PROVIDING GYM EQUIPMENT

Supply, Delivery and Commissioning of Sky walker-1700 mm (1) X 830 mm (W) x 1650 mm (H) Metal All pipes mate should be Tata or Jindal. All pipes should be of "B" class" medium grade as per 151239 are galvanized and zinc dipped. Prior to finishing all welded Joints should scalloped as necessary and welded to an approved MIG process is d metal parts should be coated using primer for GI up to 40 microns follwed try powder coating to the thickness of 80-120 microns. is dressed of removing all sharp edges and burrs. All Powder and Primer should be of Actuzonobel make.80mm NB: Prime Stand. Duly bend with CUR 250mm, 32mm NB:- Handle frame 25mm NB:- Handle duly bond with CLR115mm. Square pipe 50x50x3 mm Paddle footrest frame, Seamless pipe 95mm 3D and 105mm OD:- I frame, The foundation used for fixing is a structure and made from center G.1. pipe of 68 mm OD, Welded with M.S. round plate of 0250 mm & 10mm thick. Main pipe supported with 25 mm X 25mm of M.S. angles of 3 mm thickness and 20mm x 40mm CRC square smooth rotation, and does not require relubrication Le, maintenance-free ball bearing. Fins should be case hardened and centreless quare pipes of 2mm thickness. Bearings and Pins:- Bearings 6205 and 6203 should be of SKF 2RS1 type and press fitted for finish for life long durability. Footrest Foorests are of aluminum pressure casted having slee 305x125x25 (LxWxH) with thickness 4.0 mmand of matertal of grade ADC-12. Pipe end close cap, bearing cap: SS 304 grade Should be used for protection of pipe and closing duty riveted, bearings and bushes open end closed. Cap Height for 100 NB 57 mm and for 50 NB-54 mm. Instruction Sticker Name of Department" Rivelable Instruction sticker 0.8 mm thick 55 304 grada material of size 90mm x 160mm duly laser marked with how to use instructions and tender authority name with logo along with manufacturer details. Customer redressal contacts should be printed on every sticker Safety & Maintenance: All products of equipment should be tested as per EN15636 safety norms and ce certification must. Maintanance should be followed as per EN 16630 guidelines. The equipment should be withstand for the weight of user more than 100Kg.

Supply, Delivery and Commissioning of Tripple seating Twister 1800 mm (L) X 540 mm (W) X 1430 mm (H)Metal:- All pipes make should be Tata or Jindal. All pipes should be of "B" class" medium grade as per IS1239 are galvanized and zinc dipped. Prior to finishing all welded joints should scalloped as necessary and welded to an approved MIG process is dressed of removing all sharp edges and burrs. All metal parts should be coated using primer for GI up to 40 microns follwed by powder coating to the thickness of 80-120 microns. Powder and Primer should be of Ackzonobel make. 100mm NB:- Prime Stand Centre plpe.80mm NB:- Standing twister plate support. 50mm NB:- Seating twister plate support.32mm NB:- Bottom frame, support.25mm NB:- Handle frame ring, Foot resting frame. The foundation used for fixing is a structure and made from center G.I. pipe of 88 mm OD. Welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe supported with 25 mm X 25mm of M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 2mm thickness. Bearings and Pins:- All bearings should be of SKF make 2RS1 type 6007 and 30206 bearings are used, press fitted for smooth rotation, and does not require relubrication i. e, maintenance-free ball bearing. Pins should be case hardened and centreless grinded finish for life long durability. Pipe end close cap, bearing cap SS 304 grade Should be used for protection of pipe end desing duly riveted, bearings and bushes open end closed. Cap Height for 100 NB-57 mm and for 80 NB-54 mm. Base Cover:-SS 304 grade material is used for base cover duly bolted. Size of cover is of Diameter 280 mm with height of 88 mm and 0.8 mm thick. Instruction Sticker - Rivetable Instruction sticker 0.8 mm thick SS 304 grade material of size 90mm x 160mm duly laser marked with how to use instructions and tender authority name with logo along with manufacturer detalls. Customer redressal contacts should be printed on every sticker

Filling Sand in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH . The rate including cost and conveyance of all material, labour charges for filling, watering, ramming, etc., complete as per SS and as directed by the departmental officer in charge of the work but excluding seigniroage charges.

Supply, Delivery, Installation and Commissioning of Two seater Arc Swing3" (Model по GPE-37) Агеa 1.25 MX 3.0 M, Metal:- All pipes make should be Tata or Jindal-Galvonised Iron Side support pipe Size are 80 NB and Center Pipe Size are 50 NB All pipes should be of "medium grade" as per IS1239 are galvanized and zinc dipped Prior to finishing all welded joints should scalloped as necessary and welded to an approved MIG process is dressed of removing all sharp edges and burrs. All metal parts should be coated using primer for Gl up to 40 microns follwed by powder coating to the thickness of 80-120 microns Powder and Primer should be of Ackzonobel make Bearing - The bearings used are "6202" permanent lubricated sealed bearing of repute brand Bearings are mounted in specially designed M.S. bush Safety & Maintenance-All products of equipment should be tested as per EN1176 safety norms and ce certification must. Maintanance should be followed as per EN 1176 guidelines. The equipment should be withstand for the weight of user more than 100Kg and EN 16630 CE Certified Equipment complete as per SS and as directed by the departmental officer incharge of the work.

Supply, Delivery, Installation and Commissioning of f.r.p box slide (Model no: GPE-58) Area 0.5 M X 4.8 M Metal - All pipes make should be Tata or Jindal-Galvonised Iron Support pipe Size are 50 NB and handrail Pipe Size are 25 NB. All pipes should be of "medium grade" as per IS1239 are galvanized and zinc dipped. Prior to finishing all welded joints should scalloped as necessary and welded to an approved MIG process is dressed of removing all sharp edges and burrs. All metal parts should be coated using primer for Gl up to 40 microns follwed by powder coating Ackzonobel make. Bearing - The bearings used are "6202" permanent lubricated sealed bearing of repute brand. Bearings are mounted in specially designed M. S. bush Safety & Maintenance -All products of equipment should be tested as per EN1176 safety norms and ce certification must. Maintanance should be followed as per EN 1176 guidelines. The equipment should be withstand for the weight of user more than 100Kg and EN 16630 CE Certified Equipment, complete as per SS and as directed by the departmental officer incharge of the work

Plain Cement concrete (1:4:8) using 40 mm metal with concrete mixer. All work upto plinth level including cost of all materials and labour charges etc., complete as per SS and as directed by the departmental officer in charge of the work but excluding seigniorage charges.

Providing Concrete for plain/ reinforced concrete (1:2:4) Nominal mix using 20 mm nominal size graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including cutting for 14 days complete as per drawings and technical specifications as per SS and as directed by the departmental officer in charge of the work but excluding seigniorage charges

Assistant Engineer

Tuni Municipality