RequiredExperience with Government
RequiredAnnual Turnover
RequiredOEM Authorization Certificate Tractor Trailer Mounted Suction Cum Jetting Machine ( 1 ) ( Under PAC ) Make na Model a2z_tjmachine Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) Certification Trailer confirming to IS 8213:2000 (latest) and AIS 112 (latest) Yes * 1/8 Conforming to IS:13496 for Suction Machine for cleaning Sewers
RequiredManholes and ancillary structures provided on sewer line and closed storm water drains Yes * Conforming to IS:11387 for high pressure jetting machine for sewer cleaning Yes * Necessary clearance from RTO to be obtain before supply of Trailer mounted Suction cum Jetting Machine Yes * Form 22 A - For compliance with pollution standards
Requiredsafety standards of components and road worthiness as per CMVR Rules Yes * Availability of test reports for all critical components from the manufacturer or OEM of Jetting Pumps
Requiredvacuum pumps
Requiredpower takeoff unit
RequiredJetting Hose etc shall be from any ILAC/NABL accredited/Central Govt Lab To be furnished to buyers on demand Yes * Avaliability of Test report fron approved Laboratory to prove conforming to specification as per AIS 112 for trailers to be furnished to buyer on demand Yes * Generic Parameters Type of Trailer mounted machines Suction cum jetting * GVW of Trailer 9 Any applicable numeric value Wheel base 2650 Any applicable numeric value Payload capacity of trailer 3000 Any applicable numeric value 2/8 Make and Model of Vacuum Pump 9 * Make and Model of Jetting Pump 2650 * Make and Model of Jetting Hose 3000 * Make and Model of PTO JUROP/SIMILAR * Make and Model of Hydraulic Motor HAWK/SIMILAR * Make and Model of Hydraulic Pump DANFORCE * Make and Model of Suction Hose RAY * Make and Model of Jetting Nose RAY * Mount Type Tractor Trailer mounted * Constructional Parameters Capacity of split shaft PTO (Kgm) 280 Any applicable numeric value Overall Length 4695 Any applicable numeric value Overall Width 1880 Any applicable numeric value Equipment Length 1490 Any applicable numeric value Equipment Height 1260 Any applicable numeric value Equipment Rear Over Hang No Yes
RequiredNo If Yes
RequiredDeclare Equipment Rear Over Hang 0 Any applicable numeric value Derrick Arm Available Yes Yes
RequiredNo Vacuum Pump - Rotary Vane/Sliding Vane Yes * Vacuum Pump Flow (Cu-m/hr) 319 Any applicable numeric value Vacuum Pump Power 167 Any applicable numeric value Rated RPM at Max Vacuum Pump Power 220 * Vacuum Relief Valve Size 6 * Vacuum Suction Depth (as per 8 Above 8 3/8 IS:13496 latest) Suction Hose - Lightweight
Requiredheavy duty
Requiredreinforced
RequiredPVC along with quick connect coupling arrangement Yes * Suction Hose Internal Diameter (as per IS:13946 latest) 90 Any applicable numeric value Suction Hose Length 15 Above 3 Number of Suction Hose (Nos) 5 Above 5 Safety Equipments YES * Silencer/Filter(Micro Strainer) Yes * Exhaust Silencer and injection cooling air Inlet Silencer/Filter Yes * Blower Outlet and Air- Exhaust Silencer Yes * Check valve Yes * Vacuum Limitation Valve Yes * Drain Off valve Yes * High Pressure Jetting Pump With pressure regulating Arrangement Yes * Jetting Pump - Triplex plunger reciprocating pump Yes * Working Pressure Range of Jetting Pump 200 140 - 220 Water Flow for Pump of Jetting Machine (LPM) 220 Above 220 Pressure Relief Valve Size 80 * Jetting hose inner Diameter (Capable of withstanding one point five times the maximum pressure generated by the pump) 22 Any applicable numeric value 4/8 Jetting Hose Length 80 60
Required80
Required100
Required120
Required140 Number of Nozzles for removing Blockage (Conical Head) 1 * Number of Nozzles for Flushing Sewer lines( Round Head) 1 * Number of balanced Nozzles for dry silt 1 * Total Tank Capacity (sludge tank+water tank) 3000 2000 - 8000 Water storage Tank Capacity 3000 Above 500 Sludge Storage Tank capacity 3000 Above 1000 Maximum working pressure of Jetting Hose 160 Above 160 Minimum Burst pressure of Jetting Hose 440 Above 430 Thickness of tank plate (It shall be designed at a safety factor of 4 times the operating pressure)as per IS 13496 3 Any applicable numeric value Material of tank Mild Steel (Grade-A) Confirming to IS 2062 latest * Surface preparation and finish of tank's Exterior - sanded prior to spray painting and spray painted with two coats of superior quality anti corrosive primer and two coats of enamel metal paint Yes * Surface preparation and finish of Tank's Interior - clean water two coats anti corrosive primer & two coats of grey enamel paint & Sludge shall be with two coats of epoxy paint to resist corrosion Yes * 5/8 Provision for locking and unlocking arrangement of rear gate of tank
Requiredto be operated hydraulically for quick tipping and cleaning Yes * Hose Reel Drive operated by hydraulic motor Yes * Dished Head Yes * Tank Rear Door Opening by hydraulic system Yes * Reinforcement rings in pipes Yes * Hydraulic Pump Type Gear Type * Water Level Indicator Type (with safety coverage) YES * Water Level Indicator Nos 2 * Thickness of Cover for Engine
RequiredPump and Hose Reel compartment 4 Above 3 Material of Cover for Engine
RequiredPump and Hose Reel compartment MS Sheet Galvanised IronSheet
RequiredMS Sheet Full bore Quick Acting Valves in the sewage path Yes * Air Pumps to safeguard the pump from overloading Yes * Make and Model of Air Pump GURUNANAK * Sludge Trap between the Air Pump and the Tank Yes * Float cut out valve to seal the pump suction line Yes * Lubricating system for reducing friction loss Yes * Three sewer cleaning nozzles with varying rearward angles Yes * 6/8 One nozzle extension for easy fixing of the hose and the nozzle Yes * Two stop tank strainer elements Yes * Two sets of operation and service manuals and spare parts lists Yes * Hose guide Yes * Counter Yes * Performance Parameters Warranty Time 24 Above 24 Warranty Distance 12000 Any applicable numeric value No of Free Service (with consumable) 6 * * Bold specifications are the golden parameters.
