SPECIAL REPAIRS TO BUILDING No. T-40 (AGE B/R, AGE E/M AND AO OFFICE) AND T-41 (GE OFFICE) at GE (P) (NAVY) VISAKHAPATNAM

Amount

Taking down of chowkats or frames not exc 1.5 sqm each with shutters (without taking off shutters from the frames) and set aside or removing from site.

All as per Sl. Item No. 1 above but exc. 1.5 sqm but n. Exc. 4 sqm each.

Dismantling of Plain and corrugated Asbestos (corrugated, semicorrugated, etc.) any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

Dismantling of boarding any discription, fixed in any position with nails complete all as specified and directed.

Dismantling of cast iron work of any discription, fixed in any position complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc., and disposal of unserviceable materials, debris and rubbish complete all as specified and directed.

Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness, (Below or above ground level) and disposal of unserviceable materials, debris and rubbish complete all as specified and directed.

Demolition of reinforced cement concrete in roofs, floors (other than ground floors), beams, staircases, landing,chajjas and similar suspended work complete all as specified and directed.

Demolition of and breaking up drain pipes(salt glazed ware, AC or reinforced concrete) set in cement in mortar 150 mm dia etc complete all as specified and directed.

Taking down of cement plaster of any description on brick or stone walls, ceiling, chajja, roof projection etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Excavating in trenches, n exc 1.50 m wide and n exc 1.50 m in depth for foundation etc, or for shafts, wells, cesspits, manholes pier holes, etc, n.exc. 10 Sqm on plan and n. exc. 1.50 m in depth and getting out soft soil complete all as specified and directed.

Returning filling in, including spreading levelling watering and well ramming in layers not exc 25 cm thick complete all as specified and directed.

Removing excavated soil exc. 250 m but n. exc. 500 m and depositing where directed at a leval n. exc. 1.50 m complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) in foundation, filling, mass concrete complete all as specified and directed.

S&F seamless calcium silicate false ceiling made out of 12 mm thick, 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having Philips head with under head cutter at 200 mm centre to centre, including finishing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finishand including the following complete all as specified and directed :-

(i) Applying two coats of Acrylic Washable Distemper over a coat of alkali resistant primer and including Frame Work using GI perimeter channels of 0.55 mm thick, having one flange of 20 mm and another flange of 30 mm and web of 27 mm along the perimeter of the ceiling, fixed to wall with nylon sleeves and screws at 450 mm intervals, GI intermediate channels of size 45 mm x 15 mm x 0.90 mm supported with GI ceiling angles of size 25 mm x 10 mm x 0.55 mm fixed to soffits with steel expansion fasteners / GI cleats at 1220 mm intervals, ceiling section of 0.55 thick having knurled web of 51.5 mm and two flanges of 26 mm each with lips of 10.5 mm fixed to intermediate channel with connecting clips and in direction perpendicular to the intermediate channels at 457 mm centre to centre including dismantling of wall & Ceiling Boards (Fibre /pulp/ insulation etc) of any description or insulation Boards / Slabs / Blankets including cover fillets. (ii) Providing and fixing 10 mm thick and 100 mm wide decorative border with POP ceiling corners.

M&L 12 mm thick Gypsum board in ceiling all as per manufactures instructions complete all as specified and directed.

S&F anodised aluminium snap grid frame work of size 605 x 605 mm for false ceiling complete all as specified and directed.

S&F for hangers 6 mm dia GI (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of GI flat 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia, 40 mm long complete all as specified and directed.

Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in ridge/roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L PCC solid block masonry with C5 grade solid units having density not less than 1800 kgs / Sqm as per IS- 2185 Pt-1 built in CM 1:6, exc. 10 cm in width and setting in mortar complete all as specified and as directed.

M&L preparing new surfaces of wood and wood based materials of any description and girth not otherwise described and treating backs of chowkats, area tarred exceeding 0.1 Sqm and not exceeding 0.5 Sqm each with tar or coal tar black paint complete all as specified and directed.

S&F 2nd class hard wood plain chowkats and framed, rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S&F 35 mm thick factory made 2nd Class Hard wood panelled shutter (two panels) with lock rail and panel of 9mm B.W.R commercial ply or 12 mm veneered partical board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part-1),kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of M.S tube for top & bottom rails M.S. frame shall be covered with heat moulded wood plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain coulur PVC sheetas for top rail laock rail & bottom rail on either side complete all as specified and directed.

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube as specified and drawing complete all as specified and directed.

S&F Powder coated Aluminium (Minimum thickness of powder coating 50 micron) for frame of doors, Sliding window / ventilators shutter three track section for frames of weight not less then 1.17 kg/Rm and sliding section for shutter frame all round with aluminium section of weight not less then 0.42 kg /Rm complete all as specified and as directed

S&F anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre and including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and directed.

S&F 5.5 mm thick sheet glass, ordinary quality and glazing with oil putty in square n. exc. 0.5 Sqm in each pane along with reflective type 25 micron solar film stick on glass complete all as specified and directed.

S&F 50 micron power coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

S&F 50 micron power coated anodised aluminium door shutters, aluminium sections weighing 0.55 kg/m and including necessary joining cleats, glazing clips, rubber neoprene packing, handle 2 Nos. in each door, hinges, anodised aluminum snap beading screws complete all as specified and directed.

S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed. all as specified.

S&F door closer hydraulically regulated, designation No-1, universal type, suitable for door shutters for 700 mm in width and of weight not more than 35 kg and fixed complete all as specified and directed.

S&F brass mortice lock, vertical type size 65 mm (4 levers) and including necessary fittings etc, complete all as specified and directed.

S&F harrison rails, stailness steel, chromium plated with fixing brackets, stops, rollers etc, complete all as specified and directed.

S&F 100 mm stainless steel butt hinges,fixed with stainless steel screws for PVC door complete all as specified and directed.

S&F 100mm stainless steel butt hinges, medium weight, cold rolled complete all as specified and directed.

S&F 150 mm stainless steel barrel tower bolts,stove enamelled black,with bright bolt & fixed complete all as specified and directed.

S&F 200 mm stainless steel barrel tower bolts of stove enameled black, with bright bolt and fixed complete all as specified and directed.

S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F 125 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 150 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F mild steel hold fast made out of MS flat iron for chowkats and other small articles including making shape, drilling hole etc. complete all as specified and directed.

M&L precast cement concrete 1:2:4, type B1 (Using 20 mm graded stone aggregate) in landings, cover slabs,cooking slab, shelves, Chajjas and similar articles with plain faces and set in CM 1:4 complete all as specified and directed. Note : Reinforcement shall be measured & paid separately.

M&L mild steel TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips.

M&L mild steel TMT bars 6 mm to 8 mm dia., cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips complete all as specified and directed.

M&L 50 mm thick plain cement concrete type B1, (1:2:4) (using 20 mm graded stone aggregate) in flooring / plinth protection and including finishing the surface even and smooth without using extra cement complete all as specified and directed.

Dismantling of floor hearth or wall tiling of any description and including cement mortar bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified and directed.

M&L vitrified ceramic (light shade) tiles 10 mm thick (square / rectangular) polished area of each tile exceeding 0.36 Sqm but not exc. 0.42 Sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match set and jointed in neat cement slurry over and including 15 mm thick screed bed of CM (1:6) and pointed with white or coloured cement to match complete all as specified and directed.

M&L non - skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc. 0.11 sqm but not exc. 0.18 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match set and jointed in neat cement slurry and including 15 mm thick screed bed of CM (1:6) and pointed with white or coloured cement to match complete all as specified and directed.

M&L coloured glazed ceramic design tiles 350 x 250 x 7 mm / 450 x 300 x 7 mm thick on vertical surfaces such as skirting, dado and risers to steps etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in CM (1:4) complete all as specified and directed.

M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM (1:6) and finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM (1:4) and finished even and fair without using extra cement and including mixing of WPC wherever required as per manufacturers instructions complete all as specified and directed. NOTE: WPC shall be measured & paid separately.

Supply only integral water proofing compound of approved quality complete all as specified and directed.

M&L preparation of new plastered wall surfaces and including applying two coats of weather proof external emulsion paints over a coat of primer complete all as specified and directed.

M&L complete removal of existing treatment over wall surfaces and including applying two coats of weather proof external emulsion paint over a coat of primer complete all as specified and directed.

M&L preparation of newly plastered wall surfaces and including applying two coats of oil bound distemper over a coat of primer and two layers of wall care putty complete all as specified and directed .

M&L preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth & including applying with two coats of synthetic enamel paint over a coat of redoxide zinc chromium primer complete all as specified and directed.

M&L preparation of new wood or wood based surfaces of any description not otherwise described, over 10 cm width or girth & including applying with two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Dismantaling of water tank exc 500 ltr & n exc 1000 ltr and removing to store etc complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sun shades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in stone, concrete block and concrete slab complete all as specified and directed.

S&F 3-layer PP-R Polypropylene random copolymer) pipes 16 mm dia SDR 7.4 (PN16) UV stablised laid & concealed in walls including bends, elbows, unions etc, laid on walls for vertical stacks including chasing the wall and making good and including taking down complete all as specified and directed.

All as per item No 62 above but 20 mm dia

S&F PP-R gate valves (brass insert) of 20mm dia with iron wheel head screwed both ends for iron pipe and fixed etc complete all as specified and directed.

Supply, hoisting, fixing in position and connecting incoming and outgoing pipes, 1000 litres capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top), multilayer, complete all specified and as directed including taking down existing tank.

S & F in repairs 15 mm bore chromium plated fancy type bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs fancy type 15 mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S&F in repair fancy type 15 mm bore stop valves, chromium plated with long shank and cup (concealed type) cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F 15 mm bore CP stop valves fancy type screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs 20 mm ball brass valves, high pressure,with polythane float and flynut, screwed for iron pipe or brass ferrule complete all as specified and directed.

S&F in repairs 125 mm dia stainless steel gratings with waste hole of min weight 40 gms complete all as specified and directed.

S&F in repairs 100 mm dia stainless steel gratings without hole of min weight 25 gms complete all as specified and directed.

S&F in repairs 32 mm dia, waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F towel rail 600 mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190 gms) complete all as specified and directed.

S&F towel ring of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 90 gms) complete all as specified and directed.

S&F soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed

S&F in repairs PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (pedestal), white (excluding fixing bolts, flushing cistern and flush pipe) and including seat and cover complete all as specified and directed.

S&F in repairs PVC valveless, syphonic action type, 10 litres capacity flushing cistern low level white with inlet, ball valve, float and handle and including brackets and flush pipe complete all as specified and directed.

S&F in repairs vitreous china wash hand basin white, flat back, size 550 x 400 mm size and including cutting for and pinning ends of brackets or erecting stand complete all as specified and directed.

S&F solid PVC wall lining consisting of 5 mm thick wood grain printed single side prelam, PVC Sheet inclusive of solvent cement and fixing at side on PVC frame etc as required complete all as specified and directed.

S&F 5 mm thick PVC sheet fillets of width 35 mm for wall paneling inclusive of fixing on to wall make PVC Frame as per specification complete all as specified and directed.

M&L preparation of old steel surfaces of any description not otherwise described, over 10 cm width or girth & including applying with two coats of synthetic enamel paint complete all as specified and directed.

S&F solid PVC wall lining consisting of 5 mm thick wood grain printed PVC Sheet fixed on Aluminium frame including all necessary fittings etc as required all as per specification and drawing complete all as specified and directed.

S&F 6 mm thick sheet toughned glass as in hinged doors, partitions, automatic doors and similar work and including cutting to shape, drilling holes required complete all as specified and directed.

S&F in repairs 12 mm thick toughened tinted / frosted glass and including itching, 300 mm long SS handle fixed to door shutter on both side, safety SS lever lock, double action floor door spring for each shutter and including pivot, screws, cutting to shape & drilling holes as required with necessary fittings etc, complete all as specified and directed.

M&L 5 mm thich frosted glass, on one side and glazing with rubber neoprene packing in squares exc. 0.5 sqm in each pane for door and other similar work complete all as specified and directed.

M&L 3 mm thich figured glass, pin head type and glazing with oil putty in squares n. exc. 0.5 sqm in each pane complete all as specified and directed.

S&F for wire cloth of galvabised mild steel wire cloth 0.63 mm nominal dia of wire and avarage width of aperture 1.4 mm dia fixed with tinned tacks of galvanised wire staples complete all as specified and directed.

S&F wire netting of stainless steel wire 1.4 mm dia fixed with tinned tacks of stainless steel wire staples size of mess 12 mm complete all as specified and directed.

M&L machine cut kota stone slab flooring 20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab and including rubbing and polishing over 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L granite (of any type) 20 mm thick tiles machine cut, in skirting / dado / cill over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab and including rubbing and polishing complete over 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L RCC M 20 mix Type - A1 (using 20 mm graded stone aggregate) in beams. Cantilevers, bressumers, lintels over 1.5 m span etc, complete all as specified and directed.

M&L formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed.

M&L brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 complete all as specified and directed.

M&L PCC 1:3:6 type C-2, 100 mm thick in floors, sub base complete all as specified and directed.

S&F 20 mm dia CPVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., complete all as specified and directed.

All as per Sl. Item No. 98 above but 15 mm dia

S&F PVC (SWR) floor trap 75 dia complete all as specified and directed.

S&F 75 mm dia PVC (SWR) pipes single cocketed, in any length, in rubber ring joints laid in trnches or in floor etc complete all as specified and directed.

S&F 110 mm dia PVC (SWR) pipes single cocketed, in any length, in rubber ring joints laid in trnches or in floor etc complete all as specified and directed.

S&F 110 mm dia bore PVC (SWR) bends of any radius complete all as specified and directed.

S&F 110 mm dia bore PVC (SWR) bends with access door of any radius complete all as specified and directed.

M&L concrete bed 1:4:8 type D2 to drain pipes 100 mm dia, and including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

M&L 100 mm dia SGSW drain pipes laid in trenches and jointed complete all as specified and directed.

M&L 100 mm dia SGSW gully trap square /roundd mounted type P or S laid in trenches and jointed complete all as specified and directed.

S&F Rolled Mild steel for roof trusses (framed),Fe-410W (Gde E- 250), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed.

M&L 75 mm thick PCC 1:3:6 type C2 as in plinth protection / footpath using 40 mm graded stone aggregate finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

Taking down carefully old unserviceable copper/aluminium point wiring (light,Exchaust fan, socket or power) complete incl fittings such as switches,ceiling roses, pendents, regulators,bells,sockets,tube light fittings, fans etc for taking as credit or safely depositing them in MES store yard, and making good disturbed surface of walls & floors etc complete all as specified and directed.

Taking down old unserviceable Main Switch, DB's consisting of MCBs wooden/GI/MS sheet board, energy meter etc for kept in store complete all as specified and directed.

M&L point wiring complete with 1100 Volts, FRLS Grade, 1.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable, confirming to IS - 694 drawn through and including medium duty PVC Conduit, 20 mm dia including all accessories concealed in Walls / Roofs / Floors / Ceiling etc. and Pressed Metal Flush Box made out of 1.2 mm thick MS Sheet of suitable size and required module frame with top cover plate, for fixing switches, fittings, regulators, blanking plates etc. concealed in walls, 1100 Volts, FRLS Grade, 1.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable as earth continuity conductor with colour coding and connecting to earth dolly for one light point controlled by one switch complete all as specified and directed.

All as per Item No 112 above but with two single core PVC insulated, unsheathed, multistranded copper conductor of size 1.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 1.5 sqmm green in colour as earth lead for 5/6 A modular socket point on independent board complete all as specified and directed.

All as per Item No 112 above but with two single core PVC insulated, unsheathed, multistranded copper conductor of size 4.0 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 4.0 sqmm green in colour as earth lead for 15/16 A modular socket point on independent board complete all as specified and directed. Note: All three wires for 15/16A socket will come directly from nearby DB, no tapping will be allowed during execution of work and rate of same deemed to be included in quoted rate.

All as per Item No 112 above but with two single core PVC insulated, unsheathed, multistranded copper conductor of size 1.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 1.5 sqmm green in colour as earth lead for 5/6 A socket point with switch on same board complete all as specified and directed.

S&F modular switch one way 6 Amps 230 volts,1 module complete all as specified and directed.

S&F modular bell push switch one way 6 Amps 230 volts,1 module complete all as specified and directed.

S&F modular switch one way with indicator 16 Amps 230 volts,1 module complete all as specified and directed.

S&F modular socket 2 in 1, 2/3 pin ,6 Amp 2 module complete all as specified and directed.

S&F modular socket 2 in 1, 3 pin ,6/16 Amp 2 module complete all as specified and directed.

S&F modular electronic step regulator (speed regulation in 0-4 steps) 2module suitable for ceiling fan 1200 sweep/1400 mm, 100 Watt complete all as specified and directed.

S&F modular TV socket 1 module in separate box and providing separate PVC conduit pipe complete all as specified and directed.

S&F modular RJ 45 socket 1 module in separate box and providing separate PVC conduit pipe complete all as specified and directed.

S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20A complete all as specified and directed

S&F bell musical type AC 230 V Single Pole complete all as specified and directed.

S&F rigid non-metallic PVC conduit of size 25 mm dia exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc including GI wire for wiring of TV/telephone cable concealed in wall or clamped on wall complete all as specified and directed.

S&F energy efficient LED tube light fitting with tube 20 watts or nearest size ,240V, 50hz surface mounted, decorative ultra slim LED lighting fixture with extruded polycarbonate environmental friendly, energy efficient ready to use pack of complete with mounting bracket etc including connecting up with 1.0 sq mm 3 core flexible copper conductor cable complete all as specified and directed

S&F energy efficient LED tube light fitting with tube 9/10 watts or nearest size ,240V, 50hz surface mounted, decorative ultra slim LED lighting fixture with extruded polycarbonate environmental friendly, energy efficient ready to use pack of complete with mounting bracket etc including connecting up with 1.0 sq mm 3 core flexible copper conductor cable complete all as specified and directed

S&F energy efficient LED tube light fitting(mirror optic) with tube 5/6 watts or nearest size ,240V, 50hz surface mounted, decorative ultra slim square profile LED lighting fixture with extruded polycarbonate environmental friendly, energy efficient ready to use pack of complete with mounting bracket etc including connecting up with 1.0 sq mm 3 core flexible copper conductor cable complete all as specified and directed

S&F recessed mounted square shape Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

S&F round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, olders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium building security light with high power LED as light source lamp type 35W with SPD, IP 66 protection with rod and connecting arrangements complete all as specified and directed.

S&F ceiling rose ,surface bakelite 65mm x 50mm size with three terminals complete all as specified and directed.

S&F in repair energy efficient ceiling fans complete with blades, down rods and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE Five star rated with brushless direct current motor (BLDC) complete all as specified and directed including taking down old fans and depositing to MES store yard.

S&F in repair PVC ventilation fan AC, single phase, 230/240 V, of size 250 mm seeep body incl making holes on wall & making good the distrubed surfaces with all connecting arrangements complete all as specified and directed including taking down old fans and depositing to MES store yard.

S&F TPN DB with sheet metal enclouser, 04 way IP-43 with rated 100 A fully insulated copper bus bar & shrouded neutal bars, double door suitable for MCB TPN as incommer and MCB SP/TP as outgoing with neutralbar, earthbar and cable tiles for cable managements, incl cutting chases for DB of reqd size and making good distrubed surface area complete all as specified and directed

S&F DB with sheet metal enclouser 240 volts, 12 way IP-43 with rated 100A Copper bus bar single pole & neutral double door for MCB, incl cutting chases for DB of reqd size and making good distrubed surface area complete all as specified and directed

S&F DB with sheet metal enclouser 240 volts, 8 way IP-43 with rated 100A Copper bus bar single pole & neutral double door for MCB, incl cutting chases for DB of reqd size and making good distrubed surface area complete all as specified and directed

S&F MCB, SP, 10KA, 230V, "C" curve, 06-32 A, ISI Marked complete all as specified and directed.

S&F MCB, SPN 10KA, "C" curve, 40 to 63 A, ISI Marked complete all as specified and directed.

S&F MCB, TPN, 10KA, 415V, "C" curve, 40 to 100 A, ISI Marked complete all as specified and directed.

M&L concealed sub main wiring with 2 runs of 10 sqmm main wire along with 1 run of 10 sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC conduit (medium grade) with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good the same & taking down complete all as specified and directed. NOTE:- (i) Two runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length. (ii) The quoted rate is deemed to be include cutting, chasing, pinning and making good the disturbed surface.

All as per item No. 142 above but with 2 runs of 6 sqmm main wire along with 1 run of 6 sqmm earth wire.

All as per item No. 142 above but with 2 runs of 16 sqmm main wire along with 1 run of 16 sqmm earth wire.

M&L earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick buried directly in ground in vertical position (earth pit not less than 2.25 m deep below the normal ground level) with top edge of the earth plate not less than 1.5 m below normal ground level, connected to galvanised earth lead wire of 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel, all as shown in electrical plate No. 3 connected to earthing test point and including dismantling complete all as specified and directed. Note:- The unit rate shall also include for earth work in any type of soil, PCC 1:3:6 type C1 chamber, RCC 1:1.5:3, type A1 cover slab, 50 mm thick reinforced with 8 mm dia TMT bar @ 140 mm C/C both ways, 10 mm dia plain bar lifting handle embedded in cover slab, 20 mm bore medium grade GI watering pipe, 15 mm bore GI light grade earth lead protection pipe, funnel, wire mesh, copper lugs, charcoal and common salt in alternate layer etc.

SRI VENKATA SAI MANIKANTA CONSTRUCTIONS

M B CONSTRUCTIONS

ANJALI ENTERPRISES

P SRINIVASA RAO

LAKSHMI SAI CONSTRUCTIONS

SMART ENERGY SOLUTIONS