Tender for work of Providing Double Coating 2mm thick XLPE inner side & 1.2 mm thick UV Coating outer side on 55 mm2 Conductor for all Sub-divisions under Dharampur Division.

Supply for labour charge for XLPE with UV coating on 55 SQ MM conductor (1.2 MM thick) including labour

charge for All Sub Division under Dharampur Division.

( A) CAPITAL WORK LABOUR RATES FOR FY 2024-25 (WITHOUT GST )

Sr No. Description UNIT Qty RATE TOTAL

Providing of Wooden Drum for insulated Nos.

1 Conductor ( Minimum 3Km Coated

Conductor Per Drum)

Providing of XLPE+ UV coating on 55 sq mm Mtr.

2 conductor (thickness 1.2 mm) including

TOTAL ESTIMATE-FIFTEEN LAKH Only

Note: - All Rates are excluding of GST.

Executive Engineer (O&M),

D.G.V.C.L., Dharampur Division.

1. DGVCL will provide key material like M.S. materials,ABC/Bare conductors,PSC/RSJ

Poles,Insulators,Fabricated materials etc. to the contractor.

2. All fabricated items shall be fabricated as per DGVCL approved drawing and by

welding rods confirming to the relevent ISI specification and as directed by Engineer

3. Necessary electricity connection for fabricated items shall be provided by DGVCL

on payment of required charge for connection & electricity bill of the same shall be

paid by the agency.

4. All the rates are inclusive of PF and Exclusive of GST applicable time to time.

5. All steel material are to be painted as below:

(a) Scrubbing of rusted surface properly before applying the paints on to the RSJ

poles & steel fabricated materials of RSJ/PSC poles is must require.

(b) Two coats of approved ISI mark red oxide (primer) is to be properly painted for

the RSJ poles & steel fabricated materials of RSJ/PSC poles.

(c) Two coats of approved ISI mark silver paint (i.e. triple mangoes or equivalent

quality silver paint) is to be properly painted on to the RSJ poles.