REPAIR AND MAINT OF LT PANEL UG CABLES LT OVERHEAD CONDUCTORS AND MISC CONNECTED WORKS AT RALAWAS UNDER GE BANAR

Material and labour for scraping the rusted surface of LT panel/feeder pillar any descreption/size (approx size 2 to 4 Sqm) and applying the primer coat of red oxide and painting on surface of LT Panels/feeder pillars 2 coats of super enamal paint grey/sky blue/existing colour with sparygun including writing of LT panel numbers in appropriate size of letters complete all as specified.

Supply and Fixing in replacement of Mild steel sliding door bolts plate type, stove enamelled black, with bright bolt not less than 12mm dia, 200mm long bolt with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed on Front and rear side of the Doors of LT panel board complete all as specified.

Material and labour for repairing/replacing the broken hinges of LT panel shutters with stainless steel hinges of 200mm long by welding/bracing with nut bolts of existing LT panels shutters of any descreption complete all as specified.

M&L for replacement of LT panel / feeder pillar boxes front side or back side corroded / damaged double doors of size upto 1.50 m*1.50 m each by cutting, bending, welding MS sheet to suit with the existing MCCB's including providing hinges ,door locking system complete all as specified.

Supply, laying, testing & commissioing of 16 Sqmm 2 core size XLPE insulated, PVC sheathed, galvanised steel strip or wire armoured, electric power cable (heavy duty) with multistranded aluminum conductors, IS 7098 Part I marked, suitable for LT 1100 Volt system,laid in trenches / ducts / fixed on poles / walls / laid under roads / paths / drain / culverts or encased in GI pipe including jointing & testing and taking down old U/S cable complete all as specified and as directed Note :- Excavation, earth work ,cable protection , sand fillings shall be measured and paid separately under respective items of schedule.

All as per Ser No 5 above but size 10 sqmm 4 core

All as per Ser No 5 above but size 16 sqmm 4 core

All as per Ser No 5 above but size 25 sqmm 4 core

All as per Ser No 5 above but size 35 sqmm 3.5 core

All as per Ser No 5 above but size 50 sqmm 3.5 core