REPAIR/REPLACEMENT OF JOINERY PLUMBING WORKS, PERIODICAL SERVICES ROOF, FLOOR, WALL PLASTER, PVC BOARD, CHAJJA DOOR/WINDOW AND OTHER MISC B/R WORKS AT TECHNICAL AND RESIDENTIAL AREA OF DEAL UNDER GE (I) RND DEHRADUN

Amount

M&L for cutting down removing vegitation plant digging out penetrated roots with tronices looping branches not exc. 10cm girth PROTRUDING over wall roofs by necessary cutting hole in brick / concrete wall/ surfaces and injecting chemical GLYPHOSPHATW 41% SL 20 ml or till refusal by makimg cut/ injection in the stem of plant 30mm C/C spraying with solution (25ml Glyphospoto 41% diluted with one litre water) and making good in cement mortar 1:3 or cement concrete 1:2:4 type B1 and to match the existing work and finishes and removing of debris out side premises/ defence land including necessary scaffolding etc wk will be carried out upto 5th to 8th storey height bldgs complete all as specified & directed.

M&L for cutting down removing vegitation plant digging out penetrated roots with tronices looping branches not exc. 10cm girth PROTRUDING over wall roofs by necessary cutting hole in brick / concrete wall/ surfaces and injecting chemical GLYPHOSPHATW 41% SL 20 ml or till refusal by makimg cut/ injection in the stem of plant 30mm C/C spraying with solution (25ml Glyphospoto 41% diluted with one litre water) and making good in cement mortar 1:3 or cement concrete 1:2:4 type B1 and to match the existing work and finishes and removing of debris out side premises/ defence land including necessary scaffolding etc wk will be carried out upto 4th storey height bldgs complete all as specified & directed.

M&L Plain cement concrete 1:5:10 type E-2 (using 40mm graded stone aggregate as in foundation filling & Mass concrete , sub base complete all as specified and directed.

M&L for cement concrete (1:2:4) type B-1 using 20 mm graded crushed stone aggregate as in lintels upto 1.5 clear span , cills steps seismic and other similar bands, copings, hold fast and the like incluing weathering , slightly rounded or chamfered angles and throating asdirected with and icluding necessary form work in CM 1:4 complete all as specified and directed.

M&L for RCC(1:2:4) type B-1using 20 mm graded stone aggregate as in slab supported on walls, beams, and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Material and labour for 50mm thk (average) PCC 1:2:4 type B-1 using 20mm graded stone agg as in roof padding finished even and smooth without using extra cement all as specified and directed .

Supply only Liquid water proofing compound ISI Marked (used 200 ml per bag of cement) complete all as specified and directed.

M&L for Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills sunshades, shelves lintels etc and cutting chases for concealed water pipes etc and making good cutting not exc 10cm.complete all as specified and directed.

M&L for cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed.

M&L for Brick work with sub class B bricks, straight or curved on plan exceeding 6m mean radious built in cement mortar (1:6) complete all as specified and directed.

M&L for brickwork with sub- class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

Taking down Chowkats or frames with shutter (without taking off shutters from the frame) exc. 1.50 sqm but n. exc. 4.00 sqm each complete all as specified and directed.

Taking down chowkats or frames with shutter (without taking off shutters from the frame) n. exc. 1.50 sqm each complete all as specified and directed.

Taking down shutters of any description exc. 2.0 sqm each complete all as specified and directed.

Taking down shutters of any description area exc. 1 sq. m and n exc 2 sq. m each and refixing in same opening after repairing with necessary fittings complete all as specified and directed.

Taking down shutters of any description area exc. 2 sq. m each and refixing in same opening after repairing with necessary fittings complete all as specified and directed.

Taking down and re-fixing the same Alumuinium window/ ventilator shutters, (each shutter area n.exc 1sqm) after carrying out repairs as required including removing the existing beading and fixing new rubber beading of suitable size with adhesive, ccomplete all as specified and directed.

Taking down and re-fixing the same existing Aluminium door (each shutter area n. exc 4sqm) after carrying out repairs as required, removing the existing beading and fixing new rubber beading of suitable size with adhesive, overhauling of floor springs including greasing and oiling complete all as specified and directed.

S & F 30mm thick 2nd class hardwood glazed and skeleton shutters divided into squares, with plain, chamfered or roun- ded, mitred and rebated sash bars, any numbers, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S&F 30mm thick flush shutters, solid core construction, with partical board core and plywood face panels, commercial type on with both face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed.

S&F of solid PVC door frame os size 50mm X 47mm made out of 5mm thick single side prelaminated PVC sheet used instead of plain colour PVC sheet and edges will be painted to match with the prelaminated sheet reinforced with MS square tube all as per drawing and complete all as specified and directed.

S&F factory made solid PVC moulded door shutter 28 to 30mm thick (stiles), with 2,4 or 6 raised panel design with 5mm thick moulded PVC prelam sheet on front face and 5mm prelam coloured PVC sheet on back face, complete all as specified and directed.

Supply and fix galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of apertures 1.18 mm and fixed with tinned tacks or galvanized wire staple complete all as specified and directed.

Supply and fix in repairs galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of apertures 1.18 mm and fixed with tinned tacks or galvanized wire staple complete all as specified and directed.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified.

S&F Stainless steel handles 150mm size for kitchen cabinet shutters and complete all as specified and directed.

S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flap (when open) 30 mm complete all as specified and directed.

S & F 200 mm size Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S & F 150 mm size Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S & F in repairs 300 mm size Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed.

Supply & Fixing 150 mm size Aluminium handles, cast type, anodised complete all as specified and directed.

Supply & Fixing 125 mm size Aluminium handles, cast type, anodised complete all as specified and directed.

S&F Butt hinges, medium weight coldrolled mild steel and fixed 100mm size complete all as specified and directed.

S&F Butt hinges, medium weight coldrolled mild steel and fixed 75mm size complete all as specified and directed.

S&F in repair floor door stopper double leg of aluminium alloy body of 140 mm length with aluminium base plate of size 50 mm x 40 mm complete all as specified & directed.

S&F in repairs 4 lever brass mortice lock, vertical type, size 100 mm complete all as specified and directed.

S&F PVC coloured vertical blind / roller blind hanging on powder coated hanging arrangement including roller and all necessry fixing and fetures as per manufacture instruction complete all as specified and directed.

S&F in repair drapery fancy type curtain rod shall be 32 mm dia of aluminium pipe with powder coating with wooden finish including bracket rings, fancy knob , curtai ring 08 Nos minimum including all fixing arrangement complete all as specified and directed.

S&F powder coated aluminium frame for doors, windows or partition including aluminium beading, hinges of required size,jointing cleats, screws, dash,fastners,plug for fixing with wall, columns etc complete all as specified & directed.

S&F Powder Coated aluminium window and ventilator shutters side hung type without sash bars, , aluminium section weighing not less then 0.55kg/m including necessary jointing cleats/ glazing clips, rubber neoprene packing, anodised aluminium snap beading , screws, anodised aluminium fittings such as peg stay 150mm long (1 No) hinges type B-21 100mm long ((2 Nos) suitable handle (1 No) complete all as specified and directed.

S&F powder coated of any colour aluminium door shutters, aluminium section like lock rail, bottom rail 115mmX38mmX1.00mm thick and top rail and vertical rail 100mmX38mmX1.00mm thick mm including necessary jointing cleats/glazing clipx, rubber neorene paking, handles 02 Nos in each door, locking arrangment, aluminium snap beading screw etc, complete all as specified and directed. (panels likes prelaminated particle board / sheet glass shall be measured and paid seprately)

Providing and fixing pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed of size 105mm x 60mm complete all as specified and directed.

M& L for Mild steel TMT bars 8 mm dia and over cut to length, bent to shape required, including cranking, bending spi-rally for hooping for col-umns, hooking ends and binding with and in-cluding mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for bitumastic gola, with 80/25 bitumen and coarse sand mixture. 1:3 by weight, 8cmx8cm at the junction of roofing to vertical surfaces complete all as specified and directed.

M&L for A coat of cold applied bituminous primer over cleaned surface @ 0.30 Kg/Sqm and applying one coat of hot blown bitumen 85/25 grade @ 1.20 Kg/Sqm followed by APP modified five layer polymeric membrane 3mm thick, minimum weight 3.60 kg/sqm reinforced with polyester non-woven fabric (weighing not less than 150 gms/sqm) manufactured by authorised manufacturer specified in particular spicification, laid as per the manufacturer instruction with side over lap of 75mm & end over lap of 100mm & tucked into the chases on vertical surfaces and applying one coat of hot blown bitumen 85/25 grade @ 1.20 Kg/Sqm finally finished with bituminous aluminum paint @ 0.20 Kg/Sqm complete including taking down existing roof treatment from RCC slab, cleaning off all foreign material by wire brushing, cleaning off surface and removal of spoil to out side MOD Land complete all as specified & directed. Note:- The work shall be executed through authorised applicator approved by GE.

M&L for suspended false ceiling system using chicago metallic (E grid)exposed supended system, grid section size 600mm X 600mm comprising of GI powder coated Main Runner of dimensions 39 mm X 24mm X 0.8mm thick (thickness comprising of GI/0.4+ PPPCGS/0.3mm & weight of runner 1.35 kg for 3600mm length) Cross Tee of dimensions 29mm X24mmX0.8mm thick and thick wall angle 22.2mmX22.2mmX 0.65 mm thick ( thickness comprising of GI/0.35+ PPPCGS/0.3mm & weight of angle 0.70 kg for 3050mm length)with and including 4mm thick HPSC(High pressure steam cured) pre-primed , self embossed . textured designer board, water resistant termite resistant , fire resistant for insulation and acoustic purpose to be placed in the grid system duly suspended with 4mm dia GI bar hangers fixed with steel dash through fasteners from purlins of the roof with butterfly clips(Wt-0.007 Kg/clip)hold down clips (Wt-0.0035 Kg/clip) with Provn of light fixture complete all as specified and directed.

S&F 18 to 20 mm thick solid PVC Board for cupboard/cabinet shutters with one side 1 mm thick printed PVC sheet other side plain PVC sheet of approved pattern as per specification and drawing and including necessary beading in matching colour, magnetic ball catcher, 1 brass 2 lever lock of 50 mm size complete all as specified and directed.

M& solidL PVC SHEET wall paneling of thickness 5mm consisting of panels of desired size stuck on inner frame work of 50mm wide strips of 5mm thick prelam PVC sheet. The panel & strips shall be of 600 kg / cbm density manufactured by an ISO-9000 certified company. The strips should two PVC strips. The PVC strip shall be fixed to the wall using 65mm long M.S screws through the groove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200mm. A groove of 2mm may be left at the joint of two panels for aesthetic looks. The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall. Optionally a U Channel at top, bottom and side edges and strips of 5mm thick PVC sheet of width 75mm feathered at the edges shall be stuck at the places where two panels are joined, using solvent cement complete all as specified and directed (Note- Including all nesscesary fittings and scafolding for heighted site)

M&L for 25 mm thick PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate as in sub base of floors complete all as specified and directed.

M&L75mm thick PCC 1:3:6, type C2, using 40mm graded stone aggregates as in Plinth protection, platform and floor surface finished even & smooth without using extra cement complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in CM 1:4 complete complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in CM 1:4 complete complete all as specified and directed.

Srl item No. 52 above but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles with and including Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing), removing debrish and rubbish off the premises and stacking serviceable tiles complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 300 mm x 450 mm x 7mm / 350 mm x 450 mm x 7mm / 250 mm x 250 mm x 7mm thick as in vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match with and including 10 mm thick rendering in cement mortar 1:4 finished rough surface to receive tiles i complete all as specified and directed.

Virified Ceramic tiles 10 mm thick light shade (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed inwhite or colour cement to match including 15 mm thick screed bed in CM 1:6 with and including dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing), removing debrish and rubbish off the premises and stacking serviceable tiles complete all as specified and directed.

Srl item No 55 above but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

M&L for Screed bed 15mm thick in CM 1:4 finished even and smooth without using extra cement on roof mixed with water proofing compound as per manufacture instruction (WPC shall be measure and paid separaterly) etc complete all as specified & directed.

Taking down cement or cement lime plaster, any description on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc with and including removing of debrish taking down plaster out side MOD land complete all as specified and directed.

M&L for Rendering 15 mm thick on fair faces of concrete/brick surfaces in cement mortar 1:4 mixed with water proofing compound as per manufacturer's instruction, finished fair and even without using extra cement complete all as specified and directed. Note :- WPC shall be measured and paid for seprately as "supply only" under respective item of sch A/ BOQ.

M & L for 15 mm thick rendering on other than fair faces of brick work or concrete surfaces with cement mortar 1:6 finished even and smooth (without using extra cement) complete all as specified and directed.

M & L for 10 mm thick rendering on fair faces of brick work or concrete surfaces of ceiling in cement mortar 1:3 finished even and smooth (without using extra cement) complete all as specified and directed.

M & L for preparation of newly plastered surface and applying of Birla/JK white wall putty approx 1 mm thick in two layer as per manufacturer's instruction on newly prepared surface and make the surface smooth by rubbing with sand papers etcand applying two coat of oil emulsion distemper over a coat of primer complete all as specified and directed. complete all as specified and directed.

Prepration of new plaster surfaces of ceiling and applying three coat of white wash complete all as specified and directed.

M&L for Preparation of new plaster surfaces of wall and applying two coats of cement base paint etc complete all as specifed and directed.

M&L for preparing old surfaces of walls plastered or un-plastered by brooming down with steel or wire brush and scraping down smoke soot, moulds moss & efflorescent salt and trading oil and greasy spots , washing rubbing down and stopping of distempered and painted surface & removing all vegetation growth, nails and making good holes,cracks etc complete by necessary putty and make the surface smooth by rubbing with sand papers etc and applying one coat of distemper oil emulsion on old prepared surfaces of walls complete all as specified and directed.

M&L for complete removal of existing treatement by scraping, washing, rubbing down or stopping distempered or painted surfaces etc of walls plastered or un-plastered & removing all vegetation growth, cleaning & applying of Birla/JK white wall putty approx 1 mm thick in two layer as per manufacturer's instruction on existing prepared surface and make the surface smooth by rubbing with sand papers etc and applying two coats of oil emulsion distemper over a coat of alkali resistant primer complete all as specified and directed.

M&L for preparation of old painted surface wall / ceiling by brooming down loose partical, removing of smoke soot, moulds and unwanted vegetation from wall, facia, parapet etc applying one coat of cement base paint complete all as specified and directed.

M&L for complete removel of existing plastered or unplastered surfaces on wallsand make the surface smooth by rubbing with sand papers etc and applying two coat of cement base paint complete all as specified and directed.

M&L for complete removel of existing plastered or unplastered surfaces on walls and applying of Birla/JK white wall putty approx 1 mm thick as per manufacturer's instruction on newly prepared surface and make the surface smooth by rubbing with sand papers etc and applying Two coat of weather proof exterior paint silicon based over a coat of primer complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames glazed with putty or fixed with beads including punching or drilling out old glazing pins/spring clips etcwith and including, removing broken glass debris outside MOD Land at contractor is own arrangement complete all as specified and directed

S&F for 5.5mm thick, sheet glass,ordinary quality and glazing with beading (any type) or oil putty in square exc 0.5 sq. m in each pane, etc complete all as specified and directed.

S&F for 4.0mm thick, sheet glass,ordinary quality and glazing with beading (any type) or oil putty in square not exc 0.5 sq. m in each pane, etc complete all as specified and directed.

S&F 4.00mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed.

M&L for preparation of old surfaces of steel and iron work of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint on old surfaces in any tint complete all as specified and directed.

M&L for Preparation of new wooden surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for Preparation of old wooden surfaces over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.

S & F PVC (SWR) pipes 75mm bore, single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed.

S & F PVC (SWR) pipes 110 mm bore, single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed.

S&F PVC (SWR) bends any radius, with access door, for 75 mm bore of pipe complete all as specified and directed.

S&F PVC (SWR) bends any radius, with access door, for 110 mm bore of pipe complete all as specified and directed.

Taking out steel water tubing and connections including cleaning for refixing 15 mm dia complete all as specified and directed.

Taking out steel water tubing and connections including cleaning for refixing 20 mm dia complete all as specified and directed.

Taking out steel water tubing and connections including cleaning for refixing 25 mm dia complete all as specified and directed.

Supplying and laying 15mm nominal bore of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/wall complete all as specified.

Supplying and laying 20mm nominal bore of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/wall complete all as specified.

Supplying and laying 25mm nominal bore of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/wall complete all as specified.

S&F 15mm Brass Elbow complete all as specified and directed

S&F 20mm Brass Elbow complete all as specified and directed

S&F 25mm Brass Elbow complete all as specified and directed

S&F 15mm Brass Tee complete all as specified and directed

S&F 20mm Brass Tee complete all as specified and directed

S&F 25mm Brass Tee complete all as specified and directed

S&F 15mm Male Brass Threaded Adaptor (MTA/ MBTA) complete all as specified and directed

S&F 20mm Male Brass Threaded Adaptor (MTA/ MBTA) complete all as specified and directed

S&F 25mm Male Brass Threaded Adaptor (MTA/ MBTA) complete all as specified and directed

S&F 15mm Female Brass Threaded Adaptor (MTA/ MBTA) complete all as specified and directed

S&F 20mm Female Brass Threaded Adaptor (MTA/ MBTA) complete all as specified and directed

S&F 25mm Female Brass Threaded Adaptor (MTA/ MBTA) complete all as specified and directed

S&F 15mm dia CPVC union complete all as specified and directed

S&F 20mm dia CPVC union complete all as specified and directed

S&F 25mm dia CPVC union complete all as specified and directed

S&F in repair Chromium plated brass wall mixer 3-in-1 system fancy type with provision for both hand shower and overhead shower complete with wall Flange (without Hand & over head Shower) screwed down for 15 mm bore GI pipe complete all as specified and directed.

S&F in repair Chromium plated brass central hole Basin Mixer without Popup Waste system complete screwed down for 15 mm bore GI pipe complete all as specified and directed.

S&F in repair 15mm bore stop valve, cast copper alloy screwed down high pressure with crutch or butterfly handle chromium plated fancy type long shank and cup(concealed type), screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair 125 mm size chromium plated brass shower rose with swivel joints and swivel arms for fixing with 15 mm pipe complete all as specified and directed.

S&F in repair PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action type with inlet ball valve and float, handle with & including bracket and PVC flush pipe 32 mm bore complete all as specified and directed

S&F in repair 600 mm long 20mm dia brass chromium plated tubular towel rails, complete all as specified and directed.

S & F in repair 15 mm dia angle cock (two way) cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe for fixing of health faucet and PVC connections etc. complete all as specified and directed.

S&F in repair bib cock with flange , fancy type, brass,chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule or GI socket complete all as specified and directed.

S & F in repair pillar tap with capstan heads chronium palted screwed down high pressure with or without letter 'Hot' or 'Cold' with long screwed shanks and flynuts screwed for galvanised iron pipe and fixed complete for 15 mm bore complete all as specified and directed.

S&F in repair bib cock long body with flange , fancy type, brass,chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule or GI socket complete all as specified and directed.

Providing and fixing in repair sheet glass corner shelf assembly consisting of 5.5mm thick sheet glass shelf with chromium plated bracket guard and railing as per sample approval complete all as specified and directed.

S&F in repair 15mm size PVC connections internally threaded with PVC washer,PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair PVC Waste pipe to WHB/ kitchen sink of 32 mm dia complete all as specified and directed.

S&F in repair white vitreous China wash down water closet pan (pedestal) pattern, and trap (excluding fixing bolts, flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc. with and including plastic water closet sheet covers white closed pattern with flat bottom, with mild steel chromium plated or aluminised hinging device and 15mm dia chromium plated brass washing jet fixed to water closet with 15mm dia and 1.2m to 1.5m long flexible pipe with chromium plated spring type cover with and including removing unserviceable water closet outside MOD land complete with fixing arrangement fancy look complete all as specified and directed.

S&F in repair vitreous china squatting pan Orissa pattern size 580 x 440 mm white with front or back inlet, integral foot rest (excluding flushing cistern and flush pipe) & including CI trap & connecting fitting as required set in plain cement concrete (1:3:6) type C-1 and connecting to flusing cistern and trap & connecting fittings as required and making good to floor as per existing with and including removing unserviceable water closet outside MOD land complete all as specified and directed.

S&F in repair vitreous china wash hand basin (flat back) of size 550x400mm including one number chromium plated waste fittings, 32 mm dia, brass with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, with & including 32 mm dia PVC waste pipe with connector, MS brackets 2 numbers including cutting for and pinning in ends of brackets with and including removing unserviceable W.C outside MOD land complete all as specified and directed.

S&F in repair Vitreous China urinals, half stall type white urinal, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.

S&F in repair fancy type chromium plated health faucat with 1.50 metre long PVC tube cover CP flexible with wall hook suitable for 15 mm bore iron pipes or for unions and fixed complete all as specified and directed. Make-Prayag or other equivalent makes as approved by GE.

S&F in repairs 15mm size concussive push button taps of cast copper alloy, screwed for iron pipe and fixed all as specified and directed.

S&F in repairs plastic water closet seat cover , whiteor tinted, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm with & including one waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement ,with PVC coupling, PVC waste pipe 40mm bore 750mm long complete all as specified and directed. Make as approved by GE.

S&F in repairs Stainless steel utencil plate rack size 600 mm x 600 mm x 250 mm ) using 0.8 mm thick sheet complete all as specified and directed.

Disconnecting & taking down existing water tank of capacity exc 250 liter and not exc. 500 liter and removing from site complte and S&F rotational moulded polyethylene water storage tanks 500 lts capacity (cylindrical vertical with closed top) hoisted with and including 25mm dia ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or for brass ferrule and fixed in position all as per SSR Part I complete all as specified & directed.

Disconnecting & taking down existing water tank of capacity exc 250 liter and not exc.100 liter and removing from site complte and S&F rotational moulded polyethylene water storage tanks 1000 lts capacity (cylindrical vertical with closed top) hoisted with and including 25 mm dia ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or for brass ferrule and fixed in position all as per SSR Part I complete all as specified & directed.

S&F in repair 25 mm bore dia of pipe gun metal globe of gate valves with iron wheel head screwed both endds for iron pipe and dixed complete all as specified and directed.

S&F in repair 20 mm bore dia of pipe gun metal globe of gate valves with iron wheel head screwed both endds for iron pipe and dixed complete all as specified and directed.

S&F brass spindles for taps/cocks any type any size complete to change and refixing of taps/cocks after replacement of spindles complete all as specified and directed.

Demolition of brick or stone boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone works and precast concrete articles with and including, removing debris outside MOD Land at contractor is own arrangement complete all as specified and directed

Demolition of cement concrete (unreinforced) of any description as in ground floors and pavings not exceeding 15cm thickness (above or below ground floors) with and including, removing debris outside MOD Land at contractor is own arrangement complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing with and including, removing debris outside MOD Land at contractor is own arrangement debrish and rubbish off the premises and stacking serviceable tiles complete all as specified and directed.

Dismantling of wall and ceiling boards any thickness including cover filletes with and including, removing debris outside MOD Land at contractor is own arrangement complete all as specified and directed

Taking down Cast iron/PVC pipe of any dia and size fixed on wall or floor including all fittings and removing of debrish to Note: (Debris will be removed out sideMOD Land at contractor is own arrangement complete all as specified and directed.

Demolition of ( reinforced cement concrete) (reinforcement cut as required to facilitiate demolition) of any description and in any positionnot otherwise specifically provided for with and including, removing debris outside MOD Land at contractor is own arrangement complete all as specified and directed

KISHORE ENTERPRISES (BID ID -3232790)

OM TRADERS (BID ID -3232272)

M/s MAA SHAKTI CONSTRUCTIONS AND SUPPLIERS (BID ID -3233058)

M/S P K ARORA (BID ID -3230094)