E.T.No.-EDC(USN)65/2025-26

Annexure-A (LABOUR CHARGES)

Excavation of earth for stay pit of size 0.6x0.6x1.2 mtr in all types of soil including proper dressing of sides and ramming of bottom including getting out the excavated soil and disposal of surplus excavated soil as directed complete work

Fixing, tightening and nozzling of stay with pole and stay rod on required tension as per drawing/manual in LT line.

Grouting of Stay in size 0.6x0.6x0.3 in CC ratio 1:4:8 (1 cement : 4 graded stone 20mm nominal size : 8 coarse sand ) block including cost of Cement, sand and stone ballast back filling of soil and boulders in pit and ramming and proper alignment, leveling as per RESSPO Manual.

Excavation of earth for pole pit of size 0.9x0.6x1/6 of full length of pole for erection of pole in all types of soil including proper dressing of sides and ramming of bottom including etting out the excavated soil and disposal of surplus excavated soil as directed complete work.

Erection of PCC single support pole in proper level and alignment along with fixing of all accessories like top channel & clamps as per RESPO manual.

Muffing of poles size 0.45x0.60 cm radius with 1:3:6 (1 cement:3 coarse sand :graded stone 10 mm nominal size) block size 45 cm height from ground level including cost of cement, stone and sand etc.

Dismantling of existing LT line. including disc fitting, Insulator, clamps, Nut & Bolts and consumer connections and Street light connections etc. including rolling of conductor and cartage back from site to JE store(1P 2W ACSR Weasel).

Dismantling of existing LT line. including disc fitting, Insulator, clamps, Nut & Bolts and consumer connections and Street light connections etc. including rolling of conductor and cartage back from site to JE store(2P 3W ACSR Weasel).

Dismantling of existing LT line. including disc fitting, Insulator, clamps, Nut & Bolts and consumer connections and Street light connections etc. including rolling of conductor and cartage back from site to JE store(3P 4W ACSR Weasel).

Fixing of D type bracket on LT line as per direction of Engineer in Charge.

Cartage of PCC Poles from store centre to construction site with loading, unloading at both points and proper stacking.(Distance 21-50 Km)

Cartage of other material (other than poles) by vehicle from Store Center to nearest construction site Store including loading and unloading at both ends(distance 0-20 Km)

Disconnection and reconnection of consumer connection.

Installation of LT Distribution Box complete work both 1 Phase and 3 Phase.

Laying, Sagging & binding of AB cable of size 120 sqmm.(Only for cable, additional provisions to be made for matching accessories installation, case of any network modification i.e additionalpole etc. and for actual connection,disonnection as per site condition.

Straightning of Tilted STP Poles as per direction of Engineer in Charge.

Tightening of Stay Set as per direction of Engineer in Charge.

Fixing of MS Clamp as per direction of Engineer in Charge.

Fixing of Ded end Clamp with I Hook as per direction of Engineer in Charge.

Fixing of Suspension Clamp with I Hook as per direction of Engineer in Charge.

Supply & fixing of Stay clamp with N&B for SP-55 pole.

Erection of Ded End Clamp as per direction of Engineer in Charge.

Erection of Suspension Clamp as per direction of Engineer in Charge.

Supply and Fixing 3Ph. Distribution Box as per direction of Engineer in Charge.

Fixing of Piercing connector 120-35 sqmm as per direction of Engineer in Charge.

Fixing of PG Clamp 95-95 Sq.MM as per direction of Engineer in Charge.

Fixing of special type Hold Clamp for GI Hook as per direction of Engineer in Charge.

Looping and chopping of tree branches near HT/LT line.

Annexure-B (SUPPLY ITEMS) (As per UPCL Specifications)

Supply of Suspension Clamp Eye Hook LT ABC Cable.

Supply of Dead End Clamp with I Hook

Supply of Insulated PRC (IPC 95-95 Sq.MM)

Supply of LT Bare N.Conn.PG. Clamp 95-25 Sq.mm

Supply of IPC for 120 Sqmm to 120 Sqmm

Supply of MS Clamp with N&B for Suspension Clamp

Supply of MS Clamp for PCC Dead End Clamp with N&B.

Supply of LT Bare N.Conn.PG. Clamp for L-L 95-95 Sq.mm

Supply of Stay Clamp with N&B

Supply of PG Clamp

Supply of Piercing Connector for 120 to 35 Sq.mm

Supply of PRC 70-70/35-35 sqmm to 25 Sq.mm

Supply of SMC Three Phase L.T. Distribution Box with inbuilt panal lock, Al bus bar RYB 25x6mm., Al Busbar N. 40x6mm. for connection of L.T. consumer (Sintex make or other ISI mark reputed company ) with Panel Lock with key)

Supply of MS Half Clamp for Distribution Box.

Please Enable Macros to View BoQ information