Repair to Wall Panelling, Roof sheet, Plaster and Brick works etc of Temp/Permt Bldg at Lower area of Nimu Under AGE (I) Nimu

Amount

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, roof coverings & wall.

S&F 0.63mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with 'L' type or 'J' type or cranked hook bolts in lieu of screws and washers, in roofs, walls etc. with grade of zinc coating 275..complete and all as specified and directed byEngr-in-charge.

S&F 0.63mm thick Plain, Galvanised, mild steel sheeting in ridges, hips, valley gutters straight flashings and etc (length and girth as fixed) with grade of zinc coating 275.complete all as specified and directed by Engr-in-charge.

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed by Engr-in-charge.

All as per item No 04 here-in-before but plain PPGI sheet.

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beams, tee, angle, channel or flat sections) including distance piece, cleats etc Fe 410-W (Gde - E - 250) Quality 'A'.all as specified and directed by Engr-in-charge.

M&L applying two coats of synthetic enamel painting to new surfaces steel based over a coat of red oxide primer exc. 10 cm width/girth including preparation of surfaces including filling with filler where reqd all as specified and directed.

M&L applying two coats of synthetic enamel painting to old surfaces steel based exc. 10 cm width/girth including preparation of surfaces all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness including cover fillets.

S&F 9mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work as in walls all as specified and directed by Engr-in crage.

S&F 9mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work as in Ceilling.

Dismantling timber scantling 40 sqcm and over in section, in any position in unframed work as in rafter, purlins etc all as specified and directed by Engr-in-charge.

M&L second class Hard wood in clean sawn timber fixed in scantlings as in purlins, rafters etc.

Dismantling timber scantling as in fillets, rails, posts, rafters, purlins, etc. under 40 sqcm in section in any position as in unframed work.

M & L Plain fillets. exc. 13 and n.exc 25 Sqcm as in square, rectangular or triangular in section, clean sawn, secured with nails or brads.all as specified and directed by Engr-in-charge.

All as per item No 16 here in before but exc 3 & n.exc 6 Sqcm in bullnosed, splayed, chamfered or rounded on one or both edges or face as in beading all as specified and directed by Engr-in-charge.

Demolition in precast cement concrete walling built in cement mortor including all quoins, arches, pillars, etc all as specified.

M&L for PCC 1:3:6 type C-1 using 20mm graded crushed stone aggregate) block masonry with solid block exc 10cm in width and set as in wall etc in CM 1:4 complete all as specified and directed by EIC.

Taking down cement plaster of any description all as specified and directed by Engr-in-charge.

M&L for Rendering 10mm thick on fair faces of brickwork or concrete surfaces in cement mortar (1:6) and finished even and smooth without using extra cement all as specified and directed by Engr-in-charge.

M&L for Rendering 12mm thick on fair faces of brickwork or concrete surfaces in cement mortar (1:6) and finished even and fair without using extra cement all as specified and directed by Engr-in-charge.

M&L preparing new plastered surfaces of walls and applying three coats of white wash on walls all as specified and directed by Engr-in-charge.

M&L preparing new plastered surfaces of walls and applying two coats OBD on walls all as specified and directed by Engr-in-charge.

M&L preparing new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer all as specified and directed by Engr-in-charge.

M&L preparing old plastered surfaces of walls and applying single coat of white wash on walls all as specified and directed by Engr-in-charge.

M&L preparing old plastered surfaces of walls and applying single coat OBD on walls all as specified and directed by Engr-in-charge.

M&L preparing old plastered surfaces of walls and applying single coat of cement base paint all as specified and directed by Engr-in-charge.

M/S SONAM NAMGIAL

osho traders