Special repair to Streetlight and related items in RB and New Parade Ground, Baffle Range, Barrack (G+3), Gurudatt building and Main Road at SRPTC, Chowky, Dist:- Junagadh

No. In Figure In Words

1 Providing & Erecting 2.0 mtr. long Earthing system by making minimum 4.00 Each 7025.00 Rupees Seven

bore of 225 mm dia. in soft soil. Suitable for doing pipe-in-pipe Thousand Twenty Five

technology earthing. Earthing electric rod must be made from Corrosion Only

free hot dip galvanizing pipes having following specification.

(A) Earthing Electrode: outer Pipe: - 88 mm minimum O.D., 'B ' Class

ISI mark of Reputed Brand, Inner pipe: - 42 mm minimum O.D., Pipe B

Class ISI mark reputed Brand. Terminal Size: 70 mm X 100 mm length,

Terminal should be made from inner pipe for that pipe must be pressed

and gave rectangular shape so its work as a terminal. The hot deep

galvanising must be done after above process. Galvanised thickness

must be minimum 75 micron anywhere. SS Nut bolt:- 2 nos. with

washer suitable for 14 mm dia. hole must be provided at terminal. Total

minimum Weight (approx.) of earth electrode with inside conductive

material be 26 kg.

(B) Inner chemical (CCM Compound):- Resistivity:- 0.2 ohm/ meter

testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry

form, Sulphur content:- <2%

(C) Back fill Compound:- Earthing compound should be capable to

retain moisture for long time. Back Filling Compound weight is 25 Kg.

(D) Chamber and cover:- Earthing chamber should be size of 400 mm

X 400 mm X 400 mm depth and Cover should be heavy duty cast iron

with required size of 300 mm X 300 mm X 4 mm thick.

It. Estimate Quoted Rate in Rs.

Description of Item Qty Unit Amount

No. In Figure In Words

Necessary test report must be submitted.

1. Short circuit test by ERDA/ CPRI for 25KA

2. Resistivity test of conducting material from NABL accredited lab.

3. Hot dip galvanised / zinc coating micro test from reputed laboratory.

4. General test report from OEM regarding specification of earthing.

[Make and model approved by EIC Strictly subject to item specification

only] [OEM has to submit all detail & sample for approved before

supplying]

[Water must be poured in bore before starting earthing. Earthing value

must be measured with earth tester. Agency has to bring the earth

resistance to at least 02 ohms & voltage between neutral & Earthing

upto 02 volt. Agency has to maintain earthing & its value for one year.

Earthing must be done in the presence of A.E. (GSPHCL)]

2 For Earthing Additional charges for boring in hard rock soil (by 4.00 Each 276.00 Rupees Two Hundred

Breaker)& filling soft soil in earth pit. (Certificate for soil have to given Seventy Six Only

by DEE/AE along with Photographs)

3 Providing & fixing double compressed heavy duty flange type brass 150.00 Each 43.00 Rupees Fourty Three

cable gland with rubber ring for P V C insulated armoured cable Only

complete with outgoing tails, insulating tape etc. For following size

cables.. For 2 to 4 core x 4.0 Sq. mm (Sigma, MCI, Comet Make

4 Supplying & erecting 12 mm thick Hylum sheet on existing 25 x 25 x 3 2.00 Sq. 2289.00 Rupees Two

mm red oxide painted angle iron frame suitable for fixing ICDP / ICTP / Mtr. Thousand Two

DPMCB / FPMCB SWITCH and energy meter (contractor shall make Hundred Eighty Nine

approved drawing of Hylum sheet to arrange required No. of Energy Only

meter & ICDP / ICTP / DPMCB / FPMCB switch-busbar etc. as per

Actual space available in electrical room at site)

It. Estimate Quoted Rate in Rs.

Description of Item Qty Unit Amount

No. In Figure In Words

5 Providing & Erecting Mains with ISI marked, 1.1 KV grade electrolyte 300.00 Mtr 141.00 Rupees One Hundred

multi stranded, annealed copper conductor with heat resistant PVC Fourty One Only

insulated conforms to IS:694, IEC - 227 erected in existing pipe of

following size (Specifically for control panel, relays, power switchgears,

motor starters & control wiring) with required size of copper lugs, nuts

and bolts if required. (Conductor resistance should be as per

IS:8130/1984) One wire 16.00 sq. mm

6 Providing and erecting bracket consisting of ISI mark "B" class G.I. 34.00 Each 487.00 Rupees Four Hundred

Pipe 4.2 cm outside diameter complete with suitable G.I. Sleeve tubing Eighty Seven Only

of 2 mm. thick and required size and length suitable for 76.5 / 80 mm.

required size of pole top having nuts and bolts for fixing the brackets

and having spread of Upto 0.70 mtr. length with suitable rise as per

site condition and suitable welded stiffner reducer and nipple with

check nut complete painted with one coat of red oxide and two coats of

alluminium paint. or Single arm bracket suitable for terrace as per

design given by EIC (Jindal / Asian / Tata / Surya Prakash make Only)

(FabricatoRupees - Ambica / Fab / Bajaj / Impression equipment Only)

(Test certificate to be submitted) (a) For Single arm bracket

7A Providing and erecting bracket consisting of ISI mark "B" class G.I. 25.00 Each 608.00 Rupees Six Hundred

Pipe 4.2 cm outside diameter complete with suitable G.I. Sleeve tubing Eight Only

of 2 mm. thick and required size and length suitable for 76.5 / 80 mm.

required size of pole top having nuts and bolts for fixing the brackets

and having spread of 1.00 mtr. length with suitable rise as per site

condition and suitable welded stiffner reducer and nipple with check nut

complete painted with one coat of red oxide and two coats of

alluminium paint. or Single arm bracket suitable for terrace as per

design given by EIC (Jindal / Asian / Tata / Surya Prakash make Only)

(FabricatoRupees - Ambica / Fab / Bajaj / Impression equipment Only)

(Test certificate to be submitted) (a) For Single arm bracket

It. Estimate Quoted Rate in Rs.

Description of Item Qty Unit Amount

No. In Figure In Words

7B For Double arm bracket 19.00 Each 821.00 Rupees Eight Hundred

Twenty One Only

8 Supplying following size of Light duty “A” Class G.I . Pipe & erecting 130.00 Mtr. 171.00 Rupees One Hundred

as directed by Engineer-in-charge. (a) For 25 mm dia Seventy One Only

9 Supplying & erecting approved make SMC press moulded 70.00 No 890.00 Rupees Eight Hundred

composite FRP loop-in, loop-out approx. 2mm thick box complete with Ninety Only

Bakelite connector strip 5way(3P+N+E),DIN rail for mounting mob &

hinged doors as per requirement having locking arrangements with

mounting clamp with nuts, bolts & washers suitable for erection on pole

with cable clamps& earth bolt of following size of box. (A) 300 mm x

200 mm x 100 mm [deep]

10 Providing & making 1:2:4 cement concrete foundation & 70 % 5.00 Each 801.00 Rupees Eight Hundred

PCC from bottom including excavation for the pole of size 45 x 45 x One Only

100 cm. Deep in below ground level with plinth of 45 cm x 45 cm (or

cm dia x 45 cm) high upper ground level with necessary curing and

finishing in approved manner.

( for 4 & 6 mtr pole)

11 Breaking existing C.C. Foundation upto 0.5 mtr level and make the 23.00 Each 950.00 Rupees Nine Hundred

new C.C Foundation as per above item for the same. Fifty Only

12 Providing and making of Coil Type Earthing Having coil Made From 8 63.00 Each 369.00 Rupees Three

SWG Hot Deep Galvanized iron Wired wrapped On 50 MM OD Round Hundred Sixty Nine

Pipe Having Minium 50 Turn( Approximately 200 mm lenght) & Having Only

Contineous lenght Of 3 Mtr Gi wire To Connect Earthing Bolt & Burried

In Specially Prrepared Earth Pit Complete With Salt & Charcoal/Coke

As Required For Coil Type Earthing (Approximately Weight Of Coil

It. Estimate Quoted Rate in Rs.

Description of Item Qty Unit Amount

No. In Figure In Words

13 Drilling the road without breaking the road surface (Asphalt) for 30.00 Mtr. 488.00 Rupees Four Hundred

laying of cable for feeding power supply by making up to following size Eighty Eight Only

of holes at both ends complete. (A) Up to 100 mm bore dia.

14 Providing, erecting, fabricating the M.S. structure as per requirement 150.00 Kg. 75.11 Rupees Seventy Five

of site as per structure design Including proper size approved by EIC and Paisa Eleven

of M.S. angles, flats, bars, square pipe, channels, sections (Tata, Only

Jindal, Asian, JSI Make) complete with cutting, welding, grinding and

finishing duly painted with Asian/Nerolac make premium quality oil paint

and true care red oxide metal primer,asian paint make with erection on

site as per direction of engineer in charge with necessary grouting

cementing, plastering and finishing complete. All hole opening of

square pipe end must be closed with M.S plate welding. Payment will

be done on KG as per Actual weight.

15 Providing & Erecting Flexible PVC insulated multistrand multicore 1.1 450.00 Mtr. 46.00 Rupees Fourty Six

kv grade ISI marked copper wires of following size to be erected as Only

directed. (a) 3 core 1.5 sq.mm. PVC insulated round copper wire ISI

16 Providing & Erecting Flexible PVC insulated multistrand multicore 1.1 260.00 Mtr. 77.00 Rupees Seventy

kv grade ISI marked copper wires of following size to be erected as Seven Only

directed.(b) 3 core 2.5 sq.mm. PVC insulated round copper wire ISI

17 Providing & erecting approved make XLPE (IS:7098) (I)-88 ISI mark 2900.00 Mtr. 361.00 Rupees Three

armoured multistrand Copper Cable 1100 volt to be laid 90 cms. Hundred Sixty One

Under ground or to be laid on wall with 1.0 mm thick G.I. heavy guage Only

cable clamp or in existing DWC pipe underground or road crossing or

floor of following size of cables.(d) For 4 core x 4.0 mm2

It. Estimate Quoted Rate in Rs.

Description of Item Qty Unit Amount

No. In Figure In Words

18 Providing & fixing Solderless crimping type Copper lugs conforming to 1200.00 Each 8.00 Rupees Eight Only

IS suitable for cable of following size evenly crimped with high pressure

tool & connected to switchgear terminals with brass/cadmium plated

nut bolts in an approved manner. (A) 1.5/2.5/4/6 Sq.mm.

19 Providing & laying HDPE Double walled corrugated pipes (DWC) 1850.00 Mtr. 117.00 Rupees One Hundred

(conforming to IS: 16205 (part 24) 2018)) with minimum load required Seventeen Only

of 450N capacity with anti rodent and ultra violet material properties

with necessary connecting accessories of same material at required

depth to be laid 90 cms. under ground for laying of cable below

ground / road surface for enclosing cable and back filling the same to

make ground as per original. (A)For Outer dia.50 mm and Inner dia.

38mm (Test Certificate to be Submitted)

20 Supplying and erecting Galvanized iron pipe post ISI mark 'B' class 11.00 Each 4397.00 Rupees Four

88.9 mm. O.D. 6 mtrs. Long duly painted with two coats of alluminium Thousand Three

paint and metallic base plate of 300 x 300 x 4 mm. thick to be erected Hundred Ninety Seven

as a compound light pole with wire entry nipple and earthing bolt. Only

Approximate weight of pole 47 Kg. within permissible limits as per IS

effective length of sections Bottom: 5.5 mtr. having outside dia.

mm. Top: 0.5 mtrs. having outside dia. 76.1 mm. ( ISI test certificate

from pipe manufacture & Class/make/length/O.D/wall thickness/GI/ MS/

Weight test certificate from pole manufacture shall be submitted)

(Jindal / Asian / Tata / Surya Prakash make only For G.I Pipe)

(Manufacturer's make Ambica,Fab,Bajaj only,Test Certificate to be

Submitted)

It. Estimate Quoted Rate in Rs.

Description of Item Qty Unit Amount

No. In Figure In Words

21 Supplying and erecting approved make Octagonal pole made from HR 20.00 Each 11410.00 Rupees Eleven

sheet steel. The pole should be made as per IS. and shall be coated Thousand Four

with hot dip galvanizing as per IS 2629/2633/4759, suitable suspend Hundred Ten Only

local wind speed with integral Junction box with Hot Deep Galvanised

door having 2 nos. 180° operated hinges & 2 nos. Ln key locking with

silicon rubber gasket. Consist of terminal plate of min 6mm Hylam

sheet, standard profile 35mmX7.5mm Din-Rail & MCB , Brass stud

type terminal and arrangement for cable termination to be erected on

RCC foundation as per details given by manufacturer and EIC

considering site requirement.

Foundation Details: 1) Grade of RCC 1:2:4, 2) Grade of steel

rainforcement of RCC FE 415, 3) Clear cover to rainforcement 50mm,

4)Concrete vibrated, 5) use suttering / farma, 6)Hot deep galvanized

average 70Micron, 7) Detail drawing will be given by corporation.

(Make:- Bajaj, Valmont, Ambica, Transril)

(E) 7 Mtr. Long 70 mm Top X 135 mm bottom dia, 3 mm thickness

with 225mmX225mmX16mm base plate, 4-M20 Bolts and 600mm long

hot deep galvanized J-Bolt, nuts, washers with 1300mm under ground

and 200mm above ground level and 450mm dia. Foundation in 1:2:4

proportion.

22 Painting of Streetlight pole with bracket complete with primer with two 41.00 Each 263.00 Rupees Two Hundred

coats of Aluminium paint for following size of pole.Up to 6 Mtr. Sixty Three Only

23 Providing & erecting 240 V MCB double pole switch for motor & 5.00 Each 327.00 Rupees Three

inductive load (C Curve) having 10 KA breaking capacity & confirms Hundred Twenty

to IS : 8828 in existing box having following capacity (B)For 40 Amp. Seven Only

It. Estimate Quoted Rate in Rs.

Description of Item Qty Unit Amount

No. In Figure In Words

24 Providing and erecting Medium Class FIA approved and ISI mark white 250.00 Mtr. 33.00 Rupees Thirty Three

colour (embossed) RIGID PVC PIPES of following size complete Only

erected with necessary PVC fittings & Junction boxes fixed with

adhesive solution & clamps on / in wall / ceiling along with continuous

fish wire to draw mains with necessary fittings and junction boxes for

following dia. For 25 mm dia.

25 Providing, erecting, testing and commissioning insu intelligent street 3.00 Each 20255.00 Rupees Twenty

light controller specially designed for energy saving in conventional Thousand Two

street light system ( Cat. no. SLC-03-1Ph-15 KVA-20 Amp. per phase) Hundred Fifty Five

having technical specification, 1 phase 2 wire, 230 V AC/ph, +/- 25% R Only

Y B N 2 wire supply system, 50 Hz (+/- 10%) 2 W (Stand BY) to 4 W (at

street light operation) consumption, Advance 8 bit micro controller,

switching on longitude and latitude base, accuracy of +/- 1 minute per

month, with in built battery, with battery life of more than 8 years, with

special device which hold the parameter for more than 10 year without

any power and password protected.

16 characters and two line LCD display with backlight, 4 keys user

friendly keyboard system, 7500/15000 VA feeder pillar capacity, 60/100

Amps isolator, 3 output with termination, 40/63 Amps 2/3 pole

contactor, 3 X 16 Amp., with FR cable provision to by pass by way of

relay operation through auto/manual switch, 2 to 55 centigrade and

humidity 90 % non condensing, Out door type installation on pole with

clamps (Provided with clamps and nut bolt) or wall or floor, Three

locking system flush type internal panel lock, external pad lock and

internal U clamp locking systems for against theft of Panel, having

17/25 Kg weight, 18 Gauge MS weather proof box with industrial

exterior powder coated with 7 tank process RAL

It. Estimate Quoted Rate in Rs.

Description of Item Qty Unit Amount

No. In Figure In Words

26 Providing & Erecting Univesal Astro interlligent Street light Control 2.00 Each 12895.00 Rupees Twelve

Syatem insu with weather proof box for indoor allplication 5KVA ( as Thousand Eight

Per atteched Specification) Hundred Ninety Five

27 SITC of Outdoor aesthetically designed LED Street Light Luminaire 73.00 Each 3512.00 Rupees Three

with total consumption of Max. 45 W with single piece die cast Thousand Five

aluminium housing, high power LED shall be mounted on high quality Hundred Twelve Only

metal core PCB with extremely precison designed heat sink complete

with IP66 protection Class with polycarbonate / thoughened glass cover

the fixture should be suitable for pole/bracket mounting. The fixture to

comply both LM79 and LM 80 guidelines with LED module min.

lumen/watt with toughen Glass L70 at 50,000 hrs, provided with high

quality polycarbonate lenses for better light distribution. The Fixture

Should be able to be Pole Mounted and also bracket mounted,

provided with high quality driver for protection against high and low

Voltage cut Off, opertional for high amibient and high humid

envirnoments, THD of driver should be less than 10% and P.F > 0.95.

Also the Fixture should meet the following technical criterias Oprating

range Voltage 160 to 270 V, system efficiency >= 110 lm/w, and total

lumens not less then 4950, CCT > 5000K, CRI > 65, beam angle

deg, 4kV integral & non integral surge immunity level at least 10 KV

non integral..The Separate Potted driver should have over current, over

voltage protection, short circuit protection so that the fixture recovers

once the fault is removed. In addition to the above product should be

operational in the temperature range of 0 deg to 50 deg and humidity

range of 10% to 90% RH. (Note:- The manufacturer / authorized

Channel partner of the manufacturer has to submit 5yrs free

replcement Guarantee for complete Fixture)

It. Estimate Quoted Rate in Rs.

Description of Item Qty Unit Amount

No. In Figure In Words

28 SITC of Outdoor aesthetically designed LED Street Light Luminaire 13.00 Each 6701.00 Rupees Six Thousand

with total consumption of Max. 120 W with single piece die cast Seven Hundred One

aluminium housing, high power LED shall be mounted on high quality Only

metal core PCB with extremely precison designed heat sink complete

with IP66 protection Class with polycarbonate / thoughened glass cover

the fixture should be suitable for pole/bracket mounting. The fixture to

comply both LM79 and LM 80 guidelines with LED module min.

lumen/watt with toughen Glass L70 at 50,000 hrs, provided with high

quality polycarbonate lenses for better light distribution. The Fixture

Should be able to be Pole Mounted and also bracket mounted,

provided with high quality driver for protection against high and low

Voltage cut Off, opertional for high amibient and high humid

envirnoments, THD of driver should be less than 10% and P.F > 0.95.

Also the Fixture should meet the following technical criterias Oprating

range Voltage 160 to 270 V, system efficiency >= 110 lm/w, and total

lumens not less then 13200, CCT > 5000K, CRI > 65, beam angle

deg, 4kV integral & non integral surge immunity level at least 10 KV

non integral..The Separate Potted driver should have over current, over

voltage protection, short circuit protection so that the fixture recovers

once the fault is removed. In addition to the above product should be

operational in the temperature range of 0 deg to 50 deg and humidity

range of 10% to 90% RH. (Note:- The manufacturer / authorized

Channel partner of the manufacturer has to submit 5yrs free

replcement Guarantee for complete Fixture)

It. Estimate Quoted Rate in Rs.

Description of Item Qty Unit Amount

No. In Figure In Words

29 SITC of Outdoor aesthetically designed LED Flood Light Luminaire 21.00 Each 6228.00 Rupees Six Thousand

with total consumption of maximum 90 W with single piece die cast Two Hundred Twenty

aluminium housing, LED's mounted on high quality metal core based Eight Only

PCB with extremely precison designed heat sink, complete with IP66

protection Class, with polycarbonate / Toughened glass cover. The

fixture should be suitable for pole/bracket mounting. The fixture to

comply both LM79 and LM 80 guidelines with LED minimum

lumen/watt with L70 at 50,000 hrs, provided with high quality

polycarbonate Seperate lenses for better light distribution. The Fixture

Should be able to be Pole Mounted and also bracket mounted,

provided with high quality potted driver for protection against, high and

low Voltage cut Off, opertional for high amibient and high humid

envirnoments, THD of driver should be less than 10% and P.F > 0.95.

Also the Fixture should meet the following technical criterias. Operating

range Voltage 160 to 270V, system efficiency > 110 lm/w, CCT >

5000K, CRI >65, beam angle 120 deg, 4kV integral & non integral

surge immunity level at least 10 KV non integral... Flood Light lumens

shall be more than 9900 (Note:- The manufacturer / authorized

Channel partner of the manufacturer has to submit 5yrs free

replcement Guarantee for complete Fixture)

It. Estimate Quoted Rate in Rs.

Description of Item Qty Unit Amount

No. In Figure In Words

30 SITC of Outdoor aesthetically designed LED Flood Light Luminaire 6.00 Each 7395.00 Rupees Seven

with total consumption of maximum 120 W with single piece die cast Thousand Three

aluminium housing, LED's mounted on high quality metal core based Hundred Ninety Five

PCB with extremely precison designed heat sink, complete with IP66 Only

protection Class, with polycarbonate / Toughened glass cover. The

fixture should be suitable for pole/bracket mounting. The fixture to

comply both LM79 and LM 80 guidelines with LED minimum

lumen/watt with L70 at 50,000 hrs, provided with high quality

polycarbonate Seperate lenses for better light distribution. The Fixture

Should be able to be Pole Mounted and also bracket mounted,

provided with high quality potted driver for protection against, high and

low Voltage cut Off, opertional for high amibient and high humid

envirnoments, THD of driver should be less than 10% and P.F > 0.95.

Also the Fixture should meet the following technical criterias. Operating

range Voltage 160 to 270V, system efficiency > 110 lm/w, CCT >

5000K, CRI >65, beam angle 120 deg, 4kV integral & non integral

surge immunity level at least 10 KV non integral... Flood Light lumens

shall be more than 13200 (Note:- The manufacturer / authorized

Channel partner of the manufacturer has to submit 5 yrs free

replcement Guarantee for complete Fixture)

31 Supplying & fixing box for housing ELCB + MCB combination made 5.00 Each 272.00 Rupees Two Hundred

of 18 SWG sheet steel duly powder coated with gasket, dust & vermin Seventy Two Only

proof bakelite shield two earthing terminals for following type of RCCB,

ELCB, ELCB + MCB (a) For 2 pole

Total in Rs. →

Contractor Signature Ex.Engg,(Ele.)(SP)

G.S.P.H.C.Ltd,