupees

following size (FRLS) (a) with medium class Rigid PVC pipe and accessories (a) 2 wire 4 sq. Eleven Paise

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium Two Hundred

conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / Eighty Four

pipe of following size of cables Rupees Eighty

(C) 3 1/2 core 50 Sq. mm ( 25 Sq.1/2 mm core) Two Paise

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper Two Hundred

conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / Eighty Seven

pipe at road crossing or floor of following size of cable. (B) 3 core 4 Sq. mm Rupees Eighty

Five Paise

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand / Solid Copper Three Hundred

conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / Sixty Four

pipe at road crossing or floor of following size of cables. (B) 4 core 4 Sq. mm Rupees Sixty One

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand / Solid Copper

Five Hundred Ten

conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench /

137 Mtr. 300.00 510.05 Rupees Five

pipe at road crossing or floor of following size of cables. (C) 4 core 6 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper Six Hundred

conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / Seventy Six

pipe at road crossing or floor of following size of cables. (A) 4 core 10 Sq. mm Rupees Seventy

Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv grade ISI

Forty Six Rupees

139 marked copper wires of following size to be erected as directed.(e) 1.50 Sq.mm 3 core Mtr. 250.00 46.46

Forty Six Paise

round PVC sheathed

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC

Thirty Three

insulated armoured cable complete with out going tails, insulating tape etc for following

140 Ea. 8.00 33.33 Rupees Thirty

size of cables.

Three Paise

(A) 2 to 4 core 2.5 / 4 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC

Thirty Eight

insulated armoured cable complete with out going tails, insulating tape etc for following

141 Ea. 6.00 38.38 Rupees Thirty

size of cables.

Eight Paise

(B) 2 to 4 core 6 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC

Thirty Eight

insulated armoured cable complete with out going tails, insulating tape etc for following

142 Ea. 4.00 38.38 Rupees Thirty

size of cables.

Eight Paise

(C) 2 to 4 core 10 Sq. mm

Providing and, fixing heavy duty flange type brass double compression type cable gland

Seventy Five

with rubber ring for PVC insulated armoured cable complete with out going tails,

143 Ea. 2.00 75.75 Rupees Seventy

insulating tape etc for following size of cables. (B) 3 & 1/2 core 35/50 Sq. mm

Five Paise

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following

size evenly crimped with high pressure tool & connected to switchgear terminals with Fifteen Rupees

brass/cadmium plated nut bolts in an approved manner. (C) 16/25 Sq.mm. Fifteen Paise

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following

size evenly crimped with high pressure tool & connected to switchgear terminals with Twenty Rupees

brass/cadmium plated nut bolts in an approved manner. (D) 35/50 Sq.mm. Twenty Paise

Solder less crimping type Copper lugs conforming to IS suitable for cable of following size

evenly crimped with high pressure tool & connected to switchgear terminals with Eight Rupees

brass/cadmium plated nut bolts in an approved manner. (A) 1.5/2.5 to 6 Sq.mm Eight Paise

Solder less crimping type Copper lugs conforming to IS suitable for cable of following size

evenly crimped with high pressure tool & connected to switchgear terminals with Ten Rupees Ten

brass/cadmium plated nut bolts in an approved manner. (B) 10 Sq.mm Paise

Tender Rate

Sr. Qty. May

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Less Rate In Figure Rate In Words

Making trench in soft soil of suitable width of 90 cms deep for laying cable or locating the

Fifty Five Rupees

148 fault all over the run and backfilling the same and making the surface as normal ground. Mtr. 200.00 55.55

Fifty Five Paise

Providing & laying approved make Double walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with necessary connecting accessories of same

Sixty Two Rupees

149 material at required depth for laying of cable. below ground / road surface for enclosing Mtr. 160.00 62.62

Sixty Two Paise

cable and back filling the same to make ground as per original. (A)50 mm dia

Providing & laying approved make Double walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with necessary connecting accessories of same

Ninety Five

material at required depth for laying of cable. below ground / road surface for enclosing

150 Mtr. 180.00 95.95 Rupees Ninety

cable and back filling the same to make ground as per original. (C)90 mm dia

Five Paise

Providing and erecting Approved make Four pole moulded case circuit breaker having

Six Thousand

breaking capacity ICU of 25 KA. at 415 V,having normal current rating up to 25 A to 100A.

One Hundred

with Fixed thermal & magnetic release suitable to work on A.C. supply 50 c/s. with all

151 Ea. 1.00 6,173.12 Seventy Three

internal connections, spreader tinned copper & complete erected in existing 16 G.M.S.

Rupees Twelve

housing. ICS=100% of ICU only Cat III

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate

One Hundred

on 240 V A.C. system and having breaking capacity 10 KA to be erected in existing box.

152 Ea. 93.00 112.11 Twelve Rupees

confirming to IS 8828/1996 with ISI Mark - Cat III

Eleven Paise

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having

Six Hundred Sixty

10KA breaking capacity & confirms to IS :8828 in existing box having following capacity

153 Ea. 4.00 668.62 Eight Rupees

(b)40 Amp. Cat.III

Sixty Two Paise

Providing & erecting 415 V MCB three Pole for Motor & Inductive Load (C Curve) having Five Hundred

10KA breaking capacity & confirms to IS :8828 in existing box having following capacity Eighty Seven

(a) 6 to 32 Amp. Cat.III Rupees Eighty

Providing & erecting 415 V MCB three Pole for Motor & Inductive Load (C Curve) having Six Hundred

10KA breaking capacity & confirms to IS :8828 in existing box having following capacity Forty Seven

(b)40 Amp. Cat.III Rupees Forty

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface

mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & One Thousand

3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be One Hundred

used of same company of MCB to be used) suitable for (A) single phase incoming and Fifty Two Rupees

horizontal single phase outgoing (b) sheet steel double door (IP-43) (iii)8 way Forty One Paise

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface

mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 &

Two Thousand

3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be

Nine Hundred

157 used of same company of MCB to be used) suitable for (B) three phase incoming and Ea. 4.00 2,913.85

Thirteen Rupees

single phase horizontal type outgoing Per phase isolation type (PPI) (b) sheet steel double

Eighty Five Paise

door (ii)6 way

Providing and erecting Sheet Steel powder coated Vertical MCB distribution board (VTPN)

- flush / surface mounted double door (IP54) fitted with insulated copper busbar, isolated

neutral link, earth bar and DIN rail, confirming to IS 13032 and BS 5486-1986,IP-54

Thousand Six

suitable for 63/100 AMP TPN MCCB + RCCB as incomer and three phase outgoing as per

158 Ea. 1.00 18,663.60 Hundred Sixty

following .(The DBs should be used of same company of MCB to be used)

Three Rupees

(D)12 way outgoing

Fifty Nine Paise

providing and erecting Approved make RCCBs conforming to IS: 12640 and having

One Thousand

sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for

Nine Hundred

operation on single phase 240 V,50Hz. having characteristic of quick action & tripping

159 Ea. 10.00 1,969.50 Sixty Nine

with all advance feature & do not incorporate any electronic component. for following

Rupees Fifty

Max. rating erected as directed (i) 25 Amps.DP Cat. III

Supplying & erecting approved make IP 55 grade Company fabricated Timer Panel of

following capacity for switch On-Off street lights on time scheduling basis made from

Twelve Thousand

16G CRCA sheet duly epoxy power painted inside and outside with hinged doors and

Three Hundred

locking arrangement consisting of suitable size of 4 Pole MCB and 4 pole contactor (cat-

160 Ea. 1.00 12,399.77 Ninety Nine

III)with analog time switch, auto manual switch of same make and suitable input and

Rupees Seventy

output Bakelite terminals and with door earthing approved by Engineer in charge.(A)

Seven Paise

providing and erecting Approved make RCCBs conforming to IS: 12640 and having

Two Thousand

sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for

Two Hundred

operation on single phase 240 V,50Hz. having characteristic of quick action & tripping

161 Ea. 6.00 2,235.13 Thirty Five

with all advance feature & do not incorporate any electronic component. for following

Rupees Thirteen

Max. rating erected as directed (ii) 40Amps. DP Cat. III

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/ aluminium die cast powder coated and high U.V.

& corrosion resistance with diffuser with company mark/name 160V to 270V, Power

Factor more than 0.95, THD < 15%,

Two Hundred

CCT 3000 K to 6500K,

Ninety Five

162 Luminaire efficacy> 85 lumens/watt ,LED Nos. 10.00 295.93

Rupees Ninety

LED driver efficiency > 85 %

Three Paise

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown

capacity between the ranges shown.) (iii) 18-20 Watts, Surge - 2KV,IP-20, conventional

feet Cat-lll

Tender Rate

Sr. Qty. May

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Less Rate In Figure Rate In Words

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and

high U.V. & corrosion resistance with diffuser housed in aluminium casted body with

company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

Two Hundred

CCT 3000 K to 6500K,

163 Luminaire efficacy> 85 lumens/watt , Nos. 11.00 220.18 Twenty Rupees

Eighteen Paise

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown

capacity between the ranges shown.) (A) Circular shaped Surface/Recessed Mount

Downlight with provision for spring loaded mounting clips complete.IP20 (i) 9 watts,Surge-

2 KV Cat-lll

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and

high U.V. & corrosion resistance with diffuser housed in aluminium casted body with

company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %, Four Hundred

CCT 3000 K to 6500K, Twenty Seven

164 Luminaire efficacy> 85 lumens/watt , Nos. 29.00 427.23

Rupees Twenty

LED driver efficiency > 85 % Three Paise

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown

capacity between the ranges shown.) (A) Circular shaped Surface/Recessed Mount

Downlight with provision for spring loaded mounting clips complete.IP20 (ii) 11 watts,

Surge-2 KV Cat-lll

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and

high U.V. & corrosion resistance with diffuser housed in aluminium casted body with

company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

Seven Hundred

CCT 3000 K to 6500K,

Fifty Eight

165 Luminaire efficacy> 85 lumens/watt , Nos. 87.00 758.51

Rupees Fifty One

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown

capacity between the ranges shown.) (A) Circular shaped Surface/Recessed Mount

Downlight with provision for spring loaded mounting clips complete.IP20 (iv) 24 watts,

Surge-2 KV Cat-lll

Supplying and erecting LED street light / Flood light fittings with High power White LEDs

wattage of 3 Watt and above assembled on single MCPCB, efficiency more than 130 lm/w

and corrosion free High pressure die cast aluminium housing with smooth finish powder

coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses

with company mark/name engraved or embossed 160 to 270 V,Power Factor more than

Two Thousand

0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy>

Two Hundred

166 lumens/watt . LED driver efficiency > 85 %.( fittings required LM-79 & LM-80 Nos. 10.00 2,201.80

One Rupees

certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED

Eighty Paise

shown.) (A) Street Light (IP-65), Surge protection -4KV integral and ,Light must have

440VAC line supply with over-voltage protection. (iii) 36 watts Cat-lll

Providing and erecting PVC body surface or pendent mounting LED Bulk type 9 watt

Seven Hundred

Lighting Fitting with electronic driver. And lumen output from luminaire 720lm , input

Eighty Seven

167 voltage range 90-300VAC , 50Hz cool white(3000 to 6500k), inbuilt driver, -20degC to Nos. 5.00 787.80

Rupees Eighty

+60degC working temperature, AL frame with Beam Angle 120deg

Supplying & erecting Galvanized M.S pipe post “B” class 88.9 mm O.D 4 mtr. Long duly

Three Thousand

painted with two coats of aluminium paint complete with metallic base plate of 300 mm

Two Hundred

x 300 mm x 4mm thick for using as a compound light pole with approx. weight 32 Kg.

168 Nos. 10.00 3,225.94 Twenty Five

Rupees Ninety

Four Paise

Providing and erecting street light pole bracket comprising main B Class MS pipe of

cm/require outside dia. complete with suitable B Class M.S. sleeve tubing of approx.

45cms.length and suitable for 76.5 mm / 80mm. / require size pole top having sufficient

fasteners for fixing the brackets and having spread of 1 mtr. length with suitable rise as Five Hundred

169 per site condition & suitable welded stiffener reducer and nipple with check nut complete Nos. 10.00 561.56 Sixty One Rupees

painted with one coat of Red oxide / PU base primer and two coats of Aluminium / PU Fifty Six Paise

paint. paint with following nos of arms. [A] Single Arm bracket 1 Mtr

Providing & erecting approved make street light / wall mounting junction box

compression moulded from SMC (thermoset plastic) vertical sliding cover having locking

Six Hundred

with square head stud loop in / loop out in built terminal suitable for four core cable,

170 Nos. 10.00 616.10 Sixteen Rupees

waterproof of I.P. 54 protected with clamp or bolt nut & earth bolt of following size. (B)

Providing 1:2:4 cement concrete foundation & 70 % PCC from bottom including

excavation for the pole of size 45 x 45 x 100 cm. Deep in below ground level with plinth of Eight Hundred

171 45 cm x 45 cm (or 45 cm dia x 45 cm) high upper ground level with necessary curing and Nos. 10.00 809.01 Nine Rupees and

finishing in approved manner. ( for 4 & 6 mtr pole) One Cent

Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan with double ball

bearing ISI mark with Condenser 230 volt A.C. 50 Hz 1200 mm sweep complete having

3blades with aluminium blades with , canopy & 30 cm. down rod erected with Two Thousand

172 earthing.(Make shall be approved by Engineer in charge) including Supplying and erecting Nos. 33.00 2,056.36 Fifty Six Rupees

19 / 20 mm. nominal bore Medium Class M.S. Pipe down rod erected duly painted for fan Thirty Six Paise

complete with proper insulation without leakage and earthing.

Tender Rate

Sr. Qty. May

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Less Rate In Figure Rate In Words

Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the RCC bars up

One Hundred

to 50mm length each side and pierced through a 16 Gauge M.S. box / Heavy Duty PVC

173 Nos. 33.00 108.07 Eight Rupees

box complete erected concealed in Ceiling with necessary finishing.

Seven Paise

Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fan box.

Eighteen Rupees

Eighteen Paise

Supplying & erecting approved make low noise decorative exhaust fan having square

frame ABS body with inbuilt lowers & square frame. 250mm with 1350 RPM Cat.II One Thousand

Three Hundred

Sixty Six Rupees

Fifty Three Paise

Providing and erecting required size HOT dipped Galvanised iron strip for earthing of H.T.

Seventy Seven

, OCB/ ACB/ Transformer LT panel board, Motors etc. using proper clamp.

176 Kg. 100.00 77.77 Rupees Seventy

Seven Paise

Providing and erecting required size Copper strip for earthing of H.T. OCB / ACB/

Seven Hundred

Transformer, LT panel board, Motors etc. using copper clamp.

Ninety Four

Rupees Eighty

Seven Paise

Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG.Using for DB

Seventy Seven

earthing wire 8 to 16 SWG.

178 Kg. 50.00 77.77 Rupees Seventy

Seven Paise

Supplying & erecting in earthpit of minimum bore dia. 225mm size approved make Safe

Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of

corrosion free hot dipped G.I.Pipes having Outer pipe dia of 80 mm having 80-200

Micron galvanising, Inner pipe dia of 40 mm having 200-250 Micron galvanising,

connection terminal dia of 14 mm with constant ohmic value surrounded by highly

conductive compound with high charge dissipation suitable for following type of

applications with chamber and heavy duty cover (A)(approved make OEM has to submit

test certificate including value of earth resistance of installation duly stamped and signed

by agency and officer Incharge has to ensure the value of earthing resistane mentioned in Seven Thousand

test Certificate) & having back filling compound of (B) Inner chemical (CCM Compound)- Ninety Five

179 Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no Ea. 2.00 7,095.25

Rupees Twenty

load & dry form, Sulphar content:- <2%(C) Back fill Compound :- Earthing compound Five Paise

should be capable to retain moisture for long time Necessary test report must be

submitted by Agency. [B] For Electrical installation up to 11 KV located in other than

normal soil i.e. Soft Rock, Marshy Soil etc.

-Length of Pipe : 2 mtr

-Back filling Compound :1 no. Bag of 25 Kg.

Supplying & erecting in earthpit of minimum bore dia. 225mm size approved make Safe

Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of

corrosion free hot dipped G.I.Pipes having Outer pipe dia of 80 mm having 80-200

Micron galvanising, Inner pipe dia of 40 mm having 200-250 Micron galvanising,

connection terminal dia of 14 mm with constant ohmic value surrounded by highly

conductive compound with high charge dissipation suitable for following type of

applications with chamber and heavy duty cover (A)(approved make OEM has to submit

test certificate including value of earth resistance of installation duly stamped and signed

by agency and officer Incharge has to ensure the value of earthing resistane mentioned in

Ten Thousand

test Certificate) & having back filling compound of (B) Inner chemical (CCM Compound)-

Five Hundred

Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no

180 load & dry form, Sulphar content:- <2%(C) Back fill Compound :- Earthing compound Ea. 2.00 10,593.89 Ninety Three

Rupees Eighty

should be capable to retain moisture for long time Necessary test report must be

Nine Paise

submitted by Agency. [C] For Electrical Installation covering Transformer Neutrals,

Lightning arrester Earthing, A.C.Plant & Sensitive Computer System(like

Automation, SCADA)i.e. independent Earthing located in other than normal soil i.e.

Soft Rock, Marshy Soil etc..

-Length of Pipe : 3 Mtrs.

-Back filling Compound :2 nos Bags of 25 Kg.

Supplying & erecting approved make LAN cable of following size in existing pipe as per Forty Seven

181 direction. [C] CAT - 6 RMT 1190.00 47.47 Rupees Forty

Seven Paise

Supplying and erecting approved make online Un-interruptible Power Supply system

comprising flat cum-boost charger with IGBT base rectifier & Inverter & sealed

maintenance free SMF batteries. The charger having operating capacity for input 160- Eighty Two

270V AC & inverter having output 230V,50 Hz Ac with 0.8 load power factor with Thousand Nine

182 battery, over/under voltage output with over load & short circuit protection equipment. Nos. 1.00 82,941.20 Hundred Forty

The system housed in CRC sheet duly powder coated paint with following power One Rupees

backup.with MS painted batteries stand, 10% Overload capacity for momentary load. (C) Twenty Paise

3 KVA with 1Hr Backup

Providing and erecting water cooler having storage capacity 80Ltr. & cooling capacity

Ltr.per hour @ an ambient temp of 45˚ C. The outlet temp. of the water should drop by Forty Nine

15˚ C within a hour, The water cooler should be comprising of hermetically sealed Thousand Five

183 compressor, fan motor, condensing unit, water tank surrounded by evaporating coil, Ea. 1.00 49,559.69 Hundred Fifty

thermostats, relay etc. complete with necessary inlet & outlet connection. The body of Nine Rupees

water cooler will be made from Stainless Steel. ◦ Sixty Nine Paise

Supplying & erecting 5 stage single reverse osmosis water purification system with M.S.

Twenty Nine

powder coated frame, prefilter housing with 'O' ring presediment filter GAC filter, carbon

Thousand One

filter suitable buster DC pump capacity 80 psi, mention with 40 psi inline type post carbon

Hundred Eighty

184 filter auto low & high pressure switches with following size of storage tank & LPH capacity Ea. 1.00 29,187.99

Seven Rupees

& erected as directed [C] 50 Ltr / Hr with 150 psi 2 nos booster pump

Ninety Nine

Tender Rate

Sr. Qty. May

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Less Rate In Figure Rate In Words

Providing Water proof straight Joint in PVC insulated flat flexible copper cable by using One Hundred

insulating material, water proofing material, & making the joint complete. (A) Up to Eighty Nine

10Sq. mm Rupees Eighty

Eight Paise

SITC OF DOME TYPE CAMERA - 4MP IPCP-UNC-DA41L3C-D-Q CPPLUS MAKE AS PER

SPECIFICATIONS : 1/2.9” 4MP PS CMOS Image Sensor (0.8758 centimeters) Max. 4MP

Four Thousand

(2688 × 1520)@1-25/30fps/ (2560 × 1440)@1-25/30 Instastream, H.265, H.264, H.264H,

One Hundred

186 H.264B, MJPEG Support Triple stream WDR (120dB), Day/Night(ICR), 3D NR, AWB, AGC, Nos 13.00 4,156.15

Fifty Six Rupees

BLC, HLC, Digital watermarking3.6mm fixed Lens Support Built-in Mic IR Range of 30 Mtr.,

Fifteen Paise

IP67, PoE complete with rj45 connector crimping, PVC back box

SITC OF BULLET TYPE CAMERA - 4MP IPCP-UNC-TC41L5C-VMD-LQ CPPLUS MAKE AS PER

SPECIFICATIONS : 1/2.7" 4MP PS CMOS Image Sensor (0.9407 Centimeters) Max. 4MP

(2688 × 1520)@1-25/30fps/ (2560 × 1440)@1-25/30 Instastream, H.265, H.264, H.264H,

Eight Thousand

187 H.264B, MJPEG Support Triple stream WDR (120dB), Day/Night(ICR), 3D NR, AWB, AGC, Nos 6.00 8,080.00

Eighty Rupees

BLC, HLC, Digital watermarking3.6mm fixed Lens Support Built-in Mic IR Range of 50 Mtr.,

IP67, PoE complete with rj45 connector crimping, PVC back box

SITC OF 32 CHANNEL NVR - CP-UNR-4K4322-V4 - 2 SATA - CP PLUS MAKE - 32 Ch. 4K

Network Video Recorder AS PER SPECIFICATIONS : Up to 32 channel IP camera input Max.

decoding capability: 8 × 1080p@30 fps, 2 × 8 MP@30 fps Smart Instastream/H.265/H.264

/MJPEG Max. 160/128/60 Mbps incoming/recording/outgoing bandwidth Support 2 SATA

Thousand One

188 HDDs up to 20TB, 2 (1 front USB 2.0 port, 1 rear USB 2.0 port) HDMI / VGA simultaneous Nos 1.00 18,180.00

Hundred Eighty

video output Support Multi-brand network cameras ONVIF Version 2.4 conformance

Mobile Software: iCMOB, gCMOB CMS Software: KVMS, KVMS Pro Lite

Supply Installation Testing & Commissioning of 4TB Surveillance Harddisk

Thousand Three

189 Nos 1.00 13,352.20 Hundred Fifty

Two Rupees

Twenty Paise

SITC OF 16PORT POE NETWORK SWITCH - SG1218MPE TPLINK AS PER SPECIFICATIONS :

16× PoE+ gigabit RJ45 ports, 2× combo gigabit SFP slots.

PoE power budget is up to 250 W, making it ideal for small to medium business

surveillance systems. Port Priority is able to guarantee the quality of sensitive application

Fifteen Thousand

like video monitor. PoE Auto Recovery automatically reboots your dropped or

190 Nos 3.00 15,150.00 One Hundred

unresponsive PoE-powered devices.

Fifty Rupees

Intelligent power management protects the switch from overload. QoS ensures smooth

traffic for latency sensitive applications. IGMP Snooping optimizes multimedia traffic

delivery, such as IPTV.

SITC of Dual Band Wireless Cable Router, Wi-Fi Speed Up to 867 Mbps/5 GHz +

Three Thousand

191 Mbps/2.4 GHz, Supports Parental Control, Guest Wi-Fi, VPN - TP-Link Archer C50 AC1200 Nos 2.00 3,030.00

Thirty Rupees

or equivalent

SITC OF 43" LED monitor / TV - NEXTVIEW MODEL NO. Nv2fh43s9

Twenty Three

Thousand Four

192 Nos 1.00 23,482.50 Hundred Eighty

Two Rupees Fifty

SITC OF 15U NETWORK RACK - Power Strip with necessory sockets, mounting trays, Nine Thousand

exhaust fan complete with accessoreis - 600 X 600MM approx. size -- Elirix make Five Hundred

Ninety Five

Supplying & erecting Philips / Ahuja / CKS make PA Ceiling speaker input Power:8 Watt

Two Thousand

RMS Power Taps:8/4/2W on 100 V Freq.Responce:60-15,000Hz, SPL

Two Hundred

194 (1w/1m):92db,Dim./Wt: ø 227 X H77mm/0.78kg, Model no.CS-6081T Nos 20.00 2,222.00

Twenty Two

Supplying & erecting Philips/ Ahuja / CKS make Amplifier having following specification:

Power Output :250W (RMS) (300W Max.), inputs : 6 Misc. & 2 Aux., frequency Response

:50-1500HZ I3db, Tone, Controls :Cut & Boost type, LED Meter : 5 LED Arrays, The Twenty Two

amplifier suitable to operate 240V A.C.& 24volt D.C. (Battery) with automatic changeover Thousand Seven

from AC to Battery operation, duly protected by wrong Battery Polarity connections. Hundred Twenty

Five Rupees

Supplying & erecting Mixing Console having channels, Audio mixer with. Echo facility for

live performance, Auditorium & stadiums, having following features & facilities. (a)input

Channels :- Each channel has separate

6.25mm size balanced phone jack for mike & line for balanced & unbalanced signals

(b)Individual gain control for sating optimum level for minimum noise (c)BASS, MID &

TREBLE ‘ controls Separately for each input channel (d)ECHO control for each channel

(e)PAN control for echo channel for left or right output (f) AUX Control : To control , level

of the channel in final mix to AUX sound output (g)Channel ON/OFF switch (h)ECHO

Section :- ECHO, reverb & Chorus effect can be added to all input channel by different

setting of Delay, Reverb & Level control (i)Tape section (j)Aux. send & return For sending

Pre-feeder output of channel for monitoring or adding a special effect unit (k)Mono / Thirty Eight

Stereo output controls (m) Head phone output for monitoring purpose. Thousand Six

196 Technical specification: Nos 2.00 38,632.50 Hundred Thirty

(a)Power Requirement -AC220-24OV 50 Hz DC 24 Volts (b)MIC Output Impedance/gain -2 Two Rupees Fifty

K Ohms/ 62 dB (c)Line Output Balance/42 dB —- 20 K ohms (d) Impedance / Gain :- Paise

10Kohms unbalance / 42 dB (e)frequency Response - 30 Hz- 20 KHz L / R Line Output ( +

-1 dB ) (f)Equalization Bass/ - + / - 12 dB at 100Hz Mid / Treble 2 KHz / 10 KHz (g) Outputs,

Line Output Line Output Low : -10 dB / -2 dBM , Line Output High : 0 dBM / +17 dBM (775

mv / 5.5 V ) (h) S/N ratio Line Output Level : > 70 dB (0 dB, 0.775V) The Console shall be

mounted on standard Rack,

The channel of following numbers. (A) 14 Channel Audio Mixer with ECHO

Tender Rate

Sr. Qty. May

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Less Rate In Figure Rate In Words

Supplying and erecting Philips / Ahuja / CKS make Weather & Dust resistant sound

column with Aluminium case & Aluminium mesh grille with foam layer under grill, rotary-

with following specifications (b) With 2 speakers having power handling capacity of

Five Thousand

197 23W(MAX) & 15 W (RMS), each speaker have impedance of respectively 670 ohms/ 15W, Nos 2.00 5,050.00

Fifty Rupees

10W, 2K.ohms / 5W & 4 K. ohms / 2.5W

Supplying and erecting Boss/ Philips / Ahuja / CKS make Weather & Dust resistant ceiling/

wall mounted sound speaker with decorative case & mesh grille with foam layer under

20000 Hz with following specifications (b) With 2 speakers having power handling Five Hundred

capacity of 23W(MAX) & 15 W (RMS), each speaker have impedance of respectively 670 Seventy Five

ohms/ 15W, 1 K.ohms/ 10W, 2K.ohms / 5W & 4 K. ohms / 2.5W Rupees

Gooseneck Condenser Microphone with Base Ahuja Model No. GM-605, GMB-6C or

Eleven Thousand

equivalent in Bosch /Shure etc.

199 Nos 1.00 11,110.00 One Hundred Ten

SPEAKER WIRE Eighty Five

200 Mtr 500.00 85.85 Rupees Eighty

Five Paise

Providing and erecting Inverter based approved make split air-conditioning unit consisting

of condensing unit with variable speed fan motor, inverter type hermetically sealed rotary

compressor with accessories etc. duly connected separately erected evaporating unit and Fifty Six

blower motor with its accessories by means of extra supplied proper insulated copper Thousand Three

201 tubing,drain PVC pipes suitable for ( cost includes Eco Friendly green gas charging and Each 2.00 56,353.96 Hundred Fifty

15A plug top & Remote Control & MS Stand) with necessary core cutting. (1)For ISEER Three Rupees

Range (KWH/KWH)(3.1 to 3.99) (C) for 1.7 to 2 ton capacity - Premium Cat. Ninety Six Paise

Liaisoning work for additional load for requirement, electrical power connection charges Fifty Thousand

202 and inspector approval for power(to be paid to concern electrical power supplier Lot 1.00 50,500.00 Five Hundred

company) Rupees

Conventional type Smoke detector having following specifications : Dual LED’s for

visibility. Advanced detection and communication protocol. Easy installation and

maintenance.

Sleek low -profile housing design.Regular 100mm Base. EN-54 Standard. Operating

Voltage : 10 ~ 28V DC. O O Operating Temperature : 0 C to 37.8 C. Relative Humidity : 10% One Thousand

to 90% One Hundred

203 Reset Voltage : less than 1V. Stand by Current : 85 Micro Amps. Start Up Time : 30 Nos 18.00 1,146.35

Forty Six Rupees

Seconds. Thirty Five Paise

Cycle time : 28 - 35 Seconds. Alarm Current : 60 mA (Max.). Remote Output : 15mA

maximum open collector. Smoke Sensitivity : 0.10 to 0.16 dB/m. Thermal Rating :

C(135 F). complete with Junction box RAVEL make cat no. RE326 2SL

Conventional type Fire Alarm Panel having Following specifications : CE Approved. 16 X

Dot Matrix LCD Display. Standby battery backup with built in charging. Switch Mode

Power Supply. Tactile eypad for easy panel operation. System ON indication. Low Battery

visual warning with audible ton. Fire / Fault status in unambiguous colored LED

indication. 2 programmable relays for fire,supervisory and fault. All zones accept smoke

detectors and any normally open contact device. Any Zone can be configured as alarm or

supervisory. Zone wise isolation and one man walk test facility. Programmable Aux Nine Thousand

Outputs. Lamp test & Drill test facility. 100 All Events log with RTC. Date / Time / Password Five Hundred

204 configuration. Programmable auto silence facility. Zone wise sounder / contact optional). Nos 1.00 9,595.00

Ninety Five

TCP-IP / GSM facility (optional). 120 / 230VAC + 10% -15%, 60 / 50 Hz, 50W Operating Rupees

Temperature 0 – 49° C / 32 – 120° F. Storage Temperature 0 – 60° C Relative Humidity

± 2% RH (non-condensing) at 32 ± 2° C / 90 ± 3° F Charging voltage Charging current 28 V

± 5% 350mA (max) - RAVEL Make cat no. RE-102R

SITC of Hooter / Sounder as per following specifications : Operating Voltage : 24V DC

Operating Current : 40mA Sound Level : 85dB@1m Operating Temperature : 0 – 49° C /

Nine Hundred

32-120° F. Sounder Type : Piezo Electric Type Tone Type : Fire Engine Siren Material : ABS

Forty Nine

205 Plastic Colour : Red Dimensions : 96 H mm X 76 L mm X 28 D mm Back Box : 95 H mm X 75 Nos 3.00 949.40

Rupees Forty

L mm X 58 D mm Mounting Type : Surface / Flush Mount complete with Back Box - RAVEL

make cat no. RE24CS

SITC of Manual Call Point as per following Specifications : Operating Voltage : 24VDC

Operating Current : 30mA Colour : Green / Yellow / Red Material : Plastic IP Rating : IP-50 Eight Hundred

Size : 86 X 86 X 50 mm - RAVEL make Cat no. RE716 MR Eight Rupees

Supplying, Installation, Testing and commissioning of Jockey Pump 10.8M3/hour @70M

One Hundred

Head.Horizontal Centrifugal End Suction. with M.S.fabricated common base plate,

coupling, coupling guard, foundation bolts etc. for motor and details pump specificaion

207 No. 1.00 119,041.95 Thousand Forty

follow as per specification as mentioned in tender volume..

One Rupees

Ninety Four Paise

Supplying, installation, testing and commissioning of electric driven Monoblock Fire pump

960LPM at 70 m head 2900 RPM pump. suitable for automatic operation and consisting Two Hundred

of following: complete in all respect as required. With Suitable HP, SQ cage induction Fifty Two

208 motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz. AC with IP 55 Set 1.00 252,399.00 Thousand Three

protection for enclosure, horizontal foot mounted type with class 'F' insulation, Hundred Ninety

conforming to IS: 325. Nine Rupees

Diesel Operated pump 70m head, 2900 RMP with day tank & battery set complete with Five Hundred

100 ltr diesel Fifty Five

209 SEt 1.00 555,002.07 Thousand Two

Rupees Seven

Tender Rate

Sr. Qty. May

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Less Rate In Figure Rate In Words

Control Panel for the operation of Jockey pump, Fire pump Electric and Fire pump Diesel

with automation

Ninety Four

Thousand Nine

210 SEt 1.00 94,990.50 Hundred Ninety

Rupees Fifty

Providing, fixing, testing & commissioning of Pressure Switches for automation of fire

Two Thousand

pumps. Pressure switches shall be double pole single throw type suitable for 3 phase

Four Hundred

211 supply with diaphragm. Aluminum Enclosure with IP 66 protection follow as per Nos. 3.00 2,400.47

Rupees Forty Six

specification as mentioned in tender volume..

Supplying, Installation, Testing and commissioning of C.I.Butterfly valve conforming to

I.S:13095 class PN 16 rating with Fittings, Flanges, Nutbolts, Washers, Gaskets etc. follow

as per specification as mentioned in tender volume.. Ten Thousand

212 of size: 150mm dia. Nos. 2.00 10,090.94 Ninety Rupees

Ninety Four Paise

Supplying, Installation, Testing and commissioning of C.I.Butterfly valve conforming to Six Thousand

I.S:13095 class PN 16 rating with Fittings, Flanges, Nutbolts, Washers, Gaskets etc. follow One Hundred

213 as per specification as mentioned in tender volume.. Nos. 2.00 6,107.98 Seven Rupees

of size: 100mm dia. Ninety Eight

Supplying, Installation, Testing and commissioning of C.I.Ball type Foot valve conforming

to I.S:13095 class PN 16rating with Fittings, Flanges, Nutbolts, Washers, Gaskets etc.

Thousand Five

follow as per specification as mentioned in tender volume..

Hundred Thirty

214 of size: 150mm dia. Nos. 2.00 18,533.30

Three Rupees

Twenty Nine

Providing, fixing, testing and commissioning of C.I. Dual plate type Non-Return Valve class

PN 16 rating with fittings, flanges, nutbolts, washers, gaskets etc.of sizes: 150mm dia Eleven Thousand

Rupees Nineteen

Providing, fixing, testing and commissioning of Above Ground MS. ERW Black C Class

Heavyduty pipes as per IS: 1239 (upto 150 mm dia.) and IS: 3589 (upto 200 mm dia. And Two Thousand

above) including cutting, screwing, welding etc. and providing all fittings like flanges, Three Hundred

216 bends, tees, elbows, reducers, clamps, hangers etc. with painting of one coat of primer Meter 35.00 2,391.95 Ninety One

and 2 or more coats of synthetic enamel paint of approved make / shade complete as per Rupees Ninety

specification. 150mm dia Four Paise

Providing, fixing, testing and commissioning of Above Ground MS. ERW Black C Class

Heavyduty pipes as per IS: 1239 (upto 150 mm dia.) and IS: 3589 (upto 200 mm dia. And One Thousand

above) including cutting, screwing, welding etc. and providing all fittings like flanges, Seven Hundred

217 bends, tees, elbows, reducers, clamps, hangers etc. with painting of one coat of primer Meter 15.00 1,744.20 Forty Four

and 2 or more coats of synthetic enamel paint of approved make / shade complete as per Rupees Nineteen

specification. 100mm dia. Paise

Providing, fixing, testing and commissioning of Under Ground M.S. ERW Black C Class

Three Thousand

Heavyduty pipes as per IS: 1239 (upto 150 mm dia.) and IS: 3589 (upto 200 mm dia. And

Two Hundred

above) with IWL/pypecoat, 4mm thickness wrapping and coating and providing all fittings

218 Meter 10.00 3,265.73 Sixty Five Rupees

like flanges, tees, elbow, fasteners with all follow as per specification as mentioned in

Seventy Three

tender volume.. 150mm dia

Supplying,fixing,testing & commissioning of Above ground

M.S. "C" Class (Heavy grade) ERW Pipe confirming to IS:1239 complete with all fittings

Three Hundred

(butt welded) such as elbow, socket, tees, unions, flanges with hot deep galvanized nut &

Sixty Three

219 bolt , reducer, clamps & plug etc.with welding,threading,jointing. And Excluding cutting Mtr 80.00 363.56

Rupees Fifty Six

holes in wall

/slab and making good of the same. The pipe & fittings shall have One coat of primer and

two coats of fire red / PO red 25 mm dia.

Supplying,fixing,testing & commissioning of Above ground

M.S. "C" Class (Heavy grade) ERW Pipe confirming to IS:1239 complete with all fittings

(butt welded) such as elbow, socket, tees, unions, flanges with hot deep galvanized nut & Four Hundred

220 bolt , reducer, clamps & plug etc.with welding,threading,jointing. And Excluding cutting Mtr 40.00 459.50 Fifty Nine Rupees

holes in wall Fifty Paise

/slab and making good of the same. The pipe & fittings shall have One coat of primer and

two coats of fire red / PO red 32 mm dia.

Supplying,fixing,testing & commissioning of Above ground

M.S. "C" Class (Heavy grade) ERW Pipe confirming to IS:1239 complete with all fittings

Five Hundred

(butt welded) such as elbow, socket, tees, unions, flanges with hot deep galvanized nut &

Seventy Five

221 bolt , reducer, clamps & plug etc.with welding,threading,jointing. And Excluding cutting Mtr 25.00 575.64

Rupees Sixty

holes in wall

Four Paise

/slab and making good of the same. The pipe & fittings shall have One coat of primer and

two coats of fire red / PO red 40 mm dia.

Supplying,fixing,testing & commissioning of Above ground

M.S. "C" Class (Heavy grade) ERW Pipe confirming to IS:1239 complete with all fittings

Seven Hundred

(butt welded) such as elbow, socket, tees, unions, flanges with hot deep galvanized nut &

Ninety Seven

222 bolt , reducer, clamps & plug etc.with welding,threading,jointing. And Excluding cutting Mtr 15.00 797.82

Rupees Eighty

holes in wall

/slab and making good of the same. The pipe & fittings shall have One coat of primer and

two coats of fire red / PO red 50 mm dia

Tender Rate

Sr. Qty. May

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Less Rate In Figure Rate In Words

Supplying,fixing,testing & commissioning of Above ground

M.S. "C" Class (Heavy grade) ERW Pipe confirming to IS:1239 complete with all fittings

Nine Hundred

(butt welded) such as elbow, socket, tees, unions, flanges with hot deep galvanized nut &

Forty Nine

223 bolt , reducer, clamps & plug etc.with welding,threading,jointing. And Excluding cutting Mtr 15.00 949.31

Rupees Thirty

holes in wall

/slab and making good of the same. The pipe & fittings shall have One coat of primer and

two coats of fire red / PO red 65 mm dia

Supplying,fixing,testing & commissioning of Above ground

M.S. "C" Class (Heavy grade) ERW Pipe confirming to IS:1239 complete with all fittings One Thousand

(butt welded) such as elbow, socket, tees, unions, flanges with hot deep galvanized nut & Two Hundred

224 bolt , reducer, clamps & plug etc.with welding,threading,jointing. And Excluding cutting Mtr 30.00 1,201.78 One Rupees

holes in wall Seventy Seven

/slab and making good of the same. The pipe & fittings shall have One coat of primer and Paise

two coats of fire red / PO red 80 mm dia.

Providing fixing testing and commissioning of GUN METAL 15 mm size quartzoid bulb type

Three Hundred

sprinklers, set to operate at 57 degree Centigrade. Pendent type type with required

Ninety Nine

225 accessories complete. (GUN METAL) Nos. 85.00 399.96

Rupees Ninety

Supplying , installation, Testing & commsioning of Flexible Drop 1000mm

One Thousand

Five Hundred

Fourteen Rupees

Eighty Four Paise

Providing, fixing, testing and commissioning of RRL Fire delivery hose 63 mm Dia in 15 Six Thousand

mtrs length with ISI MARKS is 636 type ‘A’ Fitted with Stainless Steel male & female Five Hundred

227 coupling ISI Mark IS :903 duly binned with copper wire winding follow as per specification Nos. 4.00 6,502.28 Two Rupees

as mentioned in tender volume.. Twenty Seven

Supply installation ,Testing & commissioning of single headed oblique pattern ISI hydrant

landing valve with 80 mm dia flanged inlet & 63 mm dia instantaneous type female outlet Seven Thousand

complete with PVC cap and chain, twist release type lugs WITH all accessories as per SI Six Hundred Fifty

Standard Conforming to IS-5290. (SS 304- Body SS-304 Coupling) Rupees Seventy

Five Paise

Providing, fixing, testing and commissioning of weatherproof standard fire Hose Cabinet

Six Thousand

wall mounting type 18 Gauge. (750 x 600 x 250) having Double Opening with M.S.

One Hundred

fabricated stand, necessary lock & key arrangement follow as per specification as

229 Nos. 2.00 6,189.79 Eighty Nine

mentioned in tender volume..

Rupees Seventy

Eight Paise

Supply installation ,Testing & commissioning of SS Fire Brigade connection consisting of

2WAY. 63 mm instantaneous type male coupling with 125 mm Dia. flanged outlet Seven Thousand

complete for fire water tank. Six Hundred Fifty

Rupees Seventy

Five Paise

Supply installation ,Testing & commissioning of SS Fire Brigade connection consisting of

4WAY. 63 mm instantaneous type male coupling with 125 mm Dia. flanged outlet Eleven Thousand

complete for fire water tank. Seven Hundred

231 No. 1.00 11,731.15 Thirty One

Rupees Fifteen

Providing, fixing, testing and commissioning of Wall mounting Fix type First aid Fire Hose

Ten Thousand

Reel with 30 Mtrs Rubber Hose 25mm Dia IS : 444 Type II fitted wit SS Shutt off Nozzle

Eight Hundred

follow as per specification as mentioned in tender volume..

232 Nos. 2.00 10,877.20 Seventy Seven

Rupees Nineteen

Supply installation , testing & commissioning of ISI Standard SS-304 branch pipe with

nozzle of 20mm nominal bore outlet as per IS:903 suitable to fit with standard

Four Thousand

instanteneous type 63mm dia coupling (SS-304)

One Hundred

233 Nos. 2.00 4,182.41 Eighty Two

Rupees Forty

Supply installation testing & Commissioning of 25 MM dia Air Realese valve complete in

Two Thousand

all respects. (GUN METAL)

Two Hundred

234 Nos. 2.00 2,294.72 Ninety Four

Rupees Seventy

Supply installation testing & Commissioning of Pressure guage 4" dial 0 to 16 kg/cm2 with

syphon and cock complete in all respects (SS-304). Two Thousand

Three Hundred

235 Nos. 2.00 2,397.24 Ninety Seven

Rupees Twenty

Three Paise

Supply installation testing & Commissioning of 25 MM dia Ball Valve (SS-304) complete Nine Hundred

with SS Ball with single handed lever complete in all respects. Sixty Nine

Rupees Nine

Providing & Installation of ABC Stored Pressure Type Fire Extinguisher 6 Kgs. capacity

Two Thousand

bearing ISI Mark for Fighting ABC Class of Fire. The Extinguisher will be Manufactured

Three Hundred

Strictly as per BIS: 15683:2006 bearing ISI. Mark follow as per specification as mentioned

237 Nos. 5.00 2,355.72 Fifty Five Rupees

in tender volume..

Seventy Two

Tender Rate

Sr. Qty. May

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Less Rate In Figure Rate In Words

Providing & fixing of Co2 type Fire Extinguisher 4.5Kgs. Capacity, made from the brand

Five Thousand

new seamless cylinder, as per IS: 7285 and CCE approval, fitted with a Discharge hose and

Four Hundred

238 horn and wheel type valve with initial Charge as per IS: 15683:2006 specification, bearing Nos. 5.00 5,456.63

Fifty Six Rupees

ISI Mark follow as per specification as mentioned in tender volume..

Sixty Two Paise

Providing & fixing Modular type ABC Dry Powder Fire extinguishers 5 litre capacity Fire Four Thousand

Extinguishers. The Extinguisher will be Manufactured Strictly as per BIS: 15683:2006 Four Hundred

239 bearing ISI. Mark follow as per specification as mentioned in tender volume.. Nos. 5.00 4,447.03 Forty Seven

Rupees Three

Providing, fixing, testing and commissioning of On -Off Switch follow as per specification

Four Hundred

as mentioned in tender volume..

240 Nos. 3.00 408.65 Eight Rupees

Sixty Four Paise

Providing, fixing, testing and commissioning of below Auto Glow Signages follow as per Two Hundred

specification as mentioned in tender volume.. Emergency Exit 4” X 12” Thirty Three

Rupees Sixteen

APPROVAL FIRE SYSTEM FROM LOCAL FIRE AUTHORITY

Getting of Fire Fighting System Approval from local fire authority with all other charges Thirty Thousand

242 and documentations for getting No Objection Certificate.(as per GMB Approved rate) Job. 1.00 30,300.00 Three Hundred

Providing & fixing laminate finish partition up to false ceiling ht (thickness of partition is

82 mm or as specified in drawing) having 12 mm thick marina plywood IS 710 grade both

side on aluminum framing of gauge 16. Aluminum framing size for vertical & horizontal

support is 50 mm x 25 mm. Grid of aluminum framing is 600 mm x 600 mm. All

exposed surfaces finished with 1 mm thick Laminate of approved shade complete with

mat finish. Necessary framing to be erected above false ceiling. No extra cost to be paid

for the same. Before installation, make hole/face plate for conduit pipes of electrical /

networking cables with open able stud from partition Including all materials and labor

Six Thousand Six

etc. Make necessary grooves as per shown in drawing. Using of 12 mm thick clear glass

Hundred Twenty

243 with proper crystal edges & with suggested frosted films on glass. All joints are covered Sqm 4.00 6,620.55

Rupees Fifty Five

with teakwood beading Patti finished with polish matching with laminate. Including door

of same design if required Complete with all necessary hardware & adhesives as per

details given in drawing and as per instructions of Architect/consultant/Engineer In

charge. Contractor has to provide all necessary cut outs (race ways.) for Electrical works &

no extra payment shall be made for it.

Providing and fixing eco-friendly light weight calcium silicate false ceiling tiles having

Tegular edge & 15 mm Thick Densified edges on the Tile Periphery for Extra Strength The

Light weight calcium silicate ceiling tiles shall have , light reflection 85% noncombustible

as per B.S. 476 part IV, 100% humidity resistance and also having thermal

conductivity0.043° w/m KC.for the best thermal Insulation . The Light weight calcium

Silicate tile shall be of approved texture Fine fissured/ Spintone/Cosmos having NRC value

of 0.5 & Globe having NRC value of 0.75 NRC or equivalent of size 595 X 595 mm to be laid

on true horizontal level suspended inter locking metal grid of hot dipped galvanized steel

One Thousand

sections (galvanizing @120 grams per sqm at joints to get required length and size of

Six Hundred

24X38mm made from 0.30 mm thick (minimum) sheet, 1200mm centre to centre, and

244 centre to centre to form agrid of 1200X600mm and secondary thick (Minimum) sheet to Sqm 66.00 1,674.15 Seventy Four

Rupees Fourteen

be interlocked at middle of the 1200X600mm panel to form grid of size 600X600mm

resting on periphery walls/partitions on a perimeter wall angle pre-coated steel of size

(24X24X3000mm made of 0.40mm thick (minimum) sheet with the help of rawl plugs at

450mm centre to centre with 25mm long dry wall screws @ 230mm interval and laying

15mm thick Densified edges light weight calcium silicate ceiling tiles of approved texture

(Fine Fissured/Cosmos/Spintone) in the grid

Providing & fixing work station / table having ht of 750 mm Top, with MS Pipe Structure

and Back and side Ply of table is also made up of 19mm Thick. Top of Table is 19mm thk

ply with laminate Finish Per Requirement and All internal & external Joints finished with

Twenty Four

teakwood beading Patti. Common or front Part of Table is Sectationized with MS

Thousand Eight

Perforated Sheet. All exposed and internal surfaces covered with Laminate Finish of

245 approved shade & Complete as per detail drawings & as instructed by Sqm 42.00 24,870.53 Hundred Seventy

Rupees Fifty

Architect/consultant/ Engineer In charge. Complete with all necessary hardware like nails,

Three Paise

ss screws, table chain, Key board trey, TDS channel, adhesives etc. Contractor has to

provide all necessary cut outs for Electrical works & no extra payment shall be made for

Providing & fixing office table / staff table having ht of 750 mm Top, with 19mm thk

and side Ply of table is also made up of 19mm Thick. Top of Table is 19mm thk ply with

laminate Finish Per Requirement and All internal & external Joints finished with teakwood

beading Patti. Item includes fixing of drawers and keyboard tray and storage with Twenty Nine

shutters under table as per drawing. With grooves shown as per drawing. All exposed and Thousand Three

246 internal surfaces covered with Laminate Finish of approved shade & Complete as per Sqm 8.00 29,350.96 Hundred Fifty

detail drawings & as instructed by Architect/consultant/ Engineer In charge. Complete Rupees Ninety

with all necessary hardware like nails, ss screws, table chain, TDS channel, adhesives etc. Five Paise

Contractor has to provide all necessary cut outs for Electrical works & no extra payment

shall be made for it. All ply should follow IS

Tender Rate

Sr. Qty. May

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Less Rate In Figure Rate In Words

Open Storage Rack (Laminate FINISH)

Providing & fixing Any ht storage having depth of 350mm/450mm/600 mm, having

skirting of 75 mm, including vertical supports & horizontal shelves shown as per drawing

made by 19 mm thick Marin ply, Open Front Side for Selves with using 12 mm thick Marin

ply for framing. All complete with proper teakwood beading and Teakwood molding as Ten Thousand

per design. Back ply is 12 mm Marin ply. All exposed are covered with 1 mm thick Three Hundred

247 Laminate & internal surfaces are covered with 1 mm thick laminate. External & internal Sqm 60.00 10,381.62 Eighty One

joints covered with beading Patti complete with polish finish. With grooves shown as per Rupees Sixty One

drawing. All complete with proper hardware like, S.S. Screws, MS Nails, Magnets, cable Paise

manager SS 304 etc. All Details as per shown in detail drawings & as per instructions of

architect/consultant / in charge engineer

Storage with Shutter (Laminate FINISH)

Providing & fixing Any Height storage having Any size of having depth of

350mm/450mm/600 mm, having skirting of 75 mm, with proper locks. includinf of

vertical supports & horizontal shelves shown as per drawing made by 19 mm thick Marin

ply, having shutters of 19 mm thick ply or Clear Glass with using 12 mm thick Marin ply

for framing. All complete with proper teakwood beading. and Teakwood molding as per Thirteen

design. Back ply is 12 mm Marin ply. All exposed are covered with 1 mm thick Laminate & Thousand Eight

248 internal surfaces are covered with 1 mm thick laminate. External & internal joints covered Sqm 41.00 13,815.77 Hundred Fifteen

with beading Patti complete with Polish finish. With grooves shown as per drawing All Rupees Seventy

complete with proper hardware like locks, S.S. Screws, MS Nails, Magnets, table chains, Six Paise

cable manager SS 304 Handles of 250 mm and 100 mm dia etc. All Details as per shown

in detail drawings & as per instructions of architect/consultant / in charge engineer

Notice Board / Pin Board

Seven Thousand

Supplying of Notice Board of 3'x 3' (or as specified) with all Fixing Arrangement complete

Two Hundred

as per drawing and Directed by Engineer In Charge etc complete.

249 Nos 4.00 7,259.38 Fifty Nine Rupees

Thirty Seven

Providing and fixing News paper stand size 650 x 820 x 1200 or required height made out

of 18 mm wtr.prf. [MR Grade] ply with 1 mm. thk inner laminate for top including back

panel with shelves for magazine and news paper as shown in drawing, all expose joints

Thousand Forty

250 finish with teakwood beadsing patti with polish finish and provision of openable top for Nos 2.00 13,044.62

Four Rupees

news paper storage complete as per detailed drawings and Engineer-In Charge and

Sixty One Paise

Supplying and providing reading chairs with PP arms with soft PU pads, Seat and back

upholstered with cushioned and MS powder coated frame and cantilever legs. Overall

dimension 590 L x 600 W x 915 H (Or as specified) complete as directed by architect and Six Thousand

product as per given specification. Complete as per architectural design and concept and Sixty Rupees

approved by Architect & Client.

Supplying and providing High Back Mesh office Chair As per specification below:

-Metal frame seat made of Mesh fabric upholstery (foam base)

-Adjustable Head rest

-Fixed Arm rest

Ten Thousand

-Knee tilt mechanism

Seven Hundred

252 -360 swivel motion/ 100mm stroke gas Nos 1.00 10,738.07

Thirty Eight

-Nylon Star base

Rupees Six Paise

-Pushback mechanism & Comfy seating.

-Complete as per architectural design and concept and approved by Architect & Client.

Supplying and providing Mid Back Mesh office Chair As per specification below:

-Metal frame seat made of Mesh fabric upholstery (foam base)

-Center tilt mechanism

Five Thousand

-100mm class 4 gas lift

Twenty Four

253 -PP Fixed Arm rest Nos 8.00 5,024.65

Rupees Sixty

-Nylon Star base/Twin wheel nylons casters

Four Paise

-Complete as per architectural design and concept and approved by Architect & Client.

Supplying and providing dust bin made of 100% virgin plastic with paddle. Capacity-10 to Five Hundred

15 Ltr. Fifty Seven

Rupees Fifty Two

Supplying and providing dust bin made of 100% virgin plastic with paddle. Capacity-120 L One Thousand

Five Hundred

255 Nos 3.00 1,568.03 Sixty Eight

Rupees Two

Blinds : Providing and fixing as per approved make manual roller blinds with Soltis fabric

& spring drive system with steel ball chain/one touch with speed control action roller

blind with end brackets with head ail, components, bottom bar.Color-Alu with manual

operation and warranty etc as per manufacturer’s specifications. Fabric to be as per

approved sample. All the work complete as per the detailed drawing and instruction of

Architect/EIC. Soltis-99-Color-Alu fabric: 39% Polyester/61% PVC with Aluminum Backing.

Weight:290 g/sqm, Thickness:0.32 mm, Openness Factor:3%, Visible Light Transmission One Thousand

(N-N): 2%-4%, Solar reflection (white) 65%, Internal Solar Factor (gtot): 0.35 - 0.48, Tensile Nine Hundred

256 Strength (Warp/Weft):160/170daN/5cm,Tearing Strength(Warp/Weft):11/13daN, Fungi Sqm 115.00 1,962.94 Sixty Two Rupees

static Treatment: Degree 0, Excellent (EN ISO 846-A) Fire Retardancy:B-s2,d0/EN 13501-1. Ninety Three

All complete as per approval of designer & instruction of Project Manager. (The mode of Paise

Measurement: The size of the blind will be measured from end to end bracket (Left to

Right bracket) & height will be measured from top of the pelmet till the bottom of the

bottom bar

Tender Rate

Sr. Qty. May

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Less Rate In Figure Rate In Words

Providing and fixing Godess Saraswati idol (Material- Fibre) 5 ft tall, with proportionately One Hundred

base dimenstion as per approved design by client and complete as per instruction of Fifty Thousand

257 engineer-in charge and consultant. Nos 1.00 150,995.00 Nine Hundred

Ninety Five

Providing and fixing Wall art/Photoframes of size 2ftx2ft with wooden frame of size 2in x

Two Thousand

1in consisting 6mm thick ply in back with digital vinyl printing and 5mm thick glass on top

Four Hundred

if required.

258 Nos 30.00 2,497.23 Ninety Seven

Rupees Twenty

Providing & fixing 75' UHD 4K Smart LED TV, Screen Resolution 3840 x 2160 pixels with One Hundred

259 architect. Nos 0.00 102,067.57 Sixty Seven

Rupees Fifty

Seven Paise

Providing and fixing PCs with configuration of Core I5 12th Gen, 8Gb RAM DDR4, 256 GB

SSD +1TB HDD, WIN.11 HOME MS OFFICE 2021 STUDENT, Full HD display of 21 to 23.8' Fifty Nine

with keyboard and mouse. Thousand Seven

260 Nos 7.00 59,748.35 Hundred Forty

Eight Rupees

Thirty Four Paise

Providing and fixing Automatic Duplex laser printer with 30 pages per minute print speed,

Fifteen Thousand

8 mb memory, Large 250 sheet paper tray with USB connectivity.

One Hundred

261 Nos 1.00 15,157.58 Fifty Seven

Rupees Fifty

Seven Paise

Supplying and providing xerox machine- -20PPM Copy / Print /Color Scan / Duplex DADF Fifty Eight

/Single Thousand

Tray Seventy Five

Providing and fixing Directional and Informative Signages- SS Plate, Grade 304, Brush

Ninety Two

finish, 2mm Thickness with smoothen corner edges, Acid etching with duco color, SS

Thousand Four

studs 1.5' away from wall.fitting as per dirction of Architect and EIC

263 Sqm 1.50 92,433.18 Hundred Thirty

Three Rupees

Eighteen Paise

Providing and Fixing Library Name in Gujarati Letter SS304 1mm thick letter 1.5" depth

10" Height with Duco color & fitting as per direction of Architect & EIC.

Thousand Five

Hundred Twenty

Total Amount Rs. =

Total Amount Rs. =

I/We am/are willing to carry out the work @............ % above/below percent ( should be written in figures & Words) of the

estimated rates mentoined above . Amount of my/our tender work out as under .

Estimated amount put to tender Estimated amount put to tender

Deduct:……………………...….% below Add……………………..……..% above Rs…………………..………………………

IN words IN words

(Please strike out whichever is not applicable.)

The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for

1 which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C

4 Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost of difference of

cement consumption have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.

Tender Rate

Sr. Qty. May

Description of Item Unit Total Amount

Description of Item Unit Total Amount

No. More Or Less Rate In Figure Rate In Words

Signature of Contractor with Seal Signature of Contracting Authority with Seal