Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.1 LAdmitted-Finance | L1 | Admitted-Finance | |
| 2 | Rejected-Technical 7 NDS1 INDUSTRY PLOT NO 132 133 MAIN ROAD SAKRI TO MADHUBANI PANDAUL MADHUBANI BIHAR 847234 | MADHUBANI | BIHAR | 847234 | - | Rejected-Technical Party failed to submit documents in line with PQC |
| Sl No | Description | Qty | Unit | MINI ENTERPRISES L1 |
|---|---|---|---|---|
| 1.00 | Removal of old rubber from the damaged portions of equipment, vessels, tanks, ducts, on floors, pipes, etc. at various plants and at various elevations. Preparation of surface by chipping/ grinding/ wire brushing/ Sand/ shot blasting etc. as per the instructions of the Engineer-in-charge. Carryout new rubber lining using suitable rubber sheets of 2.5 mm thick in TWO layers to get a thickness of 5 mm with required adhesives, solvents, curing agents, etc. and cure it with steam/ hot water to get a hardness of 60 to 70 shore A . All arrangements and materials required for rubber removal and fresh rubber lining will be under the contractor's scope. | 150 | M2 | 5,200 ₹7,80,000 Lowest |
| 2.00 | Carryout fresh rubber lining after removing the scales, paint etc. by wire brushing/ grinding/ Sand/ Shot blasting or by any means as directed by the Engineer-in-charge so as to get a smooth surface on newly fabricated pipes, ducts, tanks, etc. Supply of suitable rubber sheets and carry out fresh rubber lining with 2.5 mm thick rubber sheets in TWO layers (2.5 mm x 2 = 5 mm thk) with required adhesives, solvents, curing agents, etc. and curing with steam/ hot water to get a hardness of 60 to 70 shore-A. All arrangements and materials required for fresh rubber lining will be under the contractor's scope. | 100 | M2 | 4,500 ₹4,50,000 Lowest |
| 3.00 | Carryout sand/ shot blasting as per applicable standards over ducts, vessels, tanks, and equipment like turbines, various rotors, fans, agitators, pumps etc. Any in situ sand/ shot blasting required shall also be done by the contractor. All the necessary arrangements and equipment including Air- compressor required for sand blasting shall be under the scope of contractor. | 100 | M2 | 1,000 ₹1,00,000 Lowest |
| 4.00 | Splicing of Conveyor Belt of width 300 mm by cold vulcanizing method | 5 | NO | 5,500 ₹27,500 Lowest |
| 5.00 | Splicing of Conveyor Belt of width 400 mm by cold vulcanizing method | 2 | NO | 6,000 ₹12,000 Lowest |
| 6.00 | Splicing of Conveyor Belt of width 500 mm by cold vulcanizing method | 8 | NO | 6,500 ₹52,000 Lowest |
| 7.00 | Splicing of Conveyor Belt of width 600 mm by cold vulcanizing method | 10 | NO | 7,000 ₹70,000 Lowest |
| 8.00 | Splicing of Conveyor Belt of width 750 mm by cold vulcanizing method | 10 | NO | 7,500 ₹75,000 Lowest |
| 9.00 | Splicing of Conveyor Belt of width 900 mm by cold vulcanizing method | 5 | NO | 8,000 ₹40,000 Lowest |
Tender Value
Refer Docs
EMD Value
₹25,000
Closing Date
20 Jun 2025, 11:00 amClosed
AGM(Mat)C
Corporate Materials, PD Administration Building, FACT- Udyogamandal, Kochi, Kerala.
Miscellaneous Rubber lining and Cold vulcanizing of conveyor belt works in various plants of FACT UC, as per tender conditions.
2025_FACT_862425_1
03008/2025-2026/E31568
Open Tender
Miscellaneous Works
Item Rate
365 days
FACT- Udyogamandal
Please refer tender documents.
7 documents required · 7 mandatory
₹0
₹25,000
Yes
25 Aug 2025
30 May 2025
21 Jun 2025
30 May 2025
20 Jun 2025
30 May 2025
Amount
Removal of old rubber from the damaged portions of equipment, vessels, tanks, ducts, on floors, pipes, etc. at various plants and at various elevations. Preparation of surface by chipping/ grinding/ wire brushing/ Sand/ shot blasting etc. as per the instructions of the Engineer-in-charge. Carryout new rubber lining using suitable rubber sheets of 2.5 mm thick in TWO layers to get a thickness of 5 mm with required adhesives, solvents, curing agents, etc. and cure it with steam/ hot water to get a hardness of 60 to 70 shore A . All arrangements and materials required for rubber removal and fresh rubber lining will be under the contractor's scope.
Carryout fresh rubber lining after removing the scales, paint etc. by wire brushing/ grinding/ Sand/ Shot blasting or by any means as directed by the Engineer-in-charge so as to get a smooth surface on newly fabricated pipes, ducts, tanks, etc. Supply of suitable rubber sheets and carry out fresh rubber lining with 2.5 mm thick rubber sheets in TWO layers (2.5 mm x 2 = 5 mm thk) with required adhesives, solvents, curing agents, etc. and curing with steam/ hot water to get a hardness of 60 to 70 shore-A. All arrangements and materials required for fresh rubber lining will be under the contractor's scope.
Carryout sand/ shot blasting as per applicable standards over ducts, vessels, tanks, and equipment like turbines, various rotors, fans, agitators, pumps etc. Any in situ sand/ shot blasting required shall also be done by the contractor. All the necessary arrangements and equipment including Air- compressor required for sand blasting shall be under the scope of contractor.
Splicing of Conveyor Belt of width 300 mm by cold vulcanizing method
Splicing of Conveyor Belt of width 400 mm by cold vulcanizing method
Splicing of Conveyor Belt of width 500 mm by cold vulcanizing method
Splicing of Conveyor Belt of width 600 mm by cold vulcanizing method
Splicing of Conveyor Belt of width 750 mm by cold vulcanizing method
Splicing of Conveyor Belt of width 900 mm by cold vulcanizing method
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .