A/R and M/O on Nagrota Bagwan Ranital Mubarikpur road (NH-303) Km.0/000 to 39/000

Amount

Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50(fifty) metres lead of: G.S. Sheet as per the direction of Engineer in charge.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5m (one point five metre) in width or 10 sqm (ten square metre) on plan, including dressing of sides and ramming of bottoms, lift upto 1.5 m (one point five metre), including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m (fifty metre) as per the direction of Engineer in charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (one cement : four coarse sand : eight graded stone aggregate forty millimetre nominal size) including carriage of material with in all leads and lifts complete in all respect as per the direction of Engineer in charge.

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (one cement : six coarse sand : twelve graded stone aggregate twenty millimetre nominal size) upto plinth level with : Cement mortar 1:6 (one cement : six coarse sand) including carriage of material with in all leads and lifts complete in all respect as per the direction of Engineer in charge.

Centering and shuttering including strutting, propping etc.including carriage of material with in all leads and lifts complete in all respect as per the direction of Engineer in charge.

Lintels, beams, plinth beams, girders, bressummers and cantilevers

Suspended floors, roofs, landings, balconies and access platform

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven pont five) in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (one cement : six coarse sand) including carriage of material with in all leads and lifts complete in all respect as per the direction of Engineer in charge.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (one cement : one point coarse sand) : three graded stone aggregate twenty millimetre nominal size).including carriage of material with in all leads and lifts complete in all respect as per the direction of Engineer in charge.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Mild steel and Medium Tensile steel bars including cutting hosting fixing in postion including carriage of material with in all leads and lifts complete in all respect as per the direction of Engineer in charge.

Steel work welded in built up sections, trusses and framed work including cutting hosting fixing in postion and applying a priming coat of rea lead paint. In trusses and trussed pulines in buildings.including carriage of material with in all leads and lifts complete in all respect as per the direction of Engineer in charge.

Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm,(thirty five into thirty five into five millimetre) joints mitred and welded by angle iron 35x35x5 mm (thirty five into thirty five into five millimetre) or 35x 5 mm (thirty five into five millimetre)flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge.

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) Second class teak wood. 35 mm (thirty five millimetre) thick.including carriage of material with in all leads and lifts complete in all respect as per the direction of Engineer in charge.

Providing and fixing wire gauge laminated veneer lumber shutters conforming to IS : 14616, and as per TADS 15 :2001 (fifteen istoo two thousand one) (Part B) using galvanised wire gauge with average width of aperture 1.4 mm (one point four milimetre) in both directions with wire of dia 0.63 mm(zero point six three millimetre) as per IS :1568,(Indian Standard istoo one thousand five hundred sixty eight) for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, as per directions of Engineer-in-charge: (Note:- Butt hinges and necessary screws shall be paid separately) 35 mm (thirty five millimetre) thick .including carriage of material with in all leads and lifts complete in all respect as per the direction of Engineer in charge.

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm (Eight Milimetre) diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm (Zero point sixty three milimetre) thick with zinc coating not less than 275 gm/ m²

Providing ridges or hips of width 60 cm (Sixty Centimetre) overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 0.63mm( zero point sixty three) thick with zinc coating not less than 275gm/m²

Providing and fixing prelaminated partical board ceiling of approved quality with butt jointing and nail.(frame work and cover fillets to be paid for separately) Prelaminated partical board with both sides decorative laminatation, flat pressed three layers & graded(medium density) Gr- I Type II conforming to IS: 12823 (Indian Standard is too twelve thousand eight hundred twenty three) 12mm (twelve millimetre) thick

Painting two coats (excluding priming coat) on new wood and wood based surfaces with enamel paint to give an even shade including cleaning the surface of dirt dust and other foreign matter sand papering and stoping. Enamel paint other than white

Repairs to plaster of thickness 12 mm to 20 mm (twelve millimetre to twenty millimetre) in patches of area 2.5 sq.meters(two point five square metre) and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (one cement : four fine sand)

Boulder filling dry hand packed tightly as in wire crate apron bund (wire crates to be measured separately). including carriage of material with in all leads and lifts complete in all respect as per direction of Engineer-in-Charge.

Cement concrete flooring 1:2:4 (one cement : two coarse sand : four graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. including carriage of material with in all leads and lifts complete in all respect as per direction of Engineer-in-Charge. 40 mm (forty millimetre) thick with 20 mm ( twenty millimetre) nominal size stone aggregate

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08%(zero point zero eight percent) and conforming to IS: 15622 (Indian Standard istoo fifteen thousand six hundred twenty two), of approved make, in all colours and shades, laid on 20mm (twenty millimetre) thick cement mortar 1:4 (one cement : four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (at rate of three pont three kilogramme per square metre) including grouting the joints with white cement and matching pigments etc., complete including carriage of material with in all leads and lifts complete in all respect as per direction of Engineer-in-Charge. Size of Tile 600x600 mm ( six hundred intoo six hundred millimetre)

Distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work as per direction of Engineer-in-Charge.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 (ten) litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231 (Indian Standard is to seven thousand two hundred thirty one), with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid as per direction of Engineer-in-Charge.

Providing and fixing wash basin with C.I. brackets, 15 mm (fifteen millimetre) C.P. brass pillar taps, 32 mm (thirty two millimetre) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm (six hundred thirty intoo four hundred fifty millimetre) with a pair of 15 mm (fifteen millimetre) C.P.as per direction of Engineer-in-Charge.

Providing and fixing to wall ceiling and floor galavanized mild steel tubes (Medium grade) tube fitting and clamps including making good the wall, ceiling and floor 15mm (fifteen millimetre) nominal size.as per direction of Engineer-in-Charge.

Providing and fixing soil, waste and vent pipes Centtrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS:3989(Indian Standrad is to three thousand nine hundred eighty nine). 100 mm (one hundred millimetre)dia.as per direction of Engineer-in-Charge.

Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter : 100mm (One hundred millimetre)as per direction of Engineer-in-Charge.

Providing and fixing plain bend of required degree.100mm (One Hundred milimetre) dia.as per direction of Engineer-in-Charge.

Providing and fixing C.P. brass bib cock of approved quality conforming to IS: 8931(Indian Standrad is to eight thousand nine hundred thirty one). 15mm (fifteen millimetre) nominal bore.as per direction of Engineer-in-Charge.

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931(Indian Standrad is to eight thousand nine hundred thirty one)..15mm (fifteen millimetre) nominal boreas per direction of Engineer-in-Charge.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.32mm diaas per direction of Engineer-in-Charge.

Providing and fixing 100 mm (one hundred millimetre) sand cast Iron grating for gully trap.S.C.i gully or nahani grating 100 mm (one hundred millimetre) dia.as per direction of Engineer-in-Charge.

Providing and fixing collar. 100mm (one hundred milimetre) Sand cast iron S&S as per IS-3989 (Indian Standrad is to three thousand nine hundred eighty nine). as per direction of Engineer-in-Charge.

Providing and fixing PVC water tank having a capacity of 500 ltr (five hundred litre). With necessary fitting including arrangement pads of required size for inlet and outlet and insde painting of quality complete including hosting complete in all respect as per direction of Engineer-in-Charge.

VISHALI DHIMAN GOVERNMENT CONTARCTOR

Munish Kumar