8332 REPAIR / MAINTENANCE OF CHLORINE DOSING PUMPS, CI/GI PIPE LINES AND REPAIR TO SUBMERSIBLE PUMPING SETS, SEWAGE PUMPING SETS ETC AND IMPROVEMENT TO WATER SUPPLY INSTALLATION AND ALLIED WORKS AT RTS AND DEPOT HEMPUR UNDER GE (E) BAREILLY.

Amount

Excavation in trenches in soft & loose soil not exceeding 1.5 metre deep and not exceeding 1.5 mtr width and getting out soil including forming bottom surface to required slope / gradient for laying cables/pipes etc. including removing cable protection PCC covers/ bricks & stacking serviceable covers / bricks for reuse and disposal of unserviceable covers within 50 m complete all as specified and directed. Note : Excavation shall be made carefully in order to avoid damage of existing cables and protection covers.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed

Removing of surplus soil to a distance not exceeding 50 Mtrs and depositing where directed at a level not exceeding 1.5 Mtr above the starting point complete all as specified.

Dismantling and taking up or down unserviceable / cracked steel tubing with all fittings including separting the serviceable tubes cleaning the same and Re-laying, jointing old steel tubing and connections in new or old position including new fittings such as bends, elbows, union, tees, reducers etc; as required at site laid in trenches or on floors complete all as specified and as directed of the following sizes :- Note :- Excavation and other earth work will measured and paid separtely for steel tubes / pipes laid in trench

(a) Bore of pipe 100 mm

(b) Bore of pipe 80 mm

(c) Bore of pipe 50 mm

(d) Bore of pipe 40 mm

(e) Bore of pipe 25 mm

(f) Bore of pipe 20 mm

(g) Bore of pipe 15 mm

Supply, Laying, jointing and leakage testing GI Pipe medium grade including all fittings such as bend, tee, elbow, union, reducer etc, laid in trenches and including dismantling and taking down unserviceable / cracked steel tubing with all fittings of the following sizes as complete all as specified and as directed :- Note :- Excavation and other earth work will measured and paid separtely for steel tubes / pipes laid in trench. directed at site of the following sizes :-

(a) Bore of pipe 100 mm

(b) Bore of pipe 80 mm

(c) Bore of pipe 50 mm

(d) Bore of pipe 40 mm

(e) Bore of pipe 25 mm

(f) Bore of pipe 20 mm

(g) Bore of pipe 15 mm

S&F Gun-metal, globe or Gate Valve with iron wheel head, screwed bothe ends for iron pipe, ISI marked including taking down of unserviceabel existing gate valve complete all as specified and directed of the following sizes:-

(a) 50mm dia

(b) 40mm dia

(c) 25mm dia

(d) 20mm dia

(e) 15mm dia

S&F sluice valve class PN-1.6 heavy duty flanged ends drilled ISI marked confirming to IS: 14846 suitable for folowing bore pipe, wheel operated (Handle) with high tensile stainless steel spindle, including nuts, bolts and jointing with jointing materials etc. including taking out old existing unservicable sluice valve including making arrangement for safe working complete all as specified and directed. Make: BIR, KIRLOSKAR, Kartar

(a) 100 mm bore

(b) 80 mm bore

S&F CI Non Return Sluice Valve flanged ends of class 1.6 PN, size 100mm bore including taking down old existing unserviceable Non Return Valve complete all as specified and directed.

M&L for repairs to leaking joints for cast iron, spigot and socket pipes and fittings, of following sizes of bore in water mains, by burning out old lead joints in position including provision of run lead and including necessary excavation and earht work complete all as specified and directed.

(a) Bore of pipe 150 mm

(b) Bore of pipe 100 mm

(c) Bore of pipe 80 mm

M&L for tapping from existing 150/100/80mm bore CI water mains by drilling for 15/20mm dia furrel and connection with 40/50mm bore extension line complete all as specified and directed.

Supply and laying in trenches of CI Pipe centrifugally cast spigot & socketed end of size 150mm dia including taking up existing cast iron water mains including all fittings with spigot & socket ends and lead Joints including burning out joints and recovering lead complete all as specified and directed.

All as per Srl Item No.11 here in before but size 100mm dia

All as per Srl Item No.11 here in before but size 80mm dia

S&F and lowering 80 mm bore MS, column pipe, both end flanged, 3.00 metre long fitted with flanges at both ends made out of heavy grade pipes of 5.4 mm wall thickness ISI marked with bolts, nuts, gaskets etc. complete all as specified and directed.

S&F for cast iron fittings such as bends, tapers, Tee pieces, Y junction, cross collar, caps and plugs etc of any type as required for bore of pipe up to150 mm dia complete all as specified and directed.

Disconnecting from electric connection carefully the motor from panel board and lifting the submersible pump and motor from bore well including all etc and removing the same to the location (inside / outside building) complete all as directed.

Dismantling the submersible pump assembly capacity 15 HP completely, checking and segregating serviceable / unserviceable parts, cleaning serviceable parts thoroughly by approved method, replacement of wron out parts including necessary lath / machinery work including all new parts as reqd, re-assembling the pump completely lowering the pump alongwith all accessories to the existing location, overhauling, commissioning, testing and connecting up complete including painting all as specified and directed.

Supply and Replacement of following pairs suitable for srl item No 17 for Submersible pump:-

(a) Discharge outlet

(b) Stage casing

(c) Pump shaft

(d) Key for impeller

(e) Key for pump coupling

(f) Bearing sleeve

(g) Stage Bowl bush

(h) DOL Bush

(j) Nut Stud kit

Dismantling, cutting and removing the burnt windings from the submersible motor of capacity 15 HP, rewinding with suitable size / gauge of super enameled / copper conductor and other approved insulating materials, heating, drying and replacement of existing size of submersible cable including varnishing, overhauling, reassembling the motor, installing, commissioning, testing and connecting up complete all as specified and directed.

Supply only of following parts suitable for ser item No 19 for Submersible motor :-

(a) Oil Seal Set

(b) `O` ring set

(c) Motor bearing Bush set

(d) Complete Pad set (Bearing assembly)

(e) Rotor sleeve set

(f) Thrust plate with ferredo lining

(g) Upper/Lower bearing house

(h) Balancing ring

Disconnections of electric connection of centrifugal pump and motor capacity of 25 HP, lifting and removing motor form its existing foundation to the location (in side/outside of building) where directed by the Engr-in-charge. Dismantling the pump and motor of capacity 25 HP, carefully checking, segregating serviceable and unserviceable parts, cleaning the serviceable parts thoroughly by approved method (Pats like stator, rotor, terminal box, bearings shaft, key etc) heating, drying & varnishing including replacement of burnt winding for 25 HP motor with super enameled copper wire of existing gauge and good quality of insulating materials including replacement of unserviceable parts as required including necessary lath / machining work. Reassembling the pump and motor including painting with two coats of synthetic enamel paint after necessary surface preparation, marking of number (SM, MES or srl No) installing to its existing foundation, commissioning, connecting up and testing complete as directed. Note:- Spares shall be measurded and paid separately under respective item of this sch.

Supply only of following parts suitable for ser item No 21 for centrifugal pump and motor.

(a) 25 HP Pump Bearing No 6310 or suitable size

(b) Pump bearing seat suitable for 3 ph 25 HP motor

(c) Motor side cover suitable for 3 ph 25 HP motor

(d) Motor connected plate six hole suitable for 3 ph 25 HP motor

(e) 25 HP Motor Bearing No 6308 or suitable size

(f) 25 HP Motor Bearing No 6309 or suitable size

M&L for Dismantling the Sewage pump set up to 5 HP, carefully checking, segregating serviceable and unserviceable parts, cleaning the serviceable parts thoroughly & including replacement of unserviceable parts as required (Block piston, Nozzle, head block, cupling engine parts & Impaller, gland packing, Pump shaft, pump seal Pump parts) including necessary lath / machining work. Reassembling the pump and engine parts including painting with two coats of synthetic enamel paint after necessary surface preparation, marking of number (SM, MES or srl No) & replacement of unserviceable suction & Delivery PVC pipe, flange, clamps, foot valve etc and testing complete as directed.

Supply and fix Fully Automatic Star Delta Starter with Single Phase Preventer, 3 phase 415V 50 Hz suibtable for 15 HP Submersible Pump and Motor complete with Over load tripping circuit (Max relay (14-30 Amp), Reverse phasing, unbalancing, Low voltage, high voltage upto motor terminal and starting time delay and should be housed in Dust proof, Moisture proof and powder coated sheet metal fabricated box with locking arrengement with extra long life contact with arrengement and making necessery connection in panel and pump set including taking down of existing starter complete all as specified and directed.

Supply and fix Fully Automatic Star Delta Starter with Single Phase Preventer, 3 phase 415V 50 Hz suibtable upto 40 HP Centrifugal Pump and Motor complete with Over load tripping circuit (Max relay (20-40 Amp), Reverse phasing, unbalancing, Low voltage, high voltage upto motor terminal and starting time delay and should be housed in Dust proof, Moisture proof and powder coated sheet metal fabricated box with locking arrengement with extra long life contact with arrengement and making necessery connection in panel and pump set including taking down of existing starter complete all as specified and directed.

Supply and fix DOL starter three phase 415 volt 50 Hz push button type suitable for 05/7.5 HP centrifugal pump set with arrangement and making the necessary connection in panel and pump set including taking down of existing starter complete all as specified and directed. Make- L&T or equivelent as approved by GE

Taking down UNSV Motor Protection Relay and Supply & replacement of Electronic Motor Protection Relay with in-built earth fault protection (Model No MPR300) suitable for 15/25/35 HP submersible pumping set motor complete all as specified and directed. Make-L&T/Minilec/Havells or equivelent as approved by GE

Taking down UNSV Overload protection relay and Supply & replacement of overload protection relay for FASD starter ranging 28-42/30-35 Amp complete all as specified and directed. Make-L&T/Havells or equivelent as approved by GE

Supply and fix of contactor for Starter MNX 32 including suitable Front Add-on aux. contact Block complete all as specified and as directed. Make : L&T/Havells or equivelent as approved by GE

Supply and fix of Electronic Timers Type ST 100, 240/415 V, 50 Hz of range 03-30 secs, complete all as specified and directed. Make : L&T or equivelent as approved by GE

Supply, installation, testing and commissing of gnanular chlorination dosing pump (Model 96 NGQ 51), high pressure single head gear motored adjustable dosing pump having output og 2 U.S. GPD to 40 U.S. GPD and adjustable high pressure of upto 100 PSI (7 Kg/Cm)2 with accessories including lead, tubing, connection nuts, injection check valve, clay weight and ferrules and 100 litres FRP tank with lid and level gauge alongwith agitator and shaft & blade in plastic mounted on tank. The agitator motor must be voltage input 230 V, single phase, 50 Hz, 900 rpm for suitable capacity including provision of connection for suitable pipe line and fittings from dozing pump to Submersible pump and taking down of old existing dozing pump, pipe line and fittings. The accessories in the dosing system must consist of the following : - (a) Preparation tanks (300 Litres) (i) Water inlet line (ii) Outlet with strainer, (iii) Drain Valve (iv) Overflow (v) Conical bottom for sludge disposal (vi) Port whole with cover (vii) Level gauge (viii) Agitator, 120 watts, 900 rmp, single phase flange mounted motor with plastic shaft & impeller. (b) Service tank (100 Litres) (i) Water inlet , (ii) Dosing Pump mounting provision on lid/wall. (iii) Drain (iv) Overflow (v) Level Gauge (vi) Inspection Port.

M&L for cleaning of under ground sump of capacity 10000 Glns at RTS & Depot complete with:- (a) Cleaning of water tanks with high pressure water jet with pressure not exeeding 28Kg/Sqcm and remove all masses algae and dirt. (b) Removal of dirty water alongwith sludge using sludge machines and disposal of the same to a safe distance. (c) Scrubbing of floors using industrial vacuum cleaner. (d) Applying of anti bacterial sterilization to walls floors and roofs of tanks. (e) Removing of all vegitation near by to UG tank and thrown to 50 meters away.

M&L for cleaning of over head Reservoir of capacity 10000 Glns of height up to 21mtr complete with :- (a) Cleaning of water tanks with high pressure water jet with pressure not exeeding 28Kg/Sqcm and remove all masses algae and dirt. (b) Removal of dirty water alongwith sludge using sludge machines and disposal of the same to a safe distance. (c) Scrubbing of floors using industrial vacuum cleaner. (d) Applying of anti bacterial sterilization to walls floors of sump. (e) Removing of all vegitation near by to OH tank and thrown to 50 meters away.

All as per item No 33 here-in-before but over head reservoirs of capacity 25000 Glns at RTS & Depot.

M&L for applying one coat of olive and black paint over a coat of red oxide primer externally of MS/GI/CI pipe line for pump & motor and over head tank with arrow mark for up or down of size 100 / 150 mm dia of bore including scraping existing treatment complete all as specifed and as directed.

M & L in repairs Earth continuity of GI strip of size 32x6 mm laid in trenches/ fixed to walls with saddles and fixing screws etc from earth pit to test point all as specified and directed.

M & L in repairs Air termination, single pointed aluminium rod 12 mm dia and 300 mm long and taking down the unserviceable/ broken one and remove from site complete all as specified and directed.

M & L in repairs test point terminal block made of Gun metal or Phosphorus bronze of size 75x25x10 mm drilled and screwed including 3 Nos, 8 mm dia, 25 mm long hexa headed screwed including taking down unserviceable one and remove from site complete all as specified and directed.

M & L for refixing of existing GI strip to walls/ Pillars etc with suitable saddles, porclain insulators & screws in proper ways complete.

M & L in repairs single LED Aviation Obstruction light fitting upto 9Watt, Red aluminium body complete all as specified.

Taking down copper / aluminum point wiring complete including fixture and fitting such as switches, ceiling roses, pendants, regulators, sockets, light fittings, holders etc and ceiling/exhaust fan and disconnecting, removing the items from site to store for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces to match with the existing surfaces of walls, floors etc complete all as specified and directed.

Fixing only old serviceable light fittings any type received from item No-41 above including electric connection & cleaning complete all as specified and directed.

Fixing only old serviceable LED Tube light fittings 18/20 Watt, 4' complete received from item No.-41 above including cleaning & connecting up with 3 core flexible copper conductor cable of suitable size.

M & L for point wiring for modular fittings using 1.50 sqmm size, PVC insulated, unsheathed 1100 volts grade single core multi-stranded (FRLS) copper conductor cable in proper colour coding drawn into and including non metallic rigid PVC conduit medium grade (not less than 20 mm dia) with metal flush box for mounting of modular fitting and cover plate (metal box, inner and outer plates with cover etc shall be measured and paid seperately under respective items) including one continuous run of PVC insulated (green colour) 1.50 sqmm size stranded FRLS copper conductor cable as in earth wire and connecting all metal parts to common earth dolly incl cutting and chases pinning in for concealed conduit wiring and making good of disturbed surface complete all as specified and directed for

(a) One light point / fan point / bell push point controlled by one modular switch 6 Amp.

(b) One 3 pin 6 amp modular socket out let point controlled by one switch on the same board.

(c) One 3 pin 6 amps modular socket out let point on independent board

M & L power point wiring for modular fittings of copper cable FRLS grade,multi stranded 2.5 Sqmm size for one 5 pin modular socket outlet 15 Amps on independent board with 2.5 Sqmm size of copper cable FRLS grade,multi stranded earth conductor cable in proper colour coding drawn into and including non metallic rigid PVC conduit medium grade (not less than 20 mm dia) with metal flush box for mounting of modular fitting and cover plate (metal box, inner and outer plates with cover etc shall be measured and paid seperately under respective items) including one continuous run of PVC insulated (green colour) 2.50 sqmm size stranded FRLS copper conductor cable as in earth wire and connecting all metal parts to common earth dolly incl cutting and chases pinning in for concealed conduit wiring and making good of disturbed surface complete all as specified and directed.

S&F modular switch, one way 6 Amps, one module of suitable colour complete all as specified and directed. Make-Havells/ Anchor

S&F modular switch, one way 16 Amps, one module of suitable colour complete all as specified and directed.

S&F modular socket , 6 Amps, 2/3 pin combined, 2 module complete all as specified and directed.

S & F modular socket, 6 Amps / 16 Amps, 2/3 pin combined, 2 module of suitable colour complete all as specified and directed.

M & L for point wiring using 1.50 sqmm size, PVC insulated, unsheathed 1100 volts grade single core multi-stranded (FRLS) copper conductor cable in proper colour coding drawn into and including non metallic rigid PVC conduit medium grade (not less than 20 mm dia) with metal flush box for mounting of fittings & fixtures and including one continuous run of PVC insulated (green colour) 1.50 sqmm size stranded FRLS copper conductor cable as in earth wire and connecting all metal parts to common earth dolly for surface conduit/ PVC Casing & Caping wiring and making good of disturbed surface complete all as specified and directed

(a) One light point / fan point / bell push point controlled by one switch 5 Amp

(b) One 3 pin 5 amp socket out let point controlled by one switch on the same board.

(c) One 3 pin 6 amps modular socket out let point on independent board

M & L power point wiring for copper cable FRLS grade,multi stranded 2.5 Sqmm size for one 5 pin socket outlet 15 Amps on independent board with 2.5 Sqmm size of copper cable FRLS grade,multi stranded earth conductor cable in proper colour coding for surface non metallic rigid PVC conduit / PVC Casing & Caping medium grade (not less than 20 mm dia) with metal flush box and including one continuous run of PVC insulated (green colour) 2.50 sqmm size stranded FRLS copper conductor cable as in earth wire and connecting all metal parts to common earth dolly and making good of disturbed surface complete all as specified and directed.

S&F switch, one way 5Amps, coloured complete all as specified and directed.

S&F switch, one way 15 Amps, coloured complete all as specified and directed.

S&F socket, 5 Amps, 2/3 pin combined, coloured complete all as specified and directed.

S & F socket, 5 Amps/ 15Amps, 2/3 pin combined, coloured complete all as specified and directed.

S&F Lamp Holder, PVC / Polycarbonate type with back plate for batten fitting including Lamp LED,aluminium heat sink powder coated white with PC diffuser & B22 base Cap 9 watt, 240 Volts complete all as specified and directed.

S&F ceiling rose, 3 terminals, PVC polycarbonate isolated body complete all as specified and as directed.

Dismantiling the ceiling fan received from Item No-48 and examine complete part thoroughly, oiling, greasing all parts and complete overhauling of fan including replacement of spares & accessories, rewinding, reassembling, making fully functional & Hanging the ceiling fans after cleaning, painting and writing MES No with existing colour synthetic enamel paint, 2.0 cm high letters including electric connection with suitable electric cable complete all as specified.

Dismantiling the Exhaust fan received from Item No-41 and examine complete part thoroughly, oiling, greasing all parts and complete overhauling of Exhaust Fan including replacement of spares & accessories, rewinding and reassembling making fully functional & Fixing the exhaust fans after cleaning, painting and writing MES No with existing colour synthetic enamel paint, 2.0 cm high letters including electric connection with three core 1.0 sqmm PVC electric cable with stranded copper conductor complete all as specified.

S&F in repairs stepped, (socket/switch type) electronic fan regulator flush type, 180 Watt, 240 Volts complete all as specified and as directed.

S&F modular fan Step regulator 120 watt, 230 Volts, 2 module of suitable colour complete all as specified and directed.

S & F in repairs LED Tube light fittings 18/20 Watt, 4', T-8 complete with retrofit tube including connecting up with 3 core flexible copper conductor cable of suitable size complete all as specified and as directed.

S & F in repairs LED Mirror fittings, tube light type, 9/10 Watt, 2', T-8 complete with retrofit tube including connecting up with 3 core flexible copper conductor cable of suitable size complete all as specified and as directed.

S&F in repairs LED bulk head luminaire 12 watt with Engineering plastic housing and oval shaped clear prismatic diffuser, heat sink integrated including one no. 12 Watt LED lamp as directed.

S & F in repairs LED Ceiling light 18Watt surface mounted, round / 1'x1' die cast aluminium housing with frosted diffuser including LED lamp 18 Watt complete all as specified and as directed.

S&F in repairs LED Ceiling light surface/ Recces mounted, 2'x2' die cast aluminium housing with frosted diffuser including LED lamp 36 Watt complete all as specified and as directed.

S&F in repairs LED Bldg security light 25Watt, IP-65 complete and including suitable electric connection with flexible 1.0 sqmm PVC insulated copper conductor cable 1100 V grade complete all as specified and as directed.

Supply & Fix in repairs Digital type ampere meter of size 96x96mm with CT 100/5 Amp, AC, 3 phase, 415 volts complete all as specified & directed.

Supply & Fix in repairs Digital type voltmeter of size 96x96mm AC, 3P, 415 volts complete all as specified and directed.

M & L in repairs sub main wiring with 2 run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm alongwith one run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm as earth continuity conductor in & including PVC Casing & caping all as directed.

M & L in repairs sub main wiring with 2 run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm alongwith one run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm as earth continuity conductor drawn in existing conduit all as directed.

S&F in repairs sheet metal enclousers (DBS) when MCBs to be used 4 way, 415 Volts double door Three Phase & neutral with 200 Amps rated bus bar complete all as specified and as directed.

S&F in repairs sheet metal enclousers (DBS) when MCBs to be used 4 way, 240 Volts double door single pole & neutral with 200 Amps rated bus bar complete all as specified and as directed.

S&F in repairs sheet metal enclousers (DBS) when MCBs to be used 8 way, 240 Volt, double door single pole & neutral with 200 Amps rated bus bar complete all as specified and as directed.

S&F Isolator three phase and neutral, four pole 32A-100A, 415Volt complete all as specified and directed.

S&F MCB single phase and neutral 16A-32A, 230V 10KA. B' curve type complete all as specified and directed.

S&F MCB SP 6A-32A, 230V. 10KA. B' curve type complete all as specified and directed

Supply and laying in repairs XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade ISI marked as per IS 7098-I laid in trenches ducts or fixing or passing through GI pipe across the road/path/drains/along wall/floor/pole/equipment etc. cross sectional area including cable lugs of following size including taking down of existing cable complete all as specified and directed.

(a) LT cable 2 Core 10 Sqmm

(b) LT cable 4 core 35 Sqmm

(c) LT cable 3.5 core 95Sqmm

Supplying & Laying Sub Class `B’ bricks old size with axis of the bricks perpendicular to the axis of the cable as in cable protection all as specified and directed

Supply and laying new dry river sand laid in trenches 8.0cm below the cable and 15.0cm above the cable and gently punned to 18.0cm as cable cushioning and covering complete all as specified and directed. (Note:- Only punned 18 CM thick sand cushioning shall be measured and paid)

M&L for Cutting/Boring of road/Hard standing to a size of 30 cm in width and not exceeding 60 cm in depth for laying of protection pipe/water line/Cable including returning filling, Including spreading and providing PCC in 1:2:4 B1 using 20 mm grade stone aggregate for the top 100mm layer, complete all as specified and directed.

Supply and laying galvanised iron pipe 50mm bore light grade fixed to poles with steel clamps laid under road crossing, fixed to wall etc complete all as specified and directed.

Collection of water sample from the Bore Well for testing of Physical, Bacteriological and Chemical analysis of portability for drinking purpose from Govt/Authorised lab complete all as specified and as directed.

M & L for cleaning away all Grass, vegetation, saplings, shurbs, brushedwood, undergrowth, un-wanted plants, roots and removing the rubbish up to distance of 50 Mtrs outside the periphery of the area under clearance all as specified and as directed.

Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6 mm thick buried directly in ground (Earth pit not less than 2.25 Mtr deep below normal ground level ) with top edge of the plate not less than 1.5 Mtr below normal ground level connecting with GI earthstrip 32x6 mm dia by means of bolt nut check nuts and washers of galvanized iron and provision of GI tubing light gra de (ISI marked) of 40 mm bore for protection of earthstrip of 32x6 mm including PCC with 1:2:4 type B1 using 20mm graded crushed stone aggregate CI frame and cover of angle iron 40x40x6mm and handle 6mm dia MS bar made to shape GI light grade20mm bore pipe for watering perforated at bottom 1.75 metre long placed on top edge of earth plate, charcoal and common salt filling, test point made out of Bronze/Gun metal with fixing arrangment , funnel, wire mesh and earth work in soft/loose soil, returning filling in and removal of surplus soil to a distance not exceeding 50 Metres , all as per electrical plate No 3 of SSR 2009 Pt -I to earth test point all as specified or indicated including testing on completion. NOTE :- The quoted rate of earthing shall be deemed to included cost of 7.5 m long galvanised wire 32x6 mm dia and protection pipe of 40 mm bore medium grade(ISI marked) any veriation in length shall be adjusted through deviation order based on SSR rates adjusted with quoted rates.

All as per Srl item No. 85 here in before but 4.0 mm GI wire as earthing lead with 15 mm dia light grade

Dismantling the exisiting damaged valve pit and construction of Valve pit of size 110cm x110cm x 90cm (internal dimensions), brick construction, including all necessary excavation and earth work in hard/loose soil, returning , filling in disposal of surplus spoil to distance not exceeding 50m and depositing where directed, PCC in foundation of the mix 1:4:8, type D-2, (Using 40mm graded crushed aggregate) brick masonry in cement mortar 1:4, rendering 12mm thick in cement mortar 1:4, internally, finished even and fair and pointing flush externally as the work proceeds in the same mortar mild steel frame, MS sheet cover 3.15 mm thick with handle and locking arrangement, painting all the exposed M.S work with two coats of synthetic enamel paint of the tint over a coat of red oxide primer and painting all the M.S embedded in PCC with two coats of black bituminous paint complete all as specified and directed.

Supply only ALTOCH (Calcium based granular disinfectant)

Supply only Chlorine tablets contained in plastic cylindrical sealed disposable sanitizer refill for disinfection of drinking water with arrangement for controlled release of disinfectant in water.

Supply only Bleaching Powder confirming to IS-1065 in air tight polythene bags of 25 Kg capacity complete all as specified and as directed.

Supply only flat type 6 Sqmm three core, PVC sheathed copper conductor cable suitable for submersible pump and motor complete all as specified and as directed.

Supply only Ampare tape high intensity reflective, yellow, 50mm width, 50 mtr in length complete all as specified and as directed.

Supply only Nut bolts with washers complete off sizes.

Supply only Rechargeable Torch 75W Flash light extra long Beam Range with aluminium body, super Bright LED light complete all as specified and as directed.

Supply only water chlorine test Kit complete all as specified and as directed.

Supply ony Spun & jute complete all as specified and as directed.

Supply only testing regent Tolbine of 100 ml bottle for water chlorine test complete all as specified and as directed.

Supply ony Pipe wrench 250 mm confirming to IS-4003 complete all as specified and as directed.

Supply ony Pipe wrench 450 mm confirming to IS-4003 complete all as specified and as directed.

Supply only Hammer with handle (Ball pein and cross pein) of 340 grms complete all as specified and as directed.

Supply only Double ended Spanner (Plain) confirming to IS-2028 of size 8x9,10x11, 12x13, 14x15, 16x17, 18x19, 20x21, 22x23, 24x27 complete all as specified and as directed.

Supply only Double Ring Spanner (Plain) confirming to IS-2029 of size 8x9,10x11, 12x13, 14x15, 16x17, 18x19, 20x21, 22x23, 24x27 complete all as specified and as directed.

Supply only Screw Driver confirming to IS-844 of size 150mm, 200mm, 250mm,300mm complete all as specified and as directed.

Supply only Screw Driver star type confirming to IS-844 of size 150mm, 200mm, 250mm, 300mm complete all as specified and as directed.

Supply only Cutting Plier 300 mm complete make- Taparia

Supply Phase Tester complete make- Taparia

M/s Naresh Kalia

prabhave traders