CA NO CWE/AF AMB/AMB-53/2019-20 SPECIAL REPAIRS TO 20 WARRANT RANK SMQs AT ARJUN ENCLAVE EXTENSION-I AT AIR FORCE STATION AMBALA UNDER GE AIR FORCE AMBALA

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises to a distance not exceeding 500 mtr complete all as specified and directed.

Dismantling of stone slabs/ floor and wall tiles of any description or thickness as in floors, aprons etc laid and bedded in any mortar including rubbish off the premises to a distance not exceeding 500 mtr complete all as specified and directed.

Demolition of plain cement concrete,un-reinforced, in ground floor and paving not exceeding 15 cm thick below or above ground floor including rubbish off the premises to a distance not exceeding 500 mtr complete all as specified and directed.

Demolition of plain cement concrete, un-reinforced of any description and in any position not otherwise specifically provided for including rubbish off the premises to a distance not exceeding 500 mtr complete all as specified and directed.

Dismantling of RCC/PVC water tanks of any description exc 250 ltrs and not exceeding 500 ltrs and removing from site including rubbish off the premises to a distance not exceeding 500 mtr complete all as specified and directed.

Demolition of RCC, of any description and in any position inluding cutting of reinforcement to facilitate demolition and rubbish off the premises to a distance not exceeding 500 mtr complete all as specified and as directed.

Dismantling of brick work built in cement mortar including all quoins, pillars etc but excluding ashlar facings, dressed stone work and precast articles and rubbish off the premises to a distance not exceeding 500 mtr complete all as specified and as directed.

Dismantling of brick tiles or concrete tiles single layers on roof and rubbish off the premises to a distance not exceeding 500 mtr including stacking of servicable brick tiles complete all as specified and as directed.

Demolition of mud phuska on roofs, any thickness including mud plastering,whether full thickness removed or only a part thereof and rubbish off the premises to a distance not exceeding 500 mtr complete all as specified and as directed.

Demolition of breaking up drain/ water pipes of AC/RCC/PVC of 100/75mm bore including all fittings etc complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water including removal of debries to distance n.exc 500 mtr complete all as specified and directed.

Taking up or down steel water tubing and connections for refixing or removal from site for 15 mm bore pipe complete all as specified and directed.

Taking up or down steel water tubing and connections for refixing or removal from site for 20 mm bore pipe complete all as specified and directed.

Taking down chowkhats or frames n.exc 1.5 sqm each with shutters without taking off shutters from the frame and removing from site, including cutting holes for taking out hold fasts and making good disturbed portion in cement mortar 1:3, complete all as specified and as directed

Taking down chowkhats or frames exc 1.5 but n.exc 4 sqm each with shutters without taking off shutters from the frame and removing from site, including cutting holes for taking out hold fasts and making good disturbed portion in cement mortar 1:3, complete all as specified and as directed

Taking down shutter n.exc 1.0 sqm each removing from site and making good disturbed portion complete all as specified and as directed

Taking down shutter exc 1 sqm but n.exc 2 sqm each, window shutters, cup board shutter, show case shutter, drawer etc , easing , adjusting piano type hinge, knob, handle and refixing in same or other location with and including new butt hinges of suitable size & Nos with new screws complete all as specified and as directed

Cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) complete all as specified and as directed

Running welding in repairs to hinges of steel window/pressed steel door and making good the surfaces , thickness of metal to be welded exc 6 mm but not exc 9 mm complete all as specified and as directed.

Welding in repairs n. exc 2.5 cm in length, thickness of metal to be welded exc 6 mm but not exc 9 mm complete all as specified and as directed.

Roughening surface of old concrete floor by picking sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry @ 3.0 Kg/Sqm complete all as specified and as directed

Material and labour for PCC 1:5:10, type E-2 using 40mm graded mechanically crushed stone aggregates as in sub base of floors complete all as specified and directed.

Material and labour for 25mm thick PCC 1:2:4 type B0 using 12.5 mm graded mechanically crushed stone aggregates as in floor finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for RCC 1:2:4 type B-1,nominal mix using 20 mm graded mechanically crushed stone aggregates as in fins, fascia louvers, parapet and railing complete all as specified and as directed.

Material and labour for PCC 1:2:4 type B-0 using 12.5mm graded mechanically crushed stone aggregates as in padding on roof to maintain the required slope & finished the surfaces even and smooth without using extra cement complete all as specified and as directed.

Material and labour for 75mm thick PCC (1:3:6) type C-1 using 20mm graded mechanically crushed stone aggregate as in plinth protection finished even and smooth without using extra cement with & including 10mm wide, 30mm deep joints at the rate of 3.00 mt centre to centre and at every turning & filling the joints with bitumen & sand mixture complete all as specified and as directed. Notes :- (i) The unit rate quoted shall be deemed to include for providing the concrete in alternate bays not exceeding 3 Mtrs length,12 mm wide. (ii) 50 mm deep joints between the bays shall be provided which shall be filled with mastic filling with hot bitumen 85/25 grade and 1:2 mix volume.

Material & Labour for repair to chajjas/ roof projection with plain cement concrete 1:2:4 type B-0 using 12.5 mm graded mechanically crushed stone aggregates and dubbing out with 20 mm avereage thickness including necessary form work after taking down/ demolition of loose portion/ part/ particles & rendering with 5 mm thick in cement mortar 1:3 and finishing the exposed surfaces even & smooth using extra cement complete all as specified and as directed.

Use and waste of form work to chajjas, fins, facia and similar works for rough finished surfaces of concrete complete all as specified.

Material and labour for Brick work with sub class B bricks of old size, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and as directed.

Material and labour for Brick work straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 using old bricks retrieved from srl No 07 hereinbefore after cleaning and washing complete all as specified and as directed.

Material and labour for Brick work with sub class B bricks of old size, straight or curved on plan to any radius in half brick thick wall, built in cement mortar 1:4 complete all as specified and as directed.

Material and labour for 40 mm thick brick tiles laid on roofs, jointed and grouted flush in CM 1:3 mixed with linseed/crude oil @ 5% by weight of cement over and included 15 mm thick screed bedding in cement mortar 1:6 complete all as specified and as directed.

Brick tiles laid on roofs using old tiles retrieved from srl No 08 here-in-before after cleaning and washing , jointed and grouted flush in CM 1:3 mixed with linseed/crude oil @ 5% by weight of cement over and included 15 mm thick screed bedding in cement mortar 1:6 complete all as specified and as directed.

Material and labour for coloured, non- skid joint free,edge cut, ceramic tiles,1st quality, 7 to 8 mm thick ,square/ rectangular, area of each tile exceeding 0.06 but not exceeding 0.11 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 15mm thick screed bed or bedding layers in Cement Mortar 1:4, complete all as specified and directed.

Material and labour coloured, non- skid joint free,edge cut, ceramic tiles,1st quality, 7 to 8 mm thick ,square/rectangular, polished, area of each tiles exceeding 0.11 but not exceeding 0.18 Sqm in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 15mm thick screed bed or bedding layers in Cement Mortar 1:4, complete all as specified and directed.

Material and labour coloured, non- skid joint free,edge cut, ceramic tiles,1st quality, 7 to 8 mm thick ,square/rectangular, polished, area of each tiles exceeding 0.11 but not exceeding 0.18 Sqm on vertical surfaces as in skirting/ dado, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in Cement Mortar 1:4 complete all as specified and as directed.

Material and labour for jointfree glazed designer ceramic coloured tiles of size 300x450x7-8 mm thick on vertical surface as in skirting/dado, set and jointed in neat cement slurry & pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 on brick / concrete walls complete all as specified and as directed. Notes for item No 34 to 37 :- (i) The rates includes for all straight cutting and waste including raking or circular cutting complete. (ii) All corners in wall tiling should be properly metred jointed to give monolithic uniform apprearance. (iii) The rates for tiling includes for laying to any pattern with one or more colour as directed. (iv) If tiles of different sizes are used then no price adusjtment shall be made.

Material and labour 18-20 mm thick pre-polished granite stone slab of approved shade and colour as in kitchen slab/platform, steps, cills etc including vertical projection, rounding or chamferring the edge laid over and including screed bed 20mm thick in CM 1:6 jointing , pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite and rubbing polish to achieve mirror finish complete all as specified and directed.

Material and labour for rendering 15 mm thick in CM 1:6 finished even and smooth without using extra cement on fair faces brick or concrete surfaces complete all as specified and directed.

Material and labour for rendering 15 mm thick in CM 1:4 mixed with WPC @ 2 % by weight of cement finished even and smooth without using extra cement on fair faces brick or concrete surfaces complete all as specified and directed. Note : WPC shall be measured and paid separately as supply only.

Material and labour for rendering 5 mm thick in CM 1:3 on the soffits of slab/chajjas/sunshade etc finished even and smooth without using extra cement complete all as specified and directed.

Supply only liquid integral water proofing compound complete all as specified and as directed.

Supply and fixing sheet glass 3mm thick ordinary quality and glazing with oil putty in squares not exc 0.5 sqm in each pane fixed with oil putty or wooden beads including provision of glazing pins/ spring clips wherever necessary complete all as specified and as directed.

Supply and fixing 3mm thick figured glass, pin head type glazing as in square n.exc 0.5 Sqm in each pane fixed with oil putty or wooden beads including provision of glazing pins/ spring clips wherever necessary complete all as specified and as directed.

Supply and fixing Factory made solid PVC Chowkhat /Door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5 mm thick rigid PVC foam sheet coloured, reinforced with 19x19mm MS square tube of 19 gauge including rubber gasket, PVC fasteners, screws, brackets as per SSR Part –II (2010) complete all as specified and as directed.

Supply and fixing second class hard wood glazed and skeleton shutter 35mm thick, factory made, open rebated and prepared to receive glass/guage etc, without sash bars, mitred and rebated, with edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/guage etc, sizes of stiles, rails etc as specified in Section 8, clause 8.24(a) of SSR part-I(2009) complete all as specified and as directed.

Supply and fixing Plain framed, panelled shutter (two panel) 35 mm thick, factory made, with lock rail and panel of 12 mm veneered particle board with commercial veneering on both faces,the size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

Supply and fixing factory made solid panel PVC door shutter 30 mm thick consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification vide clause 8.34.2 of MES SSR Part I 2009 and Preambles 8B.2 of MES SSR Part II 2010, complete all as specified and as directed.

Supply and fixing 18/19 mm thick block board, grade 2 quality, interior grade, commercial type , fixed with screws to frame work as in cup board shelves and shutters after taking down/out board as existing at site complete all as specified and as directed.

Supply and fixing fancy type MS curtain rod 20 mm bore ,coloured powder coated of approved shade with and including MS powder coated bracket knobs (two nos for each cut length), funnel on ends (two nos for each cut length) and suitable PVC rings of 1st quality after taking down/out rod as existing at site complete all as specified and as directed.

Supply and fixing stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks or stainless steel wire staple complete all as specified and directed.

Supply and fixing butt hinges, medium weight cold rolled mild steel 100 mm size welded to angle iron frames or fixed with screws to wooden frames complete all as specified and as directed.

Supply and fixing butt hinges, medium weight cold rolled mild steel 50 mm size welded to angle iron frames or fixed with screws to wooden frames complete all as specified and as directed.

Supply and fixing Mild steel pressed handle, oval type, stove enamelled black 150mm long, complete all as specified and as directed

Supply and fixing 200 mm long Mild steel barrel tower bolt , stove enamelled black with bright bolt complete all as specified and directed

Supply and fixing 300 mm long Mild steel sliding door bolt ,plate type,stove enamelled black with bright bolt not less than 12 mm dia with & including a minimum of 6 bolts and nuts ,four on bolt plate & two on staple plate complete all as specified and as directed.

Supply and fixing second class hard wood small fittings such as brackets of any type, latch and hinges blocks, shaped doors and windows stops and the like, including all necessary labour, articles not exc 200 cucm each complete all as specified and as directed.

Supply and fixing MS chromium plated bracket holder,bracket, funnel etc suitable for curtain rod 20 mm bore including fixing with screws as in pelmet or on other places complete all as specified and as directed.

Supply and fixing magenetic catcher ISI Mark of standard size and quality complete all as specified and directed

Supply and fixing 20mm dia cup board knob of mild steel bright finish, of approved quality with nuts & washers complete all as specified and directed

Supply & fixing 300mm Mild steel ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and as directed

Supply and fixing continuous piano type hinge, mild steel bright finish or electro galvanised, width of flap 25/30mm when open complete all as specified and as directed.

Supply and fixing mild steel framed work as in door of angle or other sections with gusset plates, rails, braces etc, using ornamental design as approved complete drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and including either hooks and purpose made hinges or steel hanging door fittings exclusive of steel sheeting or other covering, running rails and guides and hanging, fastening and fixing complete conforming to Fe 410E, Gde E-250 complete all as specified and as directed. Note :- Flat iron hold fasts shall be measured & paid separately.

Supply and fixing factory made Box type steel window, double shutter (glazed and wire gauzed) with side hung shutters including box type hinges, steel handles fabricated type for each leaf duly welded, mild steel barrel tower bolts 150mm size (02 Nos for each leaf) duly welded, complete with glazing bars dovetailed or welded including MS fillets, including provision and welding of guard bars including one shop coat of red oxide primer over window, frame & guard bars complete all as specified and directed. Notes: - (i) Windows shall be fabricated as per HQ CE Chandigarh Zone drawing No. TD-219 Sh 1/3 to 3/3 dated 02 Jan 2007 with one amendment dated 22 Jun 07 in Sh 1/3 , dt 15 Jun 07 in sh 2/3 & 3/3 and these drgs may be referred from GE office or from the office of CWE (AF) Ambala. (ii) Glazing & Wire cloth shall be measured and paid separately as S&F and guard bars shall be measured and paid separately as Supply only. (iii) The term double shutter stated is meant for providing glazed shutter as well as wire gauged shutter on outside & inside of the frame respectively.

Supply only of MS work as in guard bar welded to window frame conforming to Fe-290 Gde-E-165 complete all as specified and directed.

Supply and fixing steel ventilator with top hung shutters, factory made IS 1038-1983 & IS 7452 - 1990 including hinges, peg stays with glazing bars etc with & including one shop coat of red oxide primer complete all as specified and as directed. Notes: - Glass, wire gauge shall be measured & paid separately.

Material and labour for Mild steel TMT bars ,Fe 500 D, 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Supply and fixing galvanised mild steel water tubes 15 mm bore, medium grade, galvanised with all fittings and fixed complete to wall and ceiling or laid in floor complete all as specified and as directed.

Supply and fixing galvanised mild steel water tubes 20 mm bore, medium grade, galvanised with all fittings and fixed complete to wall and ceiling or laid in floor complete all as specified and as directed.

Refixing old steel tubing and connections retrieved from srl No 12 above including cleaning at new or old location with new GI fittings, bore of tubing 15mm bore complete all as specified and as directed.

Refixing old steel tubing and connections retrieved from srl No 13 above including cleaning at new or old location with new GI fittings, bore of tubing 20 mm bore complete all as specified and as directed.

Supply and fixing vitreous china squatting pan ,Orissa pattern, 580mmx440mm, white, with and including PVC ‘P’ or ‘S’ trap front or back inlet with integral foot rests excluding flushing cistern and flush pipe including providing lime concrete bedding and making good to floor complete all as specified and directed.

Supply and fixing in repair PVC low level flushing cistern, white, valveless syphonic action type 10 lts capacity with inlet, ball valve, float and handle including PVC flush pipe 32 mm dia with bend and a pair of mild steel angle iron brackets of suitable size including making necessary connections to water supply pipe line and WC, complete all as specified and as directed.

Supply and fixing in repair sink with drainage board made of stainless steel 1.00 mm thick steel sheet, kitchen or laboratory with plug & chain, waste coupling, washers and 32 mm bore PVC waste pipe including bedding in cement mortar to dwarf wall or including fixing cantiliver MS/PVC brackets and connecting union to pipe over all size 915 mmx460mm bowl size 410x330x 160mm complete all as specified and as directed..

Supply and fixing in repair stainless steel plate rack of size approx 750x 600x 250mm made out of 1.0 mm thick steel sheet complete all as specified and as directed.

Supply and fixing rotational moulded polythene(PVC) water storage tank,HDPE, of white colour, triple layered ,cylinderical type fixed and hoisted in position on roof, at any height, of capacity 500 ltrs and making connections with 20 mm GI pipe inlets & outlets complete including locking arrangements and 20 mm bore ball brass valve high pressure with polyethylene float complete all as specified and directed.

Supply and fixing in repair vitreous china wash hand basin ,oval type, white, of size 630X450mm including 32mm bore PVC waste pipe and CP waste fitting and a pair of mild steel angle iron brackets of suitable size fixed in counter slab complete all as specified and as directed.

Supply and fixing in repair 15 mm dia pillar tap , fancy type, brass chromium plated with capstan head chromium plated screwed down high pressure with or without lettered “hot' or 'cold” with long screwed shank and flynut screwed complete all as specified.

Supply and fixing in repair stop valve 15mm bore, brass, screwed down high pressure with crutch or butterfly handle screwed both ends complete all as specified and as directed.

Supply and fixing 15mm dia stop valves cast copper alloy chromium plated (Concealed type) fancy type long shank and cup with capstan head and cup screwed both ends for iron pipe or for union including cutting chases for concealing after taking down valve as existing at site complete all as specified and as directed.

Supply and fixing in repair angle valve 15mm bore, brass, screwed down high pressure with crutch or butterfly handle screwed both ends complete all as specified and as directed.

Supply and fixing in repair bib taps 15 mm bore, brass, chromium plated, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

Supply and fixing in repair brass Chromium plated shower rose, fancy type,suitable for 15 mm boe pipe with or without swivel joints any size including fixed to steel pipe or union complete all as specified and as directed.

Supply and fixing brass chromium plated towel rail 20mm dia ,fancy type, 60cm long,superior quality , between flanges fixed to wall with brass CP screws after taking down/out as existing at site complete as specified and directed.

Supply and fixing soap dish ,brass, chromium plated,size 160 x 160 x90 mm fixed with and including plugs with brass CP screws after taking down/out as existing at site complete all as specified and as directed.

Supply and fixing sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long after taking down/out as existing at site complete all as specified and as directed.

Supply and fixing chromium plated grating 100mm dia fixed complete all as specified.

Supply and fixing in repairs PVC connection 450mm long with 2 nos PTMT check nuts, suitable for 15mm bore complete all as specified and directed

Supply and fixing in repairs PVC connection 600mm long with 2 nos PTMT check nuts, suitable for 15mm bore complete all as specified and directed

Supply and fixing PVC (SWR) pipe 110mm bore single socketed in any length with rubber ring joints, laid in trenches or in floors, fixed to wall with suitable size FI clamps of size 25mmx3mm, complete all as specified and as directed.

Supply and fixing PVC (SWR) bends any radius, for 110mm bore of pipe complete all as specified and as directed.

Supply and fixing PVC (SWR) branch piece,110mm bore single Y , equal or unequal complete all as specified and as directed.

Supply and fixing PVC (SWR) gully trap 125x110 mm ,made of type-B pipes ,setting and jointing with solvent cement complete all as specified and as directed.

Supply and fixing UPVC floor trap 75mm dia plain with PVC grating,type-B pipes including jointing to waste pipe with solvent cement complete all as specified and as directed.

Material and labour for APP polymeric water proofing treatement to roof, at any height, using membrane minimum 3 mm thick and weighting not less than 3.6 kg per sqm , black finish reinforced with non-woven polyster matt weighting not less than 150 gms per sqm with thermo fusible finish laid by force application after applying compatible bitumen primer at the rate of 0.40 Ltr per Sqm, torching over laps with a propane or butane gas torch with a over lap of 100 mm at the side on transverse direction and 150 mm at the ends on longitudinal direction and sealing including a tack coat of hot blown bitumen 85/25 @ 1.2 Kg per sqm below APP complete all as specified and as directed . Notes:- (i) The water proofing treatment shall be got carried out by the manufacturer or their authorised applicators duly approved by GE in writing. (ii) 5% amount of the total amount of water proofing treatment shall be retained as a guarantee (on account of any defect raised/noticed during a period of ten years) and shall be released after 10 years of completion of work. However contractor may deposit the FDR of same amount in favour of GE. If contractor fails to rectify the defect pointed out during this period , the defect shall be got rectified at contractor's risk and cost and the payment shall be made from the amount kept reserved or by encashing the FDR deposited by the contractor as guarantee. The contractor's quoted rates for this item shall deemed to be inclusive of this aspect.

Material and labour for sunken slab floor after demolition of existing floor including taking out/down WC, trap, tiles etc and providing firstly 10 mm thick plaster in cement mortar 1:4 mixed with Dr fixit bathseal water proofing compound two coats (or equivalent of Fosroc/ Sika), on plastered surfaces over PCC 1:5:10 type E-2 using 40mm graded mechanically crushed stone aggregates in sunken slab and 75 mm thick PCC 1:4:8 type D-2 using 40mm graded mechanically crushed stone aggregates as base , 40mm bore GI pipe, light grade of length not less than 50cm as spout , tiles as per existing pattern/size/tint and WC complete all as specified and as directed. NOTE: Demolition of PCC in sunken floor, WC,tiles shall be measured and paid seperately.

Material and labour for three coats of white wash as in ceiling, on newly plastered surfaces of walls including preparation of surfaces complete all as specified and as directed.

Material and labour for two coats of cement base paint of approved shade/tint,over a coat of primer, on newly plastered surfaces of walls including preparation of surfaces complete all as specified and as directed.

Material and labour for two coats of cement base paint of approved shade/tint,over a coat of primer, on old treated plastered surfaces of walls including preparation of surfaces complete all as specified and as directed.

Material and labour for two coats of Oil bound distemper of approved shade/tint over a coat of primer over JK/Birla white wall care putty of any thickness to achieve smooth finish on newly plastered surfaces of walls including preparation of surfaces complete all as specified and as directed.

Material and labour for two coats of Oil bound distemper of approved shade/tint over a coat of primer over JK/Birla white wall care putty of any thickness to achieve smooth finish, on old treated plastered surfaces of walls including preparation of surfaces complete all as specified and as directed.

Material and labour for two coats of synthetic enamel paint over one coat of red oxide primer on new steel and iron surfaces, of any description including preparation of surface over 10cm width or girth complete all as specified and as directed.

Material and labour for Two coats of synthetic enamel paint on new steel and iron surfaces, of any description including preparation of surface over 10cm width or girth complete all as specified and as directed.

Material and labour for One coat of synthetic enamel paint on old treated steel and iron surfaces, of any description including preparation of surface over 10cm width or girth complete all as specified and as directed.

Material and labour for two coats of synthetic enamel paint over one coat of pink primer on new wood and wooden based surfaces, of any description including preparation of surface over 10cm width or girth complete all as specified and as directed.

Material and labour for preparation of old wooden surface and applying one coat of synthetic enamel paint, of surface, over 10 cm width or girth, complete all as specified and directed.

Taking down carefully copper/aluminium point wiring light/fan/bell/socket or power complete fittings such as switches, sockets, ceiling rose, pendent holders, light fittings etc inluding taking down carefully by unscrewing from board/outlets/DBs/fittings etc such as switches,lamp holdes,brakets,ceiling fittings, bulkhead fittings,sketch fittings, tube light fittings, fan regulators,electric meters, meter bos any type etc and/or drawing out from existing conduit/batten and making good disturbed surfaces of walls/floors/ceilings complete all as specified and as directed .

Material and labour for concealed point wiring with (FRLS) Flame retardant low smoke PVC insulated unsheathed cable 1.5 sqmm with stranded copper conductor, drawn through/in and including non metallic rigid PVC concealed conduit not less than 20mm dia, medium grade, with conduit fittings including all tees, bell mouth tube ends and fixing accessories such as couplers, saddles, pipe hooks etc concealed in wall/ceiling/roof etc with provision of new sunken type pressed steel/welded MS terminal boxes of not less than 1.6mm wall thickness with decorative laminated sheet top cover 3 mm thick (Hylam) including (FRLS) Flame retardant low smoke PVC insulated multistranded copper earth conductor 1.50 sqmm connected to common earth and earth dolly one light/fan point controlled by one way switch 6 amp complete all as specified and as directed.

Material and labour for concealed point wiring with (FRLS) Flame retardant low smoke PVC insulated unsheathed cable 1.5 sqmm with stranded copper conductor, drawn through/in and including non metallic rigid PVC concealed conduit not less than 20mm dia, medium grade, with conduit fittings including all tees, bell mouth tube ends and fixing accessories such as couplers, saddles, pipe hooks etc concealed in wall/ceiling/roof etc with provision of new sunken type pressed steel/welded MS terminal boxes of not less than 1.6mm wall thickness with decorative laminated sheet top cover 3 mm thick (Hylam) including (FRLS) Flame retardant low smoke PVC insulated multistranded copper earth conductor 1.50 sqmm connected to common earth and earth dolly one light point controlled by two way switch 6 amp complete all as specified and as directed.

Material and labour for concealed point wiring with (FRLS) Flame retardant low smoke PVC insulated unsheathed cable 1.5 sqmm with stranded copper conductor, drawn through/in and including non metallic rigid PVC concealed conduit not less than 20mm dia, medium grade, with conduit fittings including all tees, bell mouth tube ends and fixing accessories such as couplers, saddles, pipe hooks etc concealed in wall/ceiling/roof etc with provision of new sunken type pressed steel/welded MS terminal boxes of not less than 1.6mm wall thickness with decorative laminated sheet top cover 3 mm thick (Hylam) including (FRLS) Flame retardant low smoke PVC insulated multistranded copper earth conductor 1.50 sqmm connected to common earth and earth dolly one multi pin socket outlet 6 amp on the independent board complete all as specified and as directed.

Material and labour for concealed point wiring with (FRLS) Flame retardant low smoke PVC insulated unsheathed cable 1.5 sqmm with stranded copper conductor, drawn through/in and including non metallic rigid PVC concealed conduit not less than 20mm dia, medium grade, with conduit fittings including all tees, bell mouth tube ends and fixing accessories such as couplers, saddles, pipe hooks etc concealed in wall/ceiling/roof etc with provision of new sunken type pressed steel/welded MS terminal boxes of not less than 1.6mm wall thickness with decorative laminated sheet top cover 3 mm thick (Hylam) including (FRLS) Flame retardant low smoke PVC insulated multistranded copper earth conductor 1.50 sqmm connected to common earth and earth dolly one multi pin socket outlet 6 amp on the same board with other switches complete all as specified and as directed.

Material and labour for concealed point wiring with (FRLS) Flame retardant low smoke PVC insulated unsheathed cable 1.5 sqmm with stranded copper conductor,drawn through/in and including non metallic rigid PVC concealed conduit not less than 20mm dia, medium grade, with conduit fittings including all tees, bell mouth tube ends and fixing accessories such as couplers, saddles, pipe hooks etc concealed in wall/ceiling/roof etc with provision of new sunken type pressed steel/welded MS terminal boxes of not less than 1.6mm wall thickness with decorative laminated sheet top cover 3 mm thick (Hylam) including (FRLS) Flame retardant low smoke PVC insulated multistranded copper earth conductor 1.50 sqmm connected to common earth and earth dolly one bell point controlled by one bell push complete all as specified and as directed.

Material and labour for concealed point wiring with (FRLS) Flame retardant low smoke PVC insulated unsheathed cable 2.5 sqmm with stranded copper conductor, drawn through/in and including non metallic rigid PVC concealed conduit not less than 20mm dia, medium grade, with conduit fittings including all tees, bell mouth tube ends and fixing accessories such as couplers, saddles, pipe hooks etc concealed in wall/ceiling/roof etc with provision of new sunken type pressed steel/welded MS terminal boxes of not less than 1.6mm wall thickness with decorative laminated sheet top cover 3 mm thick (Hylam) including (FRLS) Flame retardant low smoke PVC insulated multistranded copper earth conductor 1.50 sqmm connected to common earth and earth dolly one 15/16 amp socket outlet multi pin on independent board complete all as specified and as directed. Note for srl No. 109 to 114:- (i) Switches, socket outlet, bell push and fan regulator shall be measured and paid for separately. (ii) Rate quoted shall be inclusive of cutting chases and making good the disturbed surfaces to match with the existing surfaces.

Supply and fixing switch piano, flush type 6 amp, single pole, one way 240 volt complete all as specified and directed.

Supply and fixing switch piano, flush type 6 amp, single pole, two way 240 volt complete all as specified and directed.

Supply and fixing switch piano, flush type 15/16 amp, single pole, one way 240 volt complete all as specified and directed.

Supply and fixing socket outlet, 2 in 1 , 5 pin, 5 amps flush type complete all as specified and as directed.

Supply and fixing socket outlet, 2 in 1 , 5 pin, 5/15 amps flush type complete all as specified and as directed.

Supply and fixing ceiling rose surface bakelite, 65X50 mm three terminals ,230 volts,ISI mark complete all as specified and as directed.

Supply & fixing lamp holder PVC/Polycarbonate type with back plate suitable for batten fitting complete all as specified and as directed.

Supply and fixing bell push single pole one way 5 Amp, 240 volt flush type complete all as specified and as directed..

Supply and fixing call bell ding dong, 230 Volts, single phase complete all as specified and as directed.

Supply and fixing electronic fan regulator socket type,single phase 240 volts grade 350 watts heavy duty including making necessary connections, to make it functional complete all as specified and as directed.

Supply and fixing in replacement MCB, SPN, 5 to 40 Amps, B curve, 10 kA capacity, 240 volts finger proof terminal , bi-connect terminal label holder 35 Sqmm terminal capacity including sliding shutter large two position dolly to be fixed DBs complete all as specified and as directed.

Supply and fixing in replacement MCB, SP, 5 to 40 Amps, B curve, 10 kA capacity, 240 volts finger proof terminal , bi-connect terminal label holder 35 Sqmm terminal capacity including sliding shutter large two position dolly to be fixed DBs complete all as specified and as directed.

Supply and fixing in replacement sheet metal enclosure for mounting and including MCCB 100 amp ,triple pole and neutral, 16 kA, 415 volts with fixed thermal and magnetic setting with 200 Amps rated bus bar, 4 way, double door type flushed inside the wall including making good the disturbed surfaces complete all as specified and as directed.

Supply and fixing in replacement sheet metal enclosure for MCB DBs,230 volts, single pole and neutral with 200 Amps rated bus bar 12 way double door type flushed inside the wall including making good the disturbed surfaces complete all as specified and as directed.

Supply and fixing sheet metal enclosures with socket plug top and MCBs with a two pin, earth plug and socket with one single pole MCB 20 Amp, B curve 240 volts,10kA including making nitch in walls and making good the disturbed surfaces,after taking down/out material as existing at site complete all as specified and as directed.

Supplying & laying for replacement of sub main wiring with two single core FRLS,PVC insulated cable,1100 volts grade, 4 sqmm nominal cross sectional area stranded copper conductor and one single core green FRLS, PVC insulated 2.5 sqmm stranded copper conductor earth continuity cable drawn through with and including non metallic rigid PVC conduit medium grade not less than 25mm bore including accessories concealed in wall/floors/roof etc including cutting chases in wall/ceiling and making good the disturbed surfaces to match of wall/ceiling by plastering & applying two coats of distempering complete all as specified and as directed.. Note :- Two runs of 4 sqmm cable alongwith One run of 2.5 sqmm cable as earth wire with conduit shall be measured as one length.

Supplying & laying for replacement of sub main wiring with two single core FRLS,PVC insulated cable,1100 volts grade, 10 sqmm nominal cross sectional area stranded copper conductor and one single core green FRLS, PVC insulated 6 sqmm stranded copper conductor earth continuity cable drawn through with and including non metallic rigid PVC conduit medium grade not less than 25 mm bore including accessories concealed in wall/floors/roof etc including cutting chases in wall/ceiling and making good the disturbed surfaces to match of wall/ceiling by plastering & applying two coats of distempering complete all as specified and as directed.. Note:- Two runs of 10 sqmm cable alongwith one run of 6 sqmm cable as earth wire with conduit shall be measured as one length.

Supplying, laying, jointing, testing and commissioning under ground electric cable XLPE 1100 Volts grade, heavy duty, PVC insulated screened PVC beeded GI steel strip armoued electric power cable with stranded aluminium conductor, of cross section area 35 Sqmm 3.5 core as in trenches over brick and sand cushioning or along the wall/pole through pipe etc served with an inner sheathing of PVC tape and overall PVC sheathed armoured with galvanized steel wire or tape including taking down of old cable complete all as specified and as directed. Note :- Excavation and earth work, GI pipe, brick and sand cushioning shall be measured and paid separately.

Excavation in trenches not exc 1.5m wide and not exc 1.5m in depth for foundation etc or for walls, shafts, manholes not exc 10 Sqm on plan or for laying pipes/cables etc and getting out, in soft/loose soil complete all as directed

Returning filling in including spreading leveling watering and well ramming in layers not exc 25 cm thick each complete all as specified and as directed.

Removal of surplus soil to a distance not exc 500 mtrs & depositing where directed at a level not exc 1.5 mtrs above the starting point complete all as specified and as directed.

Material and labour for Sand cushioning to cable with a layer of sand 8 cm deep before laying the cable and 15 cms deep after the cable (punned down to 18 cms depth after laying and stretching of cable ) complete all as specified and as directed.

Supply and laying sub class 'B' bricks old sizes over the underground HT/LT cable, laid dry & flat abutting each other with width equal to length of bricks for protection of cable after taking down/out as existing at site complete all as specified and as directed.

Supply and fixing GI pipe 50 mm bore , light grade as in trenches, under road, fixed to wall, with fixing arrangement along the pole, under floor etc including taking down of old pipe complete all as specified and as directed . Noe :- Excavation and earth work shall be measured and paid separately.

Taking down ceiling fan any type, sweep, make from any location and refixing back at desired location after completion of building repair works duly overhauling ,spray painting with one coat of white synthetic enamel paint & writing MES No with black paint including making necessary connection to make it functional complete all as specified and as directed.

Taking down carefully MCB SPN DB/TPN DB including MCBs of any make, from any position/place after disconnecting electric connections & refixing the same after completion of building repair works and making necessary connections to make it functional complete all as specified and as directed.

Taking down carefully eletric meter of any make, from any position/place after disconnecting electric connections & refixing the same after completion of building repair works and making necessary connections from meter to DBs duly mounted on new wooden box of required size, to make it functional complete all as specified and as directed.

Taking down existing Geyser of any capacity, of any make, from any position after disconnecting electric connections, PVC connections inlets & outlets, nuts, bolts from the loation & refixing the same after completion of building repair works and making necessary connections to make it functional after providing new PVC connections, nuts , bolts with washers complete all as specified and as directed.

Supply and fixing in replacement LED tube light fitting 1x18 watt fitting four feet length, 230 volts in commmercial channel with powder coated CRCA sheet housing with opal acrylic diffuser for LED with & including LED tubelight with high efficient LED18 watts in aluminium housing with clear & milky diffuser including connecting with twin core twisted flexible copper conductor cable of suitable size and making necessary connection to make it functional complete all as specified and as directed. Note:- LED fitting should have PF 0.9,CRI>70,L70.

Supply and fixing in replacement indoor decorative LED batten with opal diffuser with inbuilt LED tube 10 watts and driver designed with high transmitting optics for even light distribution IP20 degree protection having length 620mm including connecting with twin core twisted flexible copper conductor cable of suitable size and making necessary connection to make it functional complete all as specified and as directed. Note:- LED fitting should have PF 0.9,CRI>70,L70.

Supply and fixing in replacement LED bulk head 10 watts with pressure die cast aluminium housing high efficient LED enlosed with milky diffuser IP66 protection with & including LED bulb 10 watts and making necessary connection to make it functional complete all as specified and as directed. Note:- LED fitting should have PF 0.9,CRI>70,L70.

Supply and fixing 45 watt LED security light fitting with not less than 100 lumen/watt delivered lumen efficacy supported with LM-79/80, cast alluminium alloy housing IP 66 protection, input voltage range 120-270 volts auto cut off at voltage exceeding 300 volts, autopower on after cutt off with time delay of less than 60 seconds, power factor more than 0.95, surge protection 5 KV internal and 10 KV external, driver current not exceeding 700 mA, driver electrical efficiency not less than 85% at constant current delivery, with secondary optic lense for every LED, with name of manufacturer / logo clearly embossed on housing of every fitting, LED CCT 5700+300 ANSI BIN, with and including GI bracket made out of 40 mm bore pipe light grade of length not less than 1.5 mtr with one bend, including taking down existing light fittings complete all as directed and specified.

Material and labour for earthing complete with galvanized steel earth plate 60 cm X 60 cm X 6 mm thick buried vertically in ground to depth not less than 2.25 metres below ground level, with top edge of earth plate not less than 1.5 m below ground level, connected to earth lead GI wire 4 mm dia upto 7.5 mtrs long by means of bolts, nuts, check nuts and washers of galvanized iron and connection to earthing test point & earth dolly including watering pipe GI 20 mm bore, light grade, including protection pipe GI medium grade 15mm bore for earthing lead, wire mesh, funnel,lugs, salt, charcoal dust, excavation and refilling pit with PCC 1:2:4 type B1, precast RCC cover slab 50 mm thick 1:2:4 type B-1 using XPM reinforcement weighing not less 4kg/sqm in lieu of CI cover with CI frame all as shown in electrical plate No 3 of SSR part-I (2009), including testing on completion including taking down of existing earthing as exists on site all as specified and as directed. Note :-- (i) Any variation in length of earth lead and protection pipe of earth lead shall be adjusted through DO. (ii) On testing if the earth resistance is not obtained, earthing will be generated at NO extra cost ,till the desired earth resistance is obtained.

Deduction of Total of Sch of credit amount Rs 1,74,890.00

M/S SHANTI CONSTRUCTION

Bairagi Builders

M/s Mangal Construction Co.

Gupta Enterprises

Bhagwan Dass and Sons

M/S JAISANT CONSTRUCTION CO.

Puneet Sharma

amtoindia