Supply, installation, testing and commissioning of Electrical installations related work for proposed in extension of existing Corporate Office premises – Phase 1 – As per drawing

ESTIMATE FOR PGVCL CORPORATE OFFICE PHASE -1

No SORNo Description Unit. Qty Amount

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length , in below

type of pipe erected with 6A Modular type switch / bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose / H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling complete

1 SWITCH -1 LIGHT Cat. III Pt. 18 445

Point wiring for Tissino / Modular secondary light point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires, in below

1-2-1 1-1- type of pipe to be erected complete with earth continuity and necessary connection with primary

4. light with accessories erected on Metal / PVC / wooden box covered with 3 mm thick

PC(Polycarbonate) / Acrylic sheet for open / concealed wiring. with necessary Lamp holder / ceiling

rose / H.D.Connector as directed.

Note:- Maximum up to 6 mtrs length, excess will be considered as Mains for Secondary Point.

(a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling complete

1 SWITCH - 2 LIGHTCat. III Pt. 94 576

Point wiring for Tissino / Modular secondary light point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires, in below

1-2-1 1-1- type of pipe to be erected complete with earth continuity and necessary connection with primary

4. light with accessories erected on Metal / PVC / wooden box covered with 3 mm thick

PC(Polycarbonate) / Acrylic sheet for open / concealed wiring. with necessary Lamp holder / ceiling

rose / H.D.Connector as directed.

Note:- Maximum up to 6 mtrs length, excess will be considered as Mains for Secondary Point.

(a+a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling complete

1 SWITCH - 3 LIGHT Cat. III Pt. 19 747

Point wiring for Tissino / Modular secondary light point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires, in below

1-2-1 1-1- type of pipe to be erected complete with earth continuity and necessary connection with primary

4. light with accessories erected on Metal / PVC / wooden box covered with 3 mm thick

PC(Polycarbonate) / Acrylic sheet for open / concealed wiring. with necessary Lamp holder / ceiling

rose / H.D.Connector as directed.

Note:- Maximum up to 6 mtrs length, excess will be considered as Mains for Secondary Point.

(a+a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling complete

1 SWITCH - 5 LIGHT Cat. III Pt. 1 1088

Point wiring for Tissino / Modular secondary light point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires, in below

1-2-1 1-1- type of pipe to be erected complete with earth continuity and necessary connection with primary

4. light with accessories erected on Metal / PVC / wooden box covered with 3 mm thick

PC(Polycarbonate) / Acrylic sheet for open / concealed wiring. with necessary Lamp holder / ceiling

rose / H.D.Connector as directed.

Note:- Maximum up to 6 mtrs length, excess will be considered as Mains for Secondary Point.

(a+a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling complete

1 SWITCH - 6 LIGHT Cat. III Pt. 4 1259

Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC /

6 1-2-4. Metallic/Wooden box, single mounting base frame covered with textured / metallic/white front plate

modules erected on / in wall / ceiling with following type accessories

Cat. III Pt. 97 255

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in below type of pipe

7 1-2-3. erected complete with Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden box

covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with

following type of accessories.

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb db board

(a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling complete

Cat. III Pt. 53 471

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of .ISI marked

KV Grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in below type of pipe

erected with 6A Modular type switch and hum free EME step type electronic fan regulator mounted

and accessories with earth continuity of following type erected on PVC / Metallic/Wooden box, single

mounting base frame covered with textured/metallic/white front plate modules erected on / in wall /

ceiling as per pipe erected. with necessary ceiling rose / H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling complete

Cat. III Pt. 39 632

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length , in below

type of pipe erected with 6A Modular type switch / bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose / H.D.Connector as directed.

ESTIMATE FOR PGVCL CORPORATE OFFICE PHASE -1

No SORNo Description Unit. Qty Amount

(a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling complete

For light duty ex. Fan

Cat. III Pt. 36 445

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length , in below

type of pipe erected with 6A Modular type switch / bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose / H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling complete

For havy duty ex. Fan

Cat. III Pt. 1 445

Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve) having

KA breaking capacity & confirms to IS : 8828 in existing box having following capacity

Cat. III Ea. 25 297

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with

sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of

(A) With medium class Rigid PVC pipe and accessories

(c) 3 wire 1.5 sq. mm Mtr 500 82

(d) 3 wire 2.5 sq. mm Mtr 800 101

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper

13 1-4-2. conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size

(A) (A) with medium class Rigid PVC pipe and accessories

(d) 3 wire 4 sq. mm Mtr 550 141

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on

single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to

IS: 513/CRCA/aluminium pressure die cast powder coated and high U.V. & corrosion resistance

with diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity between

the ranges shown.)

(A) Square/ Circular shaped Surface/Recessed Mount Downlight with provision for spring loaded

mounting clips complete.IP20

(iii) 16 watts, Surge-2 KV

Cat. III Ea. 237 584

(H) Mirror Light 9 Watts, wall mounted minimum 1 feet long Ea. 28 309

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on

single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to

IS: 513/CRCA/ aluminium die cast powder coated and high U.V. & corrosion resistance with diffuser

with company mark/name 160V to 270V, Power Factor more than 0.95, THD < 15%,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity between

the ranges shown.)

(A) Tube Light with integral driver

(ii) 12 Watts, Surge-2 KV, IP-20, conventional 4 feet

Cat. III Ea. 26 198

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on

single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to

IS: 513/CRCA/aluminium pressure die cast powder coated and high U.V. & corrosion resistance

with diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity between

the ranges shown.)

(B) LED Panel Light with provision for Plane front frame with translucent cover fixed to housing

(v) 24 watts, 12" x 12" , Surge-2 KV

Cat. III Ea. 25 1777

ESTIMATE FOR PGVCL CORPORATE OFFICE PHASE -1

No SORNo Description Unit. Qty Amount

Outdoor street light fitting side entry with clear acrylic /plastic / polystyrene cover complete with

17 2-7-5. starter, polyester choke copper wound complete erected with 40/36 watt tube holders. with lead wire

and connections.

(a) With 1 tube 40 watt.120 cms

Cat. III Ea. 5 933

Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan with double ball bearing ISI

mark with Condenser 230 volt A.C. 50 Hz 1200 mm sweep complete having 3blades with

aluminium blades with , canopy & 30 cm. down rod erected with earthing.(Make shall be approved by

Engineer in charge))

Supplying & erecting approved make low noise decorative exhaust fan having square frame ABS

body with inbuilt lowers & square frame.

250mm with 1350 RPM Cat.II Ea. 30 1353

Supplying & erecting single phase approved make industrial exhaust fan suitable for medium duty

20 5-3-4. ring mounted low noise operation suitable for medium duty having following dia size and maximum

[B] 380 mm dia 900 RPM

Cat. II Ea. 1 2713

21 MR -- DO -- Celling Fitting type Ea. 6 5503

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted

fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &

without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB

to be used) suitable for

(A) single phase incoming and horizontal single phase outgoing

(ii)6 way Ea. 2 577

(iv)12 way Ea. 6 859

Supplying & erecting Sheet Steel powder coated Cable end termination Box to be mounted on Top

23 3-11-6. or Bottom of the MCB Distribution Box for housing/covering Extra wires & Cables, suitable for

following size of MCB DB Box.

(G) Three Phase 8 Way Ea. 1 683

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on 240 V

24 3-10-1.(B) A.C. system and having breaking capacity 10 KA to be erected in existing box. confirming to IS

8828/1996 with ISI Mark

Cat. III Ea. 78 111

Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve) having

KA breaking capacity & confirms to IS : 8828 in existing box having following capacity

(A) 6 to 32 Amp.

Cat. III Ea. 20 297

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA

breaking capacity & confirms to IS :8828 in existing box having following capacity

Cat. III Ea. 4 730

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking

capacity ICU of 25 KA. at 415 V,having normal current rating up to 25 A to 100A. with Fixed thermal

& magnetic release suitable to work on A.C. supply 50 c/s. with all internal connections, spreader

tinned copper & complete erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III Ea. 1 6112

Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper cable 1.1 KV grade to be erected

as directed of following size.

(A) 2 core 2.5 Sq. mm Mtr 350 100

(L) 4 core 6 Sq. mm Mtr 150 361

Providing & erecting weather proof, dust & vermin proof, floor mounted front operated indoor type

cubical panel board necessary IP-42 and above protection as per approval from engineer incharge

made from 14 SWG thick CRC M.S. sheet for outer body & doors, 16 SWG thick CRC M.S.sheet for

internal partitions with necessary accesories , supporting angles/ flats channel including cutting,

bending, drilling, welding, riveting with internal partitions & cable alley as per requirements &

instruction of engineer-in-charge with erection of

supplied switch gears, BUSBARS, suitable size of inter connecting PVC copper wire / copper-

aluminium strips, rubber grommets, rib, bakelite control fuses/MCB for measuring instruments, earth

bus & earth bolts, foundation flange - bolts-base Plates, sufficient nos. of hinged doors, handles with

locking arrangement and rubber gasket,heavy duty end terminal connection,danger notice

board,necessary ventilation,earthing strip complete. The Panel shall be painted with epoxy powder

(The rates excludes the cost of switchgears, bus bars, inter connecting mains & Copper Aluminium

strips, meters, Fuses etc. The dimension shall be measured excluding base beams) The panel shall

be supplied with following approved manufacturers with following size.

(A) locally fabricated panel board

(i) with 350 mm depth Sq.Mtr 1 10365

Supplying and erecting triple pole & neutral 440V/ 500V panel mounting Aluminium Busbars with four

equal Nos. of bus having current density not more than 0.8 Amp. / sq.mm (Rated current / cross

30 3-8-1. section area) duly wrapped with colour insulating tape for phase sequence of following current

carrying capacity, erected with necessary bus bar supports /insulators, main cable socket to each

busbar,erected in existing cubical panel with necessary connections.

(A) Suitable for 100 Amp. Capacity Rn.Mtr 1 654

ESTIMATE FOR PGVCL CORPORATE OFFICE PHASE -1

No SORNo Description Unit. Qty Amount

Supplying & erecting in earthpit of minimum bore dia. 225mm size approved make Safe Earthing

Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free hot dipped

G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron galvanising, Inner pipe dia of

mm having 200-250 Micron galvanising, connection terminal dia of 14 mm with constant ohmic

value surrounded by highly conductive compound with high charge dissipation suitable for following

type of applications with chamber and heavy duty cover (A)(approved make OEM has to submit test

certificate including value of earth resistance of installation duly stamped and signed by agency and

officer Incharge has to ensure the value of earthing resistane mentioned in test Certificate) & having

back filling compound of (B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter testing

as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C) Back

fill Compound :- Earthing compound should be capable to retain moisture for long time Necessary

test report must be submitted by Agency.

[C] For Electrical Installation covering Transformer Neutrals, Lightning arrester Earthing, A.C.Plant

& Sensitive Computer System(like Automation, SCADA)i.e. independent Earthing located

in other than normal soil i.e. Soft Rock, Marshy Soil etc.. Ea. 2 10489

-Length of Pipe : 3 Mtrs.

-Back filling Compound :2 nos Bags of 25 Kg.

Providing and fixing approved make Perforated C type cable tray. Made from sheet steel. The cable

tray should be single or double bended as per required and as per IS 2062/1079 and shall be coated

32 .4-11-1 with hot dip galvanizing as per IS 2629/4759. with max 17.5% perforation with coupler plate / Fish

plate and GI hardware like nut - bolt and washers etc. erection with necessary support( included) as

per Specification and as per instruction of engineer in charge..

(4) 200 X 50 X 1.6 mm Thick Rmt. 130 492

Providing & laying approved make ISI marked Rigid PVC pipe having 6Kg / cm2 (Class-3) to be

33 4-5-9. erected at road crossing on or floor as directed for laying of cable. The pipes as following size of dia

& weight per 6 mtr.

(A) 40 mm inner Dia. (1.68 Kg / 6 RMT) Mtr 30 52

34 MR Movement sensor switch adjustable 0.5 to 1.5 minute time seating tupy Ea. 30 1100

35 MR PVC coated copper flexable type 8 guage thick earthing wire Rmt. 80 32

36 MR Bell system

1 Anchor make surface 8 Module box Ea. 6 130

2 Anchor roma make 10A Bell Switch Ea. 24 98

3 Anchor roma make Bell indicator Ea. 24 1529

4 Anchor roma make Plate 8 Module Ea. 6 125

5 0.75 sq.mm. 1 Phase 2 wire wiringmains with PVC pipe and acceorises complate with fitting labour Mtr 900 87

ESTIMATE FOR PGVCL CORPORATE OFFICE PHASE -1 - Conference Hall

Point wiring for Tissino / Modular secondary light point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires, in below

1-2-1 1-1- type of pipe to be erected complete with earth continuity and necessary connection with primary

4. light with accessories erected on Metal / PVC / wooden box covered with 3 mm thick

PC(Polycarbonate) / Acrylic sheet for open / concealed wiring. with necessary Lamp holder / ceiling

rose / H.D.Connector as directed.

Note:- Maximum up to 6 mtrs length, excess will be considered as Mains for Secondary Point.

(a+a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling complete

1 SWITCH - 5 LIGHT Cat. III Pt. 1 1088

Point wiring for Tissino / Modular secondary light point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires, in below

1-2-1 1-1- type of pipe to be erected complete with earth continuity and necessary connection with primary

4. light with accessories erected on Metal / PVC / wooden box covered with 3 mm thick

PC(Polycarbonate) / Acrylic sheet for open / concealed wiring. with necessary Lamp holder / ceiling

rose / H.D.Connector as directed.

Note:- Maximum up to 6 mtrs length, excess will be considered as Mains for Secondary Point.

(a+a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling complete

1 SWITCH - 6 LIGHT Cat. III Pt. 4 1259

Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC /

3 1-2-4. Metallic/Wooden box, single mounting base frame covered with textured / metallic/white front plate

modules erected on / in wall / ceiling with following type accessories

Cat. III Pt. 12 255

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in below type of pipe

4 1-2-3. erected complete with Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden box

covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with

following type of accessories.

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb db board

(a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling complete

Cat. III Pt. 8 471

5 MR [II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db board.

(a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling complete

Cat. III Pt. 10 220

Supplying & erecting Sheet Steel powder coated Cable end termination Box to be mounted on Top

6 3-11-6. or Bottom of the MCB Distribution Box for housing/covering Extra wires & Cables, suitable for

following size of MCB DB Box.

ESTIMATE FOR PGVCL CORPORATE OFFICE PHASE -1

No SORNo Description Unit. Qty Amount

(H) Three Phase 12 Way Er. 1 789

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with

sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of

(A) With medium class Rigid PVC pipe and accessories

(d) 3 wire 2.5 sq. mm Mtr 100 101

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper

8 1-4-2. conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size

(A) (A) with medium class Rigid PVC pipe and accessories

(d) 3 wire 4 sq. mm Mtr 100 141

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on

single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to

IS: 513/CRCA/aluminium pressure die cast powder coated and high U.V. & corrosion resistance

with diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity between

the ranges shown.)

(A) Square/ Circular shaped Surface/Recessed Mount Downlight with provision for spring loaded

mounting clips complete.IP20

(iii) 16 watts, Surge-2 KV

Cat. III Ea. 25 584

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on

single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to

IS: 513/CRCA/aluminium pressure die cast powder coated and high U.V. & corrosion resistance

with diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity between

the ranges shown.)

(B) LED Panel Light with provision for Plane front frame with translucent cover fixed to housing

(v) 24 watts, 12" x 12" , Surge-2 KV

Cat. III Ea. 17 1777

Supplying & erecting Sheet Steel powder coated Cable end termination Box to be mounted on Top

11 3-11-6. or Bottom of the MCB Distribution Box for housing/covering Extra wires & Cables, suitable for

following size of MCB DB Box.

(G) Three Phase 12 Way Ea. 1 683

Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve) having

KA breaking capacity & confirms to IS : 8828 in existing box having following capacity

(A) 6 to 32 Amp.

Cat. III Ea. 28 297

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA

breaking capacity & confirms to IS :8828 in existing box having following capacity

Cat. III Ea. 3 730

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking

capacity ICU of 25 KA. at 415 V,having normal current rating up to 25 A to 100A. with Fixed thermal

& magnetic release suitable to work on A.C. supply 50 c/s. with all internal connections, spreader

tinned copper & complete erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III Ea. 1 6112

Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper cable 1.1 KV grade to be erected

as directed of following size.

(L) 4 core 10 Sq. mm Mtr 40 568

Providing & erecting weather proof, dust & vermin proof, floor mounted front operated indoor type

cubical panel board necessary IP-42 and above protection as per approval from engineer incharge

made from 14 SWG thick CRC M.S. sheet for outer body & doors, 16 SWG thick CRC M.S.sheet for

internal partitions with necessary accesories , supporting angles/ flats channel including cutting,

bending, drilling, welding, riveting with internal partitions & cable alley as per requirements &

instruction of engineer-in-charge with erection of

supplied switch gears, BUSBARS, suitable size of inter connecting PVC copper wire / copper-

aluminium strips, rubber grommets, rib, bakelite control fuses/MCB for measuring instruments, earth

bus & earth bolts, foundation flange - bolts-base Plates, sufficient nos. of hinged doors, handles with

locking arrangement and rubber gasket,heavy duty end terminal connection,danger notice

board,necessary ventilation,earthing strip complete. The Panel shall be painted with epoxy powder

ESTIMATE FOR PGVCL CORPORATE OFFICE PHASE -1

No SORNo Description Unit. Qty Amount

(The rates excludes the cost of switchgears, bus bars, inter connecting mains & Copper Aluminium

strips, meters, Fuses etc. The dimension shall be measured excluding base beams) The panel shall

be supplied with following approved manufacturers with following size.

(A) locally fabricated panel board

(i) with 350 mm depth Sq.Mtr 1 10365

Supplying and erecting triple pole & neutral 440V/ 500V panel mounting Aluminium Busbars with four

equal Nos. of bus having current density not more than 0.8 Amp. / sq.mm (Rated current / cross

17 3-8-1. section area) duly wrapped with colour insulating tape for phase sequence of following current

carrying capacity, erected with necessary bus bar supports /insulators, main cable socket to each

busbar,erected in existing cubical panel with necessary connections.

(A) Suitable for 100 Amp. Capacity Rn.Mtr 1 654

18 MR Bell system

1 Anchor make surface 8 Module box Ea. 1 130

2 Anchor roma make 10A Bell Switch Ea. 7 98

3 Anchor roma make Bell indicator Ea. 7 1529

4 Anchor roma make Plate 8 Module Ea. 1 125

5 0.75 sq.mm. 1 Phase 2 wire wiringmains with PVC pipe and acceorises complate with fitting labour Mtr 200 87.05

ESTIMATE FOR PGVCL CORPORATE OFFICE PHASE -1 FOR ELV SYSTEMS

PVC PIPE LAYING AS PER DESIGN IN FLOOR ,WALL ,CEILING & CABLE TRAY FOR

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be

19 1-3-2. erected on/in wall or ceiling erected with necessary PVC fittings & Junction boxes fixed with

adhesive solution & Clamps with following dia of pipes, in approved manner as directed

Providing and fixing approved make Perforated C type cable tray. Made from sheet steel. The cable

tray should be single or double bended as per required and as per IS 2062/1079 and shall be coated

20 .4-11-1 with hot dip galvanizing as per IS 2629/4759. with max 17.5% perforation with coupler plate / Fish

plate and GI hardware like nut - bolt and washers etc. erection with necessary support( included) as

per Specification and as per instruction of engineer in charge..

(4) 200 X 50 X 1.6 mm Thick Rmt. 150 492

Supplying & erecting M.S. Box having 16 Gauge painted with red oxide or Heavy duty PVC box

21 1-5-1. erected flushed on wall or concealed in wall with necessary plastering & finishing as directed of

following size.

(b) 150 mm x 200 mm x 75 mm(d) (MARKET PRICE) Ea. 67 80

(d) 300 mm x 375 mm x 75 mm(d) (MARKET PRICE) Ea. 3 180

22 1-5-2. Providing & Erecting 3mm thick Polycarbonate (PC) sheet with grooving as directed

(a) 25 X 64 NOS. Sq. Inch 1600 3

(b) 40 X 78 NOS. Sq. Inch 3120 3

(c) 63 X 67 NOS. Sq. Inch 4221 3

(c) 99 X 2 NOS. Sq. Inch 198 3

(d) 208 X 3 NOS. Sq. Inch 624 3

Total Estimate1426081

Net Total Estimated cost

In Words : Rupees Sixteen lakh eighty two thousand seven hundred seventy five and fifty eight paisa Only