Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹12.8 Laccepted-aoc | ₹12.8 L | accepted-aoc |
Tender Value
₹12.8 L
EMD Value
₹12,800
Closing Date
26 Jun 2026, 4:00 pmClosed
EE OFFICE - PRODDATUR
TECHNICAL OFFICE O.O EXECUTIVE ENGINEER R and B DIVISION PRODDATUR
Construction of CC Helipad in view of Honble Chief Minister of AP at JSW Steel Plant in Sunnapurallapalli Village Jammalamadugu Mandal in YSR district on 03.07.2026
950300
23/TO/2026-2027
OPEN - NCB
Road Work
YSR
3 documents required · 3 mandatory
₹453
₹12,800
11 Jul 2026
23 Jun 2026
23 Jun 2026
Clearing of Juliflora (Prosafies) jungle including uprooting and removing for juliflora stumps using JCB as directed by the departmental officers during execution of work
Earthwork excavation and removal of unserviceable soils upto SDR including excavation, loading and disposal upto 1000 mts etc., complete for finished item of work as per MoRT&H specification 301(5th Revision) and as directed by the Engineer-in-Charge
Providing, Laying, Spreading and compacting graded HBD crushed stone aggregate to Wet Mix macadem specification ( 5th Revision) as per Table 400-13, including cost of all materials and including premixing the material with water at OMC in Mechanical mix plant carriage of mixed material by tipper to site , laying in uniform layers with paver in base courses on well prepared surface and compacting with Vibratory roller to acheive the desired density etc., as directed by the Engineer-in-Charge and as per MoRT&H specification.406 (5th revision) for finished item of work.
Supplying and laying of seperation membrane 125 micron and as per ISI standard specification duly fixing over CC(1:4:8) including cost, conveyance of all materials etc., complete and as directed by the Engineer-in-Charge during execution of work.
Vibrated cement concrete M 35 grade using 20mm & 10mm HBD crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including all other incidental and operational charges of all T&P etc., complete for finished item of work as per MoRT&H specification 1500, 1700, 2100 & 2702 (5th Revision) and as directed by the Engineer-in-Charge for C.C Pavement.
Forming embankment with Side earth by mechanical means upto SDR including pre-watering of soil , removal of top soil, excavation of soils , depositing the soils on the embankment, spreading soil, breaking clods, sectioning , grading and consolidation with 8 to 10 Tonnes Vibratory Road Roller @ OMC to meet requirement of table 300-2 of MoRT&H, including all hire and operational charges of T&P, complete for finished item of work as per MoRT&H specification 305 (5th revision)
Supplying of hot applied thermoplatsic road marking compound, 2.5mm thick including reflectorising glass beads @ 250 gms with Reflectorising glass beads on Bituminous surface at 250 gms per sqm area thickness of 2.5mm is exclusive of surface applied glass bead as per IRC 35 the materials should be of BERGER Company/BERGER Equivalent and must comply with the following: (A) White index for the product should be in the range of 60-70 when measured against standard refernce. The applied panel 7/8 number must be submitted for checking up the white index in the department lab. In Case the department approves the white index of any vendor, the department engineer may carryout random checking of the applied products at site against the approved panel. In case of any major deviation, beyond acceptance limit, department reserve the rigid to cancel or reject the total supplied consignment of the said material as per approved panel at his own cost and additional demurrages may be claimed due to loss of man days (as per the rules of the department). (B) Luminance factor of the material should be in the range of 80 - 85% at 45 degree centigrade as per ASSTHOM 4249. (C) Crack resistance: The applied panel cured for 7 days under ambient condition and then should be tested as per BS3262, Part-1, 1989 and should pass at the range of '0' degree centigrade to '-10' degree centigrade (D) Adhesion: Strong (E) Softoning point: 102 degree centigrade (F) Dired film finish:Smooth and uniform (G) Night vision: High as directed by the Engineer - In - Charge and conforming to IS:164-1961(1st revision reaffirmed in 1986) and clause conforming to IRC 35-1997.
Hire Charges of Dozer for leveling the ground etc., complete as directed by the departmental officers during execution of work
Labour Charges for Levelling, Sectioning and picking the field picked metal at site for Meeting area with manually man or woman mazdoors as directed by the departmental officers during execution of work
Water tanker for watering the field area at site helipad area as directed by the departmental officers during execution of work
Providing Cow dung plastering 6mm thick in two coats including cost and conveyance of cow dung and plastering neatly including all labour chages etc., complete as directed by the departmental officers during execution of work
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
BOQ_23.xlsx
TENDER_DOCUMENT • 0.01 MB
DTS_23.docx
TENDER_DOCUMENT • 0.16 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .