Co Directorate of Police Communication and Technical Services Training Centre at Maandal Bhangrotu Tehsil Balh Distt Mandi HP SH Co Hostel for female trainees including internal external WS SI Co 100 users septic tank and 1No soak pit Co 10000 litre

Amount

Cutting in earth work through mechanical means in all heights/depths and in all kinds of soil such as kankar, moorum, shingal and decomposed or soft rock, hard rock i.e. their intermediate classification and chiselling/wedging out rock where blasting prohibited including saturated soils and filling in embankments etc. where necessary and disposal of all excavated unserviceable material in all leads and lifts including through mechanical transportation, the disposal of the unserviceable material will be done on approved dumping site. Any damage to private/public property during execution will be restored by the contractor whatsoever the nature of the same may be. The serviceable material will be stacked in specified dimensions in all leads and lifts as per the direction of the Engineer-in-charge.

Excavation in earth work in all kinds of soils such as pick work, jumper work, blasting work and chiselling/wedging out of hard or soft rock and disposal of all excavated earth up to any leads and lifts disposed earth to be levelled and neatly dressed as directed by the Engineer-in-charge.

Excavation in foundations, trenches etc. in all kinds of soils such as pick work, jumper work, and chiselling/wedging out of hard or soft rock up to all heights stacking the excavated soil not more than 3 meters clear from the edge of excavation and then returning the stacked soil in 15 cms. layers, when required into plinths, sides of foundations etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed by the Engineer-in-charge in all leads and lifts.

Excavation in drains and channels etc. in earth work in all kinds of soil such as pick work, jumper work, blasting work and chiseling/wedging out of hard or soft rock up to all heights including dressing of sides and bed and disposing of excavated earth up to all leads and lifts and disposed earth to be levelled and neatly dressed including carriage of material in all leads and lifts.

Filling in plinth with sand under floors including watering ramming, consolidating and dressing complete including carriage of material in all leads and lifts.

Providing form work with steel plates 3.15mm thick welded with angle iron frames 30x30x5mm so as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden battens and ballies heights of propping and centering below supporting floor to ceiling in all heights and removal of the same for in-situ reinforced concrete and plain concrete work including carriage of materials in all leads and lifts.

Foundations, footings, bases of columns and the like mass concrete.

Flat surfaces such as soffits of suspended floors, roofs, landings and the like floors etc. up to 200 mm in thickness.

Vertical surfaces such as walls (any thickness) partitions and the like including attaached pillasters buttresses, plinth and string courses and the like.

Columns, pillars, posts and struts, square rectangular or polygonal in plan.

Stair cases with sloping or stepped soffits excluding landing.

Beams, cantilever, girders and lintels. Sides and soffits of beam, beam haunchings cantilevers, bressumers and lintels not exceeding 1 mtr in depth in all heights from floor.

Edges of slabs and breaks in floors and walls:- Under 20 cm; wide.

Providing and laying cement concrete 1:4:8(1cement: 4sand:8graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth including carriage of material in all leads and lifts.

Providing and laying cement concrete 1:6:12 (1cement: 6sand: 12 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of centering and shuttering in foundation and plinth including carriage of material in all leads and lifts.

Providing and laying cement concrete 1:8:16(1cement: 8sand:16graded stone aggregate 20mm nominal size ) and curing complete on slab and floor excluding the cost of form work screed laid under flooring including carriage of material in all leads and lifts.

Providing and laying upto floor all level cement concrete 1:2:4 (1cement: 2 Sand : 4 graded stone aggregate 20mm nominal size) and curing complete including form work including carriage of material in all leads and lifts in:- Kerbs,Steps and the like.

Providing and laying cement concrete 1:5:10 with 15% plums and curing complete including the cost of form work for plain/reinforced concrete in retaining walls, breast walls, the size of plum should be 150 to 300mm as per drawing and HP. PWD technical specifications including carriage of material in all leads and lifts.

Providing weep holes in brick masonry/stone masony/plain reinforced concrete abutment, wing wall, return wall with 100mm dia PVC pipe extending through the full width of structures with slope of 1 (V) : 20 (H) towards drawing face complete as per drawing and technical specification including carriage of material in all leads and lifts.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - 1:1.5:3 (1 cement: 1.5 Coarse Sand): 3 graded stone aggregate 20 mm nominal size) having strength of M-20 including carriage of material in all leads and lifts.

All work up to plinth level.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size). having strength of M-20 including carriage of material in all leads and lifts.

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size) having strength of M-20 including carriage of material in all leads and lifts.

Providing and laying mechanically mixed vibrated reinforced concrete of mixed design to have characteristic strength of M-20 GRADE for reinforced concrete chajjas not exceeding 10 cm thickness upto all heights including finishing the exposed surface with cement mortar 1:3 (1cement:3sand) to give a smooth and even surface, centering/ form work and curing complete excluding cost of reinforcement including carriage of material in all leads and lifts.

Providing and laying upto all floor level reinforced cement concrete 1:2:4 (1 cement : 2 Sand : 4 graded stone aggregate 20mm nominal size) to give a smooth and even surface including centring and shuttering etc. but excluding cost of reinforcement including carriage of material in all leads and lifts. in : Mouldings as in cornices windows sills etc. exceeding 15cm in girth

Providing tor steel reinforcement for RCC work including bending, binding and placing in position complete including cost of binding wire up to all heights including carriage of material in all leads and lifts.

Applying cement slurry on R.C.C. slab or cement concrete work using 2.75 kg of cement per sq. metre of floor area before laying cement concrete flooring including roughening, cleaning of the concrete surface complete including carriage of material in all leds and lifts.

Providing throating or plaster drip and moulding to R.C.C. chajjas including carriage of material in all leads and lifts.

Brick work using 2nd class common burnt clay building bricks in foundation and plinth including carriage of material in all leads and lifts. In cement mortar 1:6(1cement:6sand).

Brick work using 2nd class common burnt clay building bricks in superstructure above plinth level up to all heights, in cement mortar 1:6(1cement:6sand), including carriage of material in all leads and lifts.

Half brick masonry using 2nd class common burnt clay building bricks in foundation and plinth in cement mortar 1:4(1cement:4sand) including carriage of material in all leads and lifts.

Half brick masonry using 2nd class common burnt clay building bricks in superstructure above plinth level up to all floor level in cement mortar 1:4(1cement:4sand) including carriage of material in all leads and lifts.

Random rubble masonry/polygonal rubble masonry (un-coursed/brought to course) with hard stone of approved quality in foundation and plinth including levelling up with cement concrete 1:6:12(1cement:6sand:12 graded stone aggregate 20 mm nominal size) at plinth level in cement mortar 1:6(1cement:6sand) including carriage of material in all leads and lifts.

Boulder filling dry hand packed in plinth under floor etc. including carriage of material in all leads and lifts.

Stone filling behind retaining walls including carriage of material in all leads and lifts.

Providing and fixing door frame of NCL SECOOLAR abr carried from all formed section made of galvanised steel power coated (basic steel as per IS 513D) quality galvanised as per 277 with zinc of 120 gms/sqm powder coated with pure polyster power upto 50-60 with microns thick the overall size should be 150 mm x 60 mm for double rebate including fixing in position as per the dirction of Engineer in Charge including carriage of material in all leads and lifts.

Providing and fixing door frame of NCL SECOOLAR abr carried from all formed section made of galvanised steel power coated (basic steel as per IS 513D) quality galvanised as per 277 with zinc of 120 gms/sqm powder coated with pure polyster power upto 50-60 with microns thick the overall size should be 150 mm x 60 mm for single rebate including fixing in position as per the dirction of Engineer in Charge including carriage of material in all leads and lifts.

Providing and fixing Ivory coast teak wood 40mm thick panelled door shutters having styles and top rail 100mm width and bottom rail 200mm width lock rail 150mm width with panel insert of 12mm thick commercial veneered flat pressed ply wood Board of BWP grade confirming to IS. 303-1975 and bonded with BWP type synthetic resin confirming to I.S. 848-1974 including providing and fixing chamferred beading of size 38x20mm along the panels on both faces of shutters and providing wooden cleats and ISI marked black enamelled M. S. butt hinges with necessary screws all complete as per drawing and specification and instruction of Engineer-in-Charge including carriage of material in all leads and lifts.

Providing and fixing steel glazed door window and ventilated of ECO 4000 series of NCL SECOOLOR colour coeted standard rolled sections size cuter frame 72x 55mm thick mullion 72x 50x 0.58 style frame 46x 20mmx 0.58mm thick section for glass bead sholud be of 12mmx 12mm x o.58mm thick section for mesh 40x 20x 58mm fixing should be 18mm x 0.6mm x .58mm thickness. the sectionof sash panel openable shutter shall be 55mm x20mm x 0.58mm(107) each glazed shutter should be provide with one set of SSP/VOT hinges make handle with receiver glazed shutter and fixed glass portion should be provided with 4mm thick glass window should be provided with grill made of 10mm MS square bar welded to 6mm x12mm ITS Flat Distance Between Bars should not be more 150mm centre to centre total grill unit should be fixed to window frame with screws and embeded in cement concrete block 15cm x 10cm x 10cm size of1:3:6 (1 cement: 3 sand:6 aggregate 20mm nominal size wooden plugs screws or plugs and fixing clips with bolts and nuts as required and non filling including fixing of glass with gaskit clips as per architectural specification and as per the direction of Engineer-In- Charge including carriage of material with in all leads & lifts.

Providing and fixing 40mm thick Ivory coast teak wood wire gauge shutters using M.S. wire gauge of IS gauge designation 85 G with wire of dia 0.56 mm for doors, windows and clerestorey window and providing and fixing chamferred edged beading of 20x12mm including bright finished black enamelled iron butt hinges with necessary screws complete as per drawing and specification and instruction of Engineer-in-Charge including carriage of material in all leads and lifts.

Providing and fixing M.S. grills of required patterns in wooden frames of windows etc. with M.S. Flats, square or round bars with round headed bolts and nuts or by screws including carriage of material in all leads and lifts.

Providing and fixing 19mm thick Commercial Board water proof shutters for cup boards i/c fixing with nickel plated piano hinges with screws etc complete)including carriage of material in all leads and lifts.

Providing and fixing 19mm thick water proof commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc completeincluding carriage of material in all leads and lifts.

Providing and fixing 1.00mm thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etc complete.including carriage of material in all leads and lifts.

Providing and fixing 4mm thick water proof kit ply of standard quality ISI mark and approved shade and colour in wall linning including mitering at junction, butt jointing and nails complete (frame work for base to be measured and paid for separately) including carriage of material in all leads and lifts .

Providing and fixing 65x35mm.special quality bright finished brass cup board locks or wardrobe locks with six levers including necessary screws etc. complete. (Indian make of approved quality.including carriage of material in all leads and lifts.

Fixing oxidized aluminium sliding door bolts with nuts and screws etc. complete including carriage of material in all leads and lifts.

Fixing oxidised aluminium tower bolts (barrel type) with necessary screws etc. complete including carriage of material in all leads and lifts.

Fixing oxidized aluminium handles with the necessary screws etc. complete.including carriage of material in all leads and lifts.

Fixing oxidized M.S. hooks and eyes.including carriage of material in all leads and lifts. 150mm.

Fixing 100mm bright finished brass floor door stopper with rubber cushion screws etc. to suit shutter thickness complete,including carriage of material in all leads and lifts.

Cement concrete flooring 1:2:4(1cement:2sand:4graded stone aggregate 20mm nominal size) laid in one layer finished with a floating coat of neat cement including carriage of material in all leads and lifts:-

40 mm thick.

50 mm thick.

Providing and laying Duro stone vetrified tiles any size /coloured or of approved shade in flooring, treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1 cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete .including carriage of material in all leads and lifts.

Providing and fixing 10mm thick anti skid water proof stain and impect resistent heavy duty vetrified tiles manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete. including carriage of material in all leads and lifts.

Providing and laying Duro stone vetrified tiles any size/coloured of required shade in skirting risers of steps and dados on12mm thick cement mortar 1:3 (1cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete including carriage of material in all leads and lifts.

Digital tiles in skirting risers of steps and dado 12 mm thick cement mortar 1:3 (1 cement :3 sand) and jointed with cement slurry including carriage of material in all leads and lifts.

Providing and laying granite stone in flooring 20mm (average) thickness basae of cement mortar 1:3(1 cement:3 Sand ) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rubbing and polishing complete;-20mm thick. including carriage of material in all leads and lifts.

Providing and laying heavy duty precast cement conrete inter locking paver blocks vibro compacted upto M- 50 grade i/c border or kurb block grey or coloured over sub-base of concrete with 25mm thick average thickness of cement mortar 1:4 (1 cement : 4 sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks i/c curing rubbing & polishing complete (Sub base concrete floor to be paid for separatelly) including carriage of material in all leads and lifts ;- 60mm thick inter locking block.

Providing and fixing on wall faces PVC (D-Plast) for rain water pipes of working pressure not less than 4.5 kg/sqm including filling the joints with approved adhesive complete. including carriage of material in all leads and lifts;- 150mm dia pipes

Providing and fixing m.s.holder bat clamps of approved design to C.I. or S.C.I pipes embeded in and including cement concrete blocks 10 x10x10 cm of 1:2:4:mix (1 cement 2 sand 4 stone graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the wal etcincluding carriage of material in all leads and lifts;-150 mm dianetre for C.I.pipe

Providing and fixing on wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete including carriage of material in all leads and lifts

PVC Plain bend 150mm dia

PVC shoe 150mm dia

Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge

Providing and fixing ridges or hips 60 cm overall with 0.60mm thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer in Charges

Providing and fixing valley 60 cm overall 0.60mm thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-charge.

Providing and fixing flushing 38cm overall with 0.60mm thick prepainted sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia meter & prepainted G.I. limpet & bitumen washers complete with all accessories as required as per the direction of Engineer-in-Charge

Providing and fixing 15 cm. wide 45 cm. overall semicircular plain G.I. sheetgutter with iron brackets 40x3mm size bolts and nuts and washers etc. including making necessary conections with rain water pipe complete as per design including carriage of material in all leads and lifts.;-0.63mm thick sheet.

Providing and fixing M.S. BP Sheet 1.66mm to 2mm thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtelyroviding and fixing M.S. BP Sheet 1.66mm to 2mm thick in eaves board/facia /soffits/ ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer -in-charge (Base members of steel work shall be measured & paid separtely

Providing and fixing stainless steel railing mark-36 pipe size top 2" pipe, post pipe 1" and 3" height in staircases including necessary fitting and position as per design approved by the Engineer-in-Charge including carriage of material in all leads and lifts.

Steel work welded in built up sections,trusses and framed work,including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paint including carriage of material in all leads and lifts.

In beams joists channels ,angles , tee ,flats with connecting plates or angle cleats as in main and cross beams,hip and jack rafters,purlins connected to common rafters and the like.

In gratings framed guardbars,ladders,railling,brackets and similar works.

Providing and fixing M.S.fan clamp type -1 of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C slab during laying including painting the exposed portion of loop,all as per standard design complete including carriage of material in all leads and lifts;

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops,dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete including carriage of material in all leads and lifts.

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its quarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete including carriage of material in all leads and lifts.

Applying a priming coat over new steel and other metal surfaces after and including preparing the surface by thoroughly cleaning oil, grease,dirt and other foreign matter and scoured with wire brushes fine steel wool scrapers and sand paper complete including carriage of material in all leads and lifts:- With ready mixed priming paint brushing red lead. Red/oxide/zinc oxide chrome.

Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint brushing to give fair and smooth surface including cleaning the surface of all dirt, dust, dust and other foreign matter:-Enamel paint other than white including carriage of material in all leads and lifts.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering and knotting Ready mixed paint brushing wood primer pink including carriage of material in all leads and lifts.

Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint to give fair and smooth surface including cleaning the surface of all dirt, dust and other foreign matter, sand papering and stopping including carriage of material in all leads and lifts:- With white/ other than white enamel paint.

6mm Cement plaster to ceiling including carriage of material in all leads and lifts; - In Cement mortar 1:3(1Cement:3 Sand)

15mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth including carriage of material in all leads and lifts;-Cement Mortar 1:6 (1 cement:6 sand).

20mm Cement plaster in single coat on rough side of brick/stone masonry forinterior plastering upto floor two level including arrises,internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smoothincluding carriage of material in all leads and lifts;-

In cement mortar 1:3 (1cement: 3sand)

In cement mortar 1:4 (1cement: 4 sand)

In cement mortar 1:6 (1cement: 6 sand)

Extra over item no. 69.02 for finishing with a floating coat of neat cement slurry including carriage of material in all leads and lifts.

Extra cost for providing and mixing polyster triangular synthetic fibres in specified ratio 6-18 MM length designed for melting point 240-260 degree centigrade and having specific gravity of 1.33-140 as per IS-456 amendment august 2007 and IRC 44-2008 @125grams/50kg of cement bag in all types of CC, RCC,plastering and flooring work etc.

Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth. Priming coat with distemper primer including carriage of material in all leads and lifts.

Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated on ceiling and/or sloping roofs. surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth. Priming coat with distemper primer including carriage of material in all leads and lifts.

Providing plinth protection 50mm thick in cement concrete 1:3:6 (1 Cement : 3 Sand : 6 Graded stone aggregated 20mm nominal size)including carriage of material in all leads and lifts.

Providing under layer for plinth protection of 75mm thick (unconsolidated) bed dry brick/stone aggregated 40mm nominal size with rammed and consolidated and grouted with fine sand including preparation of ground including carriage of material in all leads and lifts.

Brick edging (Brick laid on edge) to plinth protection with bricks including grounting with cement mortar 1:4 (1 Cement : 4 Sand).;-With bricks size 22.9cmx11.2cmx 7cm

Constructing Course rubble hammer dressed 'U' shape open surface drain with side wall.15x22 cm in cement mortar 1:6 (1 Cement : 6 Sand) and inside plastring with cement plaster 1:3 (1 Cement:3 Sand) including earth work and laying 10 cm cement concrete in 1:5:10 (1 Cement : 5 Sand : 10 graded stone aggregate) of 40 mm nominal size) and 7.5 cm cement concrete 1:2:4 (1 Cement : 2 Sand : 4 Graded stone aggregate of 20 mm nominal size) and finished with a floating coat of neat cement complete as per standard design.) including carriage of material in all leads and lifts.

Providing chases 75mm wide 50mm deep (average size) in walls for conduit pipes and filling the same with cement concrete 1:3:6 (1 Cement : 3 Sand : 6 Graded stone aggregate 20 mm and down gauge) after the conduit pipe is laid (excluding the cost of conduit pipe)including carriage of material in all leads and lifts.

Providing and fixing to wall ceiling and floor galvanised mild steel tubes (Medium grade) tube fitting and clamps including making good the wall including carriage of material in all leads & lifts.

15 mm nominal bore

20mm nominal bore

Providing and fixing to wall ceiling and floor Polyethylene- Aluminium- Polyethylene(PE-AL-PE) composit pressure pipes confirming to IS-15450, U.V. stablized with carbon black having thermal stability for hot and cold water supply, capable to withstand temprature up to 80 degree C, including all special fittings of .composite material (engineering plastic blend and brass inserts whereever required) e.g. elbows, tees, reducers, couplers and connectors etc; with clamps at 1.0 metre spacing. This includes testing of joints complete as per direction of the Engineer-In- charge, including carriage of material in all leads and lifts.

16mm outer dia.

20mm outer dia.

Providing and laying in trenches, galvanised mild steel tubes (medium grade), tube fittings (earth work in trenches to be measured and paid separately) including carriage of material in all leads and lifts:- 20mm nominal bore.

Making connection of galvanized steel distribution branch with galvanized mild steel main 20 to 40mm nominal bore by providing and fixing tee including cutting and threading the pipes complete including carriage of material in all leads and lifts.

Providing and fixing PVC water storage tank of ISI : 12701 marked, G.I. inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground level including carriage of material in all leads and lifts;-1000 litres net capacity tank

Providing and fixing sand cast/cast iron spun spigot and socket waste and ventilating pipes (lead caulked joints to be measured and paid for separately) confirming to BIS specification including carriage of material in all leads and lifts. 100 mm nominal bore.

Providing and fixing cast iron cowl confirming to BIS specification including carriage of material in all leads and lifts.100mm nominal size.

Providing lead caulked joint to sand cast iron/cast (spun) iron pipes and fittings including testing of joints including carriage of material in all leads and lifts. 100mm nominal size.

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts.

110 mm dia.

75 mm dia.

Providing and fixing PVC single equal branch with ovel access door, ISI marked insertion rubber washer 3mm thick bolts and nutscomplete including fixing with approved adhsive etc. complete including carriage of material in all leads and lifts.

110 mm dia

75 mm dia

Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts.

110 mm dia.

75 mm dia.

Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts.

110 mm dia.

75 mm dia.

Providing and fixing PVC cowl ISI marked including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts.

110 mm dia.

75 mm dia.

Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawal plugs etc. complete including carriage of material in all leads and lifts.

110 mm dia

75 mm dia

Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete including carriage of material in all leads and lifts;-110 mm X 75 mm..

Fixing vitreous china wash down, water closet (European type W.C. pan ) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1 (1 cement ; 1 sand ) Seat and cover to be measured and paid for separately) including carriage of material in all leads and lifts;- Ordinary closet

Providing and fixing PTMT coloured/ white high density polyethylene / poly propylene 10 litres capacity ( full flush) European standard control low level flushing cistern with fittings with a pair of brackets with fittings such as lead valve, syphon, 15mm nominal size PVC ball valve with polythene float, with push button, couplings for connections with inlet, outlet and over flow pipe, 40mm dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately) including carriage of material in all leads and lifts

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts.

110 mm dia

75 mm dia

Fixing stainless steel kitchen sink of approved standard ISI make with drain board and C.P. waste with C.I. or M.S. Brackets painted white including cutting holes and making good the same but excluding fitting including carriage of material in all leads and lifts;-610X510 mm with bowl depth 200mm.

Providing & fixing consealed stop cock including carriage of material in all leads and lifts:- 15mm

Providing and fixing P.V.C connection with brass unions including carriage of material in all leads and lifts:- 300/450mm length,15mm dia

Providing and fixing stoneware gully trap grade 'A' complete with C.I grating, brick masonry chamber in cement mortar 1:5 and water tight C. I. cover with frame of 300mmx300mm size (inside) the weight of cover to be not less than 4.53kg and frame to be not less than 2.72kg including carriage of material in all leads and lifts;- Square Mouth Traps , 100mmX100mm size P or R type.

Fixing vitreous China wash basin with single/double hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings including carriage of material in all leads and lifts.;- Flat back 550mmx400mm.

Fixing vitreous China pedestal for wash basin complete recessed at the back for the reception of pipes and fittings including carriage of material in all leads and lifts.

Fixing C.P. Brass waste for wash basin or sink including carriage of material in all leads and lifts;-32mm dia

Fixing M.I. union for wash basin or sink 32mm dia confirming to BIS specification including carriage of material in all leads and lifs.

Fixing C.P. Brass shower rose with 15mm or 20mm inlet including carriage of material in all leads and lifts ;-150mm dia

Providing and fixing 100mm dia chromium plated grating of superior quality for floor, gully or nahani trap including carriage of material in all leads and lifts

Providing and fixing G.I./M.I Union of following sizes (where not included in the items) including carriage of material in all leads and lifts

Providing and fixing 32 mm P.V.C. waste pipe for wash basin or sink including brass check nut including carriage of material in all leads and lifts.

Providing and fixing plastic seat (Solid / Hollow type) and cover for wash down water closet with C.P. Brass hinges and rubber buffers including carriage of material in all leads and lifts;-white plastic seat and cover.

Fixing 600mm x 120 mm glass shelf with C.P. Brass bracket and guard rail complete, fixed to wooden plugs with C.P. Brass screws including carriage of material in all leads and lifts

Fixing toilet paper holder including carriage of material in all leads & lifts. C.P.Brass.

Fixing 600mm x 450 mm bevelled edge mirror of superior glass mounted on 6mm thick A.C. Sheet or plywood sheet and fixed to wooden plugs with C.P. Brass screws and washers including carriage of material in all leads and lifts

Fixing C.P. Brass Towel rail complete with C.P. Brass brackets fixed towooden plugs with C.P. Brass screws including carriage of material in all leads and lifts;-600mmx20mm

Fixing Mixer for kitchen sink with casted swinging spout at top including carriage of material in all leads and lifts

Providing and fixing brass full way valve with wheel including carriage of material in all leads and lifts.

15mm nominal bore

20mm nominal bore

Fixing chromium plated brass soap dish with C.P. Brass brackets fixed to wooden cleats with C.P. Brass screws including carriage of material in all leads and lifts

Fixing C,P brass pillar tap with capastan head including carriage of material in all leads and lifts;-15mm dia

Fixing C,P brass bib tap Long body with capastan head including carriage of material in all leads and lifts;-15mm dia

Fixing C,P brass bib tap short body with capastan head including carriage of material in all leads and lifts;-15mm dia

Providing and fixing PTMT jet spray of approved quality and colour with one metre tube including carriage of material in all leads and lifts

Fixing C.P. brass angle valve 15mm without Nuts and pipe including carriage of material in all leads and lifts

Cutting holes through existing brick work including making good the same in cement mortar 1:6 (1 cement: 6 sand) per CMs. Depth of cutting including carriage of material in all leads and lifts;-Holes upto and including 400 Sq.cm in area.

Constructing manhole with RCC top slab in 1:2:4mix(1cement:2sand :4graded stone aggregate 20mm nominal size) foundation concrete 1:4:8(1cement:4sand:8graded stone aggregate40mm nominal size) inside plastering 15mm thick with cement mortar 1:3(1cement:3sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4mix (1cement:2sand:4graded stone aggregate 20mm nominal size)finished smooth complete including curing and testing including carriage of material in all leads and lifts:

Inside size 800mm x 800mm x 500mm deep including S.F.R.C cover with frame (light duty) total weight of frame and cover to be not less then 173 kg weight of frame 103 kg weight of cover 70 kg with 230 mm thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3(1cement:3sand). including carriage of material in all leads and lifts.

Providing and laying , jointing and testing in trenches centrifugally cast spun ductile iron pipes conforming to BIS 8329-2000 (latest with up to date amendments) in a lenght of 5.50 meters class K7 with cement mortar ning in side duty ISI marked including cost of Tyton (push or joints) fitting including testing of joints and rubber gasket (S&R quality) conforming to IS-92820-1989( Earth work in trenches to be measured and paid for separetely) including carriage of material in all leads and lifts;-150mm dia

Providing 200mm wide cast iron rungs with chequered or ribbed non-slip surface including fixing in manholes/ septic tank with 200mmx200mmx100mm cement concrete 1:3:6(1cement:3 sand:6graded stone aggregate 20mm nominal size) including carriage of material in all leads and lifts.

Supplying and fixing cast iron cover with frame for manhole of internal diamensions 450x610mm rectangular C.I cover (light duty) single seal pattern-I, the weight of cover and frame to be not less than 38kg. (Weight of cover 23kg and weight of frame 15kg), including carriage of material in all leads and lifts.

Constructing soak pit 2.5 metre diametre 3.00 metre deep with45x45cm dry brick honey comb shaft with bricks of class designation 75 and soil waste drain pipe 100mm diameter 1.80 metre long as per standard design with F.P.S. including carriage of material in all leads and lifts.

KDN Infrastructure Pvt. Ltd.