ADDN/ALTN TO WATCH TOWER AT GANDHINAGAR, PROVN OF INTERLOCKING TILES AT STN HQ AND PROVN OF BRICK AND JAFFERY WALL AT CERTAIN LOCATION AT GANDHINAGAR UNDER GE (AF) CHILODA

Amount

Excavation in trenches, not exceeding 1.5m wide and not exc. 1.5m in depth for foundations etc. n.exc. 10 Sqm on plan and getting out in soft/loose soil complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation,floor complete all as specified and as directed.

M&L for Brick work with fly ash brick, old size bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for Machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed.

S&F pre-coated galvalume aluminium zink coating GI based corrugated steel sheet 0.50mm thick of colour having tensile strength of 550Mpa as in roof covering fixed with self tapping screw complete all as specified and directed.

M&L for Granite 18 to 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

S&F in repair Stainless steel sink with drainage board made out of 1 mm thick sheet of overall size 915x460mm with bowl size 410x330 x160mm with plugs washers, CP waste coupling and 40mm dia GI light grade waste pipe upto chamber fixed on and including cantilever angle iron 25x25x6mm (2 Nos) brackets complete including making good the disturbed surface using PCC 1:2:4 type B-I using 20 mm graded stone aggregate complete all as specified and directed.

Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing),removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed.

M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4 to receive tiles etc on vertical surfaces of walls complete all as specified and directed.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 SQM but not exceeding 0.11 SQM, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Glazed ceramic coloured tiles in vertical surfaces 350x250x7mm/ 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 SQM but not exceeding 0.18 SQM, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Taking down cement or cement lime plaster any description incl racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed. Note :- Repairs in patch work.

M&L for rendering 10mm thick plaster in CM 1:6 on fair faces of brick work or concrete surfaces of walls finished even & smooth with out using extra cement complete all as specified and directed.

M&L for rendering 15mm thick plaster in CM 1:4 on fair faces of brick work or concrete surfaces of walls finished even & smooth with out using extra cement complete all as specified and directed.

M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M & L preparing new surface of wall and applying two coat of oil emulsion distemper over a coat of chalk whiting complete all as specified and directed.

M & L preparing new surface of wall and applying two coat of cement base paint over a coat of chalk whiting complete all as specified and directed.

M&L for preparation of old surfaces of ceiling and applying one coat of white wash complete all as specified and directed.

M&L for preparation of old surfaces of wall and applying one coat of white wash complete all as specified and directed.

M&L for preparing of old surfaces of walls and applying two coat of distemper oil emulsion complete all as specified and directed.

M&L for preparing of old surfaces of walls and applying two coat of cement based paint complete all as specified and directed.

M&L for preparing of old surfaces of wall and applying two coat of acrylic weather coat paint complete all as specified and directed.

M&L for preparation of old painted steel and iron surfaces of any description over 10cm width or girth not otherwise described and applying one coats of synthetic enamel paint complete all as specified and directed.

Taking down Shutters of any description exc 1 sqm but not exc 2 sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) size exc 1.5 Sqm & not exc 4.00 Sqm each complete all as specified and directed.

M&L 30mm thick flush door shutter, solid core construction with block board core and ply wood face panels, commercial type on both faces complete all as specified and directed.

M&L for glazed and skeleton shutters 30 mm thick 1st class hard wood open rebated and prepared to receive glass divided into squares rebated sash bars any numbers, edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass, sizes of memebres as specified in SSR Part-I section 8 clause 8.24 (a) supply and fixed to chowkat, complete all as specified and directed.

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with MS screw & bolts in repairs complete all as specified and directed.

S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC Sheet rainforced with MS square tube complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

S&F aluminum alloy, anodized, sliding door bolt of length 250mm with hasp & staple (bolt type) & fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy.

S&F 150mm size aluminum handles, cast type anodised.

S&F aluminum anodized barrel tower bolt of extruded section, length of bolt 150mm.

S&F 100mm size butt hinges, medium weight, cold rolled mild steel.

S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F Frosted glass ordinary quality 4mm thick, glazing with oil putty in square n exc 0.5 Sqm in each pane complete all as specified and directed.

Taking up or down steel /UPVC water tubing and connections,15 mm bore complete all as specified and directed.

S&F 15mm dia tubes ‘Medium grade’ galvanized with all fittings and fixed complete to walls and ceiling or laid in floors, complete all as specified and directed.

Taking up or down steel /UPVC water tubing and connections, 20 mm bore complete all as specified and directed.

S&F 20 mm water tubes, 'Meduim grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S & F in repair vitreous china wash hand basin, flat back, size 550x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed.

S&F in repairs vitreous China squatting pan, orissa pattern of size 580x440mm, white with integral foot rest incl connection to trap & flushing pipe complete all as specified and directed.

S&F in repairs 10 litres capacity PVC valveless symphonic action type, flushing cistern, low level, white, with inlet, ball valve float handle including brackets complete all as specified and directed.

S&F in repair 32mm brass chromium plated waste coupling for wash hand basin complete all as specified and directed.

S&F Pillar taps, cast copper alloy, with capstan heads, chromium platedscrewed down highpressure, with orwithout lettered 'Hot' or 'Cold' withlong screwedshanks and fly-nuts,screwed for iron pipe and fixed to 15mm bore pipe complete all as specified and directed.

S & F in repairs Bib taps fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed to 15mm bore pipe complete all as specified and directed.

S&F in repairs Stop valves fancy type cast copper alloy,screwed down,high pressure,with crutch orbutterfly handle,screwed bothends for iron pipe or fo runions and fixed to15mm bore pipe complete all as specified and directed.

Supply and fix in repairs 32 mm size waste pipe for wash hand basin / urinal / sink complete all as specified and directed.

S&F in repairs Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) complete all as specified and directed.

M&L for 75mm thick Cement concrete Type D2 1:4:8 (40 mm graded graded aggregate) as in floor finishes and pavings complete all as specified and directed.

M&L for 20 mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed.

M & L Chequred cement concrete tiles 20cm x20cmx 25mm thick with grey cement and pigment , set jointed in neat cement slurry complete all as specified as directed.

Surface excavtion n.exc 30 cm deep and averaging 15 cm deep soft and loose soil complete all as specified and directed.

M&L for hardcore using broken stone or boulders not exc 63mm deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 100mm thick cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base complete all as specified and directed.

M&L machine pressed precast cement concrete interlocking paver block any shape and size confirming to IS-15658-2006 of 60mm thickness M-35 Grade with grey cement and pigment jointed in neat cement slurry and pointed in cement mixed with pigment to match the shade of paver block complete all as specified and directed by Engineer-in-Charge.

M & L 25 mm sand filling under floors or in foundation incl watering and consolidation complete all as specified and directed by Engineer-in-Charge.

M& L factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever complete all as specified and directed.

S & F PVC connection 15 mm size with PTMT nuts on both end, length 450 mm, including taking down old PVC connection complete all as specified and directed.

Demolition of cement concrete of (unreinforced) any description and in any position not otherwise specified.

M&L cement concrete type B1 1:2:4 (20mm graded aggregate) for plinth protection etc. complete all as specified and directed.

S&F modular Wardrobe shutter type including drawer, 18mm MR grade plywood anti termite decorative type with 1mm laminated for interior with lock including all fittings/accessaries complete all as specified and directed.

M&L machine pressed precast cement concrete interlocking paver block any shape and size confirming to IS-15658-2006 of 80mm thickness M-40 Grade with grey cement and pigment jointed in neat cement slurry and pointed in cement mixed with pigment to match the shade of paver block complete all as specified and directed by Engineer-in-Charge.

Removal of excavated soil to a distance not exc 50 m and deposited where directed at a level not exc 1.5 m above the starting point complete all as specified and directed.

M&L for damp proof course 20mm thick in cement mortar 1:2 with using water proofing compound to horizontal or vertical surfaces including necessary formwork complete all as specified and directed. (Note : WPC Shall be measured and paid separately.)

Supply only Integral waterproofing compound for DPC.

M&L for providing precast cement concret jalies 50mm thick Type B0 1:2:4 (12.5mm graded aggregate) set in cement mortar 1:4 complete all as specified and directed.

M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc in flat surface. also splays between floors and beams, etc.complete all as specified and directed.

M&L Reinforced Cement concrete (nominal mix)1:2:4 type B1 using 20 mm graded stone aggregate as in Beams, cantilevers, bressumm?ers, lintels over 1.5m span complete all as specified and directed .

S&F MS TMT bars 10 mm and above , cut to length ,bent to shape required , including cranking , bending , spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in reinforcement complete all as specified and directed.

S&F Mild steel TMT bars 5mm dia & over upto & including 10mm dia in stirrups, spacers & binders, cut to length, bent to shape required, binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and appplying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm avaible from distance not exc. 50 m complete all as specified and directed.

S&F Framed work as in doors / gates of angle or other section etc door to be prepared for hanging or sliding on hinges or rail etc complete all as specified and directed.

TECH SERVE SOLUTIONS

divyarsh entrprise

JIYA CONSTRUCTION

Shreeganesh Construction