Electrification to the Renovation of the Panambur Railway Station Office

Labour charges for laying of 1.1 KV class XLPE LT UG Cable in existing trench / GI pipe / Stoneware pipe / on pole/on concrete wall as required. a) 4C x 16 Sq.mm

Supplying and making end termination with glands, lugs of LT cable. a) 4C X 16 Sq.mm

Supply and wiring for lighting/ power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694: confirming to latest amendments. a) 1.5 Sq.mm

Supply and wiring for lighting/ power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694: confirming to latest amendments. a) 2.5 Sq.mm

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone /C.C wall. a) 3 Way

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone /C.C wall. b) 8 Way

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone /C.C wall. c) 12 Way

Extra for Groove cutting in brick wall /CC floor to the suitable depth for concealing of Conduit /GI pipe and plastering, finishing up to wall surface complete. upto 50 mm conduit CC floor.

Supplying and fixing surface /flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C. Wall. Including necessary rawl plugs. Machine/NF screws etc. complete. a) 3 Way

Supplying and fixing surface /flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C. Wall. Including necessary rawl plugs. Machine/NF screws etc. complete. b) 4 Way

Supplying and fixing surface /flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C. Wall. Including necessary rawl plugs. Machine/NF screws etc. complete. c) 6 Way

Supplying and fixing surface /flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C. Wall. Including necessary rawl plugs. Machine/NF screws etc. complete. d) 8 Way

Supplying and fixing surface /flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C. Wall. Including necessary rawl plugs. Machine/NF screws etc. complete. e) 12 Way

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC Box. a) 3 Module

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC Box. b) 4 Module

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC Box. c) 6 Module

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC Box. d) 8 Module

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC Box. e) 12 Module

Supplying and fixing of modular switch and connected accessories on existing modular switch plates as per IS 3854 and IS 1293. a) 6A Switch

Supplying and fixing of modular switch and connected accessories on existing modular switch plates as per IS 3854 and IS 1293. b) 6A 3Way Socket

Supplying and fixing of modular switch and connected accessories on existing modular switch plates as per IS 3854 and IS 1293. c) 16A Switch

Supplying and fixing of modular switch and connected accessories on existing modular switch plates as per IS 3854 and IS 1293. d) 6/16A 3 Way Universal Socket

Supplying and fixing of modular switch and connected accessories on existing modular switch plates as per IS 3854 and IS 1293. e) Stepped Fan Regulator (2 module)

Supplying of Ceiling Fan with Capacitor rating as per guideline of BEE 5 star rating and IS:374/19 and also comply with IS: 1709/1984 with latest amendment, Rated voltage 220 V/50 Hz, Rated power upto 35 W +/- 10 %, Rated current as per IS:374/19, Rated power factor 0.9 lagging(min), Rated speed 350 +/- 10% RPM, Rated air delivery 210 +/- 10% Cubic Meter Minimum, Rated service value 6.2 CMM / W, Three Blades of blade leaf 1.05 mm thick Aluminium Alloy sheet, Class B motor insulation, Bearing Two ball bearings, Top 6202, Bottom 6201, as per IS specification, Motor winding. Temp rise Shall not exceed 75 degC over and ambient of 40 0C by resistance method at 245 V, Insulation resistance Shall not be less than Two Mega Ohms (2M Ohms), Leakage current Should not exceed 210 Micro Amp, Power input, W& current, Air Delivery & Fan Speed as per IS:374/2019 with latest amendment, 2 year manufacturer Warranty. (BLDC fans). a) 48” Sweep (1200mm) Regular model.

Fixing 48” Sweep (1200mm) Regular model Ceiling Fan (BLDC) of all capacities and all types to the existing ‘S’ hook with fan regulator to the existing board together with supplying and fixing 5A ceiling rose, with necessary length of 23/.00076 inch PVC insulated twin twisted copper wire and wiring.

Supplying of exhaust fan of 1440 RPM of 300 mm (12” sweep) size with bracket blades complete for light duty suitable to operate on 230V, 50Hz, AC Supply.

Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5A ceiling rose with sufficient length of 23/.00076 inch PVC insulated twin core wire.

Supplying wall mounting fan suitable to operate at single-phase 230v AC. supply. 300mm Sweep.

Fixing wall mounting fan of all capacities and all types, with necessary clamps with 5A. ceiling rose of approved quality with necessary length of 23/0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired.

Supplying of 3KW, 230V, 1 Ltr instantaneous Geyser

Erection charges for fixing of 1 ltr capacity wall mounted electric geysers using bolts, flat at one end nut and washers with 150x450x600mm back plate and wiring complete with 15A 3 pin top.

Supplying heavy gauge PVC Conduit Pipe confirming to IS 2509 with suitable size bends, metal junction boxes adhesive paste etc. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC and enclosures. 25mm dia 2mm thick.

Supply of 1/4 feet PVC Batten with integrated LED tube with high quality diffuser with life of 25000 burning hours & 70% lumen maintenance with CRI>80.Power input: 220-240V @50/60hz & Power factor >0.9 along with CE approved. 2 years warranty against any manufacturing defect working under standard electrical condition. a) LED light fitting 1 x 4 feet-20/ 22 W.

Supply of 1/4 feet PVC Batten with integrated LED tube with high quality diffuser with life of 25000 burning hours & 70% lumen maintenance with CRI>80.Power input: 220-240V @50/60hz & Power factor >0.9 along with CE approved. 2 years warranty against any manufacturing defect working under standard electrical condition. b) LED light fitting 1 x 1 feet -9/ 10 W.

Fixing all types and all capacities of fluorescent/false ceiling LED fittings indoor on the wall/ceiling using 23/0.0076” twin twisted PVC insulated wires, using ceiling rose, required nos of round blocks and clamps. a) On wall/Ceiling.

Supply and fixing of LED Street light luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti-glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 5000 hr @ Lumen Maintenance of 70%, maximum light intensity shold be between 60 degree to 70 degrees. CCT > 5500K, IP66 optical and electrical compartment & impact resistance of complete liminaire > IK08. Power factor > 0.9 with mains, Surge Protection - Min 5 KV along with Over voltage/Overload, short circuit/miss-wiring protection. Compatible for pole mounting with outer dia of 40 mm to 50 mm. Universal volatge driver to operate wide voltage range from 100V to 270V 50/6t0 HZ application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the site location with minimized minimal tools. LED Light fixture with 25 W diated system power consumption. LED Efficiency>1301m/w, nominal CRI > 75. luminiare manufacturer should have in-house facility accredited by NABL/CPRI & any government certified agency & Design & Develpopment facility certified by ISO 9001:20008. Housing with supplier word mark / name shall be Engraved / Embossing on the die cast housing / Body part. Warranty of 2 years against any manufacturing defect under standard electrical conditions as mentioned should be given by manufacturer. a) LED Street light 25W

Supply and fixing of Hot dip Galvanized M.S. Bracket suitable for outdoor luminaries and mounted on octagonal pole using necessary bolts, nuts etc. Complete. Single arm bracket with 1000mm standard 40/50mm dia.

Supply and fixing of Metal Socket set of 2 pole and earth plugs and socket for incorporating SP / TP MCB (without MCB). The entire plug and socket shall be mounted in a thermoplastic/ powder coated metal box & wired completely. a) 20 Amps- SP & N.

Supplying and fixing of DP 2 Way enclosure box flush mounting with provision for fixing suitable type capacity MCB’s DP with powder coated painting.

Supply and fixing of regular MCB distribution board on wall/wood board/flush mounting using required clamps, bolts, nuts etc. with

provision for fixing suitable type capacity MCB’s Single/Three phase double door with powder coated painting. Made out of 14 SWG MS enclosure. a) Double Door 12 way TP & N.

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and “C” type curve, indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. a) 40A TPN

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and “C” type curve, indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. b) 20A SP

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and “C” type curve, indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. c) 10A SP