Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.2 LAccepted-AOC | ₹7.2 L | L1 | Accepted-AOC L1 accepted |
| 2 | L2₹7.5 LRejected-AOC ORAMADATHIL VADAYAMPADY P O ERNAKULAM | THRISSUR | KERALA | 680667 | ₹7.5 L | L2 | Rejected-AOC L2 rejected |
| Sl No | Description | Qty | Unit | SHALJU VARGHESE KATTUPARAMBIL L1 | Amils John L2 |
|---|---|---|---|---|---|
| 1.00Estimate | |||||
| 1.00 | 21.2.2:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides | 64.7 | sqm | 1,000 ₹64,700 | 1,070.99 ₹69,293.05 |
| 1.00 | 21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) | 656.4 | kg | 538 ₹3.5 L | 525.07 ₹3.4 L |
| 1.00 | 21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) | 64.7 | sqm | 1,075 ₹69,552.50 | 1,148.38 ₹74,300.19 |
| 1.00 | 21.17:Providing and fixing anodised aluminium grill ( anodised transparent or dyed to required shade according to IS : 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge.(Only weight of grill to be measured for payment ). | 10.08 | kg | 700 ₹7,056 | 631.56 ₹6,366.12 |
| 1.00 | 15.57:Dismantling aluminium / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 metres lead as directed by Engineer - in-Charge | 74.4 | sqm | 50 ₹3,720 | 52.38 ₹3,897.07 |
| 1.01 | OD163705/2024-2025:Engaging coolie for various works as per the direction of departmental officers at site | 20 | no | 950 ₹19,000 | 971.79 ₹19,435.80 |
| 1.01 | OD163706/2024-2025:Engaging carpenter for various works as per the direction of departmental officers at site | 20 | no | 1,000 ₹20,000 | 1,075.75 ₹21,515 |
| 1.01 | OD92810/2025-2026:Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. | 412.08 | sqm | 15 ₹6,181.20 | 18.39 ₹7,578.15 |
| 1.01 | 13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer | 412.08 | sqm | 50 ₹20,604 | 72.6 ₹29,917.01 |
Tender Value
₹8.3 L
EMD Value
₹20,825
Closing Date
25 Feb 2026, 3:00 pmClosed
AEE
Assistant Executive Engineer Buildings Sub Divn Ekm
Provision included in this estimate are aluminum partition and doors with powder coated aluminum ,aluminum grill,particle board and glass, door closer, resetting existing partition,venetian blinds ,scraping , priming coat, painting
2026_PWD_838072_1
85/AEE/BL/EKM/2025-26
Open Tender
Civil Works - Buildings
180 days
Ernakulam
Prefer Tender Documents
7 documents required · 7 mandatory
₹1,840
Yes
₹20,825
Yes
13 Mar 2026
19 Feb 2026
27 Feb 2026
19 Feb 2026
25 Feb 2026
19 Feb 2026
Estimate
21.2.2:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides
21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)
21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)
21.17:Providing and fixing anodised aluminium grill ( anodised transparent or dyed to required shade according to IS : 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge.(Only weight of grill to be measured for payment ).
15.57:Dismantling aluminium / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 metres lead as directed by Engineer - in-Charge
OD163705/2024-2025:Engaging coolie for various works as per the direction of departmental officers at site
OD163706/2024-2025:Engaging carpenter for various works as per the direction of departmental officers at site
OD92810/2025-2026:Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer
13.82.2:Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture including applying additional coats wherever required, to achieve even shade and colour.Two coats
OD92870/2025-2026:Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work
OD163708/2024-2025:Dismantling and resetting partition with powder coated aluminium partition by changing aluminium clip, beeding, angles etc including labourcharges for dismantling fabrication etc complete
9.84:Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width form 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
OD163714/2024-2025:Acid washing the flooring using mild HCL acid for cleaning the floor, including cost of acid, labour charges etc, complete
OD164548/2024-2025:Supplying and fixing Venetian blinds partially transparent to adjust open and closing including cost of all materials, labour charges etc complete
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1411644.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.05 MB
BOQ_1411644.xls
BOQ • 0.24 MB
viewsbd.pdf
Tender Documents • 1.64 MB
Download all tender documents and submit your bid