Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.3 LAccepted-AOC | L1 | Accepted-AOC Accepted being L1 | |
| 2 | L2₹23.6 L+₹1.3 L (6.04%)Rejected-Finance | L2 | Rejected-Finance Rejected being higher than L1 | |
| 3 | L3₹23.9 L+₹1.6 L (7.16%)Rejected-Finance | L3 | Rejected-Finance Rejected being higher than L1 | |
| 4 | L4₹24.1 L+₹1.8 L (8.15%)Rejected-Finance | L4 | Rejected-Finance Rejected being higher than L1 | |
| 5 | L5₹24.5 L+₹2.2 L (9.87%)Rejected-Finance 32 LOOTERY MOHAL ORDERLY BAZAR PO BARRACKPORE DIST 24 PARGANAS NORTH KOLKATA 700 120 W B | KOLKATA | 24 PARGANAS NORTH | WEST BENGAL | 700120 | L5 | Rejected-Finance Rejected being higher than L1 |
Tender Value
₹22 L
EMD Value
₹44,000
Closing Date
23 Sept 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF Barrackpore
GE AF Barrackpore Post Barrackpore Dist 24 Parganas North Kolkata 700120
PROVN OF RCC OPEN DRAIN AT AF CAMP JAFFARPORE UNDER GE (AF) BARRACKPORE
2024_MES_669967_1
8534/BKP/AF OF 2024-25
Open Tender
Civil Works
Item Rate
180 days
GE AF Barrackpore
Class-E,
Category-a(i)
2 documents required · 2 mandatory
₹500
GE AF Barrackpore
₹44,000
Yes
12 Nov 2024
2 Sept 2024
25 Sept 2024
2 Sept 2024
23 Sept 2024
16 Sept 2024
Amount
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting outcomplete all as specified and directed.
Material and labour for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate ) as in foundation, filling and mass concrete complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 250mm in soft/loose soil, complete all as specified and directed.
Removing excavated material not exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point as in soft/loose soil complete all as specified and directed.
Material and labour for pre-cast RCC (1:2:4) type B1 (using 20 mm graded stone aggregate) in landings, cover slabs, chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and set in cement mortar (1:6) complete all as specified and directed.
Material and labour for mild steel TMT bar 10 mm dia and over cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
Material and labour for reinforced cement concrete M-25 (Design Mix) (using 20mm graded stone aggregate) as in walls, retaining walls, basement walls, ballast walls and the like; any thickness including attached pilasters and buttresses complete all as specified and directed.
Material and labour for reinforced cement concrete M-25 (Design Mix) (using 20mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams, plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
Use and waste of form work to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter with rough finished flat surfaces of concrete complete all as specified and directed.
Material and labour for 15mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar (1:4) and finish the surfaces even and smooth without using extra cement as in wall complete all as specified and directed.
Material and labour for PCC (1:3:6), type C1, (using 20mm graded stone aggregate), as in coping, benching, haunching, bed plate, kerbs, water troughs and like including weathering, slightly rounded or chamfered angles and throating, including necessary formwork complete all as specified and as directed
Material and labour for PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in concrete bed to drain pipe including packing under and haunching against the sides of concrete pipe 300mm bore after they are laid and tested complete all as specified and directed.
Material and labour for reinforced concrete pipes, class NP2, laid and jointed complete with collars laid in trenches 300mm bore complete all as specified and directed.
Material and labour for brick work with fly ash bricks, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.
Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.
Material and labour for hardcore of broken stone or boulder of gauge n.exc 63mm, deposited, spread and leveled in layers n.exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.
Material and labour for 150 mm thick soling (or sub base) with broken boulders or quarried stone, inter stices filled, surface formed and rolled and consolidated to required gradient and camber complete all as specified and as directed.
Material and labour for 100mm thick PCC (1:4:8), type D-2, (using 40mm graded stone aggregate) as in sub base complete all as specified and directed.
Materials and labour for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.
Material and labour for 100mm thick PCC (1:2:4), type B-1, (using 20mm graded stone aggregate) as in floor and pavings including finishing the concrete surface even and smooth without using extra cement complete all as specified and directed.
Material and labour for rubber moulded machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and pigment complete all as specified and directed.
Material and labour for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred /stopped ends etc complete all as specified and directed. Note:- Only inner girth shall be measured for payment.
S. N. ENTERPRISE (BID ID -3107114)
BISWAS CONSTRUCTION (BID ID -3105949)
VISHAL ENTERPRISE (BID ID -3108039)
Das and Brothers (BID ID -3106754)
BHAUMIK CONSTRUCTION (BID ID -3107651)
Renuka Fero Products (BID ID -3107346)
M/S. B. N. CHATTERJEE (BID ID -3107829)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .