NHM- Strengthening of labour room as per LaQshya standard at MCH Alappzha- Electrification and Air Conditioning of Operation Theatre.

Amount

Power Wiring for the installation of Air Conditioner Units

od267749/2022_2023 : Supply and installation of Bottom cabling box TN250D Category No CM90437OCOO of 250A 8 way compliance with latest standard IEC 61439-2 of SMDBs power distribution

od267750/2022_2023 : Supply and installation of metering Extension Box TN 250D Category No. CM9043900PO of 250A 8 way Compliance with latest standard IEC 61439-2 of SMDBs power distribution

od267751/2022_2023 : Supply and installation of corner box TN 2500 Category No CM910890000 of 250A 8 way compliance with latest standard IEC 61439 2 of SMDBs power distribution

od267752/2022_2023 : Supply and installation of side cabling box TN250D Category No. CM910850F00 of 250A 8 way compliance with latest standars IEC 61439-2 of SMDBs power distribution

od267753/2022_2023 : Supply and providing 250A 8 way MCCB load bank sub main distribution board with IP 42 protection complying to IEC 61439-2 with copper bus neutral link earth bus etc suitable for providing 3 pole incoming and outgoing fixed on wall using necessary anchor bolt including cutting hole on the wall, making good the damages colour washing etc as required [L & T Enersys or equivalent]

90.14.10.2 : Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.16 A-100A, 25/35 kA (Ics=100%Icu), 3 pole, current limiting type MCCB having thermal setting range of 80 - 100% with thermal magnetic release having adjustable OL

90.14.10.7 : Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.160A, 35/36 kA (Ics=100%Icu), 3 pole, current limiting type MCCB with microprocessor based release with overload setting of 50 - 100% having adjustable OL & SC

90.12.1.28 : Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil).3.5 core 35 sq mm

9.1.21 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 35 sq. mm (32mm)

90.12.1.31 : Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil).3.5 core 95 sq mm

9.1.24 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 95 sq. mm (45mm)

90.12.1.40 : Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil).4 core 10 sq mm

9.1.32 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 10 sq. mm (25mm)

90.12.1.41 : Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil).4 core 16 sq mm

9.1.33 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm)

90.11.1.10 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required4 way (8+12) - three phase double cover (IP 42/43)

90.11.1.18 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required4 way (8+12) - double cover TPN vertical DB with provision for fixing MCCB as incomer and SP/ TP MCB as outgoing (IP 42/43)

90.11.1.19 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required6 way (8 + 18) - double cover TPN vertical DB with provision for fixing MCCB as incomer and SP/ TP MCB as outgoing (IP 42/43)

2.13.1 : Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.13.2 : Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps

2.13.3 : Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.100 amps

2.15.2 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.15.3 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps

2.10.1 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

od267956/2022_2023 : Supply and fixing 32A, 10KA, TPMCB

od267957/2022_2023 : Supply & fixing of 40A , 10KA, TP MCB

od267958/2022_2023 : Supply and fixing 4 pole Metal Enclosure

1.17.22 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.4 x 4 sq. mm

1.17.31 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.4 x 6 sq. mm

90.16.1.2 : Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.65 mm copper conductor (12 SWG)

90.16.1.3 : Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG)

90.16.5.2 : Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.65 mm (12 SWG)

90.16.5.3 : Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG)

90.14.10.10 : Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.16A -100A, 35/36 kA (Ics=100%Icu), 4 pole, current limiting type MCCB with microprocessor based release with overload setting of 50 - 100% having adjustable OL & SC

90.14.10.12 : Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.160A, 35/36 kA (Ics=100%Icu), 4 pole, current limiting type MCCB with microprocessor based release with overload setting of 50 - 100% having adjustable OL & SC

90.16.3.9 : Supply and clamping the following size of strips on surface of wall/ parapet/ existing cable tray using clamps fabricated from 20 X 3 mm GI flat duly painted or heavy duty GI spacer saddles spacing of clamps not exceeding 1 m, making good the damages, colour washing etc. as required ( for horizontal run)25 x 3 mm copper strip

90.16.4.8 : Supply and clamping the following sizes of strips on surface of wall / parapet/ existing cable tray using clamps fabricated from 20 x3 mm GI flat duly painted or heavy duty GI spacer saddles, spacing of clamps not exceeding 1 m , making good the damages, colour washing etc. as required ( for vertical run).25 x 3 mm copper strip

90.14.7 : Supply and providing copper earth bus in the panel board

PART II= Providing Air Conditioning at Labour room - stage II and new born recitation

od266648/2022_2023 : SITC of following air-cooled DX<br>Condensing Unit consisting of Hermetically<br>Sealed High efficiency Scroll Compressor,<br>Copper refrigerant coil, fan motor,<br>assembled in powder coated metal enclosure<br><br>with HP/LP safety switch, microprocessor-<br>based control unit, protection relays,<br><br>contactors etc, suitable for operation on R-<br>410A gas, complete air-cooled condenser<br><br>with accessories, connection wire, anti-<br>vibration pad etc. if required confirming to<br><br>NABH standards- 8.5 TR OUTDOOR<br>UNITS.Supply and installation of expansion<br>valve and filter drier

od266673/2022_2023 : Supply ,installation ,testing and<br>commissioning. of DX AHU compatible<br>Double skin Air handling unit with thermal<br>break profile with panel thickness of 40 mm<br>with 40 kg density complete with DX coil<br>,Plug fan with VFD ,Fan motor shall be of<br>efficiency grade IE2 , outer skin of 0.6 mm<br>pre-coated GSS and inner skin of 0.6 mm<br>plain GSS ,The Air Handling Unit shall<br>consist of Mixing Box with fresh air intakes<br>with dampers, filter section with10 micron<br>Pre filter( MERV 7), 5 micron fine filter(<br>MERV 14) , Coil section( with 4/6 Row DX<br>cooling coil), strip heater( as per schedule),<br>access door, marine light, EFF1 quality<br>motor with VFD(VFD as per AHU<br>Manufacturer standard), canvas at unit<br>outlet, outlet flange, & vibration isolators.<br>Units shall be Eurovent certified VFD<br>drive motor suitable for 415+-10% volts, 50<br>Hz, 3 Phase AC supply drain connections,<br>stanless steel (18G) drain pan/tray with SS<br>304 with nitrile rubber insulation,<br>Thermostatic Expansion Valve,Drier<br>Strainers, pressure testing of the circuit and<br>victimization of the system and<br>commissioning.if required confirming to NABH standards-3400 CFM with minimum<br>125mm TSP or as required

od266674/2022_2023 : Supply and Installation of Refrigerant<br>piping including supply and installation of<br>insulated 13mm/19mm thick nitrile rubber<br>insulation between the condensing unit and<br>the indoor unit, with 11/8"Hard/Soft drawn<br>copper pipes with brazed joints for both one<br>run supply and one run return lines with<br>coating for weather protection and and<br>finished with necessary supports as per the<br>specifications and drawings. External pipe<br>should be insulated with protection fibre<br>glass cloth with a layer of protective<br>coating.

od266675/2022_2023 : Supply and Installation of Refrigerant<br>piping including supply and installation of<br>insulated 13mm/19mm thick nitrile rubber<br>insulation between the condensing unit and<br>the indoor unit, with 5/8"Hard/Soft drawn<br>copper pipes with brazed joints for both one<br>run supply and one run return lines with<br>coating for weather protection and and<br>finished with necessary supports as per the<br>specifications and drawings. External pipe<br>should be insulated with protection fibre<br>glass cloth with a layer of protective<br>coating.

od266676/2022_2023 : SITC of AHU mounted strip heater of 3<br>KW in three step control with humidistat,<br>safety thermostat, Automatic step controller<br>and all other safety accessories.AHU starter<br>panel.

od266677/2022_2023 : SITC of UV chambers with Control panel<br>suitable for connecting with AHUs.

90.6.5.18 : Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.4 core 1.50 sq mm

90.6.5.20 : Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.4 core 4.00 sq mm

90.6.5.21 : Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.4 core 6.00 sq mm

od266685/2022_2023 : Supply and filling<br>Refrigerant gas charging as per the<br>requirement with R410 A.

od266696/2022_2023 : Supply, installation and testing of<br>fabricated Aluminium ducting complete<br>with flanges in accordance with the<br>approved shop drawings as per SMACNA<br>standards. 20 Gauge (1mm)

od266697/2022_2023 : Supply, installation and testing of<br>fabricated aluminium ducting complete with<br>flanges in accordance with the approved<br>shop drawings as per SMACNA standards.<br>22 Gauge (0.80mm)

od266698/2022_2023 : Supply and fabrication<br>conveyance and installation of Fabricated<br>support for hanging ducts and Plenums

od266699/2022_2023 : Fabrication , of plenum inside duct , fixing<br>of HEPA modules.

od266700/2022_2023 : Supply of HEPA filter with 99.97% down to<br>0.3 microns

od266701/2022_2023 : Supply and fixing of<br>External Thermal insulation on ducts with<br>19mm thick closed cell nitrile rubber class<br>O insulation with Aluminium foil face<br>inclusive of adhesive, tapes etc.

od266703/2022_2023 : Supply, installation,<br>testing and commissioning of sufficient<br>rated control Electrical panel for AHU and<br>DX ODU temperature control with<br>High/Low Voltage overload protecter with<br>microprocessor controls, single phase<br>preventer and suitable MCB's.

od266704/2022_2023 : Supply, installation,<br>testing and commissioning of Drain piping<br>insulated with 19mm thick nitrile rubber<br>insulation of closed cell with protection fibre glass cloth with a layer of protective<br>coating.32mm PVC.

od266705/2022_2023 : Installation ,testing,commissioning of AHU,<br>DX condensing unit Validation of including<br>Airflow velocity test, Filter Integrity test,<br>Particle count test etc. as required, and to<br>provide detailed Test report before handing<br>over after completing all installation of the<br>work.

od266706/2022_2023 : Supply installation of powder coated<br>aluminium return air diffuser without<br>volume control damper

od266707/2022_2023 : Supply installation of powder coated<br>aluminium supply air diffuser with volume<br>control damper

od266708/2022_2023 : Supply, installation, testing and<br><br>commissioning of exhaust blower with fan<br>motor and blade as required 1200 CFM

od266709/2022_2023 : Supply, installation,<br>testing and commissioning of air intake<br>blower with fan motor and blade as required<br>1200 CFM

od266710/2022_2023 : Supply and providing<br>used air outgoing /intake duct with<br>Aluminium cowl and bird screen suitable size as required

od266711/2022_2023 : Supply and installation and commissioning<br>Al made Volume Control damper install at supply duct and return duct

PART III- Modular Operation Theaters

od268304/2022_2023 : SITC of PVC Flooring - Operation Theatre -<br>antistatic as per technical specifications

od268305/2022_2023 : SITC of Control panels for Operation Theatre<br>as per technical specifications

od268306/2022_2023 : SITC of Operating List Board - ceramic as per<br>technical specifications

od268307/2022_2023 : SITC of X-Ray Viewing Screen - LED as per<br>technical specifications

od268308/2022_2023 : SITC of Scrub Station - SS - 2 bay with<br>automatic sensor as per technical specifications

od268309/2022_2023 : SITC of Storage - PPGI as per technical<br>specifications

od268310/2022_2023 : SITC of Door and Frames (Hermetically Sealed<br>Type) – Swing as per technical specifications -<br>2.1 (H) x 1.5 (W)

od268311/2022_2023 : SITC of OT Pendant – Surgeons as per technical<br>specifications

od268312/2022_2023 : SITC of OT Pendant – Anesthesia as per<br>technical specifications

od268313/2022_2023 : SITC of Peripheral Lights & Clean room<br>luminaries as per technical specifications

od268314/2022_2023 : SITC of Distribution Box & Electrical Cabling<br>works from panel as per technical<br>specifications

od269716/2022_2023 : SITC of internal wiring works including switch, sockets, information outlets including cabling works inside individual operation theatre etc.as required

od268316/2022_2023 : Supply and laying of required power & ELV<br>cables from distribution board to individual<br>operation theatre

od268317/2022_2023 : SITC of Pressure Relief Dampers

od268318/2022_2023 : SITC of Laminar Air Flow System with HEPA<br>filter

od268319/2022_2023 : SITC of Internal HVAC Ducting & Exhaust<br>System

od268320/2022_2023 : HV Air conditioning system - AHU, 11 TR<br>(5.5TRx2)Outdoor unit, Humidity Control,<br>complete ducting, power cabling, MCB, etc as<br>per specifications for one theater

od268321/2022_2023 : SITC of Hatch pass box active

od268322/2022_2023 : SITC of OT Light LED - double dome with<br>camera provision

PART IV- SITC OF Ductable AC UNIT IN GYNIC ICU , SEPTIC ICU

od268947/2022_2023 : Supply of 5.5 TR nominal capacity ductable split air conditioner equipped with<br>efficient scroll compressor conforming to IS 1391 (Part2/92) suitable for<br>operating 415+-10% ,50 Hz three phase AC Supply ,fitted with scroll compressor with power consumption norms as specified in the standards operating on R-410A/407A non CFC refrigerant with condensing and evaporating units cable for cooling ,50 dehumidifying ,air circulating and bio filter activated carbon cum electrostatic filter etc including microprocessor control with cordless remote control etc. with all standard fittings, safety devices, like HP/LP cutout single phase preventer, overload relays, microprocessor control with digital display etc ( GYNIC<br>ICU, SEPTIC LABOUR ROOM)[BLUESTAR DSA661R3]

od268961/2022_2023 : Supply of 3 TR nominal capacity ductable split air conditioner equipped with<br>efficient scroll compressor conforming to IS 1391 (Part2/92) suitable for<br>operating 415+-10% ,50 Hz three phase AC Suply ,fitted with scroll compressor with power consumption norms as specified in the standards operating on R410A non CFC refrigerant with condensing and evaporating units cable for cooling 50 dehumidifying ,air circulating and bio filter activated carbon cum electrostatic filter etc including microprocessor control with cordless remote control etc. with all standard fittings,safety devices,like HP/LP cutout single phase preventer,overload relays,microprocessor control with digital display etc ( Septic ICU)[BLUESTAR DSA361R3]<br>

od268966/2022_2023 : Supply and providing hard drawn copper refrigerent piping with nitrile rubber<br>insulation including bracing pressure testing etc. complete for interconnecting<br>condensing unit and evaporating unit 7/8’ 22 guage

od268967/2022_2023 : Supply and providing hard drawn copper refrigerent piping with nitrile rubber<br>insulation including bracing pressure testing etc. complete for interconnecting<br>condensing unit and evaporating unit 5/8" 22 guage

od269679/2022_2023 : Supply and fixing of 32 mm PVC drain pipe insulate with P trap, nitrile rubber<br>insulation and along with all required accessories in surface/recess including<br>cutting the wall and making good the damages etc. as required.

90.6.5.18 : Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.4 core 1.50 sq mm

od269072/2022_2023 : Sheet metal work GSS ducting with all fitting as per design such as tee bends,<br>turning vanes, splitter damper insp. Door suspension and support arrangement<br>for plenum, ducts , etc. ( for supply ducts)<br>(a) 22g GSS ducting in sqm

od269680/2022_2023 : (b)24 g GSS ducting in sqm

od269684/2022_2023 : Supply and fixing of External Thermal insulation on ducts with 13 mm thick ,35<br>kg/m3 density ,regular closed cell o class nitrile rubber insulation using self<br>adhesive Aluminium foil as per specifications.Quoted price shall be inclusive of<br>adhesive ,tapes ,CPRX Compound etc ( Insu Shield

od269685/2022_2023 : Supply and fix acoustic duct lining with 15 mm .thick closed cell nitrile rubber<br>insulation with a density of 60kg/m3

od269733/2022_2023 : Supply and fix grills/diffusers our of extruded aluminum construction with powder<br>coated finish

od269734/2022_2023 : (a)Linear air grilles or diffuser with Collar Damper

od269735/2022_2023 : Supply and filling refrigerent gas R410A as required

od269736/2022_2023 : Installation testing Commissioning of the air conditioning unit after necessary<br>leak test vacumizing and charging the system by using R-410A refrigerant gas<br>and finally air and temperature balancing

od269737/2022_2023 : Supports required for mounting the outdoor unit (fabricate the angle 50mm x<br>50mm angular size 6mm thickness with anchor bolt and nut bolt) with fixing<br>charge

od269738/2022_2023 : Fabrication and supply and installation of 75 mm X 40mm square tube<br>supporting AHU and DUCT

90.6.5.20 : Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.4 core 4.00 sq mm

od269686/2022_2023 : Supply and installation of fire retardant Canvas Connection

od269687/2022_2023 : Supply and Installation of Isowall panelling with 40mm thick 16 kg density<br>expanded polystymer side covered with 6mm thick pre painted GI sheet with<br>inspection opening for cleaning air filters servic openings with provisions for<br>canvas connections complete.

od269688/2022_2023 : Fresh air cowl with bird screen

Cool Palace Hoome Appliances

Bidder Name

PIONEER COOLTECH

Cool Palace Hoome Appliances