PROVN OF INDOOR BADMINTON COURT AT AF STN MISSAMARI UNDER GE MISSAMARI

Amount

CONSTRUCTION OF TOILET BLOCK & CONSTRUCTION OF PEB OF SIZE 20MX15M WITH 12 CLEAR HEIGHT (Sch 'A' PART-I)

Lump sum price worked out by the Contractor for “CONSTRUCTION OF TOILET BLOCK & CONSTRUCTION OF PEB OF SIZE 20MX15M WITH 12 CLEAR HEIGHT” as listed in Schedule ‘A’ Part-I. Representing ** ___ % ______ percent *Above / Below the lump sum price of ₹ 79,84,867.56 inserted by the MES in Schedule ‘A’ Part-I.

SITE CLEARANCE AND EARTHWORK Surface dressing n.exc 0.15m deep getting out in soft/loose soil complete all as specified and directed

Removing excavated materials to a distance exceeding 50 mtr and upto a distance 250m and depositing where directed

Bringing approved earth (as approved GE from source outside defence land inclding all cost such as royalty if any, transportation, taxes if any etc. complete all as specified and directed. Note :- (a) Earth required for the item, shall be supplied by contractor, from outside MOD land, of any lead, at his own arrangement. (b) All cost of procurement of earh including cost of transportaion, compaction royalties, tax etc shall be deemed to be included in the unit rate quoted by the contractor. (c) Forming embankment/filling in low laying area including raising (or lowering) earth, spreading in layers not exceeding 30 cm thick, watering ramming/ rolling and finishing of required size, safe etc. not exceeding 1.5 mtr high from base/natural ground level. (d) With reference to clause 3.6 of MES Schedule Part-III of Serial Page No 22 it is clarified that measurement of the above item shall be finished embankment/ traverse of filled earth after consolidation/ compaction and 5% deduction shall be made from measured and calculated volume to allow for increase in bulk (e) Total qty/ partial qty of earth may not be available in Missamari area. The contractor shall bring the earth outside area and it is advised to quote the rate considering availability of soil and its lead involved.

Excavation in trenches n exc 1.50 m wide and n exc 1.50 m depth in soft /loose soil and getting out for lying of cable and pipe etc complete all as directed.

Returning, filling in, trenches in soft /loose soil including spreading, leveling, watering and well ramming in layers not exc 25 cm complete all as directed.

Removal of excavated soil to a distance n. exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as directed.

Excavation over area, exceeding 1.5m but not exceeding 3m deep and getting out in soft/loose soil complete.

Excavation over area, exceeding 3m but not exceeding 4.5m deep and getting out in any type of soil complete.

INTERNAL AND EXTERNAL ELECTRIC SUPPLY M & L for sub main wiring with 2 run of FRLSH PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 1.5 sqmm alongwith one run of FRLSH PVC insulated & unsheathed copper conductor of nominal cross sectional area 1.5 sqmm as earth continuity conductor drawn through & including PVC Casing and Capping of suitable size connected to DB or Main Board as per site requirement complete all as specified and directed. Make:- Havells / Polycab / RR Kabel / KEI

M & L for sub main wiring with 2 run of FRLSH PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm alongwith one run of FRLSH PVC insulated & unsheathed copper conductor of nominal cross sectional area 6.0 sqmm as earth continuity conductor drawn through & including PVC casing and capping of suitable size in Surface all as directed. Make:- Havells / Polycab / RR Kabel / KEI

S & F sheet metal enclosure MCB DB TPN 4 way with 200 amps rated bus bar 415 volts double door with magnetic locking system complete as specified . Make-L&T / Schneider/ Legrand/ ABB .

S & F MCB FP 415 volts 10 KA 'C' curve for fixing in MCB TPN DB of capacity 63 amps complete with connection, testing and commissioning all as specified and directed. Make-L&T / Schneider/ Legrand/ ABB .

S & F Sheet metal enclosure for MCB DB double door 240V single pole & Neutral 8 way with 200 Amp rated busbar. Make-L&T / Schneider/ Legrand/ ABB .

S & F Sheet metal enclosure for MCB DB double door 240V single pole & Neutral 4 way with 200 Amp rated busbar. Make-L&T / Schneider/ Legrand/ ABB .

S & F MCB 'C' curve single pole neutral , 32 Amps with breaking capacity 10KA, complete with connection, testing & commissioning as directed. Make-L&T / Schneider/ Legrand/ ABB .

S & F MCB SP, 240 volts, 6-32A Amps 50 Hz ,confirms to IS/IEC 60898 Breaking Capacity of 10 kA, C-curve, complete with connection, testing & commissioning as directed. Make-L&T / Schneider/ Legrand/ ABB .

S & F Energy saving new generation environment friendly & robust IP65 protected LED midbay with PDC housing suitable for ceiling (Surface/Suspended) mount & available in Wide beam optics. System efficacy 125 lm/W to 130 lm/W. with toughened glass IP 65 highbay light fitting luminaire with high power LEDs as light source and PC Cover having TOP opening seperate driver compartment with IP 66 Protection and impact resistance of IK07 with electronic driver of capacity 80 watts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 2.5 Sqmm 3 core ceiling rose to fitting and steel rod of required length bend to required shape complete all as directed by Engineer-in-Charge. Make- Havells Model No. ILIOSBAYPLUSHBP80WLED857SP90DTOPC or Equivalent in Crompton / Philips

M & L for point wiring with 1.50 sqmm (noninal area) FRLSH insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade,single core,laid in and including rigid PVC conduit complete with all fittings and accessories, fixed to walls/celling including muld steel terminal boxes 1.25 mm thick conforming to IS - 5133(Part -I) with 3.0 mm thick plastic laminated sheet top cover (ISI Marked ) for mounting switches/ regulator / bell push etc including 1.50 Sqmm (nominal area) FRLSH PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade,single core, earth continuity conductor connected to common earth dolly, for one light/fan point controlled by one switch cotrolled by one way switch duly fixed with copper lugs and PVC flexible pipe from ceiling rose to fitting/fixtures complete all as specified and directed. Make :- Havells / Polycab / RR Kabel / KEI

As per item No 2.18 above but one 3/5 pin 5 Amp socket outlet point controlled by one switch on same board.

As per item No 2.18 above but one 3/5 pin 5 Amp socket outlet point controlled by one switch on independent board.

As per item No 2.18 above but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed, flame retardant Low Smoke ( FRLSH ) cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and including 1.5 sqmm green copper conductor as continuous earth wire with lugs complete all as specified and directed. Make :- Havells / Polycab / RR Kabel / KEI

S & F Modular Switch (white) 1 way 6 A, 1 module complete all as specified and directed. Make :- Legrand / Havells / Anchor

S & F Modular Switch (white) 1 way 16 A, 1 module complete all as specified and directed. Make :- Legrand / Havells / Anchor

S & F Modular Socket (white) 6 A, 5/6 pin combined 2 module complete all as specified and directed. Make :- Legrand / Havells / Anchor

S & F Modular Switch Combination Socket (white) 6 A/ 16 A, 5/6 pin combined 2 module complete all as specified and directed. Make :- Legrand / Havells / Anchor

S & F Modular Blank plate(white), 1 module complete all as specified and directed. Make :- Legrand / Havells / Anchor

S & F Modular type White cover plate with frame 3 module complete all as specified and directed. Make :- Legrand / Havells / Anchor

S & F Modular type White cover plate with frame 4 module complete all as specified and directed. Make :- Legrand / Havells / Anchor

S & F Modular type White cover plate with frame 8 module complete all as specified and directed. Make :- Legrand / Havells / Anchor

S & F Modular type Metal Flush box 3 module

S & F Modular type Metal Flush box 4 module

S & F Modular type Metal Flush box 8 module

S&F Ceiling rose three terminals polycarbonate , isolated body complete all as specified and directed. Make :- Legrand / Havells / Anchor

S & F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and PC Cover having TOP opening seperate driver compartment with IP 66 Protection and impact resistance of IK07 with electronic driver of capacity 25 watts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting and GI pipe bracket made out of GI pipe medium grade 32 mm dia 1.5 mtr long bend to required shape complete all as directed by Engineer-in-Charge. Make- Havells Cat Part No. ENDURASUNDOWNSL25WLED765PASYBOPCIHD or equivalent in /Crompton / Philips

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 380m sweep with, blades, and frame and louvers complete all as specified and directed. Make Havells / Crompton / USHA / Orient

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and directed. Make Havells / Crompton / USHA / Orient

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC color Temp 3000K decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. Make :- Model No. LHEXACP5IN1W010 of Havells or Equivalent in Surya / Crompton / Philips

S&F in replacement decorative, wall mounting, champagne gold finish fixture with plastic body suitable for 9 W LED lamp B22 base made out of polycarbonate with unbreakable globe/frame suitable for LED bulb and provision of LED bulb 09 watts complete incl removal of old unsv fitting all as specified and as directed. Model No. LHFOECE1TZ1O014 of Havells or Equivalent in Crompton /Philps / Surya

S & F LED ADORE 10 W B22 CDL 5 STAR LAMP with B 22 base capacity 1200 lumen complete all as specified. Make : Havells, Cat No: LHLDEUEBML8Z010 or equivalent in Crompton or Bajaj

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative ultra slim round profile LED lighting fixture with extruded polycarbonate , environmental friendly energy efficiebt ready to use pack with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. Make :- Model No. LHEXAPP7UN1W020 of Havells or Equivalent in Surya / Crompton / Philips

Material and Labour for Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground to a depth not less than 2.25 mtrs below ground level with top edge of earth plate not less than 1.5 mtrs below normal ground level connected to GI earth wire 4 mm dia drawn through and including GI protection pipe of light grade 15 mm bore by means of bolts, nuts, check nuts and washers including excavation earth work provisioning of PCC chamber made of PCC 1:3:6 RCC cover funnel with wiremesh 20mm dia watering pipe Medium grade, GI protection pipe 20mm dia bore all as specified in Electrical Plate No.3 of SSR Part I.

Supply & Laying XLPE LT heavy duty UG Cable of size 50 Sqmm 3.5 Core laid in trences /floor/on wall/service connection PVC Insulated, sheathing and armd 1100 Volts grade with aluminium conductor including connection to the main switch/cut out MCB/MCCB with necessary lugs after cutting to required length complete all as specified and directed. Make :- Polycab / Havells / Gloster / KEI

M & L sand cushioning in trenches for cable protection with coarse sand laid dry in trenches with uniform thickness including consolidation complete all as directed.

Supply & Laying well burnt brick , locally available best quality (sub class "B" bricks ) laid in trences perpendicular to UG Cable protection complete all as specified.

S & F GI Tubing light grade of size 50mm dia in protection of cable at road crossing /hard standing/pole protection fixed with clam as per site requirement etc all as specified and directed.

Supply , laying & testing XLPE LT UG XLPE sheathed PVC insulated, screened PVC bedded, Galvanised Steel Strip of Wire armoured Electric Power Cable heavy duty with stranded Aluminium Conductor 1100 Volt grade, cross-sectional area 10 Sqmm 2 Core, laid in trenches/surface of Wall/in GI Pipe along with Pole for connec-tion to OH Lines including Brass Cable Glands Mild Steel Flat Iron Clamps, etc. and Testing, complete all as specified and as directed.

EXTERNAL WATER SUPPLY S&F 3 layered (Outer Green Coloured UV Stabalized, Middle Black Coloured UV Stabalized and Inner Most Layer White Coloured with Antimicrobial Property) PP-R (Polypropyelene Random Copolymer) Pipe 63 mm Outer dia, ISI marked, SDR 7.4 and SDR 11 UV Stabalised and Antimicrobial Fusion Welded having Thermal Stabality for Hot and Cold Water Supply all PP-R Plain and Brass Threaded Polypropyelene Random Fittings and laid in Trenches, complete all as specified and as directed.

S&F 3 layered (Outer Green Coloured UV Stabalized, Middle Black Coloured UV Stabalized and Inner Most Layer Whit Coloured with Antimicrobial Property) PP-R (Polypropyelene Random Copolymer) Pipe 32mm Outer dia, ISI marked, SDR 7.4 and SDR 11 UV Stabalised and Antimicrobial Fusion Welded having Thermal Stabality for Hot and Cold Water Supply all PP-R Plain and Brass Threaded Polypropyelene Random Fittings and laid in Trenches, complete all as specified and as directed.

S&F PP-R Gate Valves (Brass Insert) 32mm Outer dia and fixed including taking down of existing unserviceable One, complete all specified and as directed.

S&F PP-R Gate Valves (Brass Insert) 50 mm Outer dia and fixed including taking down of existing unserviceable One, complete all specified and as directed.

Cutting of existing CI/DI pipe laid 80 mm dia for inserting Tees for new connection of 80 mm x 63 mm dia all as specified and directed by Engr-in - charge

M&L for connection pieces for inserting 63 mm PPR pipe into 80 mm distribution mains all as specified and directed.

Making connection of PP-R distribution branch with PP-R main of 63 mm size by providing and fixing tee of 63 mm x 32 mm including cutting and making fusion joint etc all as specified and directed.

ROAD, PATH AND CULVERTS M&L for 100mm thick PCC 1:4:8 type D-2 using 40mm aggregate as in path complete all as specified and as directed.

M&L for sand filling under floors or in foundations incl. watering and consolidation complete all as specified and directed.

Precast cement concerete machine pressed and vibrated factory made heavy duty interlocking paver blocks any size or shape confirming to IS-15658-2006 of 60 mm thick M-35 grade with using grey cemenbt and pigment interstices filled with sand and bedded with including 25 mm thick sand plate vibrator etc all saspecified and as directed.

M&L for PCC kerb stone Type B-1 1:2:4 (20 mm graded crushed stone aggregate) complete all as specified and directed.

M&L Plain cement concrete in foundation filling and mess concrete type D-2(1:4:8) as on fdns of brick wall.

M&L Cement concrete in foundation filling and mess concrete type B2 1:2:4 40 mm graded aggregate as in bed of Hume pipe.

M&L Reinforced concrete pipes 600mm bore class NP2 laid and jointed complete with collars

M&L of brickwork with sub class 'B' bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for PCC 1:2:4 B-1 (using 20 mm aggregate) as in coping complete all as specified and directed

M&L Rendering 15mm thick on fair faces of Brick work of concrete surface in cement mortor 1:4 finished fair & even.

M&L Two coats of cement base paint over one coat of primer incl. preparation of surface.

SEWAGE DISPOSAL Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc or not exceeding 10 Sqm on plan and not exceeding 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in soft/loose soil complete.

M&L PCC 1:3:6 type C-2 using 40 mm graded stone aggregate in foundations, filling and mass-concrete

M&L for precast cement concrete block masonry with solid blocks type C-1, 1:3:6 (20mm graded aggregate set in cement mortar 1:4, exc. 10 cm in width complete.

M&L PCC 1:2:4 type B1 using 20 mm graded stone aggregate in Coping.

Rendering 10 mm thick in cement mortar (1:4) on brick surface , finished the surface fair and smooth without using extra cement complete all as specified and directed.

M & L for Precast reinforced cement concrete type B0, 1:2:4 (using 12.5 mm graded aggregate) complete all as specified and as directed.

M & L for Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

Supply, laying and testing of 200mm internal dia of DWC high density (HDPE) pipe ISI marked (with CM/L No) with and including all fittings and jointing materials for sewage line and laid in trenches as specified.

M & L for Concrete bed type C-2 1:3:6 to drain pipes for 200 mm dia including packing under, and haunching against the sides of pipes after they are laid and tested; in trenches as specified.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required.

Supply and installation of DRDO terchnology Bio Degradable bio digester FRP tanks of 1 cubic meter (1000 ltrs) capacity for 10 users per day including Anaerobic Microbium Inoculum (AMI) 300 liters in barrels, Dimensions of Tank (L) 1000mm x (B) 1000mm X (D) 1000mm

Cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundation filling and mass concrete complete.

Brick work with sub class ‘B’ bricks, Fly Ash curved on plan mean radius not exceeding 6m, built in cement mortar 1:4 complete.

Brick work with sub class ‘B’ bricks in one brick thick honey comb walling, built in cement mortar 1:4 complete.

Loose filling with aggregate of broken bricks of gauge 40 to 80mm in soakage pits, soakage wells, etc complete.

Reinforced cement concrete design mix M-25 (using 20 mm graded stone aggregates) in slabs supported on walls, beams & columns complete (reinforcement to be measured separately).

Providing precast reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in cover slabs (for manholes etc), shelves and similar articles with plain faces including necessary moulds and setting in cement mortar 1:6 complete (reinforcement to be measured separately)

Mild steel TMT bars 10mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete.

Mild steel TMT bars 6 to 8mm dia as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete.

Form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick, for rough finished flat surfaces of concrete complete.

Form work to edges of concrete flats, openings, floors & roofs and sides of RCC/PCC bands in walls and similar work exceeding 5cm but not exceeding 10cm wide for rough finished surfaces of concrete complete.

Mild steel bearing bars, plain, let in and fixed independently in wooden frames, conforming to Fe-410-0 or Fe 310-0 complete.

AREA DRAINAGE M&L PCC 1:3:6 type C-2 using 40 mm graded stone aggregate in foundations, filling and mass-concrete

M&L PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate in Coping.

Rendering 15 mm thick in cement mortar (1:4) on brick surface , finished the surface even and smooth without using extra cement complete all as specified and directed.

INTERNAL WATER SUPPLY S & F Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) complete in all respect all as specified and as directed.

S & F Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete in all respect all as specified and as directed.

S & F 15 litres cast iron automatic flushing cistern, including brackets complete in all respect all as specified and as directed.

S & F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and as directed.

S & F Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete in all respect all as specified and as directed.

S & F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms complete in all respect all as specified and as directed.

S & F PVC connections 15mm size with PTMT nuts of length 300mm complete in all respect all as specified and as directed.

S & F Waste coupling of PTMT (half or full threaded) suitable for urinals, (Minimum weight 32mm-45gms complete in all respect all as specified and as directed.

S & F Push tap any colour high pressure of PTMT screwed for iron pipe and fixed suitable for urinals, (Minimum weight 15mm-50gms) complete in all respect all as specified and as directed.

S & F Vitreous China wash basin, angle back, size 600x480mm white complete in all respect all as specified and as directed.

S & F Cast iron nahani trap of dia 100 mm, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete in all respect all as specified and as directed.

S & F 500 litres Plastic water tank of approved quality complete in all respect all as specified and as directed.

Supplying and laying of 16mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supplying and laying of 20mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supplying and laying of 25mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supplying and laying of 32mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S&F of brass elbow of 16mm outer dia for CPVC pipes complete all as secified and directed.

S&F of brass elbow of 20mm outer dia for CPVC pipes complete all as secified and directed.

S&F of brass elbow of 25mm outer dia for CPVC pipes complete all as secified and directed.

S&F of brass elbow of 32mm outer dia for CPVC pipes complete all as secified and directed.

S&F of brass Tee of 16mm outer dia for CPVC pipes complete all as secified and directed.

S&F of brass Tee of 20mm outer dia for CPVC pipes complete all as secified and directed.

S&F of brass Tee of 25mm outer dia for CPVC pipes complete all as secified and directed.

S&F of brass Tee of 32mm outer dia for CPVC pipes complete all as secified and directed.

S&F of brass Uinion of 16mm outer dia for CPVC pipes complete all as secified and directed.

S&F of brass Uinion of 20mm outer dia for CPVC pipes complete all as secified and directed.

S&F of brass Uinion of 25mm outer dia for CPVC pipes complete all as secified and directed.

S&F of brass Uinion of 32mm outer dia for CPVC pipes complete all as secified and directed.

S & F Pillar taps of PTMT any colour high pressure screwed for iron pipe (Minimum weight 15mm-120gms) and fixed complete in all respect all as specified and as directed.

S & F Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms/20mm 125gms) complete in all respect all as specified and as directed.

M/S LG BUILDERS (BID ID -3312504)

M/S RUSTAM ALI (BID ID -3312506)

M/S YAIPHABA ENTERPRISES (BID ID -3318858)

M/S MOHANPASARI (BID ID -3318798)

M.P.SUPPLY (BID ID -3318952)

R K ENGINEERING ASSEMBLE (BID ID -3319013)