WELCOME MAINTENANCE INCLUDING INTERNAL ELECTRIFICATION TO OFFRS MD ACCN IN SOUTHERN SECTOR AT MIL STN KOTA

Amount

Demolition of cement concrete (unreinforced) in ground floor and pavings n.exc 15 cm thickness (below or above GL), complete all as specified and directed.

Dismantling floor, hearth or wall tiling/ terrazzo including cement mortar bedding (but not backing), removing tiles and rubbish off the premises, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips complete all as specified and directed.

Taking down cement plaster any description/thickness on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L 100 mm thick PCC 1:4:8 type D-2, using 40 mm graded stone aggregate, as in sub base of floors etc, finished surface even and fair complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size made with grey cement and pigment, confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, laid over and including 25 mm thick sand cushioning, complete all as specified and directed.

M&L chequered cement concrete tiles 30 cm x 30 cm by 25 mm thick, set jointed and pointed in neat cement slurry with grey cement and pigments as in floors, laid over and including 20 mm thick screed in CM 1:6, complete all as specified and directed.

M&L for laying vitrified unfinished paving tiles of size 300x300x10mm thick suitable for exterior areas, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the colour of tiles, laid over and including 15 mm thick screed in CM 1:6, complete all as specified and directed.

M&L for joint free non skid ceramic coloured tiles, 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles, laid over and including 15 mm thick screed bed in CM 1:6, complete all as specified and directed.

M&L Glazed ceramic coloured tiles on vertical surfaces 350x250x7 mm/450X350X7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, laid over and including 10 mm thick rendering in CM 1:4, complete all as specified and directed.

M&L for light shade coloured vitrified tiles, 10mm thick (square/rectangular) area of each tile exceeding 0.36 Sqm but not exceeding 0.42 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles, laid over and including 15 mm thick screed bed in CM 1:6, complete all as specified and directed.

M&L in renewal of black granite stone slabs, bright finished 20mm thick machine cut fixed as in cooking platform and the like, laid over and including 20 mm thick screed bed or bedding layer of 1:6, bedded and jointed with grey cement slurry and pointed in white cement mixed with pigment to match the shade of granite stone including cutting, polishing, rounding of exposed edges, complete all as specified and directed.

M&L for rendering 15 mm thick on stone masonry surfaces or on other than fair faces of brick/PCC block masonry in cement mortar 1:6, surface finished even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surface in cement mortar 1:4, surface finished even and smooth without using extra cement, complete all as specified and directed.

M & L for plastering 5mm thick on concrete surface of ceiling in CM 1:3, finished even and smooth without using extra cement complete all as specified and directed.

M&L preparing newly plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of primer, complete all as specified and directed.

M&L preparing newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer, complete all as specified and directed.

M&L for applying three coats of white wash on ceiling including preparation of new or previously untreated surfaces, complete all as specified and directed.

M&L preparing old previously treated plastered surfaces of ceiling and applying one coat of white wash, complete all as specified and directed.

M&L preparing old previously treated surfaces of walls, plastered or unplastered & applying one coat of cement based paint (of approved tint) on walls including cornices, pillasters etc, complete all as specified and directed.

M&L preparing old previously treated surfaces of walls, plastered or unplastered & applying one coat of distemper oil emulsion (washable) on walls including cornices, pillasters etc, complete all as specified and directed.

M&L complete removal of existing treatment from walls, plastered or unplastered & over it applying two coats of acrylic smooth exterior paint of required shade : New work (applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.

M&L for complete removal of existing treatment from old previously treated plastered wall surfaces and washing, rubbing down and preparing surfaces and applying two coats of cement based paint over & including a coat of suitable primer, complete all as specified and directed.

M&L complete removal of existing treatment from walls and applying 2 mm thick smooth layer of wall care putty and over it applying two coats of distemper oil emulsion (washable) over a coat of primer, complete all as specified and directed.

M & L for preparation of old painted wood/wood based surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint 1st grade quality, complete all as specified and directed.

M & L for preparation of old painted steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint 1st grade quality, complete all as specified and directed.

S&F in renewal of 15mm bore stop valve cast copper alloy, CP fancy type, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union, complete all as specified and directed.

S & F in renewal of Vitreous China wash down water closet pan (pedestal pattern), white, with ‘P' or ‘S' trap & including plastic water closet seat, black, closed pattern with recessed bottom and cover and mild steel chromium plated or aluminised hinging device & including making good to floor (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed.

S&F in renewal of vitreous china wash hand basin white with flat back of size 580x450 mm, excluding chain and plug, taps and porcelain stopper but incl PVC waste pipe & coupling of 32 mm bore & a pair of cast iron brackets of appropriate size, complete all as specified and directed.

S&F in renewal of pillar taps, cast copper alloy, with capston heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed.

S&F in renewal of PVC connection 15mm size with PTMT nuts, length 450 mm, complete all as specified and directed.

S&F in renewal of 10 Ltr capacity PVC low level flushing cistern, top push type with inlet ball valve, PVC float, brackets including superior quality PVC flush pipe of 32 mm dia, complete all as specified and directed.

S&F in renewal of sink with draining board made of stainless steel 1mm thick with plugs, washers incl brackets of suitable angle iron, 32 mm dia superior quality PVC waste pipe, 32 mm dia CP brass waste coupling and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

S&F in renewal of stainless steel utensil plate rack of size 1000x900x180 mm, made of 1.00 mm thick stainless steel sheet and fixed in position, design and pattern as approved by the GE, complete all as specified and directed.

S&F in renewal of ABS body chromium plated health faucet including 8 mm dia pop up connection pipe with CP brass nuts of minimum 1.50 m length of flexible tube with wall hook, complete all as specified and directed.

M&L for 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

M&L for figured glass, 3 mm thick, pin head type and glazing with oil putty in squares not exc. 0.50 Sqm in each pane complete all as specified and directed.

S&F in renewal of shower rose, chromium plated brass, fancy type, 125 mm size with swivel joint, screwed to iron pipe or for union of 15 mm dia, complete all as specified and directed.

S&F in renewal of fancy type bib tap, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe of size 15 mm bore, complete all as specified and directed.

S&F in renewal of stainless steel grating doom of 100mm dia, with or without waste pipe hole, complete all as specified and directed.

S&F in renewal of glass shelf assembly of 6 mm thick glass, 12 cm wide and 60 cm long and CP guards of approved quality and fixed to wall with CP brass screws etc, complete all as specified and directed.

S&F in renewal of plastic seat cover for EWC, white closed pattern with flat bottom including mild steel chromium plated or aluminised hinging device, complete all as specified and directed.

S&F in renewal of Toilet paper holder chromium plated, complete all as specified and directed.

S & F in renewal of stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples, complete all as specified and directed.

Taking down chowkats or frames with shutter (without taking off shutters from the frame) n. exc. 1.50 Sqm each & removing to or from store complete all as specified and directed.

S & F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing as applicable to item 08095 given in SSR Part – II (2020).

S & F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails mild steel frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppy and fixing in the frame at site complete all as per specifications and drawings as applicable to item 08080 given in SSR Part–II.

S&F 125 mm size aluminium handles, cast type, anodised, complete all as specified and directed.

S & F Aluminium anodised barrel tower bolt of extruded section of size 150mm long all as specified and directed.

S & F butt hinges, medium weight, cold rolled mild steel and fixed of size 100mm long all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc removing materials to store for reuse or for taking credit and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

Dismantling unserviceable main switch/DBs incl wooden board and deposit to MES store yard including making good disturbed surface of wall complete all as specified and directed.

Taking down sub main wiring of any size/capacity complete all as specified and making good disturbed sufaces to match with the existing surface, complete all as specified and directed.

M&L for Point wiring with PVC insulated (FRLS) unsheathed multi stranded copper conductor cable of size 1.5 Sqmm with PVC insulated (FRLS) unsheathed multi stranded copper conductor cable of size 1.5 Sqmm as earth continuity wire to be drawn in and including PVC casing capping not less than 20 mm width with all accessories and fittings, fixed on surface including providing wooden/PVC rectangular block for mounting switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet cover and making good disturbed surfaces, complete all as specified and directed for the following: - One light/ceiling fan/exhaust fan/bell buzzer point controlled by one, one way switch of 5/6 Amps.

All as per item No 55.00 (here-in-before) but one 5 Pin, 5/6 amps socket outlet point on independent board, controlled by one, one way 5/6 Amp switch.

All as per item No 55.00 (here-in-before) but one 5 Pin, 5/6 amps socket outlet point on same board, controlled by one, one way 5/6 Amp switch.

All as per item No 55.00 (here-in-before) but one light point controlled by two, two way switch of 5/6 Amps.

M&L Point wiring with PVC insulated (FRLS) unsheathed multi stranded copper conductor cable of size 2.5 Sqmm, with PVC insulated (FRLS) unsheathed multi stranded copper conductor cable FRLS of size 2.5 Sqmm as earth continuity wire to be drawn in and including PVC casing capping not less than 20 mm width with all accessories and fittings, fixed on surface for one socket outlet 15 amp on independent board including providing wooden rectangular block for mounting switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet cover and making good disturbed surface, complete all as specified and directed.

S&F switch piano flush type 5/6 Amps, 230 volts, single pole, one way, ISI marked, complete all as specified & directed.

S&F switch piano flush type 5/6 Amps, 230 volts, single pole, Two way, ISI marked, complete all as specified & directed.

Supply and fixing switch socket combination, 5/6 and 15/16 Amps, 230 volt, multi pin, flush type universal, complete all as specified and directed.

S & F bell push flush type 5/6 Amps 230 volts including cover plate, ISI marked, complete all as specified & directed.

S & F socket outlet, 5/6 Amps, 230 volt, five pin, flush type universal, ISI marked, complete all as specified & directed.

S&F switch piano flush type 15/16 Amps, 230 volts, single pole, one way, ISI marked, complete all as specified & directed.

S & F socket outlet, 15/16 Amps, 230 volt, five pin, flush type universal, ISI marked, complete all as specified & directed.

S & F switch socket combination, 5/6 Amps, 230 volt, multi pin, flush type, universal, ISI marked, complete all as specified & directed.

S&F modular switch 1 way 5/ 6 Amps, 1 module, 240 volts, ISI marked, complete all as specified & directed.

S&F modular socket, 5/6 Amps, 2/3 pin combined 2 module, 240 volts, ISI marked, complete all as specified & directed.

S&F modular switch socket Combination 15/16 Amps, 6 pin, 3 module, 240 volts, ISI marked, complete all as specified & directed.

S&F modular metal flush box 8 module, ISI marked, complete all as specified & directed.

S&F modular metal flush box 6 module, ISI marked, complete all as specified & directed.

S&F modular metal flush box 4 module, ISI marked, complete all as specified & directed.

S&F modular metal flush box 3 module, ISI marked, complete all as specified & directed.

S&F modular white cover plate with frame, 8 module, ISI marked, complete all as specified & directed.

S&F modular white cover plate with frame, 6 module, ISI marked, complete all as specified & directed.

S&F modular white cover plate with frame, 4 module, ISI marked, complete all as specified & directed.

S&F modular white cover plate with frame, 3 module, ISI marked, complete all as specified & directed.

S&F modular white cover plate with frame, 1 module, ISI marked, complete all as specified & directed.

S&F PVC/polycarbonate lamp holder, angular/batten type with back plate, ISI marked complete all as specified & directed.

S&F in renewal of stepped type electronic fan regulator, flush type, 230 volts AC, single pole, humming free, fixed on the existing phenolic laminated sheet, complete all as specified and directed.

S&F ceiling rose surface type PVC/Polycarbonate isolated body, 65x 50mm, 3 terminals, complete all as specified & directed.

S&F in renewal of call bell, AC, 230 volts, single pole, ISI marked complete all as specified & directed.

S&F of sub main wiring with two runs of single core PVC insulated and unsheathed FRLS multistranded copper conductor cable of size 4 Sqmm LT, 1100 volts grade, drawn through and including 20 mm size PVC casing & caping fixed on wall/roof/floors surface with accessories such as socket, elbow, junction box, bell mouth, reducer, bend and flexible conduit etc. and fittings and one run of 4 sqmm single core multistranded FRLS copper conductor cable green colour as earth continuity conductor, complete all as specified & as directed.

S&F of sub main wiring with two runs of single core PVC insulated and unsheathed FRLS multistranded copper conductor cable of size 6 Sqmm LT, 1100 volts grade, drawn through and including 20 mm dia PVC non metallic surface conduit with accessories such as socket, elbow, junction box, bell mouth, reducer, bend and flexible conduit etc. and fittings and one run of 6 sqmm single core multistranded FRLS copper conductor cable green colour as earth continuity conductor, complete all as specified & as directed. Note for srl item Nos 84 & 85 :- Two runs of cable one run of earth wire and one run of PVC non metallic conduit of 20mm dia shall be measured as one run length. Cable required for connection to DBs shall deemed to be included and shall not be measured separately. Earth wire shall run inside the PVC conduit.

S&F of sub main wiring with two runs of single core PVC insulated and unsheathed FRLS multistranded copper conductor cable of size 10 Sqmm LT, 1100 volts grade, drawn through and including 20 mm dia PVC non metallic surface conduit with accessories such as socket, elbow, junction box, bell mouth, reducer, bend and flexible conduit etc. and fittings and one run of 10 sqmm single core multistranded FRLS copper conductor cable green colour as earth continuity conductor, complete all as specified & as directed.

S & F in renewal of LED light fitting 1x9W/1X10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. with and including all light fitting connection with 2 core flexible cable 23/0.00076 from ceiling rose to light fitting connection etc complete all as specified and directed.

Fixing only in renewal of name plate LED light fittings of any watts with and including all light fitting connection with 2 core flexible cable 23/0.00076 from ceiling rose to light fitting connection etc complete all as specified and directed.

Fixing only in renewal of recess LED panel (2'x2') light fittings of 36 watt with and including all light fitting connection with 2 core flexible cable 23/0.00076 from ceiling rose to light fitting connection etc complete all as specified and directed.

Fixing only in renewal of LED building security light fitting, 25 watt & including 0.55 m long street light bracket made of 32 mm bore GI light grade tubing including necessary clamps, nuts, bolts, washers etc, complete all as specified and directed.

Fixing only in renewal of LED light fittings (batten type) of any watts fixed on wall/floor/roof with and including all light fitting connection with 2 core flexible cable 23/0.00076 from ceiling rose to light fitting connection etc complete all as specified and directed. Notes for srl item Nos 88 to 91 :- (i) LED light fittings of any Watts as specified under these item shall be issued under Schedule 'B' free for fixing only. (ii) Cost of tools and plants necessary for fixing of light fittings shall be arranged by contractor and cost of suitable copper conductor wire from ceiling rose to light fitting shall be deemed included in the quoted unit rate.

S & F factory made MCB DB made of sheet steel phosphatised, powder painted with bus bar 200 A, neutral link, earth bar and Din rail, 240 Volts SPN with 8 ways, Double door, complete all as specified and directed.

S & F factory made MCB DB made of sheet steel phosphatised, powder painted with bus bar 200 A, neutral link, IP-43-IK09 protection grade, earth bar and Din rail, 415 Volts TPN with 4 ways, Double door, complete all as specified and directed. Note for items of MCB DB - (1) The unit rate includes for cutting the brick walls to accommodate DB to make flush to wall. (2) The unit rate includes for making good the disturbed surfaces including finishes to match with the adjoining surface.

S&F MCB, 6 to 32 Amps, Single Pole, 240 Volt, 10 KA 'B' curve including all accessories, complete all as specified and directed.

S&F MCB, 6 to 32 Amps, Single Pole & Neutral, 240 Volt, 10 KA 'B' curve including all accessories, complete all as specified and directed.

S & F, MCB TPN 63 Amps, 415 volts, four pole, B-curve, rupturing capacity 16KA conforming to IS-8828-1996, IEC-60898, complete, all as specified & directed by Engineer-in- charge.

M&L for Earthing with galvanized steel earth plate electrode of size 600 mm x 600mm x 6.0 mm, buried directly in ground (earth plate not less than 2.25 Mtr below normal ground level) connected to galvanized iron earth wire of 4 dia by means of bolts, nuts, check nuts and washers of galvanized iron including 15 mm bore light grade GI tubing for protection of earth wire, MS sheet metal funnel with wire mesh, watering pipe medium grade 20 mm bore, charcoal or coke and common salt in alternative layer of 15 Cm compacted thickness all around the electrode with concrete earth pit of PCC 1:3:6 type 75 mm thick precast RCC (1:2:4) type B1 pit cover reinfored with 8 mm dia deformed bar and suitable handle made of 10 mm dia round bar and necessary excavation, earth work, in soft/loose soil and disposal of spolis to a distance not exc 50 Mtr and necessary connection and testing complete all as shown in electrical plate No. 3 and including dismantling of old u/s earthing complete all as specified and directed. Notes: - (a) Irrespective of whatever is shown in plate No 3 of SSR, earth pit shall be casted in PCC (1:3:6) type C-1 and precast cover of RCC (1:2:4) type B-1 with suitable handle. (b) Item includes the cost of GI pipe for protection of earth wire and earth wire upto 7.5 m. Any variation below or above shall be measured and paid for separately under relevant item of this Sch ‘A’.

M/s AKASH CONSTRUCTION CO.

M/s Prem Associates

CHOUDHARY CONSTRUCTION CO