Malappuram Package No.4 - Supply and Construction of 11 kV Lines using HT ABC,along with Installation of Transformers for Development of Distribution Infrastructure on a Turnkey Basis under Dyuthi Special Scheme at Various Locations under EC, Manjeri

Distribution Transformer 3 Phase 160 kVA 11kV/433 V ONAN (1 Star Rated)

Aerial Bunched Cable HT 3x150 + 1x120 sq.mm (Insulated Messenger)

Pole PSC 9 M

Anchoring /Dead end Clamp Assembly for HT AB Cables up to 150 sq.mm (Insulated messanger 95 to 120 sq mm)

Suspension Clamp Assembly for HT AB Cables up to 150 sq.mm

Stainless Steel Strap [20 mm x 0.7 mm]

Stainless Steel Buckle Slot width 20.5 mm x 1.5 mm,Thickness 1.2 mm.

MVT Kit for HT ABC (3 Nos)

Heat Shrinkable Termination Kit (3 Nos) for 120 Sq.mm Three phase HT Aerial Bunched Cable

Channel cross arm GI 100 x 50 x 6 mm - 3 mt

Channel cross arm -75x40x6mm 1.8M

Drop Out Fuse 11kV 200A (Polymeric)

Cable 1.1kV XLPE AL 1c x150 sq mm (Un Armoured)

Distribution Box LT Outdoor 3 Way 200 A

Air Break Switch (AB Switch) 11kV 400 A , Composite Polymer Housing

CROSS ARM GI CHANNEL 4 LINE (4 Line Channel Cross Arm) with Clamp, Bolt & Nut for PSC Pole 8M/200kg

CROSS ARM GI CHANNEL 2 LINE (2 Line Channel Cross Arm) with Clamp, Bolt & Nut for PSC Pole 8M/200kg

GI Wire 8 SWG

Bolt&Nut GI with washers of various sizes

SHACKLE INSULATOR 415V SET(WITH STRAP BOLT&NUT)

Composite polymeric pin insulator with pin 1.1 kV

Earthing Coil GI 115 Turns 50 mm internal Dia dia

Ferrules 5 Sq.mm(GI)

Stainless Steel Buckle Slot width 10.5 mm x 1.5 mm,Thickness 1.2 mm.

Pipe GI 40 mm dia -2.5 m Length( Earth Pipe)

Earth Chamber (PVC) With RCC Covering Slab

Crimping Socket Palm Type 50 Sq.mm -Al(Cable Lug)

Stay Insulator Porcelain 11k V

Anchor Plate 200 x 200 x 8 mm GI (HT Stay Plate GI))

Turn Buckle ,Eye bolt with 2 Nuts 20 mm dia -GI(Stay tightner HT)

Stay Wire 7/8 (7/3.15mm) GI (HT Stay Wire)

Stay Rod (Anchor Rod) GI 20 mm dia (HT Stay Rod)

Helically formed Guy-Grip HT

Thimble GI 75 mm x 22 mm x 40 mm ,1.5 mm Thickness (For HT and LT)

Clamp GI For HT Stay/Strut

Cable Tray GI (Perforated) 300 x 30 x 1.6mm-2.5 mt

Clamp GI for Cable Tray in Transformer DP

Crimping Socket Palm Type 150 Sq.mm -Al (Cable Lug)

Cable Tie UV Plastic Heavy Duty 250 mm Length

Lightning Arrester 9 kV,10 KA (Distribution class) Composite Polymer Housing

Clamp for HT Cross arm

Distribution Transformer 11kV/ 433 V 100 kVA 3 phase ONAN

Pole A Type GI 11 M

FUSE UNIT 415 V 200A PORCELAIN

Crimping Socket Palm Type 120 Sq.mm -Al (Cable Lug)

Cable 1.1kV XLPE AL 1c X 120 sq mm (Un Armoured)

Aerial Bunched Cable HT 3x120 + 1x95 sq.mm (Insulated Messenger)

Spacer LT 4 line Composit (For Cable Tray)

Stainless Steel Strap 10 mm x 0.7 mm-For clamping earth wire

Channel cross arm GI 100 x 50 x 6 mm 2.4 mt

Heat Shrinkable Termination Kit (3 Nos) for 150 Sq.mm Three phase HT Aerial Bunched Cable

Distribution Transformer 11kV/433 V 250 kVA 3 phase ONAN

Pole A Type GI 12 M

Item Wise BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Fitting and erecting one HT PSC Pole in position incl. fitting cross arm, digging & back filling pit, drawing earth leads.

Fitting and erecting one HT DP using PSC pole in position incl. fitting 2 channel cross arms, digging & back filling pit, drawing earth leads.

Fitting 6 channel cross arms, AB switch, DO fuse, LA, HT & LT connections on existing DP, 3 LT fuses.

Fitting and providing one HT Stay for 11kV pole incl. digging & back filling pit.

Stringing of 11 kV Aerial bunched cable of size 3 x 150 + 1 x 120 sqmm with bare/insulated Messenger through existing poles

Doing one cable end termination on HT ABC of sizes Up to 3x150+1x120 sqmm

Erection of Anchor clamp / dead end clamp for 11kV ABC of any size

Erection of suspension clamp for 11KV ABC of any size

Fitting one set (3No.) 11kV LA and giving connections excluding earthing.

Providing one Earth using earth pipe incl. digging & backfilling pit and supply of charcoal, salt, sand etc.

Dismantling (without damage) one LT PSC/RCC pole after disconnecting stays, strut etc. and stacking the same.

Dismantling one damaged LT PSC/RCC pole after disconnecting stays, strut etc. and stacking the same.

Drilling hole of various sizes on existing Channel/Cross Arm.

Fitting one Additional 75x40mm, 1.8m Channel cross arm in existing single pole incl. conveyance of materials.

Transferring LT 3ph 4/5 wire OH line to newly erected HT/LT pole and refitting all items to the new pole.

Fitting one LT 4 line cross arm on HT or LT existing poles incl. fitting insulators and binding the same with LT Line.

Fitting one LT 2 line cross arm on HT or LT existing poles incl. fitting insulators and binding the same with LT Line.

Dismantling and reconnecting Sph service connection from the OH line incl. lowering down the WP portion.

Dismantling and reconnecting 3ph service connection from the OH line incl. lowering down the WP portion.

Dismantling one ordinary street light/CFL/LED fitting from existing pole and refitting the same on newly erected pole and reconnecting.

Dismantling (without damage) LT stay incl. digging pit in all classes of soil and backfilling

Providing Transformer fencing , using 50x50x6mm Angle iron, 40 x 6 mm MS flat and 8 mm MS rod as specified, incl cost of transportation & foundation

Providing yard metalling with 6mm & 40mm thick blue metal as specified after constructing a curb wall.

Erection of LT 3 way distribution box on existing cross arm giving connection incl. cable and earth connection (excluding earthing).

Additional rate for excavation of one Pit for HT Pole/HT Stay in Laterite.

Additional rate for excavation of one Pit for HT Pole/HT Stay in Hard Laterite.

Additional rate for excavation of one Pit for HT Pole/HT Stay in Soft Rock.

Additional rate for excavation of one Pit for HT Pole/HT Stay in Rock.

Additional rate for excavation of one Earth Pit (2.5m depth) in Laterite.

Additional rate for excavation of one Earth Pit (2.5m depth) in Hard Laterite.

Additional rate for excavation of one Earth Pit (2.5m depth) in Soft Rock.

Pillar foundation for Transformers below 250 kVA (Single pillar)

Erecting one 160kVA Transformer to existing Plinth/Platform and giving connections, incl. loading & unloading, excluding transportation.

Erecting one 100kVA Transformer to existing DP and giving connections, incl. loading & unloading, excluding transportation.

Providing concrete muffing (0.45x0.45x1.5m) inclusive of cost of all material (as per specification).

Fitting and providing one HT Fly stay for 11kV pole using HT PSC pole incl. digging & back filling pits.

Additional rate for refitting/redoing one Shackle set and reshackling one span while renewing any type of pole.

Fitting and erecting one HT DP using A type pole in position incl. fitting 2 channel cross arms, digging & back filling pit, drawing earth leads.

Fitting one additional Fuse unit and giving connection from Transformer to fuse and DB to LT OH line.

Fitting and erecting one HT A type Pole in position incl. fitting cross arm, digging & back filling pit, drawing earth leads.

Additional rate for excavation of Pit for A type pole in Hard Laterite.

Stringing of 11 kV Aerial bunched cable of size 3 x 120 + 1 x 95 sqmm with bare/insulated Messenger through existing poles

Providing Cable Tie

Fitting and providing one Strut using HT PSC pole incl. digging & back filling pit.

Fitting one Additional 2.4m/3m Channel cross arm (100x50x6mm), in existing 11kV DP incl. conveyance of materials.

Providing one Coil Earth using GI earth wire, digging separate pit at standard distance away from the pole/structure & backfilling.

Fiting One no MVT on existing cross arm excluding termination work (for One phase) of any rating for 11 kV AB Cable

Pole numbering using printed Aluminium sheets / Painting the surface of pole with anti algal yellow paint and painting Letters with black paint as specified incl. cost of paint.

Traffic signal painting of pole 1.5m height using black and white paints in alternate rings of 25cm width incl. cost of paint as specified.

Transferring LT Sph 2/3 wire OH line to newly erected HT/LT pole and refitting all items to the new pole.

Dismantling (without damage) one LT PSC/RCC Strut pole incl. removal of clamps and stacking.

Additional rate for excavation of Pit for A type pole in Soft Rock.

Fitting one set AB switch and giving connection

Constructing Transformer plinth inclusive of cost of all materials (as per specification).

Additional rate for excavation of Pit for A type pole in Rock.

Erecting one 100kVA Transformer to existing Plinth/Platform and giving connections, incl. loading & unloading, excluding transportation.

Erecting one 250kVA Transformer to existing Plinth/Platform and giving connections, incl. loading & unloading, excluding transportation.

Additional rate for excavation of Pit for A type pole in Laterite.

Fitting 5 channel cross arms, AB switch, DO fuse, LA, HT & LT connections on existing DP, 3 LT fuses.

Fitting one Additional 2.4m/3m Channel cross arm (75x40x6mm), in existing 11kV DP incl. conveyance of materials.

Dismantling of suspension clamp suitable for LT AB cable

Dismantling of Anchor clamp / dead end clamp for LT AB cable

Erection of Anchor clamp / dead end clamp for LT ABC of any size

Erection of suspension clamp for LT ABC of any size

Fitting and providing one Strut using A type pole incl. digging & back filling pit.

Dismantling (without damage) one 11kV PSC/RCC pole after disconnecting stays, strut etc. and stacking the same.

Dismantling one damaged 11kV PSC/RCC pole after disconnecting stays, strut etc. and stacking the same.

Fitting and providing one HT Fly stay for 11kV pole using A type pole incl. digging & back filling pits.

Additional rate for providing one disc set on any type of HT pole for making cut point.

Installing one DTR Meter with box on existing poles and giving the complete connections incl. conveyance of materials.

Fiting One no MVT on existing cross arm including 2 nos end termination (for One phase) of any rating for 11 kV AB Cable

Insertion of one HT PSC pole in existing HT/LT line incl. digging & back filling pit, fitting cross arm, insulator, binding etc.

Insertion of one HT A type pole in existing line incl. digging & backfilling pit, fitting cross arm, insulators, binding etc.

Providing one Earth using earth pipe incl. digging separate pit at standard distance away from the pole/structure & backfilling.

Fitting one Additional V cross arm in existing single pole incl. conveyance of materials.

Dismantling (without damage) one km LT 3ph 4 wire OH line, cross arms, insulators and stacking the conductors in rolls.

Additional rate for reinstalling LT line on the renewed 11kV pole having both HT and LT (HT/LT) lines.

Renewal of existing damaged/old 11kV PSC/RCC Pole with new A type pole in place and refitting of all items incl. conveyance (except pole).

Stringing of 1.1 kV Aerial bunched cable of size 3 x 70 + 1 x 16+1x 50 sqmm with bare/insulated Messenger through existing poles

Stringing of 1.1 kV Aerial bunched cable of size 1 x 25 + 1 x 25 sqmm with bare/insulated Messenger through existing poles

Dismantling of 1.1 kV Aerial bunched cable of size 3 x 70 + 1 x 16 (Street Light) + 1 x 50 Sq.mm. (Insulated Messenger)

Dismantling of 1.1 kV Aerial bunched cable of size 1 x 25+ 1 x 25 sqmm with bare/insulated Messenger from existing poles

Erecting one 160kVA Transformer to existing DP and giving connections, incl. loading & unloading, excluding transportation.

Providing Strut using LT PSC pole incl. digging & back filling pit.

Fabricating Mini lattice structure using 2 Nos. of A poles

Providing Stay for LT poles incl. digging & back filling pit.

Erecting one LT PSC Pole in position incl. digging & back filling pit.

Reshackling one span LT Sph 2 wire OH line, replacing insulators, tightening stay, cutting tree branches incl. conveyance.

Reshackling one span LT 3ph 4 wire OH line, replacing insulators, tightening stay, cutting tree branches incl. conveyance.

Fitting one No. Section fuse on LT line with dropping cables, crimping sockets, connecting with bolt&nut etc.

Dismantling (without damage) one HT PSC/RCC Strut pole incl. removal of clamps and stacking.

Renewal of existing damaged/broken old LT stay with existing stay rod.

Item Rate BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

TOTAL BOQ1 (Materials( Total Ex-work price of Materials + Total Transportation cost ) excluding GST.)

TOTAL BOQ2 (Installation / Erection Charges (Excluding GST)

TOTAL AMOUNT [1+2] (Excluding GST)

Discount offerred by Bidder(If any)

BOQ 3: TOTAL excluding GST [3 - 4]

Grand Total including GST (5+ GST Amount of BOQ1+GST Amount of BOQ2 )

Please Enable Macros to View BoQ information