Construction of D type residential quarter for Mamlatdar at Songadh, Dist. Tapi

No figures

1 Excavation for foundation upto 1.5 m depth including sorting 298.00 Cmt 120.01

out and stacking of useful materials and disposing off the

excavated stuff upto 50 Meter lead.(A) Loose or soft soil

2 Excavation for foundation upto 1.5 m depth including sorting 204.90 Cmt 267.87

out and stacking of useful materials and disposing off the

excavated stuff upto 50 Meter lead.(D) Soft rock not requiring

3 Filling in foundation and plinth with sand in layers of 20 cm. 21.00 Cmt 471.69

Thickness including watering ramming and consolidating etc.

4 Filling available excavated Earth (Excluding Rock) in trench 111.00 Cmt 133.65

plinth side of foundation . in layer not excluding 20 cm in

depth consolidation each deposited layer by ramming and

watering etc. complete

layer of 20 cm in thickness including ramming watering and

consolidating etc. complete

6 Anti Termite System 89.00 Smt 134.33

P/L of Permenent piping technology Anti Termite treatment

before flooring work by installing LLDP (Low linear density

Polyethylene) tube of 8 mm O.D.& 6.4 mm I.D.With in Built

Pressure Compenstaion chif every 30 cm interval in the tube,

having working pressure of 2 kg/cm 2 and realese rate of

ltr/Hour fixed by P-Clip and nails . The LLDP pipe shall be

installed at the entire periphery of the building and at

internal network of building depth of 20 to 200 mm under

floor every 2 to 3 mtr.c/c distance (adjustble as per building

layout ) & Ends of loop pass through a PVC Elbow of minmum

32 mm ID at junction box of wall and floor level, entring into a

steel reinforcmed grooved flexible pipe mini.22 mm LD

leading into junction box and during injecting chemicls for

termite control tretment. The anti-termite chemical

Lmidcloprid 30.5% SC Mix as per IS 6313(part-III) shall be

injected by the pressure pump diluted with water @

ml/5ltr of water at the rate of 2 kg/sq,cm.@ 5 ltr /Smt .the

contractor shall submit approved line plan for piping system

and junction boxes dully approved By Engineer -in-charge

with bond of 5 Years warnty .

7 Providing and laying cement concrete 1:3:6 (1-Cement : 3- 13.00 Cmt 3080.90

coarse sand : 6- machine cut stone aggregates 40 mm

nominal size) and curing complete excluding cost of

formwork in (A) Foundation and Plinth

Item Rate In

Description of Item Quantity Unit Amount

No figures

8 Providing and laying controlled cement concrete M150 for 31.80 Cmt 4223.16

curing complete including cost of formwork but excluding the

cost of reinforcement for reinforced concrete work in (A)

Foundations, footings,Base of columns, Plinth Slab and Mass

9 Providing and laying controlled cement concrete M250 and 38.60 Cmt 4620.99

curing complete including the cost of formwork and

excluding reinforcement for reinforced concrete work in (A)

Foundations, footings and Mass concrete.

10 Providing and laying controlled cement concrete M250 and 6.70 Cmt 7351.11

curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in Columns, pillars posts and struts Column Up to Plinth

11 Providing and laying controlled cement concrete M200 and 14.40 Cmt 7304.36

curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in Columns, pillars posts and struts Floor Two Level

12 Providing and laying controlled cement concrete M250 and 16.20 Cmt 6236.84

curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in Ground & Plinth BEAMS

13 Providing and laying controlled cement concrete M150 and 16.00 Cmt 5318.56

curing complete including the cost of formwork and

excluding reinforcement for reinforced concrete work in (C)

Plinth Slabs

14 Providing and laying controlled cement concrete M200 and 14.00 Cmt 6199.87

curing complete including the cost of formwork and

excluding reinforcement for reinforced concrete work in (C)

Floor Two level Beams

15 Providing and laying controlled cement concrete M200 and 1.00 Cmt 6499.46

curing etc. complete including cost of formwork but excluding

the cost of reinforcement for reinforced concrete work in (C)

Chhajja for Floor Two Level

16 Providing and laying controlled cement concrete M200 and 1.00 Cmt 7498.49

curing etc. complete including cost of formwork but excluding

the cost of reinforcement for reinforced concrete work in (C)

Lintal for Floor Two Level

17 Providing and laying controlled cement concrete M200 and 15.00 Cmt 6704.65

curing complete including cost of formwork but excluding the

cost of reinforcement for reinforced concrete work in (C)

Floor Two Level Slab

Item Rate In

Description of Item Quantity Unit Amount

No figures

18 Providing and laying controlled cement concrete M200 and 1.00 Cmt 8367.40

curing etc. complete including cost of formwork but excluding

the cost of reinforcement for reinforced concrete work etc.

complete in (E) Stair case for Ground Floor to First floor

19 Providing and laying controlled cement concrete M200 and 8.00 Cmt 10414.84

curing etc. complete including the cost of form work and

excluding the cost of reinforcement etc. complete in RCC

Vertical and Horizontal wall for Floor Two Level

20 Providing and laying controlled cement concrete M200 for 2.80 Cmt 6437.24

RCC work and curing complete including the cost of form

work but excluding the cost of reinforced concrete work in

Coping on Floor Two Level

21 Providing IS Mark TMT FE 550D bar reinforcement for RCC 16248.00 Kg 95.04

work including bending & placing in position complete up to

All floor Level

22 Providing and fixing 90 cm Height Stainless Steel Railing 9.73 Rmt 3626.51

made from anticorrocive 304 grade S S pipe of 50 mm dia (16

Gauge) as hand rail with S S 304 grade Baluster of 38 mm dia

Box pipe (16 Gauge) as a vertical support fixed in RCC slab at

1.2m c/c including three horizontal S S pipes of 25 mm dia

(16 Gauge) at eqal distance fixed by 18.75 mm dia (16 Gauge)

S S pipe with baluster including accessories as per detailed

living as directed etc. complete.

23 Providing, laying and fixing 60 cm Height MS Railing made 4.00 Rmt 822.65

from anticorrocive up of RCC Perapet Wall on fixing Hand

Railing 50 mm dia (16 Gauge) MS Round Hollow pipe

horizontal 3 Nos and 35mm dia vertical connection pipe 3 No

with all material , laboure charges and accessories as per

requirement as directed by Engineer-in-charge etc. complete.

24 Brick work using common burnt clay building bricks having 45.60 Cmt 4121.55

crushing strength not less than 35 kg./Sq.Cm. in foundation

and plinth in Cement Mortar 1:6. (1- Cement : 6 -fine sand)

(B) Conventional below plinth

25 Brick work using common burnt clay building bricks having 23.00 Cmt 4403.40

crushing strength not less than 35 kg./Sq.Cm. in foundation

and plinth in Cement Mortar 1:6. (1- Cement : 6 -fine sand)

(B) Conventional Floor Two Level

26 Half Brick masonry in common brunt clay building bricks 27.00 Smt 669.34

having crushing strength not less than 35 Kg/Sq.Cm. in

Cement mortar 1:4 (1- Cement : 4 -coarse sand ) in

foundation and plinth (B) Conventional in super structure. for

Floor Two Level

Item Rate In

Description of Item Quantity Unit Amount

No figures

27 Providing and fixing 150 mm wide, approved quality chicken 43.00 Smt 295.12

wire mesh at junction of brick work and RCC work or two

dissimilar surfaces, at all heights fixed by nails, rowal plugs or

tag by cement mortar 1:3 before applying the plaster,

including curing, scaffolding all complete as directed.

28 Providing 20 mm thick double coat mala cement plaster on 287.00 Smt 285.35

interior brick / concrete work for plastering comprising of

base coat of 12 mm thick cement plaster in cement mortar (1

Cement : 4 coarse sand) in rough finishing and 8 mm thick

top coat of cement mortar 1:2 (1 Cement : 2 Coarse sand)

finished with trovel including scaffolding curing, 10x10 mm

grooves etc. complete. For Floor Two Level

29 Providing 10 mm. Thick cement plaster in single coat for 89.00 Smt 155.22

plastering on ceiling and soffits of stairs and finished even

and smooth in : (I) Cement mortar 1:4 (1 cement : 4 sand)

including Mala troveled finish etc. complete. Floor Two Level

30 20 mm thick Sand faced cement plaster with 18x8 mm 399.10 Smt 349.66

grooves as suggested by this office consisting of 12 mm thick

backing coat of C.M. 1:3 ( 1 cement : 3 coarse sand ) and 8 mm

thick finishing coat of C.M. 1:1 ( 1 cement : 1 coarse sand) for

all heights as directed etc. complete. and as per pattern

sample aprroved by the architect or directed engineer in-

31 Providing throating or plaster drip and moulding to R.C.C. 25.00 Rmt 43.22

32 Applying two coats of Acrylic lapy (putty) & two coats of 376.00 Smt 40.59

primer of approved brand and manufacture on new wall

surface to give an even shade including thoroughly brushing

the surface free from mortar dropping and other foreign

matter and sand papered smooth.

33 Wall painting (two coats) with plastic emulsion paint of 287.00 Smt 52.19

approved brand and manufacture on undecorated wall

surface to give an even shade including throughly brushing

the surface free from mortar droppings and other foreign

matter and sand papered smooth.

34 Painting (two coats) with plastic emulsion paint of approved 89.00 Smt 86.92

brand and manufacture on undecorated ceiling surface to

give an even shade including throughly brushing the surface

free from mortar droppings and other foreign matter and

sand papered smooth.

Item Rate In

Description of Item Quantity Unit Amount

No figures

35 Wall Painting (Two coats) with weather proof acraylic 399.10 Smt 117.40

emulsion paint of approved brand and manufacture and of

required shade on exterior wall surface to give an even shade

over and including primery coat with Alkaly resistance

primer of approved brand after thoroughly brushing surface

to remove all dust and remains of loose powdered material

etc. copm. for all height

36 Providing and laying water proofing treatment with china 92.00 Smt 1153.42

mosaic tiles flooring over avg 50 mm C.C. 1:2:4 bedding for

maintaining slope for plain and curve surface & 12 mm to

mm of broken piece not more than 2.5CM of ceramic / glazed

tiles ( one for more colour as directed ) to be laid over cement

mortar bedding of C M 1:3 (1 cement : 3 sand ) contain water

proofing materials per bag of cement useas specified by

manufactured and slops to be tempered to bring mortar up to

surface with using white cement and colour pigment

including rounding of junctions and extending them up to

cm along the wall and curing with bends any patens or design

as per living and cleaning by using oxalic acid etc. complete.

37 Providing Plinth Protection to Building including excavation 48.00 Smt 1450.97

in ordinary soil and laying cement concrete 1:3:6 using stone

aggregates of 40mm nominal size in foundation layer

mm thick below pre-cast Rubber Dye inter locking concrete

block 60mm thick with grade of concrete M300 pneumatic

compressed by mechanically pressed and as per approved

design including 75mm Sand layer for levelling and filling

the joint with sand in proper line and level etc. complete,

Including Providing and fixing pre-cast concrete kerb stone of

grey cement based concrete block 30cm length, 30cm height

and 15cm thick of M250 grade concrete as per approved

design and including excavation for fixing in proper line and

level, filling the joint with C:M 1:3 (1cement:3 fine sand) etc.

38 Providing and fixing 1 mosquito net shutter and 3 shutter 2 5.40 Smt 3557.22

track window having extruded aluminum Colour anodized

section frame main outer size 95mm x 24.10mm x 1.17mm @

wt.of 0.738 Kg/mt , horizontal two track member size 92mm

x 31.75mm x 1.50mm,@ Wt.1.07 Kg/mt , vertical member of

size 92mm x 31.75mm x 1.50mm @ Wt. 1.07 Kg/mt with

sliding shutters of horizontal member size 40 mmx18mm

x1.29mm @ wt.of 0.547 Kg/mt, vertical member of size

40mm x 18mm x 1.29 mm @ wt.of 0.547Kg/mt, Beading clip

19mmx 17.30mmx0.90mm @ wt. of 0.124 Kg/mt with 5 mm

thick transparent bronze colour tinted float glass with

powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details

Item Rate In

Description of Item Quantity Unit Amount

No figures

39 Providing and fixing 1 mosquito net shutterand 2 shutter 3 6.21 Smt 3592.57

track window having extruded aluminum Colour anodized

section frame main outer size 95mm x 24.10mm x 1.17mm @

wt.of 0.738 Kg/mt , horizontal two track member size 92mm

x 31.75mm x 1.50mm,@ Wt.1.07 Kg/mt , vertical member of

size 92mm x 31.75mm x 1.50mm @ Wt. 1.07 Kg/mt with

sliding shutters of horizontal member size 40 mmx18mm

x1.29mm @ wt.of 0.547 Kg/mt, vertical member of size

40mm x 18mm x 1.29 mm @ wt.of 0.547Kg/mt, Beading clip

19mmx 17.30mmx0.90mm @ wt. of 0.124 Kg/mt with 5 mm

thick transparent bronze colour tinted float glass with

powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details

40 Providing & Fixing in position standard extruded approved 0.72 Smt 2724.07

colour anodised Aluminum Ventilation with outer frame 65 x

25 x 1.50 mm Stander Box Frame @ Wt 0.833 kg/Rmt with

5mm thick fixed ground glass and Mosquito net jali fixed to

alluminium strip blade fixed or adjestable ventilation

including all required materials, fixtures, fastenning, labours

and equipments as per detailed living as directed. For

Ventilators

41 Providing and fixing Single shuttered door having green 9.00 Smt 3477.43

marble frame with all open edges machine cut & machine

polished, fixed by zinc coated hinges with double shutter of

factory made & stamped I.S 12823 grade one, type one 35 mm

thick solid core, melamine faced, three layered resin, flushed

door , having decorative lamination on both sides & 12 mm

thick teak wood beading fixed around the door, Durable Grip

shall be providing with both side 15cm long stainless steel

handle and necessary Locking system, S.S. fixtures &

fastenings etc. directed by engineer in charge. Door from

"NOVAPAN" OR Equivalent company holding Licence for

Minimum 5 years.

42 Providing and fixing FRP frame size 100 x 50 mm and 35 mm 4.00 Smt 2363.40

thick ( Fiber Glass with PUF Injection ) FRP depress panel

Single or Double shutter having extra reinforcement on sides

& edges in Gel coat finish.The core of the both shutter &

frame is to be filed up with injected fire retradat grade

polyurethene foam done in situ along with embeded wooden

pieces for stiffening & also taking hinges & fintures.The

whole FRP frame & single or double shutter is to be

waterproof, weatherproof, termite proof & resistance to mild

acid/alkali. Rates are to be inclusive of S.S hinges with

necessary screws & alluminum fixtures & fastenings &

fartener sleeve.Colour and Shade approved by Engineer-In-

Item Rate In

Description of Item Quantity Unit Amount

No figures

43 P & L 60x60 cm' matt finished full body Double vitrified 8 mm 68.00 Smt 1059.83

thick tile flooring over 20 mm (average)base of cement

mortar 1:6 (1cement : 6 coarse sand)on new surface or fixing

on existing flooring by adhesive materials including

dismentalig of existing flooring and jointed with colour

cement slurry including finished with flush pointing &

cleaning the surface etc. complete including colour approved

by directed.

44 Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 7.00 Smt 1169.98

24'' in skrting risers of steps and dedo on 10mm thick cement

plaster 1:3 (1-cement : 3-coarse sand) and jointed with white

cement slurry

45 Providing and laying Ceramic tiles 6mm thick in flooring 6.00 Smt 929.39

treads of steps and landing laid on a bed of 12mm thick

cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with

flush pointing in white cement.

46 Providing and laying coloured glazed tiles of the size 300 mm 28.00 Smt 1477.25

x 200 mm x 8 mm / 300 mm x 450 mm x 8 mm in skirting,

risers of steps and dedo on 10 mm. thick cement plaster 1:3

(1 cement : 3 coarse sand) & jointed with white cement

47 Providing and laying machine cut free edge machine Double 13.00 Smt 2023.03

polished granite stone 18mm thick finished treads and risers

in with 1cm projecting, nozing rounded moulding in tread

laid over 12 mm (av.) thick bases of cement mortar 1:6 (1-

cement : 6-coarse sand) jointed with grey or colour cement

slurry including rubbing and polishing incl. making Three

No.s of grooves of size 3mm X 3mm along the length of treads

etc. complete

48 Providing and fixing mirror polished 16 mm to 18 mm thick 25.00 Smt 2011.92

Green Marble with full round edge and polished of approved

quality in clading on sill and around the doors/ windows/

ventilation with 12 mm thick cement mortor CM (1:4) and

fixing with cement slurry & adhesive including moulding of

exposed edges as directed by engineering in charge etc.

49 Providinfg and fixing Safty grills of required pattern for 646.00 Kg 112.11

windows/ Door using necessary 16x16 mm M.S. Square bar,

M.S flats or specified Design steel at required spacing

including cutting, welding and fabriction etc. including one

coat of primer of approved quality and two coats of oil

painting as per detail living etc complete.

50 Providing erecting and fixing double coated Syntex PVC. (ISI) 2000.00 Litre 3.95

water tank of required capacity each with all necessary

fittings and connection etc. complete on terrace.

Item Rate In

Description of Item Quantity Unit Amount

No figures

51 Providing laying and jointing in true line and level 50mm dia. 45.00 Rmt 195.67

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

52 Providing laying and jointing in true line and level 40mm dia. 20.00 Rmt 148.12

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

53 Providing laying and jointing in true line and level 25mm dia. 30.00 Rmt 91.84

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

54 Providing laying and jointing in true line and level 15mm dia. 30.00 Rmt 72.65

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

55 Providing, laying and jointing in true line and level 160 16.00 Rmt 834.38

diametre U.P.V.C (Type B) conforming to IS 13592-1992 with

one end plain and other end socketed with rubber ring, &

fittings conforming to ISI 14735-1999 of approved make for

drainage system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on wall using

of PVC clamp of the size 160 mm diametre x 210 mm length x

196 mm heigh at every 2000 mm center to center or shall be

concealed in walls as directed including necessary fittings

such as bends, shoes etc. including testing of pipes and joints

and jointed with adhesive solvent cement including cost of all

materials.

Item Rate In

Description of Item Quantity Unit Amount

No figures

56 Providing, laying and jointing in true line and level 110 16.00 Rmt 857.65

diametre U.P.V.C (Type B) conforming to IS 13592-1992 with

one end plain and other end socketed with rubber ring, &

fittings conforming to ISI 14735-1999 of approved make for

drainage system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on wall using

of PVC clamp of the size 110 mm diametre x 149 mm length x

145 mm heigh at every 2000 mm center to center or shall be

concealed in walls as directed including necessary fittings

such as bends, shoes etc. including testing of pipes and joints

and jointed with adhesive solvent cement including cost of all

materials.

57 Providing, laying and jointing in true line and level 75 mm 10.00 Rmt 293.91

dia. UPVC SWRType B pipe conforming to IS 13592-1992

with one end plain and other end socketed with rubbering

and fitting conforming to ISI 14735-1999 of approved make

for drainage system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on wall using

of PVC clamp at every 2000 mm c/c or shall be conceled in

walss as directed including necessary fittings such as bends,

shoes etc. including testing of pipes and joints and jointed

with adhesive solvent cement including cost of all materials.

58 Providing and fixing in PVC SWR cowel went 75mm dia to 2.00 No 16.16

pipes.(B) 75mm dia.

59 Providing and fixing in PVC SWR cowel went 110mm dia to 4.00 No 29.29

pipes.(B) 110mm dia.

60 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 4.00 No 585.37

100 mm diameter with jali of the following nominal diameter

of self cleansing design with C.I scread down or hinged

grating including the cost of cutting and making good the

61 Providing and fixing wash down water closet (European type 2.00 No 3035.05

W C pan) with integral P and S trap including jointing the trap

with soil pipe in cement mortar 1:1 (1 cement five sand)

including providing and fixing plastic seat cover for wash

down WC with CP brass hinges and rubber buffers back

plastic seat and including providing and fixing PVC flushing

tank with a pair of C I or MS bracket with complete fitting

such as lead valve siphon 15 mm dia brass ball valve with

polythene float CP brass handle unions and couplings for

connection with inlet out let and over flow pipes 40 mm dia

porcelain enameled flush bend including cutting holes in

walls and making good the same connection the flush bend

with cistern and closet vitreous china.

62 Providing and fixing brass screw down stop tap.(A) 15mm 4.00 No 205.83

Item Rate In

Description of Item Quantity Unit Amount

No figures

63 Providing and fixing ball cock of approved. quality as 1.00 No 189.84

directed.(A) Copper Metal (ii) 50mm dia.

64 Providing and fixing washbasin with single hole for pillar tap 3.00 No 1649.22

with C.I. or M.S. brackets painted white including Rubber

plug, sutting holes and making good the same but excluding

fittings and also including rate of C.P. brass waste for

washbasin or sink (A) 32mm dia. and M.I. fisher union for

washbasin or sink. (A) 32mm dia.; (A) Vitreous China:(ii) Flat

Back washbasin 550 mm x v 400mm size. (i) In white colour.

65 Providing and fixing 600mm x 450mm bevelled edge mirrror 4.00 No 852.76

of superior glass mounted on 6mm thick A.C. sheet or

plywood sheet and fixing to wooden pluge with C.P. brass

screws and washers.

66 Providing and fixing C.P. brass towel rail comlete with C.P. 4.00 No 616.42

brass brackets fixed to wooden plugs with C.P. brass scews

(B) 600mm x 20mm size.

67 Providing and fixing screw down bib taps of following 3.00 No 214.81

size.(A) Brass screw down bib tap polished bright. (i) 20mm

68 Providing and fixing pillar tap, capstan head, screw down 3.00 No 308.73

high pressure with screws, shanks and back nuts. (i) 15mm

69 Providing and fixing chromium plated brass half trun flush 2.00 No 263.77

cock of approved quality including fixing in pipe line etc.

complete (ii) 25mm dia.

70 Providing laying (to level or slopes) and jointing reinforced 117.00 Rmt 678.01

concrete Light duty non-pressure pipes I.S. class NP2 of the

following internal diameter with collars and butt ends

prepared for collar joints including testing of joints complete.

71 Providing and laying (two level or slopes) and jointing with 50.00 Rmt 526.46

stiff mixture of Cement Mortar in proportion 1:1, Salt glazed

stone ware pipes of PVC pipes 150mm laying lime concrete

1:2:4 (1-Lime putty :2-Fine samd : 4-Graded brick aggregates

40mm nominal size) bedding for stoneware pipes of

following internal diameters with necessary formwork and

curing complete.

72 Providing and fixing S.W. gully trap with C.I. grating brick 2.00 No 1246.92

masonry chamber and water tight C.I. cover with frame of

300mm x 300mm size (inside) with standard weight (i)

Square mouth traps (B) 150mm x 100mm size P or R type

Item Rate In

Description of Item Quantity Unit Amount

No figures

73 Constructing brick masonry chamber for underground C.I. 8.00 No 3223.92

Inspection chamber and bends with briocks having croshing

strength not less than 35Kg. Cm2 in C.M. 1:5 precast RCC

cover 455mm x 610mm intenal dimensions with frame

(R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-

graded stone aggregate 20mm size) foundation concrete

1:5:10 inside plaster 15mm thick with cement mortar 1:3

finished smooth with a floating coat of neat cement on walls

and bed concrete etc. complete (i) Inside dimensions

455mmx 610mm and 450mm deep for single pipe line.

74 Constructing brick masonry chamber for underground C.I. 5.00 No 3903.65

Inspection C.I. Inspection chamber and bends with briocks

having croshing strength not less than 35Kg. Cm2 in C.M. 1:5

precast RCC cover 500mmx 700mm intenal dimensions with

frame (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse

sand :4-graded stone aggregate 20mm size) foundation

concrete 1:5:10 inside plaster 15mm thick with cement

mortar 1:3 finished smooth with a floating coat of neat

cement on walls and bed concrete etc. complete (i) Inside

dimensions 500mmx 700mm and 450mm deep for single

pipe line.

75 Constructing brick masonry chamber for underground C.I. 2.00 Each 242.39

Inspection chamber and bends with briocks having croshing

strength not less than 35Kg. Cm2 in C.M. 1:5 precast RCC

cover 455mm x 610mm intenal dimensions with frame

(R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-

graded stone aggregate 20mm size) foundation concrete

1:5:10 inside plaster 15mm thick with cement mortar 1:3

finished smooth with a floating coat of neat cement on walls

and bed concrete etc. complete (i) Inside dimensions

455mmx 610mm and 450mm deep for single pipe line.

Extra over items for every additional depth of 0.1M. of part

thereof beyond 450mm depth for Brick masonry chamber.(i)

for 455mm x 610mm size.

76 Constructing brick masonry chamber for underground C.I. 2.00 Each 264.86

Inspection C.I. Inspection chamber and bends with briocks

having croshing strength not less than 35Kg. Cm2 in C.M. 1:5

precast RCC cover 500mmx 700mm intenal dimensions with

frame (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse

sand :4-graded stone aggregate 20mm size) foundation

concrete 1:5:10 inside plaster 15mm thick with cement

mortar 1:3 finished smooth with a floating coat of neat

cement on walls and bed concrete etc. complete (i) Inside

dimensions 500mmx 700mm and 450mm deep for single

pipe line.

Extra over items for every additional depth of 0.1M. of part

thereof beyond 450mm depth for Brick masonry chamber.(i)

for 500mm x 700mm size.

Item Rate In

Description of Item Quantity Unit Amount

No figures

77 Providing and fixing MS Ladder of required pattern with GI 300.00 Kg 95.95

flats(30x3mm) or round or square bars (12mm) at required

spacing & with round headed bolts and nuts or screws or

welding including primer coat of approved quality and two

coats of oil paintas as directed by engineer in charge

78 Constructing Kitchen Platform of 18 mm thick Polished 4.00 Smt 4193.52

Theliphonoc Black Granite at top and 25 mm thick Kota stone

slab one side polished at bottom with cementing Materials /

adhsives including makeing necessary grooves in walls with

Vertical sandwich two Kotastone 25 mm support every

cm centre to centre or as required including all labour

material of approved quality incl. full moulded round front

edge granite strip of one side polished and jointed with grey

cement slurry including rubbing and polishing etc. complete

for all floors

79 Providing and fixing 20 to 25 mm thick polished kota stone 7.00 Smt 667.61

Shalve with full round edge and double side polished of any

required and fixing with cement slurry & adhesive including

both exposed edges cut and Smooth Finished as directed by

engineering in charge etc. complete.

80 Providing and fixing Kitchen sink with C.I. or M.S. brackets, 1.00 No 3640.04

painted white including cutting holes in walls and making

good the same but excluding fittings. (C) Vitreous China

Sink.(i) 600mm x 450mm x 150mm size

81 Providing and fixing Kitchen platform trolley having three 4.00 Smt 12664.39

drawers of SS (IS 304) of required size like thali, katleri,

perforated, partition, cupsosar type in kitchen platform

having drawer front side and backside by using 19mm thick

all proof plywood PVC moduler of ISI quality all side

laminated etc. as directed. The size of SS (IS 304) basket of

size 4" to 18" for thali, dish, katleri, perforated, partition,

cupsosar type as directed including necessary S.S. fittings,

handles, nobs, telescopic channels, etc. as directed

82 Providing & fixing Cupboard shutter having 25mm thick 4.00 Smt 3717.81

block board & including with frame 25 mm x 50 mm size as

directed etc. complete including necessary both side

lamination 1 mm thick outer side & 0.80mm thick inner side

fixing by necessary 6" SS hinges, 8" handles, magnet,

stoppers, etc. as directed including fevicol, and other

hardware material required. Plywood and all fixture shall be

of ISI quality and as approved by engineer-in-charge

including cost of teak wood beading, one coat of primer and

two coats of oil painting or polishing as directed.

Item Rate In

Description of Item Quantity Unit Amount

No figures

83 Providing and placing TV unit with shutter size 1.00 No 20553.50

(1.5x0.40x0.45)mfeaturing base material comprising kiln

dried and treated fine quality C.P. Teakwood (M5) legs with

carving as per reference image and 19mm thick plywood

(M1) + veneer structure with wooden carved beading patti

and flutes as per living. Both shelves to be kept open from

behind to accommodate the electrical switch boards.

Finishing includes 4mm thick veneer (M23) as per living and

edges of plywood covered with 8mm thick Teak wood

beading Patti (M4) and 0.8mm thick liner laminate (M25)

over inside faces. Hardware comprises all necessary fixtures

and fasteners (M14) including anti-slip leg pads, brass kadi as

involves hiding electrical conduits and TV cables inside brick-

wall, with only switch boards visible behind the TV unit and

inside open shelf, while the set-top box is to be kept inside

shelves. Polishing to be done on all exposed wooden and

veneer faces with matt/glossy finish melamine polish (M29).

Completion to be in accordance with livings and instructions

of Architect and Engineer-in-Charge, referencing the

provided image.

84 Provide and Fixing of a Low Height Storage Unit designed for 1.00 No 24442.00

both functionality and elegance. The base structure is

constructed with 19mm thick Plywood (M1), supported by

kiln dried and treated fine quality C.P. Teakwood (M5) carved

legs, resembling the reference image. The unit is finished

with a 1mm thick Decorative Laminate (M24) sheet as per the

adorned with 8mm thick Teakwood beading Patti (M4) for

added durability and aesthetics. Inside, 0.8mm thick Liner

laminate (M25) ensures easy cleaning and maintenance. The

shutters and drawers are equipped with required hinges

(M18), magnets (M18), locks (M16), telescopic roller

channels (M15), and handles (M19) as depicted in the living.

Additionally, a 3X0.5CM wooden frame is fixed over the

shutters for enhanced visual appeal. All necessary fixtures

and fasteners (M14), including anti-slip leg pads, are included

for stability and safety. All exposed wooden faces are polished

with a matt or glossy finish melamine polish (M29) to elevate

their appearance and protect against wear and tear. The unit

features removable ply-shelves supported on teakwood (M5)

side battens on both sides, providing versatility and

convenience. Completion of the Low Height Storage Unit is to

be carried out in strict accordance with the provided livings

and instructions of the Architect and Engineer-in-Charge,

with reference to the accompanying image.

Item Rate In

Description of Item Quantity Unit Amount

No figures

85 Providing, supplying, and placing Stainless Steel Perforated 2.00 No 988.79

Mesh Garbage Dustbin of size 8 x 12 inches with a capacity of

10 liters. The dustbin shall be made of high-quality corrosion-

resistant stainless steel with a perforated design for

enhanced ventilation and odor control. It shall be lightweight,

durable, and suitable for use in residential, commercial, and

institutional spaces. The work includes delivery, positioning,

and secure placement at the designated location as per the

instructions of the Engineer-in-Charge, ensuring proper

alignment and functionality.

86 Providing and arranging a OXMIC Engineered Wood Shoe 1.00 No 1055.45

Cabinet Storage/Shoe Organizer/Shoe Rack size 10D x 10W x

10H Centimeters for Home,Shoe

Rack/Cabinet/Shelf/Wooden Storage Installation shall be

carried out as per the manufacturer’s guidelines and under

the supervision of the Engineer-in-Charge, ensuring proper

anchoring, alignment, and functionality for long-term

reliability.

87 Providing and Placing Fabric Curtain with Rod & Eyelet 12.00 Smt 2499.75

(M35) combines functionality and aesthetics to enhance

window treatments. The assembly comprises a scratch and

rust-free 25mm metal (iron) rod with decorative round

finials on each end, finished with a powder-coated surface in

preference. Installation is executed with great precision,

ensuring a perfect fit for all windows. The curtain fabric

features a blackout astar, chosen by the architect for its light-

blocking properties. Stitching and fixing are carried out as per

the design requirements. All necessary fixtures and fasteners

(M14), including finials, brackets, and fishers, are provided

for secure installation. Completion of the Fabric Curtain with

Rod & Eyelet will adhere strictly to the provided livings and

instructions of the Architect and Engineer-in-Charge,

ensuring precise execution and alignment with the intended

design aesthetic.

88 Providing and fixing in position 150 mm high, English letters 20.00 No 404.00

made from 1.0 mm thick stainless steel sheet as directed by

Engineer in charge with all necessary tools & plants etc.

89 Providing and fixing C.P. brass shower rose with 15mm or 2.00 No 282.17

20mm inlet.(A) 100mm dia. Each

90 Providing and laying cement concrete 1:2:4 (1- Cement : 2- 3.00 Cumt 3786.47

Coarse sand : 4- graded stone aggregates 20 mm nominal

size) and curing complete excluding cost of formwork in (A)

Foundation and Plinth

Item Rate In

Description of Item Quantity Unit Amount

No figures

91 Providing 15mm thick cement plaster in single coat on Rough 68.00 Sqmt. 222.24

(Similar) side of single or half birck walls / concrete wall for

interior plastering and finished even and smooth in C M 1:4

(1 cement : 4 coarse sand) with floting coat of neat cement

slurry etc. comp. For Ground floor

92 Constructing brick masonry chamber for underground C.I. 3.00 No. 7180.44

Inspection chamber and bends with briocks having croshing

strength not less than 35Kg. Cm2 in C.M. 1:5 C.I. cover with

frame (Light duty) 455mm x 610mm intenal dimensions,

total weight of cover with frame to be not less than 38Kg. (Wt.

of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe

with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete 1:5:10 inside

plaster 15mm thick with cement mortar 1:3 finished smooth

with a floating coat of neat cement on walls and bed concrete

etc. complete.(iii) Inside dimensions 600mm x 850 mm and

450mm deep for pipe lines with three or more inlets.

93 Drilling of 165 mm dia bare in over burden strata and further 50.00 Rmt 196.95

drilling of 165mm dia bore in all typs of strata with DTH ring

including lowering of casing pipe up to requied length and

testing etc. including testing with ben meter.

94 Providing and lowering of 165mm FVPVC pipe zero to 50.00 Rmt 536.57

overburden strata

95 Providing and lowering 165 mm dia PVC pipe etc complete 15.00 Rmt 252.50

96 Providing and fixing M. S. cap –plug hinge type with frame 1.00 No. 165.64

of required design for 150mm dia Bore casing pipe

97 Suppling and installing submersible pumping set 7.50 HP 1.00 Set 26300.40

manufactured as per IS standard including non return valve

sluice valve flexible cable ( asrequired 70 mtr length ) volt

meter, panel board, capacitor,starter,switch, pressure guage

with accessories of approved manufacture tools of 50 Hours

power capacity.

98 Providing and fixing check or non return pully wheel valve of 1.00 No. 1111.00

50 mm diameter.

99 Providing and fixing to wall,ceiliing and floor galvanised mild 50.00 Rmt 794.18

steel tubes ( Medium grade ) of the following nominal bore,

tube, fittings and clamps included making good the wall,

ceilling and floor (F) 50 mm

100 Box cutting the road surface to proper slope and camber for 44.00 Cum. 106.65

making a base for road work including removing the

excavated stuff and depositing on the road side slope as

directed upto 50Mt.lead.

101 Filling in plinth with sand under floors including watering 12.00 Cum. 364.61

ramming, consolidating and dressing complete for road work

Item Rate In

Description of Item Quantity Unit Amount

No figures

102 Construction of granular sub-base 150 mm thick by 12.00 Cum. 656.50

providing coarse graded machine crushed B.T. material

satisfying MOST specification of grading I (B.T. stone

aggregate 53 mm to 26.5 mm 35 %, 26.5 to 4.75 mm - 45 %

and 2.36 mm below - 20 % )including spreading in uniform

layer with motor grader on prepared surface, mixing by mix

in place method with rotavator at OMC and compacting with

vibratory roller to achieve the desired density etc. complete.

103 Providing and laying wet mix macadam base course 250 mm 12.00 Cum. 823.15

thick using machine crushed B.T. chips as per required

gradation mixing with required optimum quantity of water,

conveying the mix to site of work, spreading in to grade and

camber with mechanical paver and consolidation each layer

with vibratory roller including cost of material labour plant

and equipment etc. complete.

104 Compaction and finishing of cement concrete road by trimix 79.00 Sqm 63.63

M.250 process providing extra Labour charges for the trimix

vacume dewatering service process on cement concrete road

sutface by using vacuum dewatering pump floater surface

vibrator including making groves and rough finish to surface

including leveling etc complete.

105 Providing and fixing pre-cast Rubber Dye inter locking 30.00 Sqm 704.07

concrete block 60mm thick with grade of concrete M30

pnumatic compressed by mechanically pressed and as per

approved design confirming to IS 15658: 2006 including

35mm Sand layer for levelling and filling the joint with sand

in proper line and level as per guidelines of IRC SP 63-2018

etc complete.

106 Providing and Laying homoginious Grey cement based 50.00 Rmt 370.68

concrete kerbing of size 30 cm x 30 cm x 10 cm size as per

detailed drawing having grade of concrete M25 grade,

including necessary excavation, BBCC 1:5:10 7.5 cm as per

ddetailed drawing fixing in line and level, filling joints in CM

1:3 with smooth finished, white washing three coats etc.

complete as directed by Engineer in charge.

107 Supplying FIRE bucket round bottom of 9 litres capacity made 4.00 Nos 180.00

out of 24 gauge G.I Sheet with extra handle at bottom duly

painted white inside and Red out side with FIRE mark. Filled

with dry-sand and kept on existing stand provided or hung on

wall hook.

108 Supplying and erecting floor mounting Stand for keeping four 1.00 Nos 3500.00

nos. of FIRE buckets comprising 1500 mm in length, 900 mm

height frame made out of 30mm x 30 mm x 4 mm angle iron

with cross suports legs, welded with 4 hooks and duly

painted with one coat of red lead and two coats of approved

enamelled silver paint.

109 Supply, Filling and Fixing of following type of approve make 2.00 Nos 5000.00

fire extinguishers CO2 type fire extinguisher, Capacity 4.5 Kg.

(conforming to IS-2878).

Item Rate In

Description of Item Quantity Unit Amount

No figures

110 Design , Supply and installation of Safety Signage made of 50.00 SQ 11.00

Zinc Sulphilde based glow in dark , Rigid sheet with High INCH

Luminous property enclosed in a transperent weather proof

UV stabilized plastic pasted on 3 mm thick clear acrylic sheet

such as EXITS, EMERGENCY EXIT, DO NOT USE LIFT DURING

FIRE, FLOOR MARKINGS, FIRE LIFT, STAIRCASE EXIT, FIRE

ALARM CALL POINT, FIRE HOSE REEL, FIRE HYDRANT

POINT etc.

111 Supply, Filling and Fixing of following type of approve make 2.00 Nos 2600.00

fire extinguishers Dry powder type, Capacity 5 Kg.

(conforming to IS:2171 with cylinder fully charged).

112 Providing and fixing decorative entrance slidng gate made 550.00 kg 164.63

out of cast iron and various mild steel tabular section

combination , the MS gate with sliding mechanisum of all

including pattern and die making , cutting , welding

grinding, fabrication , fixing in position at compound wall

with necessary pedestal, bearing block and other locking

arrangement. The entrance gate should be painted with two

coats of priming coat of paint, and two coat of oil paint etc

complete. As per detail design and instruction of architect.

113 Providing and fixing concertina coil fencing with punched 50.00 Rmt 319.16

tape concertina coil 600 mm dia 10 mt openable length

having 50 no rounds per 6 mt length, upto 3mt height of wall

with existing angle iron (50mm x50mm x5mm )requird

shaped As per Directed Engeenier in charge. placed 2.4mt or

3.00mt apart and with 4 horizontal R.B.T. reinforced barbed

wire(3 mm) , stud tied with G.I. staples and G.I. clips to retain

horizontal, including necessary bolts or G.I.barbed wire tied

to angle iron, all complete as per direction of Engineer-in-

charge, with reinforced barbed tape (R.B.T.)/Spring core (2.5

mm thick) and weight 43.478 gm/meter at compound wall

for ESR M4/ intakewell.

114 Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire 16.00 Pt. 582.77

of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multi strand copper wires up to 10 mtr

length , in below type of pipe erected with 6A Modular type

switch / bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/Wooden box, single

mounting base frame covered with textured/ metallic/ white

front plate modules erected on / in wall / ceiling as per pipe

erected, with necessary Lamp holder/ ceiling rose /

H.D.Connector as directed. (f) with medium class Rigid PVC

pipe and accessories erected concealed in wall/ceiling

complete Cat. III

Item Rate In

Description of Item Quantity Unit Amount

No figures

115 Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire 4.00 Pt. 291.39

of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multi strand copper wires up to 10 mtr

length , in below type of pipe erected with 6A Modular type

switch / bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/Wooden box, single

mounting base frame covered with textured/ metallic/ white

front plate modules erected on / in wall / ceiling as per pipe

erected, with necessary Lamp holder/ ceiling rose /

H.D.Connector as directed. (f) with medium class Rigid PVC

pipe and accessories erected concealed in wall/ceiling

complete W/C Cat. III

116 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 5.00 Pt. 809.01

sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS

PVC insulated multi strand copper wires up to 10 mtr length,

in below type of pipe erected with 6A Modular type switch

and hum free EME step type electronic fan regulator

mounted and accessories with earth continuity of following

type erected on PVC / Metallic/ Wooden box, single mounting

base frame covered with textured/metallic/white front plate

modules erected on / in wall / ceiling as per pipe erected.

with necessary ceiling rose / H.D.Connector as directed. (f)

with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete Cat. III

117 Point wiring for on board Looped Plug with 6A Modular type 5.00 Pt. 309.06

switch & 5 pin socket erected on PVC/ Metallic/ Wooden box,

single mounting base frame covered with textured / metallic/

white front plate modules erected on/ in wall/ ceiling with

following type accessories Cat. III

118 Providing following type of Modular Type Accessories 7.00 Nos 151.50

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate

, modules erected with necessary connections as per site

situation directed by Engineer In charge. (1)One No. SP

Amp. Cat.III

119 Providing following type of Modular Type Accessories 7.00 Nos 151.50

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate

, modules erected with necessary connections as per site

situation directed by Engineer In charge. (2) One No 5 pin

plug Cat.III

120 Providing following type of Modular Type Accessories 1.00 Nos 160.59

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate

, modules erected with necessary connections as per site

situation directed by Engineer In charge. (4) TV Co-axial

Socket outlet Cat.III

Item Rate In

Description of Item Quantity Unit Amount

No figures

121 Providing following type of Modular Type Accessories 10.00 Nos 180.79

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate

, modules erected with necessary connections as per site

situation directed by Engineer In charge. (9) 16 Amp. SP one

way switch Cat.III

122 Providing following type of Modular Type Accessories 10.00 Nos 199.98

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate

, modules erected with necessary connections as per site

situation directed by Engineer In charge. (10) 6/16Amp.

Universal socket Cat.III

123 Providing and erecting Mains with 1.1 KV grade FRLS PVC 308.00 Mtr. 104.03

insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected concealed in /flushed on

wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth continuity

of following size (A) With medium class Rigid PVC pipe and

accessories (b) 2 wire 2.5 sq. Mm

124 Providing and erecting Mains with 1.1 KV grade FRLS PVC 220.00 Mtr. 140.39

insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected in / on wall / ceiling with

2.5 sq. mm copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of following size (A)

with medium class Rigid PVC pipe and accessories (a) 2 wire

125 Providing and erecting Mains with 1.1 KV grade FRLS PVC 60.00 Mtr. 326.23

insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected in / on wall / ceiling with

2.5 sq. mm copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of following size (A)

with medium class Rigid PVC pipe and accessories (h) 4 wire

126 Providing & Erecting approved make following size of TV Co- 30.00 Mtr. 39.39

axial flexible cable comprising inner conductor of solid bare

copper insulated with Foam PE & Secondary conductor made

of poly - Aluminium film bonded Al. Braids @ suitable

coverage overall sheathed with black PVC insulation. (b) RG-

127 Supplying & erecting approved make LAN cable of following 30.00 Mtr. 47.47

size in existing pipe as per direction [C] CAT -

Item Rate In

Description of Item Quantity Unit Amount

No figures

128 Providing & erecting Switch board for Computer or electric 3.00 Nos. 1133.22

apparatus consisting of following modular type accessories

mounted with PVC/ Metallic concealed/ open box with single

mounting base frame covered with textured/ metallic/ white

front plate,modules erected with necessary connections as

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug

For Modular Type Accessories

129 Call bell gong type suitable for 230 volts, 50 c/s. AC supply 1.00 Nos. 42.42

complete Erected

130 Supplying and erecting LED indoor fittings with LEDs of 7.00 Nos. 373.70

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/ CRCA/ aluminium die cast

powder coated and high U.V. & corrosion resistance with

diffuser with company mark/name 160V to 270V, Power

Factor more than 0.95, THD < 15%, CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/ watt, LED driver efficiency >

85 % (fitting required LM-79 & LM-80 Certificates) (NOTE:

Below description have shown ranges of Wattage capacity of

capacity between the ranges shown.) (A) Tube Light with

integral driver (iv) 22-24 Watts, Surge - 2KV,IP-20,

conventional 4 feet Cat.III

131 Supplying and erecting led lamps with following wattage 10.00 Nos. 112.11

capacity of 220 to 240 voltage, minimum 15000 burning

hours life, 500 V in built-surge protection,Polycarbonate

diffuser, mounting suitable for E14 / E27 / B22 lamp holders,

(A) LED Lamps integral type, with PC diffuser suitable LAMP

holder (ii) 5 to 8 watts Cat-III

132 Supplying and erecting LED street light / Flood light fittings 6.00 Nos. 2843.15

with High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than 130 lm/w

and corrosion free High pressure die cast aluminum housing

with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses,

with toughened glass with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than 0.95, THD <

10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt . LED driver efficiency

> 85 %. (fittings required LM-79 & LM-80 certificates)

(NOTE: Below description have shown ranges of Wattage

wattage capacity between the ranges shown.) (A) Street Light

(IP-65), Surge protection -4KV integral and ,Light must have

440VAC line supply with over-voltage protection. (i) 36 -

watts Cat.III

Item Rate In

Description of Item Quantity Unit Amount

No figures

133 (B) Flood Light (IP-65), Surge protection -4KV integral and 6.00 Nos 6177.16

,Light must have 440VAC line supply with over-voltage

protection. (iv) 90 - 119 wattsCat-III

134 Providing and erecting Miniature circuit breaker single pole 10.00 Nos. 297.95

0.5A to 2A system and having breaking capacity 10 KA to be

erected in existing box. confirming to IS 8828/1996 with ISI

Mark Cat.III

135 Providing and erecting Miniature circuit breaker single pole 12.00 Nos. 123.22

6A to 25A suitable to operate on 240 V A.C. system and

having breaking capacity 10 KA to be erected in existing box.

confirming to IS 8828/1996 with ISI Mark Cat.III

136 Providing & erecting 415 V MCB Four Pole for Motor & 2.00 Nos. 811.03

Inductive Load (C Curve) having 10KA breaking capacity &

confirms to IS :8828 in existing box having following capacity

(c)63 Amp. Cat.III

137 Providing and erecting Sheet Steel powder coated MCB 1.00 Nos. 355.52

distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS

8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of same

company of MCB to be used) suitable for (A) single phase

incoming and horizontal single phase outgoing (a) single

door (IP-30) (i)4 way

138 Providing and erecting Sheet Steel powder coated MCB 1.00 Nos. 2339.16

distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS

8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of same

company of MCB to be used) suitable for (B) three phase

incoming and single phase horizontal type outgoing Per

phase isolation type (PPI) (b) sheet steel double door (i)4

139 Providing and erecting Approved make RCCBs conforming to 3.00 Nos. 2458.34

IS: 12640 and having sensitivity of 30 mA and Short Circuit

withstand capacity of 10 KA and suitable for operation on

single phase 240 V,50Hz. having characteristic of quick action

& tripping with all advance feature & do not incorporate any

electronic component. for following Max. rating erected as

directed (ii) 40Amps. DP Cat. III

Item Rate In

Description of Item Quantity Unit Amount

No figures

140 Supplying & erecting earth pit of minimum bore dia.150mm 2.00 Nos. 4591.46

size approved make Earthing Electrode consisting Pipe-in-

Pipe Technology as per IS 3043-1987 made of corrosion free

hot dipped G.I.Pipes having Outer pipe dia of 50mm having

80-200 Micron galvanising, Inner pipe dia of 25 mm having

200-250 Micron galvanising, connection terminal dia of

12mm with constant ohmic value surrounded by highly

conductive compound with high charge dissipation suitable

for following type of applications with chamber and heavy

duty cover. (A)(approved make OEM has to submit test

certificate including value of earth resistance of installation

duly stamped and signed by agency and officer Incharge has

to ensure the value of earthing resistane mentioned in test

Certificate) & having back filling compound of (B) Inner

chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter

testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no

load & dry form, Sulphar content:- <2%(C) Back fill

Compound :- Earthing compound should be capable to retain

moisture for long time Necessary test report must be

submitted by Agency. (a) For Electrical Installation up to

440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

141 Providing and erecting Annealed bare Copper wire 8 to 16 24.00 Kg 794.87

142 Providing and erecting XLPE (IS:7098) (I)-88 ISI armoured 250.00 Mtr. 151.50

cable multistrand / Solid Aluminium conductor for 1.1 KV. to

be laid on wall with necessary clamps or in existing trench /

pipe of following size of cables (B) 4 core 6 Sq. mm

143 Providing and, fixing heavy duty flange type brass cable gland 4.00 Nos. 38.38

with rubber ring for PVC insulated armoured cable complete

with out going tails, insulating tape etc for following size of

cables. (B) 2 to 4 core 6 Sq. Mm

144 Solder less crimping type Aluminium lugs conforming to IS 96.00 Nos. 6.06

suitable for cable of following size evenly crimped with high

pressure tool & connected to switchgear terminals with

brass/ cadmium plated nut bolts in an approved manner. (A)

145 Providing and erecting Approved make Ceiling fan with 5.00 Nos. 1596.81

double ball bearing ISI mark with condenser A.C. 23OV.50

c/s.1200 mm. sweep complete, canopy erected on existing

hook or clamp with earthing. [Make shall be approved by

Engineer in charge]

146 Supplying and erecting 19 / 20 mm. nominal bore Medium 5.00 Mtr. 108.07

Class M.S. Pipe down rod erected duly painted for fan

complete with proper insulation without leakage and

Item Rate In

Description of Item Quantity Unit Amount

No figures

147 Supplying & erecting fan hook box of 10 mm M.S. round bar 5.00 Nos. 108.07

bounded to the RCC bars up to 50mm length each side and

pierced through a 16 Gauge M.S. box / Heavy Duty PVC box

complete erected concealed in Ceiling with necessary

finishing.

148 Supplying & erecting single phase approved make industrial 2.00 Nos. 2054.34

exhaust fan suitable for medium duty ring mounted low noise

operation suitable for medium duty having following dia size

and maximum speed in RPM [A] 305 mm dia 900 RPM Cat.II

149 Supplying & erecting approved make SMC press moulded 6.00 Nos. 476.72

composite FRP. loop-in, loop-out approx. 2mm thick box

complete with Bakelite connector strip 5way(3P+N+E),DIN

rail for mounting mob & hinged doors as per requirement

having locking arrangements with mounting clamp with nuts,

bolts & washers suitable for erection on pole with cable

clamps& earth bolt of following size of box. (C)150mm x

125mm x 100mm [deep]

150 Supplying and erecting B class galvanised iron pipe 32 mm 6.00 Nos. 343.40

outside dia 45 cm long duly welded on 20 cm x 20 cm x 3 mm

thick M.S. base plate, erected on wall or corner for mounting

street light luminaire with necessary hardware materials duly

151 Supplying and erecting approved make Octagonal pole made 4.00 Nos 7561.87

from HR sheet steel. The pole should be made as per IS. and

shall be coated with hot dip galvanizing as per IS

2629/2633/4759, suitable suspend local wind speed with

integral Junction box consist of terminal plate of min 6mm

Hylam sheet, standard profile 35mmX7.5mm Din-Rail for

MCB Mounting, stud type terminal and arrangement for cable

termination to be erected With Suitable foundation

(Included) as per details given by manufacturer considering

site requirement.(C) 5 Mtr. Long 70 mm Top X 130 mm

bottom dia, 3 mm thickness with 200mmX200mmX12mm

base plate, 4-M16 Bolts and 600mm long with necessary G.I. J

Bolts .Approx Pole weight 46 kg

152 Supplying and erecting Street light pole bracket comprising 2.00 Nos 450.46

main B Class MS pipe of 4.2 cm/require outside dia. complete

with suitable B Class M.S. sleeve tubing of approx.

45cms.length and suitable for 76.5mm/80mm/require size of

pole top having nuts and bolts for fixing the brackets and

having spread of 0.5 mtr. Length with 110 deg.with vertical

plane and suitable welded stiffener reducer and nipple with

check nut complete painted with one coat.of Red oxide / PU

base primer and two coats of Aluminium / PU paint. paint

with following nos of arms. [A] Single Arm bracket 0.5 Mtr[6-

Item Rate In

Description of Item Quantity Unit Amount

No figures

153 Supplying and erecting Street light pole bracket comprising 2.00 Nos 569.64

main B Class MS pipe of 4.2 cm/require outside dia. complete

with suitable B Class M.S. sleeve tubing of approx.

45cms.length and suitable for 76.5mm/80mm/require size of

pole top having nuts and bolts for fixing the brackets and

having spread of 0.5 mtr. Length with 110 deg.with vertical

plane and suitable welded stiffener reducer and nipple with

check nut complete painted with one coat.of Red oxide / PU

base primer and two coats of Aluminium / PU paint. paint

with following nos of arms. [B] Double Arm Bracket

154 Making trench in soft soil of suitable width of 90 cm deep for 120.00 Mtr 55.55

laying cable or locating the fault all over the run and back

filling the same and making the surface as normal ground.[4-

155 Providing & laying approved make Double walled corrugated 120.00 Mtr 62.62

pipes (DWC) of polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same material at

required depth in existing trench for laying of cable. below

ground / road surface for enclosing cable(A)50 mm outer

156 SITC of Vertical Air Termination Solid aluminium with Base- 1.00 Each 9416.23

10 mm dia and 1000 mm long. Air Termination Base tested

for conditioning, Ageing Test & Lightning impulse current

withstand test: 100 kA of 10/350µs waveform in an

accredited Third party laboratory as per 6.3 & 6.4 of IEC

62561-1 2017 protocol with MAST 34mm dia 3000 mm long-

Cold Galvanized[10-5-1]

157 SITC of 8 mm dia solid Aluminium Conductor for roof top 50.00 Mtr 299.97

mesh grid and tested as per IEC 62561- 2 conducted in the

Govt. accredited thirty party laboratory to meet the

requirement of IS/IEC 62305 with Required Accessories -

Aluminium Holding clamp at every 1 mtr distance,

Aluminium/SS cross splicer at every crossing of Alu.

conductor, Expansion piece with connectors at every 20 mtr

distance, Aluminium straight Splicer to connect conductors.

All Accessories should be tested as per IEC 62561-1 2018 Cl.

6.3 for conditioning & Ageing Test & 6.4 for Lightning

impulse current withstand test: 100 kA of 10/350µs

waveform(Ageing & Electrical test ) conducted in a sequence

manner & tested in the Govt. accredited Third party

laboratory to meet the requirements of IS/IEC 6230[10-5-2]

Item Rate In

Description of Item Quantity Unit Amount

No figures

158 SITC of 14.2 mm dia 3 mtr long Earth electrode of High tensile 1.00 Per Set 5992.33

steel electrode with 250 micron copper bonding & 1 bag of

Carbon fill Based environment friendly backfill tested as per

IEC 62561-7 in NABL accredited Laboratory and suitable

stainless Steel double sided clamp. Eco Friendly rust proof

heavy duty weather proof Polyethylene Earth Pit Chamber

with following dimensions :254 mm dia (top), 330 mm dia

(bottom) & 260 mm (height).[10-5-5]

Total Rs.

Fifty lakh sixty two thousand fifty five rupees and forty one paisa only.

I/We am/are willing to carry out the work at………………….% above/below percent(Should be written in figures and words) of

the estimated rate mentioned above. Amount of my /our

Tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

In words In words

The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-

Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 Income tax TDS will be deducted at a source while making payments of bills

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017

Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change

4 as per actual mix design the cost of difference of cement consumption have been deducted from the rate of original

item at the rate of input rate mentioned in all the tender.

5 GST will be paid Extra as per Govt. amendment

Executive Engineer,

Tapi ( R & B ) Division