REPAIRS TO PLINTH PROTECTION, CULVERT, GARBAGE BINS AND DRAIN UNDER THE AREA OF AGE B/R-I OF GE (ARMY) No 1 JODHPUR

Amount

Demolition of unreinforced cement concrete in ground floors and pavings not exceeding 15cm thickness ( below or above ground level) of any description and removing rubbish to out side MD land, complete all as specified & directed.

M & L PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base of flooring, path , foundation of fencing post etc complete all as specified and directed.

M&L for 40mm thick plain cement concrete (1:2:4) type B1, (using 20mm graded stone aggregate) as in floor including finishing cement concrete surface even and smooth without using extra cement complete all as specified & as directed.

Supply only 38 mm wide 3 mm thick glass dividing strips.

M&L 50mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate laid in alternative bays as in plinth protection including finishing the surface even and fair & filling i.e. one part of bitumen 85/25 and 3 parts of sand by weight in 2 mtr interval complete all as specified and directed.

Demolition of stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified & as directed.

M&L PCC solid building blocks exc 10 cm in width type B1 (1:2:4 ) using 20 mm graded aggregate set in cement mortar (1:6) complete all as specified and directed.

M&L for squarred rubble walling Jodhpur type regular coursed well bonded ,bedded and solidly hearted built in cement mortar 1:6 complate all as specified and directed.

All as per item No 8 above but except stone complete all as specified and directed.

Extra over squarred rubble stone walling Jodhpur type regular course for hammer dressing to face of stone with max depression on face from a straight edge not exc 20mm and dressing complete all as specified and directed.

S&F machine cut 50 to 75 mm thick well dressed Jodhpur type stone slab cover 25 to 30 cm wide and not less than 90 cm in length, sharp edge, plain surface all sides, laid dry abutting each other with gap between adjacent slab not exceeding 10mm over complete all as specified & directed.

Taking down existing cement plaster including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 finished even and smooth without extra cement on stone wall surface complete all as specified & directed.

M&L for 15mm thick rendering in CM 1:4 finished even and smooth without extra cement on stone wall surface complete all as specified & directed.

Racking out joints/pointing to square rubble masonry Jodhpur type regular coursed built in cement mortar all as specified

M&L for Keyed pointing to square rubble masonry Jodhpur type regular course in CM 1:3 all as specified.

M/L two coat of colour wash on newly plastered/ unplastered surfaces over one coat of white wash on wall & including preparation complete all as specified and directed.

M&L for preparation of new plastered wall surfaces and applying two coats of oil bound distemper white or tinted over & including M&L for single coat of wall care putty 2mm thick complete all as specified and directed.

M & L two coat of cement base paint over a coat of white chalk on wall over a plaster/unplastered surfaces including preparation of surface complete all as specified and directed.

M & L applying one coats of synthetic enamel paint on old steel surface of any description over 10 cm width or girth including preparation of surfaces complete.

Demolition of reinforced cement concrete of as staircase, landing, chajjas and similar suspended work of any description and any position not otherwise etc complete all as specified and directed.

M & L for Providing precast RCC using 20mm graded aggregate as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles set in CM 1:6 complete all as specified and directed.

M&L for TMT bars 6 to 8mm dia and over, cut to length , bent to shape required including cranking, bending & binding with MS wire (annealed ) not less than 0.9mm dia or securing with clips, as in stirrups also & all as specified and directed.

Dismantling of RCC fencing post or struts of any description/section including taking out embeded ,barbed wire in concrete and making good disturbed all as directed

Dismantling expanded metal, chain link fencing, barbed wire in carefully any thickness or mesh, fixed with steel or wood fillets, if anyall as directed

Excavation in post holes (or similar holes) each n exc 0.5 cum in soft/loose soil getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers n exc 25cm watering and removing surplus soil to a distance n exc 50m and making good surfaces in any type of hard&dense soil complete all as specified and directed.

S & F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for round bars 10mm dia and over, cut to length , bent to shape required including cranking, bending & binding with MS wire (annealed ) not less than 0.9mm dia or securing with clips, as in stirrups alsoFE 410-w(Gde, E-250 quality A or Fe 290(Gde-E-165) complete all as specified and directed.

Supply only chain link MS galvanised fencing of 4mm dia and size of mesh 75 mm x 75 mm/50mm x 50 mm) complete all as specified and directed. Note: BOO will consitute by GE to determinate the weight/ sqm of chainllink fencing of avg of three rolls.

Fixing only chain link MS galvaniced fencing including line wires any mesh size and type to any type of standards, rails straining bolts etc including provision of binding wire complete all as specified and directed.

S & F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strainging bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or stel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 10 cm but n. exc 15cm long and dia 11 to 16 mm dia of neck complete all as specified and as directed.

S&F for welded steel wire fabric (Weight n.exc 4kg per square metre)fixed to wood or steel members complete all as specified and as directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. complete all as specified and directed.

M & L chequrred cement concrete tile 25 cm x 25 cm x 22 to 25 mm thick, set, jointed and pointed in neat cement slurry as in floor with grey cement and pigment over and including M & L 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M & L factory made rubberised coloured chequrred tile 30 cm x 30 cm x 22 to 25mm thick, set, jointed and pointed in neat cement slurry as in floor with grey cement and pigment over and including M&L 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Providing and laying (rubberised interlocking paver)60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including M&L 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;

Supply and laying machine / factory made kerb stone of M-25 grade,at or near ground level, cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required, complete all as specified & directed.

Dismantling structural steel work including doors, gates etc complete all as specified and directed.

M&L for framed work using MS angle iron , rectangular hollow sections. solid square bars , fat iron, MS Channel sections , or hollow structural tubes etc incl necessary cutting & bending to shape & welding together complete as in cooler stand, gates, cattle traps, overhead trusses, railings etc complete all as per the design & patterns complete all as specified and directed.

M&L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.

M & L applying two coats of synthetic enamel paint on steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of surfaces completeall as specified and directed.

Dismantling of asbestos cement/ steel sheeting (plain, corrugated or semi corrugated etc., ) as in roof coverings complete all as specified and as directed .

M & L for Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified.

S & F 4mm thick fiber glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with coach screw and washer in roof , wall etc.

S & F framed work such as grills, grating, etc. with ends of bar shoulder and/or riveted, or forged into spikes, framed guard bar as in drain cover complete all as specified and as directed.

M&L PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in flooring benching to drain, coping, etc and the like edge slightly rounded or chamfered including necessary use and waste of form work complete all as specified and as directed.

M & L Precast cement concrete 1:3:6, type B-0 by using 12.5mm graded stone aggregate as in pillars to provide support of RCC jalliles, jointed with neat cement slurry, in CM 1:4 complete all as specified and as directed.

M&L providing 35 mm thick pre-cast cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in louvers & jallies (measured solid) including all mouldings and including pre-cast frames set in cement mortar 1:4, complete all as specified and as directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for connecting 150mm dia rcc pipe,complete all as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out and removing surplus soil to a distance n exc 50m and making good surfaces in soft and loose type of soil complete all as specified and directed.

M&L cement concrete bed to drain pipe including packing under and haunching against side of pipe after they are laid and tested in cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) for 150 mm dia pipe, complete all as specified and directed.

M&L cement concrete bed to drain pipe including packing under and haunching against side of pipe after they are laid and tested in cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) for 300 mm dia pipe, complete all as specified and directed.

Supply and laying, jointing and testing 150mm bore reinforced conctete pipes, class NP-2 laid and jointed in cement mortor 1:1 complete with collars or socket/spigot type laid jointed and haunching at side in cement, complete all as specified and directed. (Note- cement concrete used for haunching concrete shall be measured and paid seperately)

Supply and laying, jointing and testing 450mm bore reinforced conctete pipes, class NP-2, laid and jointed in cement mortor 1:1 complete with collars or socket/spigot type laid jointed and haunching at side in cement, complete all as specified and directed. (Note- cement concrete used for haunching concrete shall be measured and paid seperately)

Supply and laying, jointing and testing 300mm bore reinforced conctete pipes, class NP-2, laid and jointed in cement mortor 1:1 complete with collars or socket/spigot type laid jointed and haunching at side in cement, complete all as specified and directed. (Note- cement concrete used for haunching concrete shall be measured and paid seperately)

NOTE:- (i)- The contract sum shall be arrived at after duducting amount of schedule of "Credit" from the Total quoted amount

M/S SUMAN ENTERPRISES (BID ID -3395041)

M/s Chawariya Enterprises (BID ID -3392548)

M/S KAUTILYA GARG (BID ID -3400553)

KALWA TRANSPORTER AND SUPPLIERS (BID ID -3388635)

D.K.CONSTRUCTION CO (BID ID -3392604)

Pawan Kumar Shrama Contractor (BID ID -3392589)