PROVN OF 01 X MULTIPURPOSE SHED WITH PARTITION AND FALSE CEILING AT DAKSHINESWAR, PROVN OF LIGHTENING CONDUCTOR TO BLDG NO PB 35 OFFICE COMPLEX AT TECH AREA OMC, PROVN OF 14 NOs GEYSER IN BLDG NO OTM 08, OTM 28 ( FOR 14 x SINGLE OR BATHROOM) AT 2 CBP

Amount

Surface excavation n.exc.30cm deep and averaging 15cm deep and getting out in Soft/loose soil complete all as specified & directed.

Excavation in trenches, not exceeding 1.5 m wide or not exceeding 10 sqm on plan and not exceeding 1.5 m in depth for foundation etc and getting out in Soft/loose soil complete all as specified & directed.

Material and labour for providing cement concrete 1:4:8 type D2 ( using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified & directed

M&L for reinforced cement concrete M-25(design mix) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for reinforced cement concrete M-25(design mix) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for reinforced cement concrete M-25(design mix) as in columns, pillars, piers,posts and struts etc complete all as specified and directed.

M&L for reinforced cement concrete M-25(design mix) as in chajjas and like complete all as specified and directed.

M&L for reinforced cement concrete M-25(design mix) as in slabs supported on walls, beams, columns, in floors, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.

M&L for use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work; not exceeding 200mm thick ( horizontal or sloping) complete all as specified and directed.

M&L for use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits(if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

M&L for use and waste of formwork to sides and soffits of floor beams and roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhang, etc. also splays between floor and beams etc. complete all as specified and directed.

M&L for use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions, complete all as specified and directed.

M&L for use and waste of formwork to chajjas, through and similar items including edges, complete all as specified and directed.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per item no 14 above but 5mm dia and over upto and including 10mm dia in stirrups,spacers and binders complete all as specified and directed.

Material and labour for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed.

Material and labour for Brickwork with fly ash bricks, straight or curved on plan to any radius as in half brick thick walls, built in cement mortar (1:4) complete all as specified and as directed.

Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and directed.

Material and Labour for 20 mm thick rendering with CM 1:4 in two layers, 10 mm thick in each layer and mixed with integral water proofing liquid admixture on top layer of external surfaces of brick work or concrete surfaces including finish the surface even and fair complete all as specified and as directed. ( Note: Water proofing liquid admixture shall be measured and paid seperately )

Supply only integral water proofing liquid admixture for concrete / mortar (Make: CONPLAST X421IC of Fosroc/ PLASTOCRETE PLUS of SIKA or equivalent brand of PIDILITE)

Material and labour for preparation of newly plastered surfaces of wall by vaccume based sanding machine and applying 3mm thick wall care putty(Multipurpose mixer shall be used for uniform and proper mixing of putty) and applying two coats of emulsion distemper white or coloured by using Auto Roller complete all as specified and as directed as per manufacturers instructions.

Material and labour for preparation of newly plastered surfaces of wall by vaccume based sanding machine, and applying two coats of Anti Fungal paint white or coloured by using Auto Roller, including necessary scaffoldings complete all as specified and as directed as per manufacturers instructions.

Returning filling in, including spearding levelling watering and well ramming in layer n. exc. 25 cm in soft/loose soil complete all as specified & directed.

Removing excavated soil n.exc 50 mtr and deposited where directed at a level n.exc 1.5 m above the starting point complete all as specified .

M&L for Hardcore of gauge exc.63mm but not exc.100mm, deposited, spread and levelled in layers n.exc.15cm thick, watered, well rammed to a true surface complete all as specified and directed.

M&L for sand filling under floors or in foundations including watering and consolidation, complete all as specified and directed.

M&L for 100mm thick cement concrete 1:4:8 type D2 ,(using 40mm graded stone aggregate) as in sub base of floors etc complete all as specified and directed.

M&L for 40mm thick cement concrete 1:2:4 type B1 ,(using 20mm graded stone aggregate) as in floors etc complete all as specified and directed.

Material and labour for Light shade Vitrified tiles 10mm thick (square/rectangular) polished, area of each tiles exc. 0.18 sqm but n.exc. 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of the tiles over and including 20mm thick screed bed or bedding layer in CM(1:6) complete all as specified and as directed.

Material and labour for Light shade Vitrified tiles 10mm thick (square/rectangular) polished, area of each tiles exc. 0.18 sqm but n.exc. 0.36 sqm as in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of the tiles over and including 10mm thick rendering in CM (1:4) complete all as specified and as directed.

Material and labour for 75mm thick PCC (1:4:8) type D2 using 40mm garded stone aggragate as in foundation, filling, sub base of floors etc complete all as specified and as directed.

M&L for pre-polished designer cement concrete tiles 30cm x 30cm x 25mm thick (factory made), over 20 mm thick screed bed or bedding layer of mortar in CM (1:6) for laying floor finishes set, jointed with grey cement and pigment and pointed with neat cement slurry as in floors complete all as specified and directed.

Supplying and fixing 12mm thick false ceiling with semi perforated at all heights with GRG(Glass fibre reinforced Gypsum) false ceiling tiles of size 595x595mm of approved texture design and pattern having moisture content less than 2%, humidity resistance of 99% NCRCO 0.50 TO 0.75 AS PER is 8225;1987, Non combustible as per BS 476N(Part-4)-1970 and light reflectance of 85%(minimum) to be laid in true horizontal level suspended on interlocking matel T-grid of hot dipped galvanized iron section of 0.33mm thick (galvanised @120grams per sqm including both sides) comprising of main T runners of size 15x32mm of length 3000mm cross T of size 15x32mm of length 1200mm and secondary intermediate cross-T of size 15x32mm of length 600mm to form grid mould of size 600mmx600mm, suspended from ceiling using galvanised mild steel Items (galvanised@80grams per sqm) i.e. 50mm long ,8mm outer diameter M-6 clash fastners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjustner of size 85x25x2mm, Galvanized iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall/partitions with the help of plastic rawl plugs at 450mm centre to centre and 40mm long dry wall wood screws complete all as specified and directed.

S&F mild steel rolled section of grade Fe-410W(Gde E-250) quality A as in main and cross beams hip and jack rafters, purlins where connected to common rafters and running rails and fixed with angle cleats or other connecting plates by welding complete all as specified and directed.

Supply and fix Rolled mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St-240 complete all as specified and as directed.

Supply and fix of pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Supply and fix 2nd class hard wood, plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.

Supply and fix 35mm thick 2nd class hard wood factory made plain framed panelled door shutters, (two panel) with lock rail and panel of 12mm veneered particle board with commercial veneered on both faces and rail and stiles as per IS 1003(Pt-I), kiln seasoned and chemically pressure treated etc. complete all as specified and as directed.

Supply and fix powder coated aluminium frame for doors, windows, ventilators(including 2/3 track) with one or more rebates including jointing cleats for fixing etc complete all as specified and directed.

Supply and fix rolled mild steel, Fe-410-w (grade E-250) quality A, framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work complete all as specified and as directed.

Supply and fix 4mm thick sheet glass ordinary quality, glazing with aluminium beads in square/rectangular not exceeding 0.5 Sqm in each pane fixed to aluminium frame complete all as specified and as directed.

Supply and fix mild steel work as in hold fast or similar article conforming to Fe-410-0 or Fe-310-0 including tarring and sanding complete all as specified and as directed.

Supply and fix 100 mm size stainless steel butt hinges, medium weight fixed with cadmium plated screws complete all as specified and as directed.

Supply and fix 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed.

Supply and fix 150mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

Supply and fix 150mm size extruded aluminum alloy handle fabricated type anodized (ISI Marked) complete all as specified and as directed.

Material and labour for two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer to new steel surface including preparation of surfaces exceeding 10cm with or girth complete all as specified and as directed.

Material and labour for two coats of synthetic enamel paint over a coat of pink primer to new wooden surfaces of any description over 10cm width or girth including preparation of new surfaces complete all as specified and as directed.

Material and labour for providing cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in coping including weathering, slightly rounded or chamfered angles and necessary formwork complete all as specified and as directed.

Supply and fix in repair 25mm dia powder coated aluminium curtain rod fancy type( length from 0.90m to 1.5m)with fancy type end side brackets and fancy type hanging brackets complete all as specified and as directed.

Material and labour for Non-skid ceramic coloured tiles of 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed or bedding layer in CM(1:6) complete all as specified and as directed.

Material and labour for glazed ceramic colour tiles 350x 250x 7 mm/ 450X 350X 7mm thick in skirting/dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour tiles over and including 10mm thick rendering in CM(1:4) complete all as specified and as directed.

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube with EPDM gasket as per specification and drawing complete all as specified and as directed.

Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, as per specification and drawing complete all as specified and as directed.

Supply and fix 15mm bore medium grade galvanized steel tubes with all fittings and fixed to wall or in floors etc complete all as specified and directed.

All as per item No. 55 above but 20mm dia complete all as specified and directed.

Supply and fix vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including 'P'or 'S' trap (excluding flushing cistern and flush pipe) including provision of lime concrete bedding complete all as specified and as directed.

Supply and fix vitreous China wash basin white flat back, size 630 x 400 mm including PTMT waste coupling 32mm dia (min wt 45 gm), 15mm bore PTMT pillar tap,chain and plug and porcelain stopper etc. complete all as specified and as directed.

Supply and fix 10 litre capacity PVC valve less, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern including PVC connections 15mm size with PTMT nuts and washer both side of length 450mm complete all as specified and as directed.

Supply and fix chromium plated shower arm 400x25x25mm square shape for wall mounted shower with flange for fixing in 15 mm dia pipe complete all as specified and as directed.

Supply and fix chormium plated shower 105mm dia round shape single flow with air effect (ABS body and face plate chrome plated with rubit cleaning system) for fixing in 15 mm dia pipe complete all as specified and as directed.

Supply and fix glass shelf 600mm long complete all as specified and as directed.

Supply and fix Brass chromium plated Tubular Towel Rail , 20mm dia, D type, 600mm long between flange fixed with chromium plated brass screws complete all as specified and as directed.

Supply and fix PVC connection 15mm size with PTMT nuts of length 600 complete all as specified and as directed.

S & F Rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top) 1000 Ltr Capacity(multi layered), hoisted and fixed in position complete all as specified and directed.

Supply and fix 20mm bore Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and as directed.

Supply and fixing Gun-metal, globe or gate valves size 20 mm dia, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

Supply and fix 100mm cast iron Nahani trap, with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B1 complete all as specified and as directed.

Supply and fix bib tap of 15mm bore fancy type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule complete all as specified and as directed.

Supply and fix angular stop cock of 15mm bore fancy type, chromium plated cast copper alloy, screwed down, high pressure, with crutch handle, screwed both ends for brass ferrule complete all as specified and as directed.

Supply and fix pillar cock of 15mm bore, cast copper alloy with capstan heads fancy type, chromium plated screwed down, high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

M&L for Salt glazed stone ware drain pipes laid in trenches and jointed as specified 150mm dia.complete all as specified and as directed.

M&L for cement concrete 1:3:6 type C-2(using 40 mm graded stone aggregate) bed to drain pipes including packing under & haunching against the sides of pipes after they are laid & tested for 150 mm dia pipe complete all as specified and as directed.

Cutting into exisiting manholes for connecting new drain pipes, making good to pipe and rendering,cutting out existing benching for and forming branch channel ( 1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required complete all as specified and as directed.

Material and labour for point wiring (Concealed type) with PVC insulated FRLSH cable 1100 volts grade unsheathed single core multi-stranded copper conductors 1.5 sqmm (nominal area) for phase, neutral and 1.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC conduit (medium grade) of adequate size with fittings and accessories pressed steel sunken terminal box made out of 1.6 mm thick MS sheet duly painted with two coats of synthetic enamel paint of approved colour over a coat of red oxide zinc chrome primer and covered with 3 mm thick laminated sheet cover for fixing switches, sockets, regulator etc and earth continuty conductor shall be connected to common earth and earth dolly for one light/fan point controlled by one way switch complete all as specified and as directed. (Note: Chases cutting and making good the disturbed surfaces shall deemed to be included in the quoted rate)

All as per item No 76 here in above but for One 3/5pin 6 Amp Socket outlet on the independent board complete all as specified and as directed.

All as per item No 76 here in above but for One 3/5pin 6 Amp Socket outlet on the same board with other switches complete all as specified and as directed.

All as per item No 76 here in above but for One call bell point controlled by one bell push switch complete all as specified as directed.

All as per item No 76 here in above but for one 15 Amps socket outlet using 2.5 sqmm copper conductor with 2.5 sqmm copper conductor as earth continuity conductor complete all as specified as directed.

Material and labour for sub-main wiring (Concealed type) with two run of PVC insulated,unsheathed,FRLSH single core,multistranded copper conductors of size 6.0 Sq mm and one run of 6.0 Sqmm copper conductor as continuity earth wire, drawn through and including PVC conduit (medium grade) of adequate size with fittings and accessories as required at site and taking down old sub main wiring with conduit complete all as specified and as directed. Note:- (i):Two run of 6.0 sqmm and one run of 6.0 sqmm copper conductor ( for Phase,Neutral and Earth)+One run PVC conduit shall measured as one unit). (ii)Cost of cutting of wall, if any, for housing of GI box and also making good the disturbed surfaces are deemed to be included in unit rate.

Supply and fix switch piano flush button 5/6 Amp single pole, one way complete all as specified and as directed.

Supply and fix socket outlet 5 Pin, 5/6 Amps flush type complete all as specified and as directed.

Supply and fix switch socket combination 5 Pin, 5/6 Amp flush type complete all as specified and as directed.

Supply and fix switch socket combination 5 Pin 15/16 Amp flush type with complete all as specified and as directed.

Supply and fix electronic fan regulator stepped type flush type AC 240 volt complete all as specified and as directed.

Supply and fix ceiling rose surface bakelite, three terminals complete all as specified and directed.

Supply and fix PVC poly carbonate round block 10 cm dia complete all as specified and directed.

Supply and fix bell push, flush type 6 Amps complete all as specified and directed.

Supply and fix call bell musical type, AC, 230V single pole complete all as specified as directed.

Supplying & fixing LED tube light fitting, 1 x 18 watt bipin holders, connector block etc. complete with and connecting the same to ceiling rose with using copper conductor 23/0.0076 flexible twisted twin core cable ,and fixing the light fitting to walls / roof complete all as specified & directed.

Supply and fix lamp holder insulated body with back plate for angle/batten fittings complete all as specified and directed.

Supply and fix LED bulb, 10 watt, self ballasted rectrofit type lamp with PBT body shell and DC diffuser CCT 6500K with fittings complete all as specified and as directed.

Supply and fix LED light fitting mirror type high output diffuser 2 ft ,10 watt, 220 volt AC decorative type with driver holder and led lamp including connecting up with three core flexible copper conductor cable of sutiable size complete all as specified and as directed.

Supply and fix powder coated sheet metal enclosure (in concealed) single pole & neutral for DBs (Double door) 8 way, 240 V with 200 amps rated busbar DIN channel, neutral link & earth link superline complete all as specified as directed.

Supply and fix MCB single pole & neutral / Double Pole 6 to 32 amps, 240 volts, 10 KA, 'C' series with all incoming / outgoing connections with proper size of aluminium lugs complete all as specified as directed.

Supply and fix MCB single pole 6 to 32 amps, 240 volts, 10 KA, 'C' series with all incoming / outgoing connections with proper size of lugs complete all as specified as directed.

Supply and fixing LED building security light fitting 35 watt outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corroson resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, and accessories, 230 V, 1200 mm sweep. Min air delivery 220 CFM with BEE 5 star rating along with electronic regulator & operated with brushless direct current motor (BLDC) complete all as specified and as directed. (Make: Havells/Usha/ Crompton/ Bajaj)

Supply and fix wall mounted fan heavy duty aluminium blade for higher air delivery, sleek and stylish design with smooth oscillation, AC single phase, 230V , 400mm sweep size complete all as specified and directed. (Make: Usha/ Bajaj/ Havells/Crompton)

Supply and fix electric water heater, storage type, steel body with copper inner tank and heating elment upto 2 KW, capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and as directed. (Make: Bajaj/ Venus/ Havells)

Supply and fixing Air termination single pointed aluminium rod 12mm dia and 300mm long with base plate including nuts and bolts etc. suitable for fixing on shed/wall complete with clamps and all accessories all as specified and as directed.

Supply and fixing of aluminium strip size 25x3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground fixed to roof by means of stand of hold fast placed on PCC blocks/insulated blocks and fixed to walls/ parapet on insulated saddles complete all as specified and as directed.

S & F Test point terminal block made of gun metal or phosphorous bronze size 75x75x25mm drilled and screwed including 3 nos of 8mm dia 25mm long hexagonal head brass screw complete all as specified and as directed.

Supply and fixing GI strip size 32x6.0mm burried in ground 150mm below normal GL including connecting up with earth electrode plates of earthing on both ends with GI nuts, bolts and washer in addition to welding including excavation, filling etc complete all as specified and as directed.

Supply and fix exhaust fan made of sturdy engineering plastic complete with louvers shutters 250 mm sweep, 230V, AC 50 Hz, copper winding and mounting accessories all as specified and directed.

Material and labour for earthing with galvanized steel earth plate electrode 600 x 600 x 6 mm thick, buried directly in ground ( earth pit not less than 2.25 mtrs deep below GL) with top edge of the plate not less than 1.5 mtrs below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel, earth lead wire protected by and including 15mm dia GI pipe (Light grade) and 20mm dia GI pipe (medium grade) with Funnel for watering and connected to control switch as directed including necessary earthwork as in soft/loose soil, concrete pit in PCC (1:3:6) type C1, pre cast RCC (1:1.5:3) type A1 cover slab duly reinforced with 8mm dia TMT bar @ 150mm C/C both way and two Nos lifting handle made of 8mm dia TMT bar and set in cement mortar (1:4), funnel, wire mesh, char coal or coke and salt in alternate layer, testing, etc complete and as specified in electrical plate No 3 of SSR Pt I complete all as specified as directed

Cutting existing 40mm bore steel tubing for alterations or additions (Each cut measured)complete all as specified as directed.

Screwing existing 20mm bore steel tubing for alterations or additions (or lengthening screw on pipe to form connector) complete all as specified as directed.

Supply and fix 20mm bore medium grade galvanized steel tubes with all fittings etc and laid in trenches complete all as specified and directed.

Material and labour for earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6mm buried directly in ground vertically to a depth not less than 2.25 meter below normal ground level (with top edge of earth plate not less than 1.5 meter below ground level) connected to galvanized iron strip 32x6mm (main earthing lead) by means of galvanized bolts, nuts and washers all as shown in electrical plate no 3 with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt around earth plate and GI pipe 20mm dia light grade for watering pipe with funnel & wire messn including necessary earthwork and PCC (1 : 3 : 6) type C-1 for earth pit and 40 mm thick pre-cast RCC cover in 1 : 1.5 : 3 type A1 with 8mm dia TMT bars both ways complete all as specified & directed.

Supply and fix GI pipe 40 mm bore (dia), light grade for fixing up of the air termination rod including necessary clamps etc complete all as specified and directed.

Supply and fix 15mm bore medium grade galvanized steel tubes with all fittings etc and laid in trenches complete all as specified and directed.

Material and labour for point wiring (surface type) with PVC insulated 1100 volts grade FRLSH unsheathed single core multi-stranded copper conductors 4.0 sqmm (nominal area) for phase, neutral and 4.0 sqmm PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC casing-N- caping (medium duty) double lock type,size of casing caping as required at site but not less than 20mm with fittings and accessories pressed steel sunken terminal box in concealed made out of 1.6 mm thick MS sheet duly painted with two coats of synthetic enamel paint of approved colour over a coat of red oxide zinc chrome primer and covered with 3 mm thick bakelite sheet cover for fixing switches, sockets, regulator etc and earth continuty conductor shall be connected to common earth and earth dolly for one water heater point controlled by one 16 Amp switch complete all as specified and as directed.

Supply and fixing single pole and neutral enclosure with a two pin earth plug and socket complete with one single pole MCB with rating 20 amps complete all as specified and directed.

Supply and fix Modular switch 1 way 6 A, 1 module complete all as specified and directed.

Supply and fix Modular switch 1 way 16A, 1 module complete all as specified and directed.

Supply and fix Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed.

Material and labour for sub-main wiring (Concealed type) with two run of PVC insulated,unsheathed,FRLSH single core,multistranded copper conductors of size 4.0 Sq mm and one run of 4.0 Sqmm copper conductor as continuity earth wire, drawn through and including PVC conduit (medium grade) of adequate size with fittings and accessories as required at site and taking down old sub main wiring with conduit complete all as specified and as directed. Note:- (i):Two run of 4.0 sqmm and one run of 4.0 sqmm copper conductor ( for Phase,Neutral and Earth)+One run PVC conduit shall measured as one unit). (ii)Cost of cutting of wall, if any, for housing of GI box and also making good the disturbed surfaces are deemed to be included in unit rate.

Supply and fix powder coated sheet metal enclosure (in concealed) single pole & neutral for DBs (Double door) 4 way, 240 V with 200 amps rated busbar DIN channel, neutral link & earth link superline complete all as specified as directed.

Supply and fix exhaust fan 300 mm sweep, metal body, 230V, AC 50 Hz, copper winding and mounting accessories complete all as specified and as directed.

Supply and fix exhaust fan 250 mm sweep, metal body, 230V, AC 50 Hz, copper winding and mounting accessories all as specified and directed.

AMR TRADERS (BID ID -3078566)

M/s.Tarun Construction (BID ID -3084505)

Bharat Udyog (BID ID -3085163)

bansal construction (BID ID -3092748)

City Constructie Pvt Ltd (BID ID -3086333)

Allied Trading Company (BID ID -3078183)