Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.1 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹9.3 L+₹16,790.20 (1.84%)Rejected-Finance | L2 | Rejected-Finance Not lowest bidder |
Tender Value
₹9.6 L
EMD Value
₹19,100
Closing Date
10 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Banar
Garrison Engineer Banar, Jodhpur-342027
PROVISION OF GUARD ROOM WITH ATTACHED BATHROOM AT MAIN GATE UNDER ARMY AREA AT BANAR
2022_MES_538674_2
8822/12/E8
Open Tender
Civil Works
Item Rate
180 days
Banar
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Garrison Engineer Banar
₹19,100
Yes
10 Nov 2022
20 Aug 2022
12 Sept 2022
20 Aug 2022
10 Sept 2022
27 Aug 2022
Amount
BUILDING WORKS : Surface excavation n. exc.30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified.
Excavating in trenches in any type of soil n.exc. 1.5m wide and n.exc 1.5 m in depth, for foundation, etc. or for shafts, wells, cess pits, manholes, pier holes, etc n.exc. 10 sqm on plan and n.exc 1.5m in depth and getting out complete all as specified..
M&L for cement concrete (1:4:8) type D2 using 40 mm graded stone aggregates as in foundation, filling and mass concrete complete all as specified.
M&L for square rubble walling , Jodhpur type regular coursed , well bonded bedded and solidly hearted built in CM (1:6 ) complete all as specified.
Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints , as specified of squared rubble walling , regular coursed with maximum depression on face stone straight held the againest the dressed surface n'exc 20 mm GL to LL complete all as specified.
External angle ( for quoins and jambs ) in facing for squared rubble walling jodhpur type regular coursed complete all as specified..
M&L for rendering 15 mm thick in CM 1:6 on stone masonry surfaces finished even and smooth without using extra cement complete all as specified.
M&L Keyed pointing random or polygonal rubble , uncoursed or brought up to course in CM 1:3 complete all as specified.
M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate as in roof beams complete all as specified..
M&L for form work to sides and soffits of flat, fair finished surfaces of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified.
M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate as in roof slabs complete all as specified..
M&L for form work to sides and soffits of suspanded slabs such as roof slabs, floor slabs, landing and similar work , not exc 200 mm thick complete all as specified.
M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate as in chajjas complete all as specified.
M&L for form work to fins, facias, chajja complete all as specified.
M&L 20 to 25 mm thick kota stone over and incl 15 mm thick screed bed CM 1:6, 75 mm thick PCC type D2, 1:4:8 and rammed earth complete all as specified.
M&L for Non skid colour ceramic tiles size 400 mm x 400 mm , 8 to 9 mm thick in flooring laid over and incl 15 mm thick bedding layer in CM 1:4, and 75 mm thick PCC 1:4:8 type D2 complete all as specified.
M&L for glazed colour ceramic tiles size 300 mm x 200 mm , 6 to 7 mm in skirting/Dado over and including 10 mm thick backing coat in CM 1:3 complete all as specified.
M&L for rendering 5 mm thick in CM 1:3 on brick work or concrete surfaces finished even and smooth without using extra cement on ceiling complete all as specified.
M&L for preparation of new plastered surfaces and applying Three coat of white wash on ceilings complete all as specified.
M&L for preparation of new plastered surfaces and applying Two coat of OBD on Walls over one coat of primer complete all as specified.
M&L for preparation of new plastered or unplastered surfaces and applying Two coat of cement base paint on Walls complete all as specified.
M&L for preparation of new or previously untreated steel surfaces of any description(new galvanized steel surfaces), over 10 cm in width or girth not otherwise described to receive painting, by coating with mordant solution including washing and cleaning and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.
M&L for preparation of new or previously untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and apply two synthetic enamel paint tover a coat of pink primer complete all as specified.
M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified over a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per sqm including cleanig of surfaces complete all as specified.
Supply only WPC compound
M&L for 50 mm thick PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in plinth protection complete all as specified.
S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing
S&F for 165x60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified.
S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified.
S&F Steel windows or ventilator fixed type with glazing bars complete all as specified.
S&F for 35 mm thick Glazed and skeleton shutters (2nd class hard wood), open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified.
S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified.
S&F 4.00 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified.
M&L 75 mm dia spun pipe Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed in walls complete all as specified.
M&L 75 mm dia spun pipe Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified.
M&L 80 mm dia CI slotted vent cowl complete all as specified.
M&L 75 mm dia CI Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified.
M&L 75 mm bore CI Bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified.
M&L 100mm dia Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified.
M&L PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified.
S&F vitreous china wash down water closet pan, semi pedestal pattern (Anglo-indian Type), white, with and including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, PVC valveless, syphonic action type, flushing cistern, low level, 10 litres capacity, white, with inlet, ball valve, float and handle including brackets including PVC flushing pipe, 32 mm dia, brass CP jet and fixed complete all as specified
S&F vitreous china bowl urinal flat back, size of 465X355X265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) and fixed complete all as specified
S&F vitreous china wash basin, white, flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets or erecting stand, brass chromium plated perforated waste coupling/ fittings 32 mm dia with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed and PVC waste pipe of 32mm bore and of suitable length, complete all as specified
M&L 15 mm bore Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified.
M&L 20 mm bore Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified.
M&L 25 mm bore Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified.
S&F 1000 ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mm dia brass float valve complete all as specified.
M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified.
M&L for mild steel TMT bars 5 mm dia and over up to and including 10 mm dia in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified.
Removal of surplus soil exc 250 m but n. exc 500 mtr and deposited where directed complete all as specified.
SEWAGE DISPOSAL WORKS : Excavation in trenches n. exc 1.50 metre wide and n. exc 1.5metre deep for foundation or for shafts, wells, cesspits, manholes, pier holes not exceeding 10 Sqm on plan and getting out in soils/loose soil complete all as specified.
PCC (1:4:8) type D-2 using 40mm graded crushed stone aggregate in foundation filling /bed of man holes complete all as specified.
PCC (1:4:8) type D2 using 40mm graded crushed stone aggregate in concrete bedding to drain pipes, including packing under and haunching against the sides of pipes after they are laid and tested complete for 150mm bore pipe complete all as specified.
M&L reinforced concrete pipes 150mm bore, class NP-2, laid and jointed complete all as specified.
M&L Precast cement concrete block masonary with solid block of (1:4:8) type D2 exc 10 cm in width & setting in cm (1:6) complete all as specified.
M&L Cement concrete (1:2:4) type B1 using 20 mm graded crushed stone aggregate in surface channels or drains and benching including finishing the top of benching even and smooth using extra cement complete all as specified.
Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred /stopped ends etc
Add to Srl item No. 59.00 above for each 25mm girth or part thereof over 30cm.
M&L for Precast reinforcement cement concrete M-25 (Design Mix) using 20 mm graded crtushed stone aggr for manhole cover including placing in position and set in CM( 1:4) complete all as specified.
M&L High strength deformed TMT steel bars in reinforcement 10 mm dia , cut to length , bent to shape rrequired including craking, bending, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified.
M&L Mild steel work conforming to Fe-290 Gde E-165 in flat iron and similar small articles complete all as specified.
M&L Rendering 10 mm thick on block masonary walls In cm (1:4) mixed with WPC as per manufactures instructions. (Note : WPC shall be measured and paid sepately) complete all as specified.
Supply only integral water proofing compound
M&L for PCC 1:2:4 type B-1 as in coping incl necessary form work complete all as specified.
Returning , filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm in soil complete all as specified.
Removing excavated material any type of soil exc. 250 m but n exc. 500 m and depositing where directed complete all as specified.
Construction of RCC Hume Pipe septic tank designed to carry sewage and sullage water with excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc., complete for 10 Users complete all as specified.
Construction of Soakage wells with excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 1.20m dia X 3.00 m effective depth complete all as specified.
INTERNAL ELECTRIFICATION WORKS : M&L for point wiring of any length using approved colour coding as per IS, with stranded copper conductor 1.5 Sq.mm (Nominal area), single core, PVC insulated and unsheathed stranded FRLS cable 1100 volts grade, ISI - 694 marked, in PVC rigid conduits heavy duty ISI marked totally concealed in wall/floor/roof including all accessories etc. with 2 mm thick sunken boxes including 3mm thick laminated sheet cover suitable for mounting switches/sockets etc. and PVC insulated stranded copper conductor 1.5 Sq.mm single core cable as earth and connecting to common earth dolly complete all as specified for the following:-Note- (i) Cutting in chases and pointing in will be done by contractor without any cost. (ii) Making good of distrubed surfaces matching with existing finishes will be done by contractor without any extra cost .
One light/fan point controlled by one way switch complete all as specified.
One fan point controlled by one one way switch complete all as specified.
5 Amp Socket outlet on same board complete all as specified..
5 Amp Socket outlet on independent board complete all as specified..
All as per item No. 71 above here in before but point wiring with 4 sqmm single core multistranded copper conductor FRLS PVC insulated and unsheathed calbe 1100 volts grade for 15/16 Amp socket outlet on independent board incl 4 sqmm copper conductor FRLS PVC insuleted cable for earth continiuty all as specified.
Supply and fixing switch Piano flush type 5 Amp single pole complete all as specified.
Supply and fixing multipurpose socket outlet 2 in 1, 3 pin, 5 Amp flush type contrlled by one switch all as specified.
Supply and fixing ceiling rose on PVC board size 65X50 mm three terminal complete all as specified.
Supply and fix Heavy duty Metal body exhaust fan 300 mm sweep, including louvers grounting with nut bolts complete all as directed.
Suply and fixing connecting and testing sheet metel enclosure double door single pole neutral , 08 way DB's for using MCBs/MCB isolator with having copper bus bar suitable for 200 Amps rating with IP-42 protection complete all as specified. NOTE: Rates are deemed to be included for flushing in wall concealed complete making good and matching existing surface.
Supply and fix MCB SP 6-32 Amp 240 Volt. 10 KA complete all as specified.
S & F MCB SPN 40 Amp 240Volt 'C' series 10 KA complete all as specified.
Supply and fix ceiling fans 120mm sweep, complete with three blade, down rod, regulator accessories 230V, with Squirrel cage induction motor complete all as specified.
Supply and fixing Earthing complete with GI earth plate eletrode 60 cm X 60 cm X 6.0 mm thick barried directly in ground vertically to a depth note less than 2.25 metres below ground level with top edge of earth plae at a depth note less than 1.5 metres below level ground, connected to GI iron or steel earth wire 4 mm dia (8 SWG) by means of nuts , bolts checks nuts,washers and earth wire protected by GI iron pipe 15 mm bore, medium grade and connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, pre cast RCC coverslab 30cmX30cmX10cm with one lifting handle made of 8mm dia ms bar funnel wire mesh, 20mm bore GI or steel pipe medium grade for watering, charcoal or coke and salt in alternate larges, necessary excavatin and earth work in any type of soil complete all as shown electrical plate No 3 of MES schedule part-I and testing after complete all as specified.
Supply and fixing LED lights fitting 1x 22W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified.
S&F LED security light luminaries 45 watt complete with all accessories and wall mounting bracket of suitable size including clamps, nut bolts etc. prewired complete all as specified.
Supply and installed of Electric water heater 25 ltr capacity BEE 4 star rated with remote control operation for ease of use and inteligent timer to preset temp time for hot water complete all as specified.
S & F 240 V, Single pole and neutral enclosure with a two pin and earth plug and socket complete with one 20 amp single pole MCB complete all as specified.
Material and labour for PVC connection 15mm dia of 450 length with brass nuts for cold side complete all as specified.
Material and labour for PVC connection 15mm dia of 600 length with brass nuts for hot side complete all as specified.
EXTERNAL ELECTRIFICATION WORKS : Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr deep and getting out any type of soil all as specified.
Returining, filling in including spreading, levelling watering and well ramming in layer not exce 25 cm, complete all as specified.
Removing excavated material to a distance not exce 50 mtr and deposited where directed at a level not exceding 1.5 mtr abvoe the starting point complete all as specified.
M&L for clean, dry sand in trenches/ducts for cushioning to cable complete all as specified.
M&L for Jodhpur stone patti slab cover 25cm to 30cm in width, 60cm long and 40 to 50mm thick laid in trenches for cable protection complete all as specified.
Supply laying and testing cable XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with standed allumiuium conductor of size 10 sqmm 2 core complete all as specified..
Supply and lay galvanised medium grade 40 mm dia with all fittings laid in trenches/floor complete all as specified.
EXTERNAL WATER WORKS : Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr deep and getting out any type of soil complete all as specified.
Returining, filling in including spreading, levelling watering and well ramming in layer not exce 25 cm complete all as specified.
Removing excavated material to a distance not exce 50 mtr and deposited where directed at a level not exceding 1.5 mtr abvoe the starting point complete all as specified.
Drilling of water pipe line of any type and size and type for connection of 25/20 mm GI pipe with clamp and other assesries complete all as specified.
Supply and laying GI tubing medium grade 25mm bore with all fittings and fixed complete laid in trenches/fixed to walls (including clamps)/fixed on pillars etc complete all as specified and directed.
Supply and laying GI tubing medium grade 20mm bore with all fittings(ISI Marked) and fixed complete laid in trenches/fixed to walls (including clamps)/fixed on pillars etc complete all as specified.
Supply and fixing Gun metal Globe or Gate valve 25mm dia with iron wheel head, screwed both ends for iron pipe, non rising forged brass spindle class I and fixed with required necessary GI fittings complete all as specified.
Supply and fixing Gun metal Globe or Gate valve 20mm dia with iron wheel head, screwed both ends for iron pipe, non rising forged brass spindle class I and fixed with required necessary GI fittings complete all as specified.
Bhawani Enterprises
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .