SPECIAL REPAIR TO BUILDING NO P-164 AND P-165 AT AF STN WADSAR AT 47SU AF STN WADSAR

Amount

Dismantling of floor hearth or wall tilling including cement mortar bedding and removal out side MD land complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid and bedded and pointed in any mortar complete all as specified and directed.

M&L 25 mm thick PCC 1:2:4 type B0 (12.5mm graded aggregate) as in levelling course complete all as specified and directed.

M&L for 15 mm thick screed bed or bedding layer of mortar for laying floor finishes CM 1:6 complete all as specified and directed.

M&L for Non- skid Ceramic coloured joint free tiles 7 to 8mm thick (square/Rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L glazed ceramic coloured tiles 450x350mm x 7mm thick in vertical surface etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick backing coat of CM 1:4 etc complete all as specified and directed.

M&L for Non- skid Ceramic coloured joint free tiles 7 to 8mm thick (square/Rectangular) area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm, (size of tile 600x600mm) in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

All as per item No 7 here in before but glazed ceramic tiles in skirting including backing coat of CM 1:4, 10 mm thick complete all as specified and directed.

M&L for machine cut kota stone slab flooring 15-18 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for 15-18mm machine cut kota stone slab in single piece with round nosing with three numbers of serration as in treads of steps for staircase laid over cement screed bed and jointed with grey cement slurry mixed with pigment to match the shade of of the slab including rubbing complete all as specified and as directed by EIC over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M & L for machine cut kota stone 15-18 mm thick (single peice in raiser of steps), skirting, dado and window cills and jambs laid and jointed with grey cement slurry including cutting and polishing over and including 10 mm backing coat in CM 1:3 complete all as specified and directed.

Demolition of wall of brick and stone wall built in cement mortor incl all quoins, archs, pillars,etc complete all as specified and directed.

M&L for brick work sub class B bricks, straight or curved on plan exc 6.00 m to any radius built CM 1:6 complete all as specified and directed.

Taking down cement or cement lime plaster any description on brick or stone wall/ celling including raking out joint , haking for key scrubing with water etc complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of concrete or block masonary CM 1:6 finished even and smooth (without using extra cement) in internal surface of wall complete all as specified and directed

All as per item No 15 here in before but 10 mm tnick CM 1:6 and setting coat 5mm thick CM 1:4 mixed with WPC in external surface of wall including scaffolding complete all as specified and directed . Note:- WPC shall be measured and paid in revalent item of this schedule.

All as per item No 15 here in before but 5 mm thick in ceiling surfaces CM 1:4 complete all as specified and directed

Taking up or down 15mm dia steel tubing and connection complete all as specified and directed.

All as per tem No 18 here in before but 20 mm dia complete all as specified and directed.

S&F 15 mm dia steel tubing medium grade galvanised with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

All as per tem No 20 here in before but 20 mm dia.

Taking down and refixing of 20mm steel tubing and connections in new or old position (walls, ceiling, floors etc) complete all as specified and directed.

S&F in repair Fancy type CP bib taps 15 mm dia ,chromium plated cast copper alloy with half turn type apstan/crutch heads, screwed down screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair Fancy type CP stop cock 15mm dia cast copper alloy, chromium plated fency type screwed down high pressure with half turn type apstan/crutch heads, screwed both end for iron pipe or for unions and fixed complete all as specified and directed .

S&F in repair Fancy type CP angular cock 15mm dia cast copper alloy, chromium plated fency type screwed down high pressure with half turn type apstan/crutch heads, screwed both end for iron pipe or for unions and fixed complete all as specified and directed

S&F in repair Fancy type CP stop valve 15mm dia cast copper alloy, chromium plated fency type with long shank and cup (concealed type) screwed down high pressure with half turn type apstan/crutch heads, screwed both end for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair 75 mm dia outlet CI nahani trap plain with S/S grating including jointing with solvent cement complete all as specified and directed.

S&F in repairs Vitreous china wash basin with pedestal flat back size 550X400 mm white, excluding taps, waste ,chain and plug and chain porcelain stopper but including brackets cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed.

S&F 15 mm dia pillar tapes Fency type of Chromoum Plated brass with half turn type apstan/crutch heads screwed down high pressure, with or without lettered hot and cold with long shank, screwed shanks and fly nuts, screwed for iron pipes or for WHB complete all as specified and directed.

S&F PVC waste pipe LDPE of 32 mm dia for sink complete all as specified and directed.

S&F waste coupling of 32/40mm dia brass CP for glazed ware sink basins, etyc with long screwed shanks and fly nuts fanges end bedded in red lead cement and other end fixed complete all as specified and directed

S&F PVC water connection 600 mm long to wash basin of 15mm dia including CP nuts and washers complete all as specified and directed.

S&F in repair 125 mm dia Fancy type CP shawer rose complete all as specified and directed.

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S& F for glass corner shelf 12 x 12 inch wall mount with 5mm thickness with SS railing complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan semi- pedestal pattern with trap front or back inlet including seat cover of any pattern and health faucet (ABS) with rubit cleaning system 1.25 m long, PVC flexible tube and ABS wall hook complete all as specified and directed.

S&F in repair of low level flushing cystern 10 ltrs capacity body moulded from virgin quality high impact poly propoliyone and functional parts moulded from engneelicy grade ABS nylon and nylon glan complete incl brackets and 15mm bore 450mm long PVC connection complete all as specified and directed.

S & F in repair brass chromium plated tubular towel rail 20 mm dia 'D' type 60 cm long including brackets/flanges completed all as specified and directed.

Taking down CI pipe 100mm/75mm of any description complete all as specified and directed.

S&F for CI waste and vent pipes in any length with or without ears, fixed to wall dia of pipe 100mm complete complete all as specified and directed.

All as per item No 41 here in before but 75mm dia in floor.

S&F 100mm cast iron sanitary connection-short connection pipe of length upto 300-450mm socket to fit WC out-let complete all as specified and directed.

S&F 75mm cast iron sanitary connection-short connection pipe of length upto 300-450mm socket to fit WC out-let complete all as specified and directed.

M&L for bends of any type radius diminishing pieces or tapes ( large bore measured) of 75mm dia bore with oval access doors etc. complete all as specified and directed.

S&F cast iron bend 100mm bore (any radius) dimnishing pieces or tapers with oval access doors etc. complete all as specified and directed.

M&L for branch piece single (equal and unequal) ordinary or inverted (spigot or socket type) or with parallel branch of 75mm dia with oval access door complete all as specified and directed.

S&F 100mm bore Branch piece, single (equal or unequal ) ordinary or inverted (spigot or socket type) with parallel branches with oval access door complete all as specified and directed.

S&F CI cowl of 100mm dia complete all as specified and directed.

S&F rotational moulded polyethylene water storage tank of 750 ltrs capacity (cylindrical verftical with closed top) hoisted and fixed in position including Dismantling of water tanks of exc 500 ltrs and nexc 1000ltrs in capacity complete all as specified and directed.

S&F in repair stainless steel sink 1mm thick without drainage board for kitchen with plugs, washers and wastes coupling 40mm; including bedding in cement mortar to dwarf wall or including fixing into inside granite slab and including cutting of shape and size and connecting union to pipe overall size 495mm x 420 mm,bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed

S&F 18/19mm thick marine plywood (12 Nos of ply) grade BWR, type BB fixed with screw to timber frame work or ply wood including Ist class HW fillets of bullnosed splayed, chamfered or rouned edge etc. exc 3 and n exc 6 sqcm. complete all as specified and directed

S&F for decorative laminates of 0.9mm thick type 1, or mat finish, colour and pattern as approved adhesive complete all as specified and directed.

S&F for white laminates of 0.8mm thick glossy finish colour and pattern as approved adhesive complete all as specified and directed

S&F for hasp and staple aluminium anodised safty type with hinges pin including bolt to hinges plate and fixed with screws of size 100mm complete all as specified and directed.

S&F CP decorative type brass handles 75mm long fixed to plywood or frame complete all as specified and directed.

S&F 80mm Auto SS hinges of crank 0 degree to 90 or 180 degree, fixed with screws to plywood or frame work as per sample complete all as specified and directed.

S&F stainless steel telescopic channel of size 450mm to 560mm of load per 45 kg/cmsq as per sample as per sample complete all as specified and directed.

S&F Steel locking magnetic and connected plate to shutter and frame as per sample complete all as specified and directed.

S&F cupboard knob brass polished 40mm dia fixed with screwed and washer of mild steel complete all as specified and directed.

Taking down chowkats or frame exc 1.5 Sqm and n exc 4Sqm each (without taking off shutter from the frame) complete all as specified and directed.

Taking down chowkats or frame n exc 1.5 Sqm each (without taking off shutter from the frame) complete all as specified and directed.

Taking down and refixing door shutter only of any description exc 1 Sqm n. exc 2 Sqm and resecuring or easing & adjusting of the shutter refixing the same opeing etc complete all as specified and directed.

Taking down shutter only of any description exc 1Sqm n. exc 2Sqm and removing complete all as specified and directed.

M&L for 32 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, kiln seasoned and chemically pressed treated and complete all as specified and directed.

M&L for 35mm thick 2nd class hardwood glazed and skeleton shutter open rebeted and prepared to receive glass gauze etc (without shash bar ) edges of framing plain chamfered or rounded filled with cut and mitered beads for securing, glass etc size of member of shutter as per specified in SSR Part-I section 8,clause 8.24(a) supplied and fitted to chowkats complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia wire and average width of aperture 1.14mm and fixed with stainless steel wire staples complete all as specified and directed.

M&L Aluminium powder coated (powder coated of requried colour) three track sliding windows frame top & sides of size 92x31.75x1.50mm (section No 20831), bottom size 92x31.75x1.50mm (section No 20832) and shutter top & bottom of size 40x18x1.55mm (section No 20736) and sides (handle) of size 40x18x1.55mm (section No 20738) and lock side shutter frame of size 40x18x1.45mm ( section No 20737)" with rubber gasket, beading and locking arrangement and rollers etc including making good to the disturbed portion complete including stainless steel wire mesh 0.36mm nominal dia of wire with 1.40mm average aperture and fixed with stainless steel wire staples and fixing 5mm thick glass with necessary rubber beading gasket etc complete all as specified and directed by Engr-in-charge.

S&F for aluminium ventilator, louvers type, frame top & bottom of size 31x42x1.60mm (section No 20558) rectangular tub of size 40x20x2mm (section No 14019 and middle vertical of size 42x46.20x1.60mm Section (20560) and clip for fixing wire mesh and glass of size 19x17.30x0.90mm (section No 19360) thick including stainless steel wire cloth 0.36mm nomonal dia of wire and 1.40mm average width of aperture and fixed with stainless steel wire staples and supply and fixing 5mm thick forsted/pinheaded glass louvers with blades of 100mm heavy duty with necessary rubber beading, gasket etc complete all as specified and directed.

S&F aluminium powder coated (requried colour to match window colour) grill of 5.00 mm dia squares rectangular triangular circular shape aperture n.exc 5.00 cm in length or width fixed with H or F channel complete all as specified and directed.

S&F for solid PVC door frame of size 50mm x 47mm made out of 5mm prelam colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specifications & drawings complete all as specified and directed.

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2,4 or 6 raised panel designed with 2mm thick moulded PVC sheet on front face and 2mm plain colour PVC sheet on back face as per specification and drawing complete all as specified and directed.

S&F for 75mm long butt hinges, medium weight, cold rolled mild steel and fixed complete all as specified and directed.

S&F for 100mm long butt hinges, medium weight , cold rolled mild steel and fixed complete all as specified and directed.

S&F for 200mm long aluminium anodized barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F aluminium alloy anodized sliding door bolt with haps and staple (bolt type) and fixing clip of sheet cast or extruted section or cast aluminium alloy and fixed length of bolt 300mm complete all as specified and directed.

S&F for 150mm long aluminium handle cast type anodized complete all as specified and directed.

S&F 150mm long Floor door stopper of brass body and tongue, with hard drawn steel spring, fixed to bottom of door shutter complete all as specified and directed.

M&L for grante work (of any type) 20 mm thick (table rubbed and polished) as in cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite etc complete all as specified and directed.

M&L Preparation of new steel surface of any description 10cm width or girth not other wise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chromate primer complete all as specified and directed.

All as per item No 80 here in before but one coat on old steel surfaces.

M&L for preparation of new wooden surface of any description not otherwise described over 10cm width or grith and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

All as per item No 82 here in before but one coat on old wooden surface except primer.

M&L for preparation of new plastered surface of wall and applying two coats of distemper oil emulsion over a coat of primer over a sufficent coat of Birla wall putty complete all as specified and directed.

M&L for complete removal of existing treatment of wall surface and applyiong two coat of distemper oil emulsion over a coat of primer over a sufficient coat of Birla wall putty in old surface of wall complete all as specified and directed.

M&L for preparation of new plastered surface of ceiling and applying three coats of white wash complete complete all as specified and directed.

All as per item No 86 here in before but two coats of white wash on old ceiling surface.

M&L for preparation of new plastered surface of wall and applying two coats of weather proof 100% acrylic paint over a coat of primer complete all as specified and directed.

M&L for complete removal of existing treatment of wall surface and applyiong two coat of weather proof 100% acrylic paint over a coat of primer in old surface of wall and filling cracks with white cement etc complete all as specified and directed.

Dismantling of PCC floor of any description not otherwise specipcally provided for and Removing of existing unserviceable water proofing treatment of any description and cleaning of top surface of cement concrete flushing out junction of parapet walls & washing down with water to remove all dirt etc including preparation of surfaces to receive new treatment and removing the rubbish off premises.

M&L for 10mm thick screed bed in CM 1:3 mixed with WPT 3% by weight of cement all as specified and directed complete all as specified and directed. Note : WPC shall be measured and paid separately.

M&L for applying tack coat cold bituminous primer / industrial bitumen 85/25 @ 1.20 kg/ Sqm conforming to IS 3384 for fixing of laying APP polymer modified membrane complete all as specified and directed.

M&L for laying 3mm thick APP polymer modified membrane 3.0 to 3.5Kg/Sqm in weight with non-woven polyster reinforcement (mineral gravel finish on upper side of the membrane) and sealing all overlaps of 100mm in length side and 150mm on width side of membrane by torching the same as per manufacture instruction and all as per specified particular specification complete all as specified and directed.

Supply only intergral water proofing compound.

S&F 28 mm dia aluminium powder coated drapery rod including socket and bracket complete all as specified and directed.

S&F 50mm dia bore pipe low density LDPE fixed to wall, ceiling or in floors etc complete all as specified and directed.

Cutting chases,in brick walls pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of andings steps, cills sunshades, shelves lintels etc and cutting chases for concealed water tubing and making good cutting not exc 10 cm grith complete all as specified and as directed.

M& L for demolition of cement concrete (unreinforced) in ground floor and pavings n.exc 150 mm thickness (below or above ground level ) including removal of rubbish from the site complete all as specified and directed.

M& L for cement concrete type C-2 1:3:6 (40mm graded aggregate) 75mm thick as in plinth protection finsihes even and fair without using extra cement fininshing exposed edges fair for rounding and in phase every 2 mtr for length and joints shall be finished with bitumen and sand mixxture 1:3 complete all as specified and directed.

M & L for water proofing treatment in WC & bathrooms by applying cement slurry mixed with water proofing chemicals as per manufacturer's specifications of approved make as under:- (a) All corners of WC, bath shall be rounded by providing fillet of dia 75mm. (b) 15mm thick rendering on floor in CM 1:3. (c) Applying cement slurry @ 0.488 kg/sqm. (d) 200 micron thick polethene film of approved make with approved adhesive. (e) Including demolition of lean concrete in sunken floor and refilling of lean concrete 1:5:10.

M&L PVC (SWR) gully trap 125/110 mm setting and jointed with solvent cement complete all as specified and directed.

S & F in repair stainless steel plate rack of size 750x600x250mm of approved make including taking down old wooden plate rack complete all as specified and directed.

Demolition of Concrete (unreinforced) of any description and in any position not otherwise specifically provided in cement concrete complete all as specified and directed.

M&L for providing 75 mm thick cement concrete 1:4:8 type D-2 (using 40mm graded aggregate) as in sub base complete all as specified and directed.

M&L for Machine pressed precast conctete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness M-35 Grade over sand cushion. (Note- Sand will be measured and paid separately)

M & L 25mm thick sand filling (sand cushioning) under path for laying interlocking tiles complete all as specified and directed.

M&L Pre- painted Galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.

S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; Flat Ironwelded framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F Welded steel wire fabric supplied and fixed complete to steel members of weight not exceeding 4 kg per sqm complete all as specified and directed.

S&F 125mm long heavy weight cold rolled mild steel hinges and fixed to frame with scrwewd or welding complete all as specified and directed.

S&F 150mm long Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed as per specified and directed.

Taking out existing unserviceable plaster, loose unsound weaken cement concrete of any description and in any position from existing surface of RCC roof slab/ RCC facia/ beams/ columns/ RCC chajja, average depth 25mm (approximate 6.5 mtrs height from natural GL) with power driven pneumatic chiesel and removal of debries upto a distence 500 mtrs out side MD land including saw cutting of all edges, making square shoulders of cavaties and roughening of smooth surface, scraping out and removing corrosion and all loose scales, rust etc. from the visible reinforcement and cleaning the steel reinforecement properly providing NIT zink primer to form a contineous film and preparing the surface to receive concrete of epoxy grouting mortar etc. including providing necessary scaffolding complete all as specified and as directed.

M&L for applying bonding coat of modified styrene butadene emulsion in proportion 1 part (bonding agent) : 1 part (water) : 3 part (OP cement) by volume with the brushes etc. to bind new cement plaster/ polymer modified plaster/ concrete/ screed concrete with oldsurface including removal of loose/ distengrated old concrete/ plaster including preparation of surface etc. complete all as specified and as directed.

M&L for applying 25-35mm average thickness plaster on ceiling slab and chajja projections, facia and beams with polymer modified mortar firtified with SBR in proportion 1 part (cement) : 3 part (sand) by weight of cement with 11 to 15 ltrs water addition, finishing surface to match with existing adjoining surface complete all as specified and as directed.

M & L in repair for concealed point wiring complete with FRLS PVC insulated /unsheathed stranded copper conductor of wire 1.5 Sqmm , 1100 volt grade , alongwith one single core of same size stranded copper as continuous earth wire to common earth dolly, drawn through in existing conduit pipe fixed in concealed surface of wall/ceilling/false ceilling including cutting /chasing in wall as required with powder coated sheet metal terminal boxes of required sizes and thickness (factory made) sunk in wall only with 3.0mm thick laminated sheet where as required and accessories complete. Incl taking down old u/s point wiring. suitable for the following :- (a) One light/fan point controlled by one, one way switch

(b) All as per item No 115 here in before but one socket outlet 05 Amps on the same board

(c) All as per item No 115 here in before but one socket outlet 05 Amps on independent board

(d) All as per item No 115 here in before but one bell/buzzer point controlled by on bell push

(e) All as per item No 115 here in before but one light point controlled by two way switches

All as per item No 115 here in before but point wiring with 2.5 Sqmm cable and 2.5 Sqmm earth continuity conductor for 3 pin 15 Amp socket and complete all as specified and directed.

S&F in repair 8 way sheet metal enclosures for flush/surface mounting distribution board double door, 240 volts factory made and tested complete, suitable for mounting MCBs with 200 Amps rated bus bar, cable lugs complete all as specified and directed.

M&L in repair for earthing complete with galvanized steel earth plate electrode 600x600x6mm thick electrode, buried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to 4 mm dia galvanized earth wire by means of bolts, nuts, check-nuts and washers of galvanized iron or steel all as shown in electrical plate No 5 (duly protected with 15 mm dia light grade GI pipe upto 7.5m from the earth plate) and connected to GI steel earth plate including charcoal, dust, common salt, necessary excavation in soft/loose soil, returning, filling in and removal of surplus soil to a distance not exceeding 50 m from the starting point, watering pipe 20 mm bore GI tube of light grade treated with 1 No PGI funnel, pit of PCC 1:2:4 type B-1/ RCC 1:2:4 type B-1, pit cover 75 mm thick reinforced with 6 mm dia bars @ 75 mm c/c both ways and with MS handle 12 mm dia connected to earth test point including testing complete all as specified and directed. Incl taking down old u/s one.

S&F in replacement of miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP 240V, 10 KA 'C' curve, in the DB Complete with connection testing and commissioning all as specified and directed.Incl taking down old u/s one.

All as per item No. 123 here in before but SP 40 AMP capacity.

All as per item No. 123 here in before but TPN 40 to 100 AMP capacity ,415 volt.

S&F Switch piano, single pole one way 5 Amps 240 volt capacity flush type complete all as specified and directed.

S&F Switch flush type, 05 Amp single pole, two way complete all as specified and directed.

S&F 3 pin 5 Amps Socket outlet , flush type complete all as specified and directed.

S&F Bell push piano type, single pole one way 5 Amps 240 volts capacity flush type complete all as specified and directed.

S&F electric bell ding dong AC 230 volt single pole complete all as specified and directed.

S&F 5 pin, 5 Amps switch & socket combination flush type multipurpose 3 pin, 5 Amp flush type universal complete all as specified and directed.

Supply and fix 3 pin 15 Amps switch socket combination, flush type multi purpose 2 in 1 type (3 pin 5 Amps and 15 Amps) complete all as specified and directed.

S&F ceiling rose, 5 Amps surface type 240 volts bakelite three terminal as ordered and directed.

S&F fan regulator electronic step type 230 volts suitable for any type of ceiling fan sweep complete all as specified and directed.

S&F on wall, Plug and socket in sheet steel enclosure with Single pole & earth, suitable for 20 Amp with providing MCB SP 20 Amp suitable for single phase AC supply.

S&F holder brackets/angle suitable for any type of lamp(as per sample ordered) complete all as specified and directed.

S&F 12 watt ball type LED lamp complete all as specified and directed.

S & F in replacement of LED batten fitting alongwith removable LED Tube 20W, 230 Volt, 6000K, wall /ceiling mounted ,LED batten fixed by means of bolts,ABS rotor suitable for single side connections. LED rod having glass material complete haivng lumen efficacy minimum 100 lm/w,CCT 6500 K, powered by integral constant current driver suitable for 240 V AC with all accessories internallly prewired including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.

Supply and fixing in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply, laying & testing cable XLPE insulated, screened ,PVC bendded galvanized steel strip or wire armoured electric power cables (heavy duty) with stranded aluminium conductor 1100 volts grade, of size 25 sq mm. 3.5 core complete all as specified and directed.

Excavation in trenches not exceeding 1.5m width and not exceeding 1.5 m in depth and getting out in soft/ loose soil for taking up/ laying cable/ pipe etc. complete all as specified and as directed.

Returning, filling in trenches, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft/ loose soil complete all as specified and as directed.

Removal of excavated material at a distance not exc. 50 mtr and depositing where directed at a level not exc. 1.5 mtr above the starting point in soft/ loose soil complete all as specified and as directed.

Supply and laying dry sand cushioning to underground cable with screened, washed river sand, including punning gently complete all as specified and as directed. Note:- Thickness after punning will be measured for payment.

M&L for burnt brick sub class 'B' laid in trenches for cable protection abutting each other width equal to length complete all as specified and as directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm sweep complete all as specified and as directed.

M & L for Painting of ceiling fans complete, in situwith synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. complete all as specified and as directed.

Sharnamsingh and Co

divyarsh entrprise