LAC-ADS-2024-25 Kalliasseri LAC Sri Vijin MLA SITC 2no.s High mast lights at Edatt college bus stop in Kunhimangalam Panchayath and Ezhilod in Cheruthazham Panchayath and 20no.s Minimast lights

90.15.1.2:Supply installation testing and commissioning of Octogaonal Pole made of hot dip galvanised GI sheet 70mm top diameter. 155 mm bottom diameter thickness 3mm base plate dimensions of 250x250x16 mm suitable for windspeed as per IS 875 Part III fixed head frame including round arm luminary carriage suitable to install 4/6 nos luminaries in symmetrical arrangement including connector foundation bolt 4 nos fixed in existing RCC foundation adn junction box etc, complet 9 Meters

OD349822/2025-2026:Supply installation testing and commissioning of High Mast using Octogaonal Pole made single/two sections of hot dip galvanised GI sheet 100mm top diameter, 360mm bottom diameter thickness 3mm mm suitable for wind speed as per IS 875 Part III with head frame assembly two point suspension system with steel wire rope 5mm dia double drum winching system trailing cable, connector, integral power tool motor, manual handle, junction box, and including round arm galvanized luminary carriage suitable to install 6/8 nos luminaries in symmetrical arrangement control gear box and lighting spikes with single phase operation power tool installed inside the base compartment including connectors 24mm diameter foundation bolts of 750mm bolt length, 385mm pitch circle diameter manufactured from special steel along with nuts, washers, anchor plate foundation bolt minimum 6 nos fixed in existing RCC foundation and junction box and supply and fixing control panel made of 2 mm CRCA sheet as per approved design and requirement, with front access facility, hinged doors, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, interconnection etc, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication for fixing Energy meters and all accessories ,heavy duty 'A' section neoprene gasket in the panel board A' section neoprene beeding suitable for 1.60/ 2.00 mm sheet and necessary 24 Hours Analog Timer for operating automatic ON-OFF function ,10/16A, 2Pole, AC 3 rated power contactors with 1NO+1NC auxiliary contacts & with AC coil for switchin lights, motor forward and reverse operations ,16/25A DP MCB ,25 A, 2 pole, 100 mA RCCB, Auto /Mannual switch, Push buttons, Indicators, DIn rails for mounting MCBs RCCB, 32A Bakelite HRC fuse, Nutral link,, MCBs all control wiring including necessary angle iron frame work for fixing the control pannel etc, complete 12 Meters

OD249245/2025-2026:Supply Conveyance, installation, testing and commissioning of 24000 lumen LED, efficacy >=120 Lm/watt, IP 66 flood light fitting with die-cast aluminium housing, polycarbonate cover complete with THD 0.95, RoHS compliant, duly wired up for use on 230 V AC supply, IK >=7, with internal surge protection 4k above. Chip make Cree/Osram/lumilled/Nichea/Bridgelux duly wired up for use on 230V AC supply.(LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)

OD249578/2025-2026:Supply Conveyance, installation, testing and commissioning of 12000 Lumen LED Flood light output greater than 120 lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)

14.1:Excavation for foundation in soft soil including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 metres.

14.7:Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc as required.

14.10:Providing and laying in position reinforced cement concrete 1 :2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc. including form work etc. as required (excluding reinforcement).

OD213411/2025-2026:Providing 15mm thick cement plaster of mix 1:4 (1 cement : 4 fine sand) at all levels.

OD213413/2025-2026:Reinforcement for R.C.C works, bend tied and placed in position (plain grill requiring bend cold) using tor steel as required.